netapp.ontap.na_ontap_interface module – NetApp ONTAP LIF configuration
Note
This module is part of the netapp.ontap collection (version 22.8.3).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install netapp.ontap.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: netapp.ontap.na_ontap_interface.
New in netapp.ontap 2.6.0
Synopsis
Creating / deleting and modifying the LIF.
Requirements
The below requirements are needed on the host that executes this module.
Ansible 2.9 or later - 2.12 or later is recommended.
Python3 - 3.9 or later is recommended.
When using ZAPI, netapp-lib 2018.11.13 or later (install using ‘pip install netapp-lib’), netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues
a physical or virtual clustered Data ONTAP system, the modules support Data ONTAP 9.1 and onward, REST support requires ONTAP 9.6 or later
Parameters
Parameter |
Comments |
|---|---|
Specifies the LIF’s IP address. ZAPI - Required when REST - Required when |
|
Specifies the administrative status of the LIF. Choices:
|
|
broadcast_domain name can be used to specify the location on an IP interface with REST, as an alternative to node or port. only used when creating an IP interface to select a node, ignored if the interface already exists. if the broadcast domain is not found, make sure to check the ipspace value. home_port and broadcast_domain are mutually exclusive. home_node may or may not be present. not supported for FC interface. ignored with ZAPI. |
|
path to SSL client cert file (.pem). not supported with python 2.6. |
|
Specifies the LIF’s current node. By default, this is home_node |
|
Specifies the LIF’s current port. |
|
The data protocol for which the FC interface is configured. Ignored with ZAPI or for IP interfaces. Required to create a FC type interface. Choices:
|
|
Specifies the unique, fully qualified domain name of the DNS zone of this LIF. Supported from ONTAP 9.9.0 or later in REST. Not supported for FC interfaces. |
|
Creating or updating an IP Interface fails if the specified IP address falls within the address range of a named subnet. Set this value to false to use the specified IP address and to assign the subnet owning that address to the interface. This option is only supported with REST and requires ONTAP 9.11.1 or later. Choices:
|
|
Specifies the failover group for the LIF. Not supported with REST. |
|
Specifies the failover policy for the LIF. When using REST, this values are mapped to ‘home_port_only’, ‘default’, ‘home_node_only’, ‘sfo_partners_only’, ‘broadcast_domain_only’. Choices:
|
|
Specifies the failover scope for the LIF. REST only, and only for IP interfaces. Not supported for FC interfaces. Choices:
|
|
Enable or disable a new feature. This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility. Supported keys and values are subject to change without notice. Unknown keys are ignored. |
|
Specifies the firewall policy for the LIF. This option is deprecated in REST. With REST, the module tries to derive a service_policy and may error out. |
|
Override the cluster ONTAP version when using REST. The behavior is undefined if the version does not match the target cluster. This is provided as a work-around when the cluster version cannot be read because of permission issues. See https://github.com/ansible-collections/netapp.ontap/wiki/Known-issues. This should be in the form 9.10 or 9.10.1 with each element being an integer number. When Ignored with ZAPI. |
|
Set this to true to acquire the address from the named subnet and assign the subnet to the LIF. not supported with REST. Choices:
|
|
name of the interface to be renamed |
|
Specifies the LIF’s home node. By default, the first node from the cluster is considered as home node. |
|
Specifies the LIF’s home port. Requires ONTAP 9.8 or later with FC interfaces when using REST. With REST, at least one of home_port, home_node, or broadcast_domain is required to create IP interfaces. With REST, either home_port or current_port is required to create FC interfaces. With ZAPI, home_port is required to create IP and FC interfaces. home_port and broadcast_domain are mutually exclusive (REST and IP interfaces). |
|
The hostname or IP address of the ONTAP instance. |
|
Override the default port (80 or 443) with this port |
|
Enable and disable https. Ignored when using REST as only https is supported. Ignored when using SSL certificate authentication as it requires SSL. Choices:
|
|
ignore unsupported options that should not be relevant. ignored with ZAPI. Choices:
Default: |
|
Specifies the logical interface (LIF) name. |
|
type of the interface. IP is assumed if address or netmask are present. IP interfaces includes cluster, intercluster, management, and NFS, CIFS, iSCSI interfaces. FC interfaces includes FCP and NVME-FC interfaces. ignored with ZAPI. required with REST, but maybe derived from deprecated options like Choices:
|
|
IPspace name is required with REST for cluster-scoped interfaces. It is optional with SVM scope. ignored with ZAPI. ignored for FC interface. |
|
If true, data LIF will revert to its home node under certain circumstances such as startup, and load balancing migration capability is disabled automatically Choices:
|
|
Specifies if DNS update is enabled for this LIF. Dynamic updates will be sent for this LIF if updates are enabled at Vserver level. Supported from ONTAP 9.9.1 or later in REST. Not supported for FC interfaces. Choices:
|
|
Specifies the LIF’s are to acquire a ipv4 link local address. Use case for this is when creating Cluster LIFs to allow for auto assignment of ipv4 link local address. Not supported in REST Choices:
|
|
path to SSL client key file. |
|
If True, this IP address will listen for DNS queries for the dnszone specified. Not supported with REST. Choices:
|
|
Specifies the LIF’s netmask. ZAPI - Required when REST - Required when |
|
The ontap api version to use |
|
Password for the specified user. |
|
Probe port for Cloud load balancer - only valid in the Azure environment. Not supported with ZAPI or with FC interfaces. Requires ONTAP 9.10.1 or later. |
|
Specifies the list of data protocols configured on the LIF. By default, the values in this element are nfs, cifs and fcache. Other supported protocols are iscsi and fcp. A LIF can be configured to not support any data protocols by specifying ‘none’. Protocol values of none, iscsi, fc-nvme or fcp can’t be combined with any other data protocol(s). address, netmask and firewall_policy parameters are not supported for ‘fc-nvme’ option. This option is ignored with REST, though it can be used to derive |
|
Specifies the role of the LIF. When setting role as “intercluster” or “cluster”, setting protocol is not supported. When creating a “cluster” role, the node name will appear as the prefix in the name of LIF. For example, if the specified name is clif and node name is node1, the LIF name appears in the ONTAP as node1_clif. Possible values are ‘undef’, ‘cluster’, ‘data’, ‘node-mgmt’, ‘intercluster’, ‘cluster-mgmt’. Required when This option is deprecated in REST. With REST, the module tries to derive a service_policy and may error out. |
|
Starting with ONTAP 9.5, you can configure LIF service policies to identify a single service or a list of services that will use a LIF. In ONTAP 9.5, you can assign service policies only for LIFs in the admin SVM. In ONTAP 9.6, you can additionally assign service policies for LIFs in the data SVMs. When you specify a service policy for a LIF, you need not specify the data protocol and role for the LIF. NOTE that role is still required because of a ZAPI issue. This limitation is removed in ONTAP 9.8. Creating LIFs by specifying the role and data protocols is also supported. |
|
Whether the specified interface should exist or not. Choices:
|
|
Subnet where the IP interface address is allocated from. If the option is not used, the IP address and netmask need to be provided. With REST, ONTAP 9.11.1 or later is required. With REST, ipspace must be set. |
|
Whether to use REST or ZAPI. always – will always use the REST API if the module supports REST. A warning is issued if the module does not support REST. An error is issued if a module option is not supported in REST. never – will always use ZAPI if the module supports ZAPI. An error may be issued if a REST option is not supported in ZAPI. auto – will try to use the REST API if the module supports REST and modules options are supported. Reverts to ZAPI otherwise. Default: |
|
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/. Two authentication methods are supported
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled. |
|
If set to This should only set to Choices:
|
|
The name of the vserver to use. Required with ZAPI. Required with REST for FC interfaces (data vservers). Required with REST for SVM-scoped IP interfaces (data vservers). Invalid with REST for cluster-scoped IP interfaces. To help with transition from ZAPI to REST, vserver is ignored when the role is set to ‘cluster’, ‘node-mgmt’, ‘intercluster’, ‘cluster-mgmt’. Remove this option to suppress the warning. |
Notes
Note
REST support requires ONTAP 9.7 or later.
Support check_mode.
The modules prefixed with na_ontap are built to support the ONTAP storage platform.
https is enabled by default and recommended. To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’
Examples
- name: Create interface - ZAPI
netapp.ontap.na_ontap_interface:
state: present
interface_name: data2
home_port: e0d
home_node: laurentn-vsim1
role: data
protocols:
- nfs
- cifs
admin_status: up
failover_policy: local-only
firewall_policy: mgmt
is_auto_revert: true
address: 10.10.10.10
netmask: 255.255.255.0
force_subnet_association: false
dns_domain_name: test.com
listen_for_dns_query: true
is_dns_update_enabled: true
vserver: svm1
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Create data interface - REST - NAS
netapp.ontap.na_ontap_interface:
state: present
interface_name: data2
home_port: e0d
home_node: laurentn-vsim1
admin_status: up
failover_scope: home_node_only
service_policy: default-data-files
is_auto_revert: true
interface_type: ip
address: 10.10.10.10
netmask: 255.255.255.0
vserver: svm1
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Create cluster interface - ZAPI
netapp.ontap.na_ontap_interface:
state: present
interface_name: cluster_lif
home_port: e0a
home_node: cluster1-01
role: cluster
admin_status: up
is_auto_revert: true
is_ipv4_link_local: true
vserver: Cluster
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Create cluster interface - REST
netapp.ontap.na_ontap_interface:
state: present
interface_name: cluster_lif
home_port: e0a
home_node: cluster1-01
service_policy: default-cluster
admin_status: up
is_auto_revert: true
vserver: Cluster
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Rename interface
netapp.ontap.na_ontap_interface:
state: present
from_name: ansibleSVM_lif
interface_name: ansibleSVM_lif01
vserver: ansibleSVM
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Migrate an interface
netapp.ontap.na_ontap_interface:
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
vserver: ansible
https: true
validate_certs: false
state: present
interface_name: carchi_interface3
home_port: e0d
home_node: ansdev-stor-1
current_node: ansdev-stor-2
role: data
failover_policy: local-only
firewall_policy: mgmt
is_auto_revert: true
address: 10.10.10.12
netmask: 255.255.255.0
force_subnet_association: false
admin_status: up
- name: Delete interface
netapp.ontap.na_ontap_interface:
state: absent
interface_name: data2
vserver: svm1
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"