junipernetworks.junos.junos_ospfv2 module – OSPFv2 resource module

Note

This module is part of the junipernetworks.junos collection (version 5.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_ospfv2.

New in junipernetworks.junos 1.0.0

Synopsis

  • This module manages OSPFv2 configuration on devices running Juniper JUNOS.

Note

This module has a corresponding action plugin.

Aliases: ospfv2

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

  • xmltodict (>=0.12.0)

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of OSPFv2 process configuration.

areas

list / elements=dictionary

A list of OSPFv2 areas’ configuration.

area_id

string / required

The Area ID as an integer or IP Address.

area_range

string

Configure an address range for the area.

Included for compatibility, remove/deprecate after 2025-07-01.

Alternate for this would be area_ranges which is a list.

area_ranges

list / elements=dictionary

Configure IP address ranges for the area.

address

string

Specify ip address.

exact

boolean

Enforce exact match for advertisement of this area range.

Choices:

  • false

  • true

override_metric

integer

Override the dynamic metric for this area-range.

restrict

boolean

Restrict advertisement of this area range.

Choices:

  • false

  • true

interfaces

list / elements=dictionary

List of interfaces in this area.

authentication

dictionary

Specify authentication type

md5

list / elements=dictionary

MD5 authentication keys

key

string

Specify key value

key_id

integer

Specify the key identity

start_time

string

Specify Start time for key transmission (YYYY-MM-DD.HH:MM)

password

string

Specify authentication key.

type

dictionary

Type of authentication to use.

Included for compatibility, remove/deprecate after 2025-07-01.

bandwidth_based_metrics

list / elements=dictionary

Specify list of bandwidth based metrics

bandwidth

string

BW to apply metric to.

Choices:

  • "1g"

  • "10g"

metric

integer

Specify metric

flood_reduction

boolean

Enable flood reduction.

Choices:

  • false

  • true

metric

integer

Metric applied to the interface.

name

string / required

Name of the interface.

passive

boolean

Specify passive

Choices:

  • false

  • true

priority

integer

Priority for the interface.

timers

dictionary

Specify timers

dead_interval

integer

Dead interval (seconds).

hello_interval

integer

Hello interval (seconds).

poll_interval

integer

Poll interval (seconds).

retransmit_interval

integer

Retransmit interval (seconds).

transit_delay

integer

Transit delay (seconds).

stub

dictionary

Settings for configuring the area as a stub.

default_metric

integer

Metric for the default route in this area.

set

boolean

Configure the area as a stub.

Choices:

  • false

  • true

external_preference

integer

Preference of external routes.

overload

dictionary

Specify time for overload mode reset

allow_route_leaking

boolean

Allow routes to be leaked when overload is configured.

Choices:

  • false

  • true

as_external

boolean

Advertise As External with maximum usable metric.

Choices:

  • false

  • true

stub_network

boolean

Advertise Stub Network with maximum metric.

Choices:

  • false

  • true

timeout

integer

Time after which overload mode is reset (seconds).

preference

integer

Preference of internal routes.

prefix_export_limit

integer

Maximum number of external prefixes that can be exported.

reference_bandwidth

string

Bandwidth for calculating metric defaults.

Choices:

  • "1g"

  • "10g"

rfc1583compatibility

boolean

Set RFC1583 compatibility

Choices:

  • false

  • true

router_id

string

The OSPFv2 router id.

spf_options

dictionary

Configure options for SPF.

delay

integer

Time to wait before running an SPF (seconds).

holddown

integer

Time to hold down before running an SPF (seconds).

no_ignore_our_externals

boolean

Do not ignore self-generated external and NSSA LSAs.

Choices:

  • false

  • true

rapid_runs

integer

Number of maximum rapid SPF runs before holddown (seconds).

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the Junos device by executing the command show protocols ospf.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result

state

string

The state the configuration should be left in.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "rendered"

  • "parsed"

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed.

  • This module works with connection netconf.

  • See the Junos OS Platform Options.

  • Tested against JunOS v18.4R1

Examples

# Using merged
#
# Before state
# ------------
#
# admin# show protocols ospf

- name: Merge provided OSPFv2 configuration into running config.
  junipernetworks.junos.junos_ospfv2:
    config:
      - reference_bandwidth: 10g
        areas:
          - area_id: 0.0.0.100
            area_ranges:
              - address: 10.200.17.0/24
                exact: true
                restrict: true
                override_metric: 2000
              - address: 10.200.15.0/24
                exact: true
                restrict: true
                override_metric: 2000
                stub:
                  default_metric: 100
                  set: true
                interfaces:
                  - name: so-0/0/0.0
                    priority: 3
                    metric: 5
                    flood_reduction: false
                    passive: true
                    bandwidth_based_metrics:
                      - bandwidth: 1g
                        metric: 5
                      - bandwidth: 10g
                        metric: 40
                    timers:
                      dead_interval: 4
                      hello_interval: 2
                      poll_interval: 2
                      retransmit_interval: 2
        rfc1583compatibility: false
    state: merged

# Task Output:
# ------------
#
# before: []
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:ospf><nc:reference-bandwidth>10g</nc:reference-bandwidth><nc:no-rfc-1583/>
#   <nc:area><nc:name>0.0.0.100</nc:name><nc:area-range><nc:name>10.200.17.0/24</nc:name><nc:exact/>
#   <nc:restrict/><nc:override-metric>2000</nc:override-metric></nc:area-range><nc:area-range>
#   <nc:name>10.200.15.0/24</nc:name><nc:exact/><nc:restrict/><nc:override-metric>2000</nc:override-metric>
#   </nc:area-range><nc:interface><nc:name>so-0/0/0.0</nc:name><nc:priority>3</nc:priority>
#   <nc:metric>5</nc:metric><nc:passive/><nc:bandwidth-based-metrics><nc:bandwidth><nc:name>1g</nc:name>
#   <nc:metric>5</nc:metric></nc:bandwidth><nc:bandwidth><nc:name>10g</nc:name><nc:metric>40</nc:metric>
#   </nc:bandwidth></nc:bandwidth-based-metrics><nc:dead-interval>4</nc:dead-interval>
#   <nc:hello-interval>2</nc:hello-interval><nc:poll-interval>2</nc:poll-interval>
#   <nc:retransmit-interval>2</nc:retransmit-interval></nc:interface><nc:stub>
#   <nc:default-metric>100</nc:default-metric></nc:stub></nc:area></nc:ospf></nc:protocols>
#
# after:
# - areas:
#   - area_id: 0.0.0.100
#     area_range: '[''10.200.17.0/24'', ''10.200.15.0/24'']'
#     area_ranges:
#     - address: 10.200.17.0/24
#       exact: true
#       override_metric: 2000
#       restrict: true
#     - address: 10.200.15.0/24
#       exact: true
#       override_metric: 2000
#       restrict: true
#     interfaces:
#     - bandwidth_based_metrics:
#       - bandwidth: 1g
#         metric: 5
#       - bandwidth: 10g
#         metric: 40
#       metric: 5
#       name: so-0/0/0.0
#       passive: true
#       priority: 3
#       timers:
#         dead_interval: 4
#         hello_interval: 2
#         poll_interval: 2
#         retransmit_interval: 2
#     stub:
#       default_metric: 100
#       set: true
#   reference_bandwidth: 10g
#   rfc1583compatibility: false

# After state
# -----------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.100 {
#     stub default-metric 100;
#     area-range 10.200.17.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     area-range 10.200.15.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#         retransmit-interval 2;
#         hello-interval 2;
#         dead-interval 4;
#         poll-interval 2;
#     }
# }
#
# Using replaced
#
# Before state
# ------------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.100 {
#     stub default-metric 100;
#     area-range 10.200.17.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     area-range 10.200.15.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#         retransmit-interval 2;
#         hello-interval 2;
#         dead-interval 4;
#         poll-interval 2;
#     }
# }

- name: Replace existing Junos OSPFv2 config with provided config
  junipernetworks.junos.junos_ospfv2:
    config:
      - reference_bandwidth: 10g
        areas:
          - area_id: 0.0.0.100
            area_ranges:
              - address: 10.200.17.0/24
                exact: true
                restrict: true
              - address: 10.200.16.0/24
                exact: true
                restrict: true
                override_metric: 1000
            stub:
              default_metric: 100
              set: true
            interfaces:
              - name: so-0/0/0.0
                priority: 3
                metric: 5
                flood_reduction: false
                passive: true
                bandwidth_based_metrics:
                  - bandwidth: 1g
                    metric: 5
                  - bandwidth: 10g
                    metric: 40
                timers:
                  dead_interval: 4
                  hello_interval: 2
                  poll_interval: 2
                  retransmit_interval: 2
        rfc1583compatibility: false
    state: replacedd

# Task Output:
# ------------
#
# before:
#   - areas:
#     - area_id: 0.0.0.100
#       area_range: '[''10.200.17.0/24'', ''10.200.15.0/24'']'
#       area_ranges:
#       - address: 10.200.17.0/24
#         exact: true
#         override_metric: 2000
#         restrict: true
#       - address: 10.200.15.0/24
#         exact: true
#         override_metric: 2000
#         restrict: true
#       interfaces:
#       - bandwidth_based_metrics:
#         - bandwidth: 1g
#           metric: 5
#         - bandwidth: 10g
#           metric: 40
#         metric: 5
#         name: so-0/0/0.0
#         passive: true
#         priority: 3
#         timers:
#           dead_interval: 4
#           hello_interval: 2
#           poll_interval: 2
#           retransmit_interval: 2
#       stub:
#         default_metric: 100
#         set: true
#     reference_bandwidth: 10g
#     rfc1583compatibility: false
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:ospf><nc:area delete="delete">0.0.0.100</nc:area></nc:ospf><nc:ospf>
#   <nc:reference-bandwidth>10g</nc:reference-bandwidth><nc:no-rfc-1583/><nc:area>
#   <nc:name>0.0.0.100</nc:name><nc:area-range><nc:name>10.200.17.0/24</nc:name><nc:exact/>
#   <nc:restrict/></nc:area-range><nc:area-range><nc:name>10.200.16.0/24</nc:name><nc:exact/>
#   <nc:restrict/><nc:override-metric>1000</nc:override-metric></nc:area-range><nc:interface>
#   <nc:name>so-0/0/0.0</nc:name><nc:priority>3</nc:priority><nc:metric>5</nc:metric><nc:passive/>
#   <nc:bandwidth-based-metrics><nc:bandwidth><nc:name>1g</nc:name><nc:metric>5</nc:metric>
#   </nc:bandwidth><nc:bandwidth><nc:name>10g</nc:name><nc:metric>40</nc:metric></nc:bandwidth>
#   </nc:bandwidth-based-metrics><nc:dead-interval>4</nc:dead-interval><nc:hello-interval>2</nc:hello-interval>
#   <nc:poll-interval>2</nc:poll-interval><nc:retransmit-interval>2</nc:retransmit-interval></nc:interface>
#   <nc:stub><nc:default-metric>100</nc:default-metric></nc:stub></nc:area></nc:ospf></nc:protocols>
#
# after:
#   - areas:
#     - area_id: 0.0.0.100
#       area_range: '[''10.200.17.0/24'', ''10.200.16.0/24'']'
#       area_ranges:
#       - address: 10.200.17.0/24
#         exact: true
#         restrict: true
#       - address: 10.200.16.0/24
#         exact: true
#         override_metric: 1000
#         restrict: true
#       interfaces:
#       - bandwidth_based_metrics:
#         - bandwidth: 1g
#           metric: 5
#         - bandwidth: 10g
#           metric: 40
#         metric: 5
#         name: so-0/0/0.0
#         passive: true
#         priority: 3
#         timers:
#           dead_interval: 4
#           hello_interval: 2
#           poll_interval: 2
#           retransmit_interval: 2
#       stub:
#         default_metric: 100
#         set: true
#     reference_bandwidth: 10g
#     rfc1583compatibility: false
#
# After state
# -----------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.100 {
#     stub default-metric 100;
#     area-range 10.200.17.0/24 {
#         restrict;
#         exact;
#     }
#     area-range 10.200.16.0/24 {
#         restrict;
#         exact;
#         override-metric 1000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#         retransmit-interval 2;
#         hello-interval 2;
#         dead-interval 4;
#         poll-interval 2;
#     }
# }
#
# Using overridden
#
# Before state
# ------------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.100 {
#     stub default-metric 100;
#     area-range 10.200.17.0/24 {
#         restrict;
#         exact;
#     }
#     area-range 10.200.16.0/24 {
#         restrict;
#         exact;
#         override-metric 1000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#         retransmit-interval 2;
#         hello-interval 2;
#         dead-interval 4;
#         poll-interval 2;
#     }
# }

- name: Override runnig OSPFv2 config with provided config
  junipernetworks.junos.junos_ospfv2:
    config:
      - reference_bandwidth: 10g
        areas:
          - area_id: 0.0.0.110
            area_ranges:
              - address: 20.200.17.0/24
                exact: true
                restrict: true
                override_metric: 2000
              - address: 20.200.15.0/24
                exact: true
                restrict: true
                override_metric: 2000
            stub:
              default_metric: 200
              set: true
            interfaces:
              - name: so-0/0/0.0
                priority: 3
                metric: 5
                flood_reduction: false
                passive: true
                bandwidth_based_metrics:
                  - bandwidth: 1g
                    metric: 5
                  - bandwidth: 10g
                    metric: 40
    state: overridden

# Task Output:
# ------------
#
# before:
# - areas:
#   - area_id: 0.0.0.100
#     area_range: '[''10.200.17.0/24'', ''10.200.16.0/24'']'
#     area_ranges:
#     - address: 10.200.17.0/24
#       exact: true
#       restrict: true
#     - address: 10.200.16.0/24
#       exact: true
#       override_metric: 1000
#       restrict: true
#     interfaces:
#     - bandwidth_based_metrics:
#       - bandwidth: 1g
#         metric: 5
#       - bandwidth: 10g
#         metric: 40
#       metric: 5
#       name: so-0/0/0.0
#       passive: true
#       priority: 3
#       timers:
#         dead_interval: 4
#         hello_interval: 2
#         poll_interval: 2
#         retransmit_interval: 2
#     stub:
#       default_metric: 100
#       set: true
#   reference_bandwidth: 10g
#   rfc1583compatibility: false
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:ospf><nc:area delete="delete">0.0.0.100</nc:area></nc:ospf><nc:ospf>
#   <nc:reference-bandwidth>10g</nc:reference-bandwidth><nc:area><nc:name>0.0.0.110</nc:name>
#   <nc:area-range><nc:name>20.200.17.0/24</nc:name><nc:exact/><nc:restrict/>
#   <nc:override-metric>2000</nc:override-metric></nc:area-range><nc:area-range>
#   <nc:name>20.200.15.0/24</nc:name><nc:exact/><nc:restrict/><nc:override-metric>2000</nc:override-metric>
#   </nc:area-range><nc:interface><nc:name>so-0/0/0.0</nc:name><nc:priority>3</nc:priority>
#   <nc:metric>5</nc:metric><nc:passive/><nc:bandwidth-based-metrics><nc:bandwidth><nc:name>1g</nc:name>
#   <nc:metric>5</nc:metric></nc:bandwidth><nc:bandwidth><nc:name>10g</nc:name><nc:metric>40</nc:metric>
#   </nc:bandwidth></nc:bandwidth-based-metrics></nc:interface><nc:stub>
#   <nc:default-metric>200</nc:default-metric></nc:stub></nc:area></nc:ospf></nc:protocols>
#
# after:
#   - areas:
#     - area_id: 0.0.0.110
#       area_range: '[''20.200.17.0/24'', ''20.200.15.0/24'']'
#       area_ranges:
#       - address: 20.200.17.0/24
#         exact: true
#         override_metric: 2000
#         restrict: true
#       - address: 20.200.15.0/24
#         exact: true
#         override_metric: 2000
#         restrict: true
#       interfaces:
#       - bandwidth_based_metrics:
#         - bandwidth: 1g
#           metric: 5
#         - bandwidth: 10g
#           metric: 40
#         metric: 5
#         name: so-0/0/0.0
#         passive: true
#         priority: 3
#       stub:
#         default_metric: 200
#         set: true
#     reference_bandwidth: 10g
#     rfc1583compatibility: false

# After state
# -----------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.110 {
#     stub default-metric 200;
#     area-range 20.200.17.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     area-range 20.200.15.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#     }
# }
# Using deleted
#
# Before state
# ------------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.110 {
#     stub default-metric 200;
#     area-range 20.200.17.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     area-range 20.200.15.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#     }
# }

- name: Delete OSPFv2 running config.
  junipernetworks.junos.junos_ospfv2:
    config:
    state: deleted

# Task Output:
# ------------
#
# before:
#   - areas:
#     - area_id: 0.0.0.110
#       area_range: '[''20.200.17.0/24'', ''20.200.15.0/24'']'
#       area_ranges:
#       - address: 20.200.17.0/24
#         exact: true
#         override_metric: 2000
#         restrict: true
#       - address: 20.200.15.0/24
#         exact: true
#         override_metric: 2000
#         restrict: true
#       interfaces:
#       - bandwidth_based_metrics:
#         - bandwidth: 1g
#           metric: 5
#         - bandwidth: 10g
#           metric: 40
#         metric: 5
#         name: so-0/0/0.0
#         passive: true
#         priority: 3
#       stub:
#         default_metric: 200
#         set: true
#     reference_bandwidth: 10g
#     rfc1583compatibility: false
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:ospf><nc:area delete="delete">0.0.0.100</nc:area><nc:reference-bandwidth delete="delete"/>
#   <nc:no-rfc-1583 delete="delete"/></nc:ospf></nc:protocols>
#
# after: []
#
#
# After state
# -----------
#
# admin# show protocols ospf

# Using gathered
#
# Before state
# ------------
#
# admin# show protocols ospf
# reference-bandwidth 10g;
# no-rfc-1583;
# area 0.0.0.100 {
#     stub default-metric 100;
#     area-range 10.200.17.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     area-range 10.200.15.0/24 {
#         restrict;
#         exact;
#         override-metric 2000;
#     }
#     interface so-0/0/0.0 {
#         passive;
#         bandwidth-based-metrics {
#             bandwidth 1g metric 5;
#             bandwidth 10g metric 40;
#         }
#         metric 5;
#         priority 3;
#         retransmit-interval 2;
#         hello-interval 2;
#         dead-interval 4;
#         poll-interval 2;
#     }
# }

- name: Gather Junos OSPFv2 running-configuration
  junipernetworks.junos.junos_ospfv2:
    config:
    state: gathered
#
#
# Task Output:
# ------------
#
# gathered:
#
#  - areas:
# - area_id: 0.0.0.100
#   area_range: '[''10.200.17.0/24'', ''10.200.15.0/24'']'
#   area_ranges:
#   - address: 10.200.17.0/24
#     exact: true
#     override_metric: 2000
#     restrict: true
#   - address: 10.200.15.0/24
#     exact: true
#     override_metric: 2000
#     restrict: true
#   interfaces:
#   - bandwidth_based_metrics:
#     - bandwidth: 1g
#       metric: 5
#     - bandwidth: 10g
#       metric: 40
#     metric: 5
#     name: so-0/0/0.0
#     passive: true
#     priority: 3
#     timers:
#       dead_interval: 4
#       hello_interval: 2
#       poll_interval: 2
#       retransmit_interval: 2
#   stub:
#     default_metric: 100
#     set: true
# reference_bandwidth: 10g
# rfc1583compatibility: false

# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <protocols>
#             <ospf>
#             <reference-bandwidth>10g</reference-bandwidth>
#             <no-rfc-1583/>
#             <area>
#                 <name>0.0.0.100</name>
#                 <stub>
#                     <default-metric>100</default-metric>
#                 </stub>
#                 <area-range>
#                     <name>10.200.16.0/24</name>
#                     <exact/>
#                     <override-metric>10000</override-metric>
#                 </area-range>
#                 <area-range>
#                     <name>10.200.11.0/24</name>
#                     <restrict/>
#                     <exact/>
#                 </area-range>
#                 <interface>
#                     <name>so-0/0/0.0</name>
#                     <passive>
#                     </passive>
#                     <bandwidth-based-metrics>
#                         <bandwidth>
#                             <name>1g</name>
#                             <metric>5</metric>
#                         </bandwidth>
#                         <bandwidth>
#                             <name>10g</name>
#                             <metric>40</metric>
#                         </bandwidth>
#                     </bandwidth-based-metrics>
#                     <metric>5</metric>
#                     <priority>3</priority>
#                     <retransmit-interval>2</retransmit-interval>
#                     <hello-interval>2</hello-interval>
#                     <dead-interval>4</dead-interval>
#                     <poll-interval>2</poll-interval>
#                 </interface>
#             </area>
#         </ospf>
#         </protocols>
#         <routing-options>
#             <static>
#                 <route>
#                     <name>172.16.17.0/24</name>
#                     <discard />
#                 </route>
#             </static>
#             <router-id>10.200.16.75</router-id>
#             <autonomous-system>
#                 <as-number>65432</as-number>
#             </autonomous-system>
#         </routing-options>
#     </configuration>
# </rpc-reply>


- name: Parsed the ospfv2 config into structured ansible resource facts.
  junipernetworks.junos.junos_ospfv2:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
# Task Output:
# ------------
#
# parsed:
# - areas:
#     - area_id: 0.0.0.100
#       area_range: '[''10.200.16.0/24'', ''10.200.11.0/24'']'
#       area_ranges:
#       - address: 10.200.16.0/24
#         exact: true
#         override_metric: 10000
#       - address: 10.200.11.0/24
#         exact: true
#         restrict: true
#       interfaces:
#       - bandwidth_based_metrics:
#         - bandwidth: 1g
#           metric: 5
#         - bandwidth: 10g
#           metric: 40
#         metric: 5
#         name: so-0/0/0.0
#         passive: true
#         priority: 3
#         timers:
#           dead_interval: 4
#           hello_interval: 2
#           poll_interval: 2
#           retransmit_interval: 2
#       stub:
#         default_metric: 100
#         set: true
#     reference_bandwidth: 10g
#     rfc1583compatibility: false
#     router_id: 10.200.16.75

# Using rendered
#
- name: Render the commands for provided  configuration
  junipernetworks.junos.junos_ospfv2:
    config:
      - reference_bandwidth: 10g
        areas:
          - area_id: 0.0.0.100
            area_ranges:
              - address: 10.200.17.0/24
                exact: true
                restrict: true
                override_metric: 2000
              - address: 10.200.15.0/24
                exact: true
                restrict: true
                override_metric: 2000
            stub:
              default_metric: 100
              set: true
            interfaces:
              - name: so-0/0/0.0
                priority: 3
                metric: 5
                flood_reduction: false
                passive: true
                bandwidth_based_metrics:
                  - bandwidth: 1g
                    metric: 5
                  - bandwidth: 10g
                    metric: 40
                timers:
                  dead_interval: 4
                  hello_interval: 2
                  poll_interval: 2
                  retransmit_interval: 2
        rfc1583compatibility: false
    state: rendered

# Task Output:
# ------------
#
# rendered: "<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:ospf><nc:reference-bandwidth>10g</nc:reference-bandwidth><nc:no-rfc-1583/><nc:area><nc:name>0.0.0.100</nc:name>
# <nc:area-range><nc:name>10.200.17.0/24</nc:name><nc:exact/><nc:restrict/><nc:override-metric>2000</nc:override-metric>
# </nc:area-range><nc:area-range><nc:name>10.200.15.0/24</nc:name><nc:exact/><nc:restrict/>
# <nc:override-metric>2000</nc:override-metric></nc:area-range><nc:interface><nc:name>so-0/0/0.0</nc:name>
# <nc:priority>3</nc:priority><nc:metric>5</nc:metric><nc:passive/><nc:bandwidth-based-metrics><nc:bandwidth>
# <nc:name>1g</nc:name><nc:metric>5</nc:metric></nc:bandwidth><nc:bandwidth><nc:name>10g</nc:name>
# <nc:metric>40</nc:metric></nc:bandwidth></nc:bandwidth-based-metrics><nc:dead-interval>4</nc:dead-interval>
# <nc:hello-interval>2</nc:hello-interval><nc:poll-interval>2</nc:poll-interval>
# <nc:retransmit-interval>2</nc:retransmit-interval></nc:interface><nc:stub>
# <nc:default-metric>100</nc:default-metric></nc:stub></nc:area></nc:ospf></nc:protocols>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration module invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the module invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\">< nc:ospf><nc:area delete=\"delete\">0.0.0.100</nc:area><nc:reference-bandwidth delete=\"delete\"/> <nc:no-rfc-1583 delete=\"delete\"/></nc:ospf></nc:protocols>", "xml 2", "xml 3"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\">"]

Authors

  • Daniel Mellado (@dmellado)

  • Rohit Thakur (@rohitthakur2590)