You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

junipernetworks.junos.junos_static_routes module – Static routes resource module

Note

This module is part of the junipernetworks.junos collection (version 5.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_static_routes.

New in junipernetworks.junos 1.0.0

Synopsis 

This module provides declarative management of static routes on Juniper JUNOS devices

Note

This module has a corresponding action plugin.

Aliases: static_routes

Requirements 

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)
xmltodict (>=0.12)

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of static routes options
address_families list / elements=dictionary	Address family to use for the static routes
afi string / required	afi to use for the static routes Choices: `"ipv4"` `"ipv6"`
routes list / elements=dictionary	Static route configuration
dest string	Static route destination including prefix
metric integer	Metric value for the static route
next_hop list / elements=dictionary	Next hop to destination
forward_router_address string	List of next hops
vrf string	Virtual Routing and Forwarding (VRF) name
running_config string	This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show routing-options. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result
state string	The state the configuration should be left in Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

This module requires the netconf system service be enabled on the device being managed.
This module works with connection netconf. See the Junos OS Platform Options.
Tested against JunOS v18.4R1

Examples 

# Using deleted

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Delete provided configuration (default operation is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.1.2
    state: deleted

# Task Output
# -----------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - '<nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route
#     delete="delete"><nc:name>192.168.16.0/24</nc:name></nc:route></nc:static></nc:routing-options>'
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
# }

# Using merged

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
# }

- name: Merge provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.1.2
    state: merged

# Task Output
# -----------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - '<nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route><nc:name>192.168.16.0/24</nc:name>
#     <nc:next-hop>172.16.1.2</nc:next-hop></nc:route></nc:static></nc:routing-options>'
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

# Using overridden

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Override running configuration with provided configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.0.1
    state: overridden
# Task Output:
# ------------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - >-
#     <nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route
#     delete="delete"><nc:name>192.168.47.0/24</nc:name></nc:route><nc:route
#     delete="delete"><nc:name>192.168.16.0/24</nc:name></nc:route></nc:static><nc:static><nc:route><nc:name>192.168.16.0/24</nc:name><nc:next-hop>172.16.0.1</nc:next-hop></nc:route></nc:static></nc:routing-options>
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.0.1

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.16.0/24 next-hop 172.16.0.1;
# }

# Using replaced

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Replace provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.47.0/24
                next_hop:
                  - forward_router_address: 10.200.16.2
    state: replaced

# Task Output:
# ------------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - >-
#     <nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route
#     delete="delete"><nc:name>192.168.47.0/24</nc:name></nc:route></nc:static><nc:static><nc:route><nc:name>192.168.47.0/24</nc:name><nc:next-hop>10.200.16.2</nc:next-hop></nc:route></nc:static></nc:routing-options>
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 10.200.16.2

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 10.200.16.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

# Using gathered to gather static route facts from the device
# Before state
# ------------
# admin# show routing-options
# static {
#     route 192.168.16.0/24 next-hop 172.16.1.2;
#     route 192.168.47.0/24 next-hop 10.200.16.2;
# }
- name: Gather static routes facts from the device using junos_static_routes module
  junipernetworks.junos.junos_static_routes:
    state: gathered

# Task output:
# ------------
# gathered:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 10.200.16.2

# Using rendered

- name: Render platform specific commands (without connecting to the device)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.1.2
    state: rendered

# Task output:
# ------------
# rendered:
#   - '<nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route><nc:name>192.168.16.0/24</nc:name>
#     <nc:next-hop>172.16.1.2</nc:next-hop></nc:route></nc:static></nc:routing-options>'

# Using parsed

# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <routing-options>
#         <static>
#             <route>
#                 <name>192.168.16.0/24</name>
#                 <next-hop>172.16.1.2</next-hop>
#                 <next-hop>172.16.1.3</next-hop>
#             </route>
#             <route>
#                 <name>192.168.47.0/24</name>
#                 <next-hop>10.200.16.2</next-hop>
#             </route>
#         </static>
#     </routing-options>
#     </configuration>
# </rpc-reply>

- name: Parsed running config (without connecting to the device)
  junipernetworks.junos.junos_static_routes:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output:
# ------------
# parsed:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: '[''172.16.1.2'', ''172.16.1.3'']'
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 10.200.16.2

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after string	The resulting configuration model invocation. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before string	The configuration prior to the model invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["command 1", "command 2", "command 3"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\">"]`

Authors

Daniel Mellado (@dmellado)

junipernetworks.junos.junos_static_routes module – Static routes resource module

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 