hpe.nimble.hpe_nimble_protection_schedule module – Manage the HPE Nimble Storage protection schedules

Note

This module is part of the hpe.nimble collection (version 1.1.4).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install hpe.nimble. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: hpe.nimble.hpe_nimble_protection_schedule.

New in hpe.nimble 1.0.0

Synopsis

  • Manage the protection schedules on an HPE Nimble Storage group.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9 or later

  • Python 3.6 or later

  • HPE Nimble Storage SDK for Python

  • HPE Nimble Storage arrays running NimbleOS 5.0 or later

Parameters

Parameter

Comments

at_time

integer

Time of day when snapshot should be taken. In case repeat frequency specifies more than one snapshot in a day then the until_time option specifies until what time of day to take snapshots.

Default: 0

change_name

string

Change the name of existing protection schedule.

days

string

Specifies which days snapshots should be taken. Comma separated list of days of the week or ‘all’.

description

string

Description of the schedule.

disable_appsync

boolean

Disables application synchronized snapshots and creates crash consistent snapshots instead.

Choices:

  • false

  • true

downstream_partner

string

Specifies the partner name if snapshots created by this schedule should be replicated.

host

string / required

HPE Nimble Storage IP address.

name

string / required

Name of the protection schedule to create.

num_retain

integer

Number of snapshots to retain. If replication is enabled on this schedule the array will always retain the latest replicated snapshot, which may exceed the specified retention value. This is necessary to ensure efficient replication performance.

num_retain_replica

integer

Number of snapshots to retain on the replica.

Default: 0

password

string / required

HPE Nimble Storage password.

period

integer

Repeat interval for snapshots with respect to the period_unit. For example, a value of 2 with the ‘period_unit’ of ‘hours’ results in one snapshot every 2 hours.

period_unit

string

Time unit over which to take the number of snapshots specified in ‘period’. For example, a value of ‘days’ with a ‘period’ of ‘1’ results in one snapshot every day.

Choices:

  • "minutes"

  • "hours"

  • "days"

  • "weeks"

prot_template_name

string

Name of the protection template in which this protection schedule is attached to.

repl_alert_thres

integer

Replication alert threshold in seconds. If the replication of a snapshot takes more than this amount of time to complete an alert will be generated. Enter 0 to disable this alert.

replicate_every

integer

Specifies which snapshots should be replicated. If snapshots are replicated and this option is not specified, every snapshot is replicated.

schedule_type

string

Normal schedules have internal timers which drive snapshot creation. An externally driven schedule has no internal timers. All snapshot activity is driven by an external trigger. In other words, these schedules are used only for externally driven manual snapshots.

Choices:

  • "regular"

  • "external_trigger"

skip_db_consistency_check

boolean

Skip consistency check for database files on snapshots created by this schedule. This option only applies to snapshot schedules of a protection template with application synchronization set to VSS, application ID set to MS Exchange 2010 or later w/DAG, this schedule’s snap_verify option set to yes, and its disable_appsync option set to false. Skipping consistency checks is only recommended if each database in a DAG has multiple copies.

Choices:

  • false

  • true

snap_verify

boolean

Run verification tool on snapshot created by this schedule. This option can only be used with snapshot schedules of a protection template that has application synchronization. The tool used to verify snapshot depends on the type of application. For example, if application synchronization is VSS and the application ID is Exchange, eseutil tool is run on the snapshots. If verification fails, the logs are not truncated.

Choices:

  • false

  • true

state

string / required

The protection schedule operations

Choices:

  • "present"

  • "absent"

  • "create"

until_time

integer

Time of day to stop taking snapshots. Applicable only when repeat frequency specifies more than one snapshot in a day.

use_downstream_for_DR

boolean

Break synchronous replication for the specified volume collection and present downstream volumes to host(s). Downstream volumes in the volume collection will be set to online and presented to the host(s) using new serial and LUN numbers. No changes will be made to the upstream volumes, their serial and LUN numbers, and their online state. The existing ACLs on the upstream volumes will be copied to the downstream volumes. Use this in conjunction with an empty downstream_partner_id. This unconfigures synchronous replication when the partner is removed from the last replicating schedule in the specified volume collection and presents the downstream volumes to host(s). Host(s) will need to be configured to access the new volumes with the newly assigned serial and LUN numbers. Use this option to expose downstream volumes in a synchronously replicated volume collection to host(s) only when the upstream partner is confirmed to be down and there is no communication between partners. Do not execute this operation if a previous Group Management Service takeover has been performed on a different array. Do not perform a subsequent Group Management Service takeover on a different array as it will lead to irreconcilable conflicts. This limitation is cleared once the Group management service backup array has successfully synchronized after reconnection.

Choices:

  • false

  • true

username

string / required

HPE Nimble Storage user name.

volcoll_name

string

Name of the volume collection in which this protection schedule is attached to.

volcoll_or_prottmpl_type

string / required

Type of the protection policy this schedule is attached to.

Choices:

  • "protection_template"

  • "volume_collection"

Notes

Note

  • This module does not support check_mode.

Examples

# if state is create , then create a protection schedule if not present. Fails if already present.
# if state is present, then create a protection schedule if not present. Succeed if it already exists.
- name: Create protection schedule if not present
  hpe.nimble.hpe_nimble_protection_schedule:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    name: "{{ name }}"
    description: "{{ description | default(None)}}"
    state: "{{ state | default('present') }}"
    volcoll_or_prottmpl_type: "{{ volcoll_or_prottmpl_type }}"
    prot_template_name: "{{ prot_template_name }}"
    num_retain: "{{ num_retain }}"

- name: Delete protection schedule
  hpe.nimble.hpe_nimble_protection_schedule:
    host: "{{ host }}"
    username: "{{ username }}"
    password: "{{ password }}"
    name: "{{ name }}"
    volcoll_or_prottmpl_type: "{{ volcoll_or_prottmpl_type }}"
    volcoll_name: "{{ volcoll_name }}"
    state: absent

Authors

  • Alok Ranjan (@ranjanal)