junipernetworks.junos.junos_bgp_global module – Manages BGP Global configuration on devices running Juniper JUNOS.

Note

This module is part of the junipernetworks.junos collection (version 5.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_bgp_global.

New in junipernetworks.junos 1.3.0

Synopsis

  • This module manages global bgp configuration on devices running Juniper JUNOS.

Note

This module has a corresponding action plugin.

Aliases: bgp_global

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

  • xmltodict (>=0.12.0)

Parameters

Parameter

Comments

config

dictionary

A list of BGP process configuration.

accept_remote_nexthop

boolean

Allow import policy to specify a non-directly connected next-hop.

Choices:

  • false

  • true

add_path_display_ipv4_address

boolean

Display add-path path-id in IPv4 address format.

Choices:

  • false

  • true

advertise_bgp_static

dictionary

Advertise bgp-static routes.

policy

string

Specify static route advertisement policy.

set

boolean

Set Advertise bgp-static routes.

Choices:

  • false

  • true

advertise_external

dictionary

Advertise best external routes.

conditional

boolean

Route matches active route upto med-comparison rule.

Choices:

  • false

  • true

set

boolean

Set Advertise best external routes.

Choices:

  • false

  • true

advertise_from_main_vpn_tables

boolean

Advertise VPN routes from bgp.Xvpn.0 tables in master instance.

Choices:

  • false

  • true

advertise_inactive

boolean

Advertise inactive routes.

Choices:

  • false

  • true

advertise_peer_as

boolean

Advertise routes received from the same autonomous system.

Choices:

  • false

  • true

as_number

string

Specify Autonomous system number.

asdot_notation

boolean

Enable AS-Dot notation to display true 4 byte AS numbers.

Choices:

  • false

  • true

authentication_algorithm

string

Specify authentication algorithm name.

Choices:

  • "aes-128-cmac-96"

  • "hmac-sha-1-96"

  • "md5"

authentication_key

string

Specify MD5 authentication key.

authentication_key_chain

string

Specify authentication key chain name.

bfd_liveness_detection

dictionary

Bidirectional Forwarding Detection (BFD) options.

authentication

dictionary

Authentication options.

algorithm

string

Specify algorithm name.

Choices:

  • "keyed-md5"

  • "keyed-sha-1"

  • "meticulous-keyed-md5"

  • "meticulous-keyed-sha-1"

  • "simple-password"

key_chain

string

Specify Key chain name.

loose_check

boolean

Verify authentication only if authentication is negotiated.

Choices:

  • false

  • true

detection_time

dictionary

Specify Detection-time optionss.

threshold

integer

Specify high detection-time triggering a trap (milliseconds).

holddown_interval

integer

Specify time to hold the session-UP notification to the client.

minimum_interval

integer

Specify minimum transmit and receive interval.

minimum_receive_interval

integer

Specify minimum receive interval.

multiplier

integer

Specify detection time multiplier.

no_adaptation

boolean

Disable adaptation.

Choices:

  • false

  • true

session_mode

string

BFD single-hop or multihop session-mode.

Choices:

  • "automatic"

  • "multihop"

  • "single-hop"

transmit_interval

dictionary

Transmit-interval options.

minimum_interval

integer

Specify Minimum transmit interval.

threshold

integer

Specify high transmit interval triggering a trap.

version

string

Specify BFD protocol version number.

Choices:

  • "0"

  • "1"

  • "automatic"

bgp_error_tolerance

dictionary

Handle BGP malformed updates softly.

malformed_route_limit

integer

Maximum number of malformed routes from a peer.

malformed_update_log_interval

integer

Time used when logging malformed update.

no_malformed_route_limit

boolean

Specify no malformed route limit.

Choices:

  • false

  • true

set

boolean

Set BGP malformed updates softly.

Choices:

  • false

  • true

bmp

dictionary

Specific settings to override the routing-options settings.

monitor

boolean

Enable/Disable monitoring.

Choices:

  • false

  • true

route_monitoring

dictionary

Control route monitoring settings.

none

boolean

Do not send route montoring messages.

Choices:

  • false

  • true

post_policy

boolean

Send post policy route montoring messages.

Choices:

  • false

  • true

post_policy_exclude_non_eligible

boolean

Send post policy route montoring messages and exclude unresolved routes, etc.

Choices:

  • false

  • true

post_policy_exclude_non_feasible

boolean

Send pre policy route montoring messages and exclude looped routes, etc.

Choices:

  • false

  • true

pre_policy

boolean

Send pre policy route montoring messages.

Choices:

  • false

  • true

cluster_id

string

Specify cluster identifier.

damping

boolean

Enable route flap damping.

Choices:

  • false

  • true

description

string

Specify text description.

disable

boolean

Disable BGP.

Choices:

  • false

  • true

egress_te

dictionary

Use Egress Peering traffic engineering.

backup_path

string

The ‘egress-te-backup-paths template’ to use for this peer.

set

boolean

Set the attribute.

Choices:

  • false

  • true

egress_te_backup_paths

dictionary

Backup-path for Egress-TE peer interface failure.

templates

list / elements=dictionary

Specify Backup-path template.

ip_forward

dictionary

Use IP-forward backup path for Egress TE.

rti_name

string

Routing-instance to use as IP forward backup-path.

set

boolean

Set use IP-forward backup path for Egress TE.

Choices:

  • false

  • true

path_name

string / required

Name of Egress-TE backup path.

peers

list / elements=string

Specify address of BGP peer to use as backup next-hop.

remote_nexthop

string

Specify address of remote-nexthop to use as backup path.

egress_te_set_segment

list / elements=dictionary

Configure BGP-Peer-Set segment.

egress_te_backup_segment_label

integer

BGP-Peer-Set SID label value from static label pool.

label

integer

Backup segment label value from static label pool.

name

string / required

The BGP-Peer-Set segment name.

egress_te_sid_stats

boolean

Create BGP-Peer-SID sensor.

Choices:

  • false

  • true

enforce_first_as

boolean

Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP).

Choices:

  • false

  • true

export

string

Specify export policy.

forwarding_context

string

Specify routing-instance used for data-forwarding and transport-session.

graceful_restart

dictionary

BGP graceful restart options.

disable

boolean

Disable graceful restart.

Choices:

  • false

  • true

dont_help_shared_fate_bfd_down

boolean

Honor BFD-Down(C=0) if GR-restart not in progress.

Choices:

  • false

  • true

forwarding_state_bit

dictionary

Control forwarding-state flag negotiation.

as_rr_client

boolean

As for a route reflector client.

Choices:

  • false

  • true

from_fib

boolean

Always use state of associated FIB(s).

Choices:

  • false

  • true

long_lived

dictionary

Long-lived graceful restart options.

advertise_to_non_llgr_neighbor

dictionary

Advertise stale routes to non-LLGR neighbors.

omit_no_export

boolean

Set Advertise stale routes to non-LLGR neighbors.

Choices:

  • false

  • true

set

boolean

Set Advertise stale routes to non-LLGR neighbors.

Choices:

  • false

  • true

receiver_disable

boolean

Disable receiver (helper) functionality.

Choices:

  • false

  • true

restart_time

integer

Restart time used when negotiating with a peer.

set

boolean

Set BGP graceful restart options.

Choices:

  • false

  • true

stale_routes_time

integer

Maximum time for which stale routes are kept.

groups

list / elements=dictionary

Specify name of the group.

accept_remote_nexthop

boolean

Allow import policy to specify a non-directly connected next-hop.

Choices:

  • false

  • true

add_path_display_ipv4_address

boolean

Display add-path path-id in IPv4 address format.

Choices:

  • false

  • true

advertise_bgp_static

dictionary

Advertise bgp-static routes.

policy

string

Specify static route advertisement policy.

set

boolean

Set Advertise bgp-static routes.

Choices:

  • false

  • true

advertise_external

dictionary

Advertise best external routes.

conditional

boolean

Route matches active route upto med-comparison rule.

Choices:

  • false

  • true

set

boolean

Set Advertise best external routes.

Choices:

  • false

  • true

advertise_inactive

boolean

Advertise inactive routes.

Choices:

  • false

  • true

advertise_peer_as

boolean

Advertise routes received from the same autonomous system.

Choices:

  • false

  • true

allow

list / elements=string

Configure peer connections for specific networks.

as_override

boolean

Replace neighbor AS number with our AS number

Choices:

  • false

  • true

authentication_algorithm

string

Specify authentication algorithm name.

Choices:

  • "aes-128-cmac-96"

  • "hmac-sha-1-96"

  • "md5"

authentication_key

string

Specify MD5 authentication key.

authentication_key_chain

string

Specify authentication key chain name.

bfd_liveness_detection

dictionary

Bidirectional Forwarding Detection (BFD) options.

authentication

dictionary

Authentication options.

algorithm

string

Specify algorithm name.

Choices:

  • "keyed-md5"

  • "keyed-sha-1"

  • "meticulous-keyed-md5"

  • "meticulous-keyed-sha-1"

  • "simple-password"

key_chain

string

Specify Key chain name.

loose_check

boolean

Verify authentication only if authentication is negotiated.

Choices:

  • false

  • true

detection_time

dictionary

Specify Detection-time optionss.

threshold

integer

Specify high detection-time triggering a trap (milliseconds).

holddown_interval

integer

Specify time to hold the session-UP notification to the client.

minimum_interval

integer

Specify minimum transmit and receive interval.

minimum_receive_interval

integer

Specify minimum receive interval.

multiplier

integer

Specify detection time multiplier.

no_adaptation

boolean

Disable adaptation.

Choices:

  • false

  • true

session_mode

string

BFD single-hop or multihop session-mode.

Choices:

  • "automatic"

  • "multihop"

  • "single-hop"

transmit_interval

dictionary

Transmit-interval options.

minimum_interval

integer

Specify Minimum transmit interval.

threshold

integer

Specify high transmit interval triggering a trap.

version

string

Specify BFD protocol version number.

Choices:

  • "0"

  • "1"

  • "automatic"

bgp_error_tolerance

dictionary

Handle BGP malformed updates softly.

malformed_route_limit

integer

Maximum number of malformed routes from a peer.

malformed_update_log_interval

integer

Time used when logging malformed update.

no_malformed_route_limit

boolean

Specify no malformed route limit.

Choices:

  • false

  • true

set

boolean

Set BGP malformed updates softly.

Choices:

  • false

  • true

bmp

dictionary

Specific settings to override the routing-options settings.

monitor

boolean

Enable/Disable monitoring.

Choices:

  • false

  • true

route_monitoring

dictionary

Control route monitoring settings.

none

boolean

Do not send route montoring messages.

Choices:

  • false

  • true

post_policy

boolean

Send post policy route montoring messages.

Choices:

  • false

  • true

post_policy_exclude_non_eligible

boolean

Send post policy route montoring messages and exclude unresolved routes, etc.

Choices:

  • false

  • true

post_policy_exclude_non_feasible

boolean

Send pre policy route montoring messages and exclude looped routes, etc.

Choices:

  • false

  • true

pre_policy

boolean

Send pre policy route montoring messages.

Choices:

  • false

  • true

cluster_id

string

Specify cluster identifier.

damping

boolean

Enable route flap damping.

Choices:

  • false

  • true

description

string

Specify text description.

egress_te

dictionary

Use Egress Peering traffic engineering.

backup_path

string

The ‘egress-te-backup-paths template’ to use for this peer.

set

boolean

Set the attribute.

Choices:

  • false

  • true

enforce_first_as

boolean

Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP).

Choices:

  • false

  • true

export

string

Specify export policy.

forwarding_context

string

Specify routing-instance used for data-forwarding and transport-session.

graceful_restart

dictionary

BGP graceful restart options.

disable

boolean

Disable graceful restart.

Choices:

  • false

  • true

dont_help_shared_fate_bfd_down

boolean

Honor BFD-Down(C=0) if GR-restart not in progress.

Choices:

  • false

  • true

forwarding_state_bit

dictionary

Control forwarding-state flag negotiation.

as_rr_client

boolean

As for a route reflector client.

Choices:

  • false

  • true

from_fib

boolean

Always use state of associated FIB(s).

Choices:

  • false

  • true

long_lived

dictionary

Long-lived graceful restart options.

advertise_to_non_llgr_neighbor

dictionary

Advertise stale routes to non-LLGR neighbors.

omit_no_export

boolean

Set Advertise stale routes to non-LLGR neighbors.

Choices:

  • false

  • true

set

boolean

Set Advertise stale routes to non-LLGR neighbors.

Choices:

  • false

  • true

receiver_disable

boolean

Disable receiver (helper) functionality.

Choices:

  • false

  • true

restart_time

integer

Restart time used when negotiating with a peer.

set

boolean

Set BGP graceful restart options.

Choices:

  • false

  • true

stale_routes_time

integer

Maximum time for which stale routes are kept.

hold_time

integer

Specify hold time used when negotiating with a peer.

idle_after_switch_over

dictionary

Stop peer session from coming up after nonstop-routing switch-over.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

timeout

integer

Specify timeout value, in seconds, for starting peer after switch over.

import

list / elements=string

Specify import policy.

include_mp_next_hop

boolean

Include NEXT-HOP attribute in multiprotocol updates.

Choices:

  • false

  • true

ipsec_sa

string

Specify IPSec SA name.

keep

string

Specify how to retain routes in the routing table.

Choices:

  • "all"

  • "none"

local_address

string

Specify Address of local end of BGP session.

local_as

dictionary

Local autonomous system number.

alias

boolean

Treat this AS as an alias to the system AS.

Choices:

  • false

  • true

as_num

string / required

Autonomous system number in plain number or (asdot notation) format.

loops

integer

Maximum number of times this AS can be in an AS path.

no_prepend_global_as

boolean

Maximum number of times this AS can be in an AS path.

Choices:

  • false

  • true

private

boolean

Hide this local AS in paths learned from this peering.

Choices:

  • false

  • true

local_interface

string

Specify Local interface for IPv6 link local EBGP peering.

local_preference

string

Specify value of LOCAL_PREF path attribute.

log_updown

boolean

Enable log a message for peer state transitions.

Choices:

  • false

  • true

metric_out

dictionary

Specify route metric sent in MED.

igp

dictionary

Track the IGP metric.

delay_med_update

boolean

Delay updating MED when IGP metric increases.

Choices:

  • false

  • true

metric_offset

integer

Specify metric offset for MED.

set

boolean

Set track the IGP metric.

Choices:

  • false

  • true

metric_value

integer

Specify metric value.

minimum_igp

dictionary

Track the minimum IGP metric.

metric_offset

integer

Specify metric offset for MED.

set

boolean

Set track the minimum IGP metric.

Choices:

  • false

  • true

mtu_discovery

boolean

Enable TCP path MTU discovery.

Choices:

  • false

  • true

multihop

dictionary

Configure an EBGP multihop session.

no_nexthop_change

boolean

Do not change next hop to self in advertisements.

Choices:

  • false

  • true

set

boolean

Set an EBGP multihop session.

Choices:

  • false

  • true

ttl

integer

TTL value for the session.

multipath

dictionary

Allow load sharing among multiple BGP paths.

disable

boolean

Disable Multipath.

Choices:

  • false

  • true

multiple_as

boolean

Use paths received from different ASs.

Choices:

  • false

  • true

multiple_as_disable

boolean

Disable multipath.

Choices:

  • false

  • true

set

boolean

Set allow load sharing among multiple BGP paths.

Choices:

  • false

  • true

name

string

Specify the name of the group

neighbors

list / elements=dictionary

Specify list of neighbors.

accept_remote_nexthop

boolean

Allow import policy to specify a non-directly connected next-hop.

Choices:

  • false

  • true

add_path_display_ipv4_address

boolean

Display add-path path-id in IPv4 address format.

Choices:

  • false

  • true

advertise_bgp_static

dictionary

Advertise bgp-static routes.

policy

string

Specify static route advertisement policy.

set

boolean

Set Advertise bgp-static routes.

Choices:

  • false

  • true

advertise_external

dictionary

Advertise best external routes.

conditional

boolean

Route matches active route upto med-comparison rule.

Choices:

  • false

  • true

set

boolean

Set Advertise best external routes.

Choices:

  • false

  • true

advertise_inactive

boolean

Advertise inactive routes.

Choices:

  • false

  • true

advertise_peer_as

boolean

Advertise routes received from the same autonomous system.

Choices:

  • false

  • true

as_override

boolean

Replace neighbor AS number with our AS number

Choices:

  • false

  • true

authentication_algorithm

string

Specify authentication algorithm name.

Choices:

  • "aes-128-cmac-96"

  • "hmac-sha-1-96"

  • "md5"

authentication_key

string

Specify MD5 authentication key.

authentication_key_chain

string

Specify authentication key chain name.

bfd_liveness_detection

dictionary

Bidirectional Forwarding Detection (BFD) options.

authentication

dictionary

Authentication options.

algorithm

string

Specify algorithm name.

Choices:

  • "keyed-md5"

  • "keyed-sha-1"

  • "meticulous-keyed-md5"

  • "meticulous-keyed-sha-1"

  • "simple-password"

key_chain

string

Specify Key chain name.

loose_check

boolean

Verify authentication only if authentication is negotiated.

Choices:

  • false

  • true

detection_time

dictionary

Specify Detection-time optionss.

threshold

integer

Specify high detection-time triggering a trap (milliseconds).

holddown_interval

integer

Specify time to hold the session-UP notification to the client.

minimum_interval

integer

Specify minimum transmit and receive interval.

minimum_receive_interval

integer

Specify minimum receive interval.

multiplier

integer

Specify detection time multiplier.

no_adaptation

boolean

Disable adaptation.

Choices:

  • false

  • true

session_mode

string

BFD single-hop or multihop session-mode.

Choices:

  • "automatic"

  • "multihop"

  • "single-hop"

transmit_interval

dictionary

Transmit-interval options.

minimum_interval

integer

Specify Minimum transmit interval.

threshold

integer

Specify high transmit interval triggering a trap.

version

string

Specify BFD protocol version number.

Choices:

  • "0"

  • "1"

  • "automatic"

bgp_error_tolerance

dictionary

Handle BGP malformed updates softly.

malformed_route_limit

integer

Maximum number of malformed routes from a peer.

malformed_update_log_interval

integer

Time used when logging malformed update.

no_malformed_route_limit

boolean

Specify no malformed route limit.

Choices:

  • false

  • true

set

boolean

Set BGP malformed updates softly.

Choices:

  • false

  • true

bmp

dictionary

Specific settings to override the routing-options settings.

monitor

boolean

Enable/Disable monitoring.

Choices:

  • false

  • true

route_monitoring

dictionary

Control route monitoring settings.

none

boolean

Do not send route montoring messages.

Choices:

  • false

  • true

post_policy

boolean

Send post policy route montoring messages.

Choices:

  • false

  • true

post_policy_exclude_non_eligible

boolean

Send post policy route montoring messages and exclude unresolved routes, etc.

Choices:

  • false

  • true

post_policy_exclude_non_feasible

boolean

Send pre policy route montoring messages and exclude looped routes, etc.

Choices:

  • false

  • true

pre_policy

boolean

Send pre policy route montoring messages.

Choices:

  • false

  • true

cluster_id

string

Specify cluster identifier.

damping

boolean

Enable route flap damping.

Choices:

  • false

  • true

description

string

Specify neighbor description.

egress_te

dictionary

Use Egress Peering traffic engineering.

backup_path

string

The ‘egress-te-backup-paths template’ to use for this peer.

set

boolean

Set the attribute.

Choices:

  • false

  • true

enforce_first_as

boolean

Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP).

Choices:

  • false

  • true

export

string

Specify export policy.

forwarding_context

string

Specify routing-instance used for data-forwarding and transport-session.

graceful_restart

dictionary

BGP graceful restart options.

disable

boolean

Disable graceful restart.

Choices:

  • false

  • true

dont_help_shared_fate_bfd_down

boolean

Honor BFD-Down(C=0) if GR-restart not in progress.

Choices:

  • false

  • true

forwarding_state_bit

dictionary

Control forwarding-state flag negotiation.

as_rr_client

boolean

As for a route reflector client.

Choices:

  • false

  • true

from_fib

boolean

Always use state of associated FIB(s).

Choices:

  • false

  • true

long_lived

dictionary

Long-lived graceful restart options.

advertise_to_non_llgr_neighbor

dictionary

Advertise stale routes to non-LLGR neighbors.

omit_no_export

boolean

Set Advertise stale routes to non-LLGR neighbors.

Choices:

  • false

  • true

set

boolean

Set Advertise stale routes to non-LLGR neighbors.

Choices:

  • false

  • true

receiver_disable

boolean

Disable receiver (helper) functionality.

Choices:

  • false

  • true

restart_time

integer

Restart time used when negotiating with a peer.

set

boolean

Set BGP graceful restart options.

Choices:

  • false

  • true

stale_routes_time

integer

Maximum time for which stale routes are kept.

hold_time

integer

Specify hold time used when negotiating with a peer.

idle_after_switch_over

dictionary

Stop peer session from coming up after nonstop-routing switch-over.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

timeout

integer

Specify timeout value, in seconds, for starting peer after switch over.

import

list / elements=string

Specify import policy.

include_mp_next_hop

boolean

Include NEXT-HOP attribute in multiprotocol updates.

Choices:

  • false

  • true

ipsec_sa

string

Specify IPSec SA name.

keep

string

Specify how to retain routes in the routing table.

Choices:

  • "all"

  • "none"

local_address

string

Specify Address of local end of BGP session.

local_as

dictionary

Local autonomous system number.

alias

boolean

Treat this AS as an alias to the system AS.

Choices:

  • false

  • true

as_num

string / required

Autonomous system number in plain number or (asdot notation) format.

loops

integer

Maximum number of times this AS can be in an AS path.

no_prepend_global_as

boolean

Maximum number of times this AS can be in an AS path.

Choices:

  • false

  • true

private

boolean

Hide this local AS in paths learned from this peering.

Choices:

  • false

  • true

local_interface

string

Specify Local interface for IPv6 link local EBGP peering.

local_preference

string

Specify value of LOCAL_PREF path attribute.

log_updown

boolean

Enable log a message for peer state transitions.

Choices:

  • false

  • true

metric_out

dictionary

Specify route metric sent in MED.

igp

dictionary

Track the IGP metric.

delay_med_update

boolean

Delay updating MED when IGP metric increases.

Choices:

  • false

  • true

metric_offset

integer

Specify metric offset for MED.

set

boolean

Set track the IGP metric.

Choices:

  • false

  • true

metric_value

integer

Specify metric value.

minimum_igp

dictionary

Track the minimum IGP metric.

metric_offset

integer

Specify metric offset for MED.

set

boolean

Set track the minimum IGP metric.

Choices:

  • false

  • true

mtu_discovery

boolean

Enable TCP path MTU discovery.

Choices:

  • false

  • true

multihop

dictionary

Configure an EBGP multihop session.

no_nexthop_change

boolean

Do not change next hop to self in advertisements.

Choices:

  • false

  • true

set

boolean

Set an EBGP multihop session.

Choices:

  • false

  • true

ttl

integer

TTL value for the session.

multipath

dictionary

Allow load sharing among multiple BGP paths.

disable

boolean

Disable Multipath.

Choices:

  • false

  • true

multiple_as

boolean

Use paths received from different ASs.

Choices:

  • false

  • true

multiple_as_disable

boolean

Disable multipath.

Choices:

  • false

  • true

set

boolean

Set allow load sharing among multiple BGP paths.

Choices:

  • false

  • true

neighbor_address

string

Specify neighbor address.

no_advertise_peer_as

boolean

Allows to not advertise routes received from the same autonomous system.

Choices:

  • false

  • true

no_aggregator_id

boolean

Set router ID in aggregator path attribute to 0.

Choices:

  • false

  • true

no_client_reflect

boolean

Disable intracluster route redistribution.

Choices:

  • false

  • true

out_delay

integer

Specify how long before exporting routes from routing table.

outbound_route_filter

dictionary

Dynamically negotiated cooperative route filtering.

bgp_orf_cisco_mode

boolean

Using BGP ORF capability code 130 and Prefix ORF type 128.

Choices:

  • false

  • true

prefix_based

dictionary

Prefix-based outbound route filtering.

accept

dictionary

Honor Prefix-based ORFs from remote peers.

inet

boolean

Honor IPv4 prefix filters.

Choices:

  • false

  • true

inet6

boolean

Honor IPv6 prefix filters.

Choices:

  • false

  • true

set

boolean

Set honor Prefix-based ORFs from remote peers.

Choices:

  • false

  • true

set

boolean

Set prefix-based outbound route filtering.

Choices:

  • false

  • true

passive

boolean

Specify to not send open messages to a peer.

Choices:

  • false

  • true

peer_as

string

Specify Autonomous system number in plain number or ‘higher 16bits’.’Lower 16 bits’ format.

preference

string

Specify preference value.

remove_private

dictionary

Remove well-known private AS numbers.

all

boolean

Remove all private AS numbers and do not stop at the first public AS number.

Choices:

  • false

  • true

all_replace

boolean

Specify private AS replacement.

Choices:

  • false

  • true

all_replace_nearest

boolean

Use closest public AS number to replace a private AS number.

Choices:

  • false

  • true

no_peer_loop_check

boolean

Remove peer loop-check.

Choices:

  • false

  • true

set

boolean

Remove well-known private AS numbers.

Choices:

  • false

  • true

rfc6514_compliant_safi129

boolean

Specify Compliance with RFC6514 SAFI129 format.

Choices:

  • false

  • true

route_server_client

boolean

Enable route server client behavior.

Choices:

  • false

  • true

tcp_aggressive_transmission

boolean

Enable aggressive transmission of pure TCP ACKs and retransmissions.

Choices:

  • false

  • true

tcp_mss

integer

Specify maximum TCP segment size.

traceoptions

dictionary

Configure trace options for BGP.

file

dictionary

Specify trace file options.

filename

string / required

Specify name of file in which to write trace information.

files

integer

Specify maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Specify maximum trace file size.

world_readable

boolean

Allow any user to read the log file.

Choices:

  • false

  • true

flag

list / elements=dictionary

Specify tracing parameters.

detail

boolean

Trace detailed information.

Choices:

  • false

  • true

disable

boolean

Disable this trace flag.

Choices:

  • false

  • true

filter

dictionary

Filter to apply to this flag.

match_on_prefix

boolean

Specify filter based on prefix.

Choices:

  • false

  • true

policy

string

Specify filter policy.

set

boolean

Set filter to apply to this flag.

Choices:

  • false

  • true

name

string / required

specify event name

Choices:

  • "4byte-as"

  • "add-path"

  • "all"

  • "bfd"

  • "damping"

  • "egress-te"

  • "general"

  • "graceful-restart"

  • "keepalive"

  • "normal"

  • "nsr-synchronization"

  • "open"

  • "packets"

  • "policy"

  • "refresh"

  • "route"

  • "state"

  • "task"

  • "thread-io"

  • "thread-update-io"

  • "timer"

  • "update"

receive

boolean

Trace received packets.

Choices:

  • false

  • true

send

boolean

Trace transmitted packets.

Choices:

  • false

  • true

ttl

integer

Specify TTL value for the single-hop peer.

unconfigured_peer_graceful_restart

boolean

Specify BGP unconfigured peer graceful restart options.

Choices:

  • false

  • true

vpn_apply_export

boolean

Apply BGP export policy when exporting VPN routes.

Choices:

  • false

  • true

no_advertise_peer_as

boolean

Allows to not advertise routes received from the same autonomous system.

Choices:

  • false

  • true

no_aggregator_id

boolean

Set router ID in aggregator path attribute to 0.

Choices:

  • false

  • true

no_client_reflect

boolean

Disable intracluster route redistribution.

Choices:

  • false

  • true

optimal_route_reflection

dictionary

Enable optimal route reflection for this client group.

igp_backup

string

Backup node identifier for this client group.

igp_primary

string

Primary node identifier for this client group.

out_delay

integer

Specify how long before exporting routes from routing table.

outbound_route_filter

dictionary

Dynamically negotiated cooperative route filtering.

bgp_orf_cisco_mode

boolean

Using BGP ORF capability code 130 and Prefix ORF type 128.

Choices:

  • false

  • true

prefix_based

dictionary

Prefix-based outbound route filtering.

accept

dictionary

Honor Prefix-based ORFs from remote peers.

inet

boolean

Honor IPv4 prefix filters.

Choices:

  • false

  • true

inet6

boolean

Honor IPv6 prefix filters.

Choices:

  • false

  • true

set

boolean

Set honor Prefix-based ORFs from remote peers.

Choices:

  • false

  • true

set

boolean

Set prefix-based outbound route filtering.

Choices:

  • false

  • true

passive

boolean

Specify to not send open messages to a peer.

Choices:

  • false

  • true

peer_as

string

Specify Autonomous system number in plain number or ‘higher 16bits’.’Lower 16 bits’ format.

preference

string

Specify preference value.

remove_private

dictionary

Remove well-known private AS numbers.

all

boolean

Remove all private AS numbers and do not stop at the first public AS number.

Choices:

  • false

  • true

all_replace

boolean

Specify private AS replacement.

Choices:

  • false

  • true

all_replace_nearest

boolean

Use closest public AS number to replace a private AS number.

Choices:

  • false

  • true

no_peer_loop_check

boolean

Remove peer loop-check.

Choices:

  • false

  • true

set

boolean

Remove well-known private AS numbers.

Choices:

  • false

  • true

rfc6514_compliant_safi129

boolean

Specify Compliance with RFC6514 SAFI129 format.

Choices:

  • false

  • true

route_server_client

boolean

Enable route server client behavior.

Choices:

  • false

  • true

tcp_aggressive_transmission

boolean

Enable aggressive transmission of pure TCP ACKs and retransmissions.

Choices:

  • false

  • true

tcp_mss

integer

Specify maximum TCP segment size.

traceoptions

dictionary

Configure trace options for BGP.

file

dictionary

Specify trace file options.

filename

string / required

Specify name of file in which to write trace information.

files

integer

Specify maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Specify maximum trace file size.

world_readable

boolean

Allow any user to read the log file.

Choices:

  • false

  • true

flag

list / elements=dictionary

Specify tracing parameters.

detail

boolean

Trace detailed information.

Choices:

  • false

  • true

disable

boolean

Disable this trace flag.

Choices:

  • false

  • true

filter

dictionary

Filter to apply to this flag.

match_on_prefix

boolean

Specify filter based on prefix.

Choices:

  • false

  • true

policy

string

Specify filter policy.

set

boolean

Set filter to apply to this flag.

Choices:

  • false

  • true

name

string / required

specify event name

Choices:

  • "4byte-as"

  • "add-path"

  • "all"

  • "bfd"

  • "damping"

  • "egress-te"

  • "general"

  • "graceful-restart"

  • "keepalive"

  • "normal"

  • "nsr-synchronization"

  • "open"

  • "packets"

  • "policy"

  • "refresh"

  • "route"

  • "state"

  • "task"

  • "thread-io"

  • "thread-update-io"

  • "timer"

  • "update"

receive

boolean

Trace received packets.

Choices:

  • false

  • true

send

boolean

Trace transmitted packets.

Choices:

  • false

  • true

ttl

integer

Specify TTL value for the single-hop peer.

type

string

Specify BGP group type.

Choices:

  • "external"

  • "internal"

unconfigured_peer_graceful_restart

boolean

Specify BGP unconfigured peer graceful restart options.

Choices:

  • false

  • true

vpn_apply_export

boolean

Apply BGP export policy when exporting VPN routes.

Choices:

  • false

  • true

hold_time

integer

Specify hold time used when negotiating with a peer.

holddown_all_stale_labels

boolean

Hold all BGP stale-labels, facilating make-before-break for new label advertisements.

Choices:

  • false

  • true

idle_after_switch_over

dictionary

Stop peer session from coming up after nonstop-routing switch-over.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

timeout

integer

Specify timeout value, in seconds, for starting peer after switch over.

import

list / elements=string

Specify import policy.

include_mp_next_hop

boolean

Include NEXT-HOP attribute in multiprotocol updates.

Choices:

  • false

  • true

ipsec_sa

string

Specify IPSec SA name.

keep

string

Specify how to retain routes in the routing table.

Choices:

  • "all"

  • "none"

local_address

string

Specify Address of local end of BGP session.

local_as

dictionary

Local autonomous system number.

alias

boolean

Treat this AS as an alias to the system AS.

Choices:

  • false

  • true

as_num

string / required

Autonomous system number in plain number or (asdot notation) format.

loops

integer

Maximum number of times this AS can be in an AS path.

no_prepend_global_as

boolean

Maximum number of times this AS can be in an AS path.

Choices:

  • false

  • true

private

boolean

Hide this local AS in paths learned from this peering.

Choices:

  • false

  • true

local_interface

string

Specify Local interface for IPv6 link local EBGP peering.

local_preference

string

Specify value of LOCAL_PREF path attribute.

log_updown

boolean

Enable log a message for peer state transitions.

Choices:

  • false

  • true

loops

integer

Specify maximum number of times this AS can be in an AS path.

metric_out

dictionary

Specify route metric sent in MED.

igp

dictionary

Track the IGP metric.

delay_med_update

boolean

Delay updating MED when IGP metric increases.

Choices:

  • false

  • true

metric_offset

integer

Specify metric offset for MED.

set

boolean

Set track the IGP metric.

Choices:

  • false

  • true

metric_value

integer

Specify metric value.

minimum_igp

dictionary

Track the minimum IGP metric.

metric_offset

integer

Specify metric offset for MED.

set

boolean

Set track the minimum IGP metric.

Choices:

  • false

  • true

mtu_discovery

boolean

Enable TCP path MTU discovery.

Choices:

  • false

  • true

multihop

dictionary

Configure an EBGP multihop session.

no_nexthop_change

boolean

Do not change next hop to self in advertisements.

Choices:

  • false

  • true

set

boolean

Set an EBGP multihop session.

Choices:

  • false

  • true

ttl

integer

TTL value for the session.

multipath

dictionary

Allow load sharing among multiple BGP paths.

disable

boolean

Disable Multipath.

Choices:

  • false

  • true

multiple_as

boolean

Use paths received from different ASs.

Choices:

  • false

  • true

multiple_as_disable

boolean

Disable multipath.

Choices:

  • false

  • true

set

boolean

Set allow load sharing among multiple BGP paths.

Choices:

  • false

  • true

multipath_build_priority

string

Configure the multipath build priority.

Choices:

  • "low"

  • "medium"

no_advertise_peer_as

boolean

Allows to not advertise routes received from the same autonomous system.

Choices:

  • false

  • true

no_aggregator_id

boolean

Set router ID in aggregator path attribute to 0.

Choices:

  • false

  • true

no_client_reflect

boolean

Disable intracluster route redistribution.

Choices:

  • false

  • true

no_precision_timers

boolean

Specify not to use precision timers for scheduling keepalives.

Choices:

  • false

  • true

out_delay

integer

Specify how long before exporting routes from routing table.

outbound_route_filter

dictionary

Dynamically negotiated cooperative route filtering.

bgp_orf_cisco_mode

boolean

Using BGP ORF capability code 130 and Prefix ORF type 128.

Choices:

  • false

  • true

prefix_based

dictionary

Prefix-based outbound route filtering.

accept

dictionary

Honor Prefix-based ORFs from remote peers.

inet

boolean

Honor IPv4 prefix filters.

Choices:

  • false

  • true

inet6

boolean

Honor IPv6 prefix filters.

Choices:

  • false

  • true

set

boolean

Set honor Prefix-based ORFs from remote peers.

Choices:

  • false

  • true

set

boolean

Set prefix-based outbound route filtering.

Choices:

  • false

  • true

output_queue_priority

dictionary

BGP output queue priority scheduler for updates.

defaults

dictionary

Map policy’s priority class and BGP output-queue.

high

dictionary

Assign the ‘high’ priority class to this output-queue.

expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

priority

integer

Specify output queue priorit.

low

dictionary

Assign the ‘low’ priority class to this output-queue.

expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

priority

integer

Specify output queue priorit.

medium

dictionary

Assign the ‘medium’ priority class to this output-queue.

expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

priority

integer

Specify output queue priorit.

expedited_update_tokens

integer

Expedited queue; highest priority for number of tokens.

priority_update_tokens

list / elements=dictionary

Output queue priority; higher is better.

priority

integer / required

Specify the priority.

update_tokens

integer / required

Specify update_tokens.

passive

boolean

Specify to not send open messages to a peer.

Choices:

  • false

  • true

path_selection

dictionary

Configure path selection strategy.

always_compare_med

boolean

Compare MED on paths from different AS.

Choices:

  • false

  • true

as_path_ignore

boolean

Ignore AS path comparison during path selection.

Choices:

  • false

  • true

cisco_non_deterministic

boolean

Use Cisco IOS nondeterministic path selection algorithm.

Choices:

  • false

  • true

external_router_id

boolean

Compare router ID on BGP externals.

Choices:

  • false

  • true

l2vpn_use_bgp_rules

boolean

Use standard BGP rules during L2VPN path selection.

Choices:

  • false

  • true

med_plus_igp

dictionary

Add IGP cost to next-hop to MED before comparing MED values.

igp_multiplier

integer

Specify multiplier for IGP cost to next-hop.

med_multiplier

integer

Specify Multiplier for MED.

set

boolean

Set med-plus-igp attribute.

Choices:

  • false

  • true

peer_as

string

Specify Autonomous system number in plain number or ‘higher 16bits’.’Lower 16 bits’ format.

precision_timers

boolean

Use precision timers for scheduling keepalives.

Choices:

  • false

  • true

preference

string

Specify preference value.

remove_private

dictionary

Remove well-known private AS numbers.

all

boolean

Remove all private AS numbers and do not stop at the first public AS number.

Choices:

  • false

  • true

all_replace

boolean

Specify private AS replacement.

Choices:

  • false

  • true

all_replace_nearest

boolean

Use closest public AS number to replace a private AS number.

Choices:

  • false

  • true

no_peer_loop_check

boolean

Remove peer loop-check.

Choices:

  • false

  • true

set

boolean

Remove well-known private AS numbers.

Choices:

  • false

  • true

rfc6514_compliant_safi129

boolean

Specify Compliance with RFC6514 SAFI129 format.

Choices:

  • false

  • true

route_server_client

boolean

Enable route server client behavior.

Choices:

  • false

  • true

send_addpath_optimization

boolean

Enable BGP addpath advertisement optimization.

Choices:

  • false

  • true

snmp_options

dictionary

Customize SNMP behaviors specifically for BGP MIBs.

backward_traps_only_from_established

boolean

Limit traps for backward transitions to only those moving from Established state.

Choices:

  • false

  • true

emit_inet_address_length_in_oid

boolean

Emit Length in OID for InetAddress MIB type.

Choices:

  • false

  • true

sr_preference_override

string

Replace received segment routing traffic engineering preference value with override value.

stale_labels_holddown_period

integer

Specify duration (sec) MPLS labels allocated by BGP are kept after they go stale.

tcp_aggressive_transmission

boolean

Enable aggressive transmission of pure TCP ACKs and retransmissions.

Choices:

  • false

  • true

tcp_mss

integer

Specify maximum TCP segment size.

traceoptions

dictionary

Configure trace options for BGP.

file

dictionary

Specify trace file options.

filename

string / required

Specify name of file in which to write trace information.

files

integer

Specify maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Specify maximum trace file size.

world_readable

boolean

Allow any user to read the log file.

Choices:

  • false

  • true

flag

list / elements=dictionary

Specify tracing parameters.

detail

boolean

Trace detailed information.

Choices:

  • false

  • true

disable

boolean

Disable this trace flag.

Choices:

  • false

  • true

filter

dictionary

Filter to apply to this flag.

match_on_prefix

boolean

Specify filter based on prefix.

Choices:

  • false

  • true

policy

string

Specify filter policy.

set

boolean

Set filter to apply to this flag.

Choices:

  • false

  • true

name

string / required

specify event name

Choices:

  • "4byte-as"

  • "add-path"

  • "all"

  • "bfd"

  • "damping"

  • "egress-te"

  • "general"

  • "graceful-restart"

  • "keepalive"

  • "normal"

  • "nsr-synchronization"

  • "open"

  • "packets"

  • "policy"

  • "refresh"

  • "route"

  • "state"

  • "task"

  • "thread-io"

  • "thread-update-io"

  • "timer"

  • "update"

receive

boolean

Trace received packets.

Choices:

  • false

  • true

send

boolean

Trace transmitted packets.

Choices:

  • false

  • true

traffic_statistics_labeled_path

dictionary

Collect periodic ingress labeled statistics for BGP label-switched paths.

file

dictionary

Specify statistics file options.

filename

string

Specify name of file in which to write trace information.

files

integer

Specify maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Specify maximum trace file size.

world_readable

boolean

Allow any user to read the log file.

Choices:

  • false

  • true

interval

integer

Specify time interval to collect statistics.

ttl

integer

Specify TTL value for the single-hop peer.

unconfigured_peer_graceful_restart

boolean

Specify BGP unconfigured peer graceful restart options.

Choices:

  • false

  • true

vpn_apply_export

boolean

Apply BGP export policy when exporting VPN routes.

Choices:

  • false

  • true

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the Junos device by executing the command show protocols bgp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result

state

string

The state the configuration should be left in.

State purged removes all (routing-options autonomous-system, bgp global, bgp groups, bgp neighbors, bgp family and bgp group and neighbor family) the BGP configurations from the target device. Use caution with this state.

State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context.

Running states deleted and replaced will result in an error if there are address-family configuration lines present under a neighbor.Please use the junipernetworks.junos.junos_bgp_address_family modules for prior cleanup.

Refer to examples for more details.

Choices:

  • "purged"

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed.

  • This module works with connection netconf. See the Junos OS Platform Options.

  • Tested against JunOS v18.4R1

Examples

# Using merged
#
# Before state:
# -------------
#
# vsrx# show bgp summary
# BGP is not running

# vsrx# show routing-options autonomous-system

- name: Merge provided bgp config with device configuration
  junipernetworks.junos.junos_bgp_global:
    config:
      as_number: "65534"
      loops: 3
      asdot_notation: true
      accept_remote_nexthop: true
      add_path_display_ipv4_address: true
      advertise_from_main_vpn_tables: true
      advertise_inactive: true
      authentication_algorithm: "md5"
      bgp_error_tolerance:
        malformed_route_limit: 20000000
      bmp:
        monitor: true
      damping: true
      description: "This is configured with Junos_bgp resource module"
      egress_te_sid_stats: true
      hold_time: 5
      holddown_all_stale_labels: true
      include_mp_next_hop: true
      log_updown: true
      no_advertise_peer_as: true
      no_aggregator_id: true
      no_client_reflect: true
      out_delay: 10
      precision_timers: true
      preference: 2
    state: merged

# Task Output:
# ------------
# before: {}
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp><nc:accept-remote-nexthop/>
#   <nc:add-path-display-ipv4-address/><nc:advertise-from-main-vpn-tables/><nc:advertise->
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:autonomous-system>65534<nc:loops>3</nc:loops><nc:asdot-notation/></nc:autonomous-system></nc:routing-options>
#
# after:
#   accept_remote_nexthop: true
#   add_path_display_ipv4_address: true
#   advertise_from_main_vpn_tables: true
#   advertise_inactive: true
#   as_number: '65534'
#   asdot_notation: true
#   authentication_algorithm: md5
#   bgp_error_tolerance:
#     malformed_route_limit: 20000000
#   bmp:
#     monitor: true
#   damping: true
#   description: This is configured with Junos_bgp resource module
#   egress_te_sid_stats: true
#   hold_time: 5
#   holddown_all_stale_labels: true
#   include_mp_next_hop: true
#   log_updown: true
#   loops: 3
#   no_advertise_peer_as: true
#   no_aggregator_id: true
#   no_client_reflect: true
#   out_delay: 10
#   precision_timers: true
#   preference: '2'

# After state:
# ------------
#
# vsrx# show routing-options autonomous-system
# 65534 loops 3 asdot-notation;

# vsrx# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

# Using replaced
#
# Before state:
# -------------
#
# vsrx# show routing-options autonomous-system
# [edit]
# vsrx# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Replace running config with provided config
  junipernetworks.junos.junos_bgp_global:
    config:
      advertise_inactive: true
      authentication_algorithm: "md5"
      bfd_liveness_detection:
        minimum_receive_interval: 8
        multiplier: 30
        no_adaptation: true
        transmit_interval:
          minimum_interval: 4
        version: "automatic"
      bgp_error_tolerance:
        malformed_route_limit: 40000000
      description: "Replace running bgp config"
      egress_te_sid_stats: true
      hold_time: 5
      out_delay: 10
      preference: "2"
    state: replaced

# Task Output:
# ------------
#
# before:
#   accept_remote_nexthop: true
#   add_path_display_ipv4_address: true
#   advertise_from_main_vpn_tables: true
#   advertise_inactive: true
#   as_number: '65534'
#   asdot_notation: true
#   authentication_algorithm: md5
#   bgp_error_tolerance:
#     malformed_route_limit: 20000000
#   bmp:
#     monitor: true
#   damping: true
#   description: This is configured with Junos_bgp resource module
#   egress_te_sid_stats: true
#   hold_time: 5
#   holddown_all_stale_labels: true
#   include_mp_next_hop: true
#   log_updown: true
#   loops: 3
#   no_advertise_peer_as: true
#   no_aggregator_id: true
#   no_client_reflect: true
#   out_delay: 10
#   precision_timers: true
#   preference: '2'

# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp>
#   <nc:accept-remote-nexthop delete="delete"/><nc:add-path-display-ipv4-address delete="delete"/><nc:advertise-bgp-t
#   delete="delete"/><nc:include-mp-next-hop delete="delete"/><nc:ipsec-sa delete="delete"/><nc:keep delete="delete"/>
#   <nc:local-address delete="delete"/><nc:local-interface delete="delete"/t
#   delete="delete"/></nc:bgp><nc:bgp><nc:advertise-inactive/><nc:egress-te-sid-stats/>
#   <nc:authentication-algorithm>md5</nc:authentication-algorithm><nc:description>Replace running bgp conf>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:autonomous-system delete="delete"/></nc:routing-options>

#
# after:
#   advertise_inactive: true
#   authentication_algorithm: md5
#   bfd_liveness_detection:
#     minimum_receive_interval: 8
#     multiplier: 30
#     no_adaptation: true
#     transmit_interval:
#       minimum_interval: 4
#     version: automatic
#   bgp_error_tolerance:
#     malformed_route_limit: 40000000
#   description: Replace running bgp config
#   egress_te_sid_stats: true
#   hold_time: 5
#   out_delay: 10
#   preference: '2'

# After state:
# ------------
#
# varx# show protocols bgp
# description "Replace running bgp config";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

# vsrx# show routing-options autonomous-system

# Using overridden
# "(NOTE: This will work same as replaced operation)"
#
# Before state:
# -------------
#
# vsrx# show routing-options autonomous-system
# [edit]
# vsrx# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Override running config with provided config
  junipernetworks.junos.junos_bgp_global:
    config:
      advertise_inactive: true
      authentication_algorithm: "md5"
      bfd_liveness_detection:
        minimum_receive_interval: 8
        multiplier: 30
        no_adaptation: true
        transmit_interval:
          minimum_interval: 4
        version: "automatic"
      bgp_error_tolerance:
        malformed_route_limit: 40000000
      description: "Replace running bgp config"
      egress_te_sid_stats: true
      hold_time: 5
      out_delay: 10
      preference: "2"
    state: overridden

# Task Output:
# ------------
#
# before:
#   accept_remote_nexthop: true
#   add_path_display_ipv4_address: true
#   advertise_from_main_vpn_tables: true
#   advertise_inactive: true
#   as_number: '65534'
#   asdot_notation: true
#   authentication_algorithm: md5
#   bgp_error_tolerance:
#     malformed_route_limit: 20000000
#   bmp:
#     monitor: true
#   damping: true
#   description: This is configured with Junos_bgp resource module
#   egress_te_sid_stats: true
#   hold_time: 5
#   holddown_all_stale_labels: true
#   include_mp_next_hop: true
#   log_updown: true
#   loops: 3
#   no_advertise_peer_as: true
#   no_aggregator_id: true
#   no_client_reflect: true
#   out_delay: 10
#   precision_timers: true
#   preference: '2'

# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp>
#   <nc:accept-remote-nexthop delete="delete"/><nc:add-path-display-ipv4-address delete="delete"/><nc:advertise-bgp-t
#   delete="delete"/><nc:include-mp-next-hop delete="delete"/><nc:ipsec-sa delete="delete"/><nc:keep delete="delete"/>
#   <nc:local-address delete="delete"/><nc:local-interface delete="delete"/t
#   delete="delete"/></nc:bgp><nc:bgp><nc:advertise-inactive/><nc:egress-te-sid-stats/>
#   <nc:authentication-algorithm>md5</nc:authentication-algorithm><nc:description>Replace running bgp conf>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:autonomous-system delete="delete"/></nc:routing-options>

#
# after:
#   advertise_inactive: true
#   authentication_algorithm: md5
#   bfd_liveness_detection:
#     minimum_receive_interval: 8
#     multiplier: 30
#     no_adaptation: true
#     transmit_interval:
#       minimum_interval: 4
#     version: automatic
#   bgp_error_tolerance:
#     malformed_route_limit: 40000000
#   description: Replace running bgp config
#   egress_te_sid_stats: true
#   hold_time: 5
#   out_delay: 10
#   preference: '2'

# After state:
# ------------
#
# varx# show protocols bgp
# description "Replace running bgp config";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

# vsrx# show routing-options autonomous-system

# Using deleted
# "(NOTE: This WILL delete the bgp global attributes)"
# Before state
# ------------
#
# vsrx# show protocols bgp
# description "Replace running bgp config";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

- name: Delete bgp section of running config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: deleted

# Task Output:
# ------------

# before:
#   advertise_inactive: true
#   authentication_algorithm: md5
#   bfd_liveness_detection:
#     minimum_receive_interval: 8
#     multiplier: 30
#     no_adaptation: true
#     transmit_interval:
#       minimum_interval: 4
#     version: automatic
#   bgp_error_tolerance:
#     malformed_route_limit: 40000000
#   description: Replace running bgp config
#   egress_te_sid_stats: true
#   hold_time: 5
#   out_delay: 10
#   preference: '2'

# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp><nc:accept-remote-nexthop delete="delete"/>
#   <nc:add-path-display-ipv4-address delete="delete"/><nc:advertise-bgp-t
#   delete="delete"/><nc:include-mp-next-hop delete="delete"/><nc:ipsec-sa delete="delete"/><nc:keep delete="delete"/>
#   <nc:local-address delete="delete"/><nc:local-interface delete="delete"/t
#   delete="delete"/></nc:bgp></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>

# after: {}

# After state:
# ------------
# vsrx# show protocols bgp

# vsrx# show routing-options autonomous-system

# Using gathered
#
# Before state:
# -------------
#
# vsrx# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Gather BGP facts from running config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: gathered

# Task Output:
# ------------

# gathered:
#   accept_remote_nexthop: true
#   add_path_display_ipv4_address: true
#   advertise_from_main_vpn_tables: true
#   advertise_inactive: true
#   as_number: '65534'
#   asdot_notation: true
#   authentication_algorithm: md5
#   bgp_error_tolerance:
#     malformed_route_limit: 20000000
#   bmp:
#     monitor: true
#   damping: true
#   description: This is configured with Junos_bgp resource module
#   egress_te_sid_stats: true
#   hold_time: 5
#   holddown_all_stale_labels: true
#   include_mp_next_hop: true
#   log_updown: true
#   loops: 3
#   no_advertise_peer_as: true
#   no_aggregator_id: true
#   no_client_reflect: true
#   out_delay: 10
#   precision_timers: true
#   preference: '2'

# Using purged
# "(NOTE: This WILL delete the configured global BGP, and BGP address family config)"

# Before state:
# -------------
#
# vsrx# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Purge BGP config from running config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: purged

# Task Output:
# ------------

# before:
#   accept_remote_nexthop: true
#   add_path_display_ipv4_address: true
#   advertise_from_main_vpn_tables: true
#   advertise_inactive: true
#   as_number: '65534'
#   asdot_notation: true
#   authentication_algorithm: md5
#   bgp_error_tolerance:
#     malformed_route_limit: 20000000
#   bmp:
#     monitor: true
#   damping: true
#   description: This is configured with Junos_bgp resource module
#   egress_te_sid_stats: true
#   hold_time: 5
#   holddown_all_stale_labels: true
#   include_mp_next_hop: true
#   log_updown: true
#   loops: 3
#   no_advertise_peer_as: true
#   no_aggregator_id: true
#   no_client_reflect: true
#   out_delay: 10
#   precision_timers: true
#   preference: '2'

# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp delete="delete"/></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:autonomous-system delete="delete"/></nc:routing-options>

# after: {}

# After state:
# ------------
# vsrx# show protocols bgp

# vsrx# show routing-options autonomous-system

# Using rendered

- name: Render the commands for provided configuration
  junipernetworks.junos.junos_bgp_global:
    config:
      as_number: "65534"
      loops: 3
      asdot_notation: true
      accept_remote_nexthop: true
      add_path_display_ipv4_address: true
      advertise_from_main_vpn_tables: true
      advertise_inactive: true
      authentication_algorithm: "md5"
      bgp_error_tolerance:
        malformed_route_limit: 20000000
      bmp:
        monitor: true
      damping: true
      description: "This is configured with Junos_bgp resource module"
      egress_te_sid_stats: true
      hold_time: 5
      holddown_all_stale_labels: true
      include_mp_next_hop: true
      log_updown: true
      no_advertise_peer_as: true
      no_aggregator_id: true
      no_client_reflect: true
      out_delay: 10
      precision_timers: true
      preference: 2
    state: rendered

# Task Output:
# ------------

# rendered:
# <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:bgp><nc:accept-remote-nexthop/><nc:add-path-display-ipv4-address/>
# <nc:advertise-from-main-vpn-tables/><nc:ad>

#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#    <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#       <version>18.4R1-S2.4</version>
#       <protocols>
#          <bgp>
#             <precision-timers />
#             <advertise-from-main-vpn-tables />
#             <holddown-all-stale-labels />
#             <description>This is configured with Junos_bgp resource module</description>
#             <accept-remote-nexthop />
#             <preference>2</preference>
#             <hold-time>5</hold-time>
#             <advertise-inactive />
#             <no-advertise-peer-as />
#             <no-aggregator-id />
#             <out-delay>10</out-delay>
#             <log-updown />
#             <damping />
#             <bgp-error-tolerance>
#                <malformed-route-limit>20000000</malformed-route-limit>
#             </bgp-error-tolerance>
#             <authentication-algorithm>md5</authentication-algorithm>
#             <remove-private />
#             <no-client-reflect />
#             <include-mp-next-hop />
#             <bmp>
#                <monitor>disable</monitor>
#                <route-monitoring>
#                   <none />
#                </route-monitoring>
#             </bmp>
#             <advertise-bgp-static>
#                <policy>static-to-bgp</policy>
#             </advertise-bgp-static>
#             <add-path-display-ipv4-address />
#             <bfd-liveness-detection>
#                <version>automatic</version>
#                <minimum-receive-interval>4</minimum-receive-interval>
#                <multiplier>10</multiplier>
#                <no-adaptation />
#                <transmit-interval>
#                   <minimum-interval>2</minimum-interval>
#                </transmit-interval>
#                <detection-time>
#                   <threshold>300000</threshold>
#                </detection-time>
#             </bfd-liveness-detection>
#             <egress-te-sid-stats />
#             <group>
#                <name>internal</name>
#                <out-delay>8</out-delay>
#             </group>
#             <group>
#                <name>external</name>
#                <out-delay>9</out-delay>
#             </group>
#             <group>
#                <name>inboun</name>
#                <type>internal</type>
#             </group>
#             <group>
#                <name>ibgp</name>
#                <type>internal</type>
#                <local-address>10.2.2.2</local-address>
#                <export>static-to-bgp</export>
#                <neighbor>
#                   <name>10.1.1.1</name>
#                </neighbor>
#             </group>
#          </bgp>
#          <ospf3>
#             <area>
#                <name>0.0.0.100</name>
#                <stub>
#                   <default-metric>200</default-metric>
#                </stub>
#                <interface>
#                   <name>so-0/0/0.0</name>
#                   <metric>5</metric>
#                   <priority>3</priority>
#                </interface>
#             </area>
#          </ospf3>
#       </protocols>
#       <routing-options>
#          <static>
#             <route>
#                <name>172.16.17.0/24</name>
#                <discard />
#             </route>
#          </static>
#          <router-id>10.200.16.75</router-id>
#          <autonomous-system>
#             <as-number>65432</as-number>
#          </autonomous-system>
#       </routing-options>
#    </configuration>
# </rpc-reply>


- name: Parsed the device configuration to get ansible facts
  junipernetworks.junos.junos_bgp_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------

# parsed:
#   accept_remote_nexthop: true
#   add_path_display_ipv4_address: true
#   advertise_bgp_static:
#     policy: static-to-bgp
#   advertise_from_main_vpn_tables: true
#   advertise_inactive: true
#   as_number: '65432'
#   authentication_algorithm: md5
#   bfd_liveness_detection:
#     detection_time:
#       threshold: 300000
#     minimum_receive_interval: 4
#     multiplier: 10
#     no_adaptation: true
#     transmit_interval:
#       minimum_interval: 2
#     version: automatic
#   bgp_error_tolerance:
#     malformed_route_limit: 20000000
#   bmp:
#     monitor: false
#     route_monitoring:
#       none: true
#   damping: true
#   description: This is configured with Junos_bgp resource module
#   egress_te_sid_stats: true
#   groups:
#   - name: internal
#     out_delay: 8
#   - name: external
#     out_delay: 9
#   - name: inboun
#     type: internal
#   - export: static-to-bgp
#     local_address: 10.2.2.2
#     name: ibgp
#     neighbors:
#     - neighbor_address: 10.1.1.1
#     type: internal
#   hold_time: 5
#   holddown_all_stale_labels: true
#   include_mp_next_hop: true
#   log_updown: true
#   no_advertise_peer_as: true
#   no_aggregator_id: true
#   no_client_reflect: true
#   out_delay: 10
#   precision_timers: true
#   preference: '2'
#   remove_private:
#     set: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [" <nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"> <nc:bgp> <nc:damping/> <nc:egress-te-sid-stats/> <nc:authentication-algorithm>md5</nc:authentication-algorithm> <nc:description>This is configured with Junos_bgp resource module</nc:description> <nc:hold-time>5</nc:hold-time> <nc:bfd-liveness-detection> <nc:transmit-interval> <nc:minimum-interval>2</nc:minimum-interval> </nc:transmit-interval> <nc:minimum-receive-interval>4</nc:minimum-receive-interval> <nc:multiplier>10</nc:multiplier> <nc:no-adaptation/> <nc:version>automatic</nc:version> </nc:bfd-liveness-detection> <nc:bgp-error-tolerance> <nc:malformed-route-limit>20000000</nc:malformed-route-limit> </nc:bgp-error-tolerance> <nc:bmp> <nc:monitor>enable</nc:monitor> </nc:bmp> </nc:bgp> </nc:protocols>", "xml 2", "xml 3"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\">"]

Authors

  • Rohit Thakur (@rohitthakur2590)