arista.eos.eos_l2_interfaces module – L2 interfaces resource module

Note

This module is part of the arista.eos collection (version 6.2.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_l2_interfaces.

New in arista.eos 1.0.0

Synopsis

  • This module provides declarative management of Layer-2 interface on Arista EOS devices.

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of Layer-2 interface options

access

dictionary

Switchport mode access command to configure the interface as a layer 2 access.

vlan

integer

Configure given VLAN in access port. It’s used as the access VLAN ID.

mode

string

Mode in which interface needs to be configured.

Access mode is not shown in interface facts, so idempotency will not be maintained for switchport mode access and every time the output will come as changed=True.

Choices:

  • "access"

  • "trunk"

name

string / required

Full name of interface, e.g. Ethernet1.

trunk

dictionary

Switchport mode trunk command to configure the interface as a Layer 2 trunk.

native_vlan

integer

Native VLAN to be configured in trunk port. It is used as the trunk native VLAN ID.

trunk_allowed_vlans

list / elements=string

List of allowed VLANs in a given trunk port. These are the only VLANs that will be configured on the trunk.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the EOS device by executing the command show running-config | section ^interface.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "parsed"

  • "rendered"

  • "gathered"

Notes

Note

Examples

# Using merged

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Merge provided configuration with device configuration.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
        mode: trunk
        trunk:
          native_vlan: 10
      - name: Ethernet2
        mode: access
        access:
          vlan: 30
    state: merged

# Task Output
# -----------
#
# before:
# - name: Ethernet1
# - name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet1
# - switchport mode trunk
# - switchport trunk native vlan 10
# - interface Ethernet2
# - switchport mode access
# - switchport access vlan 30
# after:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 10
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using replaced

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Replace device configuration of specified L2 interfaces with provided configuration.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
        mode: trunk
        trunk:
          native_vlan: 20
          trunk_allowed_vlans: 5-10, 15
    state: replaced

# Task Output
# -----------
#
# before:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 10
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet1
# - switchport trunk native vlan 20
# - switchport trunk allowed vlan 10,15,5,6,7,8,9
# after:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 20
#     trunk_allowed_vlans:
#     - 5-10
#     - '15'
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 20
#    switchport trunk allowed vlan 5-10,15
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using overridden

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 20
#    switchport trunk allowed vlan 5-10,15
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Override device configuration of all L2 interfaces on device with provided
    configuration.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet2
        mode: access
        access:
          vlan: 30
    state: overridden

# Task Output
# -----------
#
# before:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 20
#     trunk_allowed_vlans:
#     - 5-10
#     - '15'
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet1
# - no switchport mode
# - no switchport trunk allowed vlan
# - no switchport trunk native vlan
# - interface Ethernet2
# - switchport mode access
# after:
# - name: Ethernet1
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using deleted

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Delete EOS L2 interfaces as in given arguments.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
      - name: Ethernet2
    state: deleted

# Task Output
# -----------
#
# before:
# - name: Ethernet1
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet2
# - no switchport access vlan
# after:
# - name: Ethernet1
# - name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# using rendered

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
        mode: trunk
        trunk:
          native_vlan: 10
      - name: Ethernet2
        mode: access
        access:
          vlan: 30
    state: rendered

# Module Execution Result:
# ------------------------
#
# rendered:
# - interface Ethernet1
# - switchport mode trunk
# - switchport trunk native vlan 10
# - interface Ethernet2
# - switchport mode access
# - switchport access vlan 30

# Using parsed

# File: parsed.cfg
# ----------------
#
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !

- name: Parse the commands for provided configuration
  arista.eos.l2_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# parsed:
#  - name: Ethernet1
#    mode: trunk
#    trunk:
#      native_vlan: 10
#  - name: Ethernet2
#    mode: access
#    access:
#      vlan: 30

# Using gathered

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !

- name: Gather interfaces facts from the device
  arista.eos.l2_interfaces:
    state: gathered

# Module Execution Result:
# ------------------------
#
# gathered:
# - name: Ethernet1
#   mode: trunk
#   trunk:
#     native_vlan: 10
# - name: Ethernet2
#   mode: access
#   access:
#     vlan: 30

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["interface Ethernet1", "switchport mode trunk", "switchport access vlan 20"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["interface Ethernet1", "switchport mode trunk", "switchport access vlan 20"]

Authors

  • Nathaniel Case (@Qalthos)