cisco.ios.ios_bgp_global module – Resource module to configure BGP.

Note

This module is part of the cisco.ios collection (version 5.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_bgp_global.

New in cisco.ios 1.3.0

Synopsis 

This module configures and manages the attributes of global bgp on Cisco IOS.

Note

This module has a corresponding action plugin.

Aliases: bgp_global

Parameters 

Parameter	Comments
config dictionary	A dictionary of options for bgp configurations.
aggregate_address dictionary	Configure BGP aggregate entry This option is DEPRECATED and is replaced with aggregate_addresses which accepts list of dict as input, this attribute will be removed after 2024-06-01.
address string	Specify aggregate address
advertise_map string	Set condition to advertise attribute
as_confed_set boolean	Generate AS confed set path information Choices: `false` `true`
as_set boolean	Generate AS set path information Choices: `false` `true`
attribute_map string	Set attributes of aggregate
netmask string	Specify aggregate mask
summary_only boolean	Filter more specific routes from updates Choices: `false` `true`
suppress_map string	Conditionally filter more specific routes from updates
aggregate_addresses list / elements=dictionary	Configure BGP aggregate entries
address string	Specify aggregate address
advertise_map string	Set condition to advertise attribute
as_confed_set boolean	Generate AS confed set path information Choices: `false` `true`
as_set boolean	Generate AS set path information Choices: `false` `true`
attribute_map string	Set attributes of aggregate
netmask string	Specify aggregate mask
summary_only boolean	Filter more specific routes from updates Choices: `false` `true`
suppress_map string	Conditionally filter more specific routes from updates
as_number string	Autonomous system number
auto_summary boolean	Enable automatic network number summarization Choices: `false` `true`
bgp dictionary	Enable address family and enter its config mode
additional_paths dictionary	Additional paths in the BGP table
install boolean	Additional paths to install into RIB Choices: `false` `true`
receive boolean	Receive additional paths from neighbors Choices: `false` `true`
select dictionary	Selection criteria to pick the paths
all boolean	Select all available paths Choices: `false` `true`
best integer	Select best N paths (2-3).
best_external boolean	Select best-external path Choices: `false` `true`
group_best boolean	Select group-best path Choices: `false` `true`
send boolean	Send additional paths to neighbors Choices: `false` `true`
advertise_best_external boolean	Advertise best external path to internal peers Choices: `false` `true`
aggregate_timer integer	Configure Aggregation Timer Please refer vendor documentation for valid values
always_compare_med boolean	Allow comparing MED from different neighbors Choices: `false` `true`
asnotation boolean	Change the default as plain notation asdot notation Choices: `false` `true`
bestpath list / elements=dictionary	Change the default bestpath selection This option is DEPRECATED and replaced with bestpath_options of type dict, this attribute will be removed after 2024-06-01.
aigp boolean	if both paths doesn’t have aigp ignore on bestpath comparison ignore Choices: `false` `true`
compare_routerid boolean	Compare router-id for identical EBGP paths Choices: `false` `true`
cost_community boolean	cost community Choices: `false` `true`
igp_metric boolean	igp metric Ignore igp metric in bestpath selection Choices: `false` `true`
med dictionary	MED attribute
confed boolean	Compare MED among confederation paths Choices: `false` `true`
missing_as_worst boolean	Treat missing MED as the least preferred one Choices: `false` `true`
bestpath_options dictionary	Change the default bestpath selection
aigp boolean	if both paths doesn’t have aigp ignore on bestpath comparison ignore Choices: `false` `true`
compare_routerid boolean	Compare router-id for identical EBGP paths Choices: `false` `true`
cost_community boolean	cost community Choices: `false` `true`
igp_metric boolean	igp metric Ignore igp metric in bestpath selection Choices: `false` `true`
med dictionary	MED attribute
confed boolean	Compare MED among confederation paths Choices: `false` `true`
missing_as_worst boolean	Treat missing MED as the least preferred one Choices: `false` `true`
client_to_client dictionary	Configure client to client route reflection
all boolean	inter-cluster and intra-cluster (default) Choices: `false` `true`
intra_cluster string	intra cluster reflection intra-cluster reflection for cluster-id
set boolean	set reflection of routes allowed Choices: `false` `true`
cluster_id string	Configure Route-Reflector Cluster-id (peers may reset) A.B.C.D/Please refer vendor documentation for valid Route-Reflector Cluster-id
confederation dictionary	AS confederation parameters
identifier string	Set routing domain confederation AS AS number
peers string	Peer ASs in BGP confederation AS number
consistency_checker dictionary	Consistency-checker
auto_repair dictionary	Auto-Repair
interval integer	Set the bgp consistency checker Please refer vendor documentation for valid values
set boolean	Enable Auto-Repair Choices: `false` `true`
error_message dictionary	Log Error-Msg
interval integer	Set the bgp consistency checker Please refer vendor documentation for valid values
set boolean	Enable Error-Msg Choices: `false` `true`
dampening dictionary	Enable route-flap dampening
max_suppress integer	Maximum duration to suppress a stable route Please refer vendor documentation for valid values
penalty_half_time integer	Half-life time for the penalty Please refer vendor documentation for valid values
reuse_route_val integer	Value to start reusing a route Please refer vendor documentation for valid values
route_map string	Route-map to specify criteria for dampening
suppress_route_val integer	Value to start suppressing a route Please refer vendor documentation for valid values
deterministic_med boolean	Pick the best-MED path among paths advertised from the neighboring AS Choices: `false` `true`
dmzlink_bw boolean	Use DMZ Link Bandwidth as weight for BGP multipaths Choices: `false` `true`
enforce_first_as boolean	Enforce the first AS for EBGP routes(default) Choices: `false` `true`
enhanced_error boolean	Enabled BGP Enhanced error handling Choices: `false` `true`
fast_external_fallover boolean	Immediately reset session if a link to a directly connected external peer goes down Choices: `false` `true`
graceful_restart dictionary	Graceful restart capability parameters
extended boolean	Enable Graceful-Restart Extension Choices: `false` `true`
restart_time integer	Set the max time needed to restart and come back up Please refer vendor documentation for valid values
set boolean	Set Graceful-Restart Choices: `false` `true`
stalepath_time integer	Set the max time to hold onto restarting peer’s stale paths Please refer vendor documentation for valid values
graceful_shutdown dictionary	Graceful shutdown capability parameters
community string	Set Community for Gshut routes community number/community number in aa:nn format
local_preference integer	Set Local Preference for Gshut routes Please refer vendor documentation for valid values
neighbors dictionary	Gracefully shut down all neighbors
activate boolean	Activate graceful shutdown of all neighbors Choices: `false` `true`
time integer	time in seconds Please refer vendor documentation for valid values
vrfs dictionary	Gracefully shut down all vrf neighbors
activate boolean	Activate graceful shutdown of all neighbors Choices: `false` `true`
time integer	time in seconds Please refer vendor documentation for valid values
inject_map dictionary	Routemap which specifies prefixes to inject This option is DEPRECATED and is updated with inject_maps which is a list of dict, this attribute will be removed after 2024-06-01.
copy_attributes boolean	Copy attributes from aggregate Choices: `false` `true`
exist_map_name string	route-map name
name string	route-map name
inject_maps list / elements=dictionary	Routemap which specifies prefixes to inject
copy_attributes boolean	Copy attributes from aggregate Choices: `false` `true`
exist_map_name string	route-map name
name string	route-map name
listen dictionary	Neighbor subnet range listener
limit integer	Set the max limit for the dynamic subnet range neighbors Please refer vendor documentation for valid values
range dictionary	Subnet network range
host_with_subnet string	IPv4 subnet range(A.B.C.D/nn) IPv6 subnet range(X:X:X:X::X/<0-128>)
ipv4_with_subnet string	IPv4 subnet range(A.B.C.D/nn) This option is DEPRECATED and is updated with host_with_subnet which is a common attribute for address, this attribute will be removed after 2024-06-01.
ipv6_with_subnet string	IPv6 subnet range(X:X:X:X::X/<0-128>) This option is DEPRECATED and is updated with host_with_subnet which is a common attribute for address attribute will be removed after 2024-06-01.
peer_group string	Member of the peer-group
log_neighbor_changes boolean	Log neighbor up/down and reset reason Choices: `false` `true`
maxas_limit integer	Allow AS-PATH attribute from any neighbor imposing a limit on number of ASes Please refer vendor documentation for valid values
maxcommunity_limit integer	Allow COMMUNITY attribute from any neighbor imposing a limit on number of communities Please refer vendor documentation for valid values
maxextcommunity_limit integer	Allow EXTENDED COMMUNITY attribute from any neighbor imposing a limit on number of extended communities Please refer vendor documentation for valid values
nexthop dictionary	Nexthop tracking commands
route_map string	Route map for valid nexthops
trigger dictionary	nexthop trackings
delay integer	Set the delay to trigger nexthop tracking Please refer vendor documentation for valid values
enable boolean	Enable nexthop tracking Choices: `false` `true`
nopeerup_delay list / elements=dictionary	Set how long BGP will wait for the first peer to come up before beginning the update delay or graceful restart timers (in seconds) This option is DEPRECATED and is replaced with nopeerup_delay_options which is of type dict, this attribute will be removed after 2024-06-01.
cold_boot integer	How long to wait for the first peer to come up upon a cold boot Please refer vendor documentation for valid values
nsf_switchover integer	How long to wait for the first peer, post NSF switchover Please refer vendor documentation for valid values
post_boot integer	How long to wait for the first peer to come up once the system is already booted and all peers go down Please refer vendor documentation for valid values
user_initiated integer	How long to wait for the first peer, post a manual clear of BGP peers by the admin user Please refer vendor documentation for valid values
nopeerup_delay_options dictionary	Set how long BGP will wait for the first peer to come up before beginning the update delay or graceful restart timers (in seconds)
cold_boot integer	How long to wait for the first peer to come up upon a cold boot Please refer vendor documentation for valid values
nsf_switchover integer	How long to wait for the first peer, post NSF switchover Please refer vendor documentation for valid values
post_boot integer	How long to wait for the first peer to come up once the system is already booted and all peers go down Please refer vendor documentation for valid values
user_initiated integer	How long to wait for the first peer, post a manual clear of BGP peers by the admin user Please refer vendor documentation for valid values
recursion boolean	recursion rule for the nexthops recursion via host for the nexthops Choices: `false` `true`
redistribute_internal boolean	Allow redistribution of iBGP into IGPs (dangerous) Choices: `false` `true`
refresh dictionary	refresh
max_eor_time integer	Configure refresh max-eor time Please refer vendor documentation for valid values
stalepath_time integer	Configure refresh stale-path time Please refer vendor documentation for valid values
regexp boolean	Select regular expression engine Enable bounded-execution-time regular expression engine Choices: `false` `true`
route_map boolean	route-map control commands Have route-map set commands take priority over BGP commands such as next-hop unchanged Choices: `false` `true`
router_id dictionary	Override configured router identifier (peers will reset)
address string	Manually configured router identifier(A.B.C.D)
interface string	Use IPv4 address on interface
vrf boolean	vrf-specific router id configuration Automatically assign per-vrf bgp router id Choices: `false` `true`
scan_time integer	Configure background scanner interval Please refer vendor documentation for valid values
slow_peer dictionary	Configure slow-peer
detection dictionary	Slow-peer detection
set boolean	Slow-peer detection Choices: `false` `true`
threshold integer	Set the slow-peer detection threshold Please refer vendor documentation for valid values
split_update_group dictionary	Configure slow-peer split-update-group
dynamic boolean	Dynamically split the slow peer to slow-update group Choices: `false` `true`
permanent boolean	Keep the slow-peer permanently in slow-update group Choices: `false` `true`
snmp boolean	BGP SNMP options BGP SNMP trap options Use cbgp Peer2Type as part of index for traps Choices: `false` `true`
soft_reconfig_backup boolean	Use soft-reconfiguration inbound only when route-refresh is not negotiated Choices: `false` `true`
sso boolean	Stateful Switchover Enable SSO only for Route-Refresh capable peers Choices: `false` `true`
suppress_inactive boolean	Suppress routes that are not in the routing table Choices: `false` `true`
transport boolean	Global enable/disable transport session parameters Transport path MTU discovery Choices: `false` `true`
update_delay integer	Set the max initial delay for sending update Please refer vendor documentation for valid values
update_group boolean	Manage peers in bgp update groups Split update groups based on Policy Keep peers with as-override in different update groups Choices: `false` `true`
upgrade_cli dictionary	Upgrade to hierarchical AFI mode
af_mode boolean	Upgrade to AFI mode Choices: `false` `true`
set boolean	enable upgrade to hierarchical AFI mode Choices: `false` `true`
bmp dictionary	BGP Monitoring Protocol
buffer_size integer	BMP Buffer Size Please refer vendor documentation for valid values
initial_refresh dictionary	Initial Refresh options
delay integer	Delay before Initial Refresh
skip boolean	skip all refreshes Choices: `false` `true`
server integer	Server Information Please refer vendor documentation for valid values
server_options dictionary	bmp server options
activate boolean	activate server Choices: `false` `true`
address dictionary	skip all refreshes
host string	host address
port integer	port number BMP server
default_information boolean	Control distribution of default information Distribute a default route Choices: `false` `true`
default_metric integer	Set metric of redistributed routes Please refer vendor documentation for valid values
distance dictionary	Define an administrative distance
admin dictionary	Administrative distance
acl string	IP Standard access list number IP Standard expanded access list number Standard access-list name
address string	IP Source address (A.B.C.D)
distance integer	Administrative distance Please refer vendor documentation for valid values
wildcard_bit string	Wildcard bits (A.B.C.D)
bgp dictionary	BGP distance
routes_external integer	Distance for routes external to the AS Please refer vendor documentation for valid values
routes_internal integer	Distance for routes internal to the AS Please refer vendor documentation for valid values
routes_local integer	Distance for local routes Please refer vendor documentation for valid values
mbgp dictionary	MBGP distance
routes_external integer	Distance for routes external to the AS Please refer vendor documentation for valid values
routes_internal integer	Distance for routes internal to the AS Please refer vendor documentation for valid values
routes_local integer	Distance for local routes Please refer vendor documentation for valid values
distribute_list dictionary	Filter networks in routing updates This option is DEPRECATED and is replaced with distributes which is of type list of dict, this attribute will be removed after 2024-06-01.
acl string	IP access list number/name
in boolean	Filter incoming routing updates Choices: `false` `true`
interface string	interface details
out boolean	Filter outgoing routing updates Choices: `false` `true`
distributes list / elements=dictionary	Filter networks in routing updates
acl string	IP access list number/name
gateway string	Filter prefixes in routing updates
in boolean	Filter incoming routing updates Choices: `false` `true`
interface string	interface details
out boolean	Filter outgoing routing updates Choices: `false` `true`
prefix string	Filtering incoming updates based on gateway
maximum_paths dictionary	Forward packets over multiple paths
eibgp integer	Both eBGP and iBGP paths as multipath
ibgp integer	iBGP-multipath
paths integer	Number of paths
maximum_secondary_paths dictionary	Maximum secondary paths
eibgp integer	Both eBGP and iBGP paths as secondary multipath
ibgp integer	iBGP-secondary-multipath
paths integer	Number of secondary paths
neighbors aliases: neighbor list / elements=dictionary	Specify a neighbor router
activate boolean	Enable the Address Family for this Neighbor Choices: `false` `true`
additional_paths dictionary	Negotiate additional paths capabilities with this neighbor
disable boolean	Disable additional paths for this neighbor Choices: `false` `true`
receive boolean	Receive additional paths from neighbors Choices: `false` `true`
send boolean	Send additional paths to neighbors Choices: `false` `true`
address string	Neighbor address (A.B.C.D) This option is DEPRECATED and replaced with neighbor_address, this attribute will be removed after 2024-06-01.
advertise dictionary	Advertise to this neighbor
additional_paths dictionary	Advertise additional paths
all boolean	Select all available paths Choices: `false` `true`
best integer	Select best N paths (2-3).
group_best boolean	Select group-best path Choices: `false` `true`
best_external boolean	Advertise best-external (at RRs best-internal) path Choices: `false` `true`
diverse_path dictionary	Advertise additional paths
backup boolean	Diverse path can be backup path Choices: `false` `true`
mpath boolean	Diverse path can be multipath Choices: `false` `true`
advertise_map dictionary	specify route-map for conditional advertisement
exist_map string	advertise prefix only if prefix is in the condition exists condition route-map name
name string	advertise route-map name
non_exist_map string	advertise prefix only if prefix in the condition does not exist condition route-map name
advertisement_interval integer	Minimum interval between sending BGP routing updates
aigp dictionary	AIGP on neighbor
enable boolean	Enable AIGP Choices: `false` `true`
send dictionary	Cost community or MED carrying AIGP VALUE
cost_community dictionary	Cost extended community carrying AIGP Value
id integer	Community ID Please refer vendor documentation for valid values
poi dictionary	Point of Insertion
igp_cost boolean	Point of Insertion After IGP Choices: `false` `true`
pre_bestpath boolean	Point of Insertion At Beginning Choices: `false` `true`
transitive boolean	Cost community is Transitive Choices: `false` `true`
med boolean	Med carrying AIGP Value Choices: `false` `true`
allow_policy boolean	Enable the policy support for this IBGP Neighbor Choices: `false` `true`
allowas_in integer	Accept as-path with my AS present in it
as_override boolean	Override matching AS-number while sending update Maintain Split Horizon while sending update Choices: `false` `true`
bmp_activate dictionary	Activate the BMP monitoring for a BGP peer
all boolean	Activate BMP monitoring for all servers Choices: `false` `true`
server integer	Activate BMP for server BMP Server Number Please refer vendor documentation for valid values
capability dictionary	Advertise capability to the peer Advertise ORF capability to the peer Advertise prefix-list ORF capability to this neighbor
both boolean	Capability to SEND and RECEIVE the ORF to/from this neighbor Choices: `false` `true`
receive boolean	Capability to RECEIVE the ORF from this neighbor Choices: `false` `true`
send boolean	Capability to SEND the ORF to this neighbor Choices: `false` `true`
cluster_id string	Configure Route-Reflector Cluster-id (peers may reset) Route-Reflector Cluster-id as 32 bit quantity, or Route-Reflector Cluster-id in IP address format (A.B.C.D)
default_originate dictionary	Originate default route to this neighbor
route_map string	Route-map to specify criteria to originate default
set boolean	Originate default route to this neighbor Choices: `false` `true`
description string	Neighbor specific description
disable_connected_check boolean	one-hop away EBGP peer using loopback address Choices: `false` `true`
distribute_list dictionary	Filter updates to/from this neighbor
acl string	IP access list number/name
in boolean	Filter incoming updates Choices: `false` `true`
out boolean	Filter outgoing updates Choices: `false` `true`
dmzlink_bw boolean	Propagate the DMZ link bandwidth Choices: `false` `true`
ebgp_multihop dictionary	Allow EBGP neighbors not on directly connected networks
enable boolean	Allow EBGP neighbors not on directly connected networks Choices: `false` `true`
hop_count integer	Maximum hop count Please refer vendor documentation for valid values
fall_over dictionary	Session fall on peer route lost
bfd dictionary	Use BFD to detect failure
multi_hop boolean	Force BFD multi-hop to detect failure Choices: `false` `true`
set boolean	set bfd Choices: `false` `true`
single_hop boolean	Force BFD single-hop to detect failure Choices: `false` `true`
route_map string	Route map for peer route
filter_list dictionary	Establish BGP filters
in boolean	Filter incoming updates Choices: `false` `true`
out boolean	Filter outgoing updates Choices: `false` `true`
path_acl string	AS path access list
ha_mode dictionary	high availability mode
disable boolean	disable graceful-restart Choices: `false` `true`
set boolean	set ha-mode and graceful-restart for this peer Choices: `false` `true`
inherit string	Inherit a template Inherit a peer-session template and Template name
ipv6_adddress string	Neighbor ipv6 address (X:X:X:X::X) This option is DEPRECATED and replaced with neighbor_address, this attribute will be removed after 2024-06-01.
local_as dictionary	Specify a local-as number
dual_as boolean	Accept either real AS or local AS from the ebgp peer Choices: `false` `true`
no_prepend dictionary	Do not prepend local-as to updates from ebgp peers
replace_as boolean	Replace real AS with local AS in the EBGP updates Choices: `false` `true`
set boolean	Set prepend Choices: `false` `true`
number integer	AS number used as local AS Please refer vendor documentation for valid values
set boolean	set local-as number Choices: `false` `true`
log_neighbor_changes dictionary	Log neighbor up/down and reset reason
disable boolean	disable Log neighbor up/down and reset Choices: `false` `true`
set boolean	set Log neighbor up/down and reset Choices: `false` `true`
maximum_prefix dictionary	Maximum number of prefixes accepted from this peer
max_no integer	maximum no. of prefix limit
restart integer	Restart bgp connection after limit is exceeded
threshold_val integer	Threshold value (%) at which to generate a warning msg
warning_only boolean	Only give warning message when limit is exceeded Choices: `false` `true`
neighbor_address string	Neighbor address (A.B.C.D) Neighbor tag Neighbor ipv6 address (X:X:X:X::X)
next_hop_self dictionary	Disable the next hop calculation for this neighbor
all boolean	Enable next-hop-self for both eBGP and iBGP received paths Choices: `false` `true`
set boolean	Enable next-hop-self Choices: `false` `true`
next_hop_unchanged dictionary	Propagate next hop unchanged for iBGP paths to this neighbor Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor
allpaths boolean	Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor Choices: `false` `true`
set boolean	Enable next-hop-unchanged Choices: `false` `true`
password string	Set a password This option is DEPRECATED and is replaced with password_options which accepts dict as input, this attribute will be removed after 2024-06-01.
password_options dictionary	Set a password with encryption type
encryption integer	Encryption type (0 to disable encryption, 7 for proprietary)
pass_key string	The password
path_attribute dictionary	BGP optional attribute filtering
discard dictionary	Discard matching path-attribute for this neighbor
in boolean	Perform inbound path-attribute filtering Choices: `false` `true`
range dictionary	path attribute range
end integer	path attribute range end value Please refer vendor documentation for valid values
start integer	path attribute range start value Please refer vendor documentation for valid values
type integer	path attribute type Please refer vendor documentation for valid values
treat_as_withdraw dictionary	Treat-as-withdraw matching path-attribute for this neighbor
in boolean	Perform inbound path-attribute filtering Choices: `false` `true`
range dictionary	path attribute range
end integer	path attribute range end value Please refer vendor documentation for valid values
start integer	path attribute range start value Please refer vendor documentation for valid values
type integer	path attribute type Please refer vendor documentation for valid values
peer_group string	Member of the peer-group
remote_as string	Specify a BGP neighbor AS of remote neighbor
remove_private_as dictionary	Remove private AS number from outbound updates
all boolean	Remove all private AS numbers Choices: `false` `true`
replace_as boolean	Replace all private AS numbers with local AS Choices: `false` `true`
set boolean	Remove private AS number Choices: `false` `true`
route_map dictionary	Apply route map to neighbor This option is DEPRECATED and is replaced with route_maps which accepts list of dict as input, this attribute will be removed after 2024-06-01.
in boolean	Apply map to incoming routes Choices: `false` `true`
name string	Replace all private AS numbers with local AS
out boolean	Apply map to outbound routes Choices: `false` `true`
route_maps list / elements=dictionary	Apply a list of route maps to neighbor
in boolean	Apply map to incoming routes Choices: `false` `true`
name string	Replace all private AS numbers with local AS
out boolean	Apply map to outbound routes Choices: `false` `true`
route_reflector_client boolean	Configure a neighbor as Route Reflector client Choices: `false` `true`
route_server_client dictionary	Configure a neighbor as Route Server client
context string	Specify Route Server context for neighbor Route Server context name
set boolean	Set Route Server client Choices: `false` `true`
send_community dictionary	Send Community attribute to this neighbor
both boolean	Send Standard and Extended Community attributes Choices: `false` `true`
extended boolean	Send Extended Community attribute Choices: `false` `true`
set boolean	Set send Community attribute to this neighbor Choices: `false` `true`
standard boolean	Send Standard Community attribute Choices: `false` `true`
send_label dictionary	Send NLRI + MPLS Label to this peer
explicit_null boolean	Advertise Explicit Null label in place of Implicit Null Choices: `false` `true`
set boolean	Set send NLRI + MPLS Label to this peer Choices: `false` `true`
shutdown dictionary	Administratively shut down this neighbor
community integer	Set Community for Gshut routes
graceful integer	Gracefully shut down this neighbor time in seconds Please refer vendor documentation for valid values
local_preference boolean	Set Local Preference for Gshut routes Choices: `false` `true`
set boolean	shut down Choices: `false` `true`
slow_peer dictionary	Configure slow-peer
detection dictionary	Configure slow-peer
disable boolean	Disable slow-peer detection Choices: `false` `true`
enable boolean	Enable slow-peer detection Choices: `false` `true`
threshold integer	Set the slow-peer detection threshold
split_update_group dictionary	Configure slow-peer split-update-group
dynamic dictionary	Dynamically split the slow peer to slow-update group
disable boolean	Disable slow-peer detection Choices: `false` `true`
enable boolean	Enable slow-peer detection Choices: `false` `true`
permanent boolean	Keep the slow-peer permanently in slow-update group Choices: `false` `true`
static boolean	Static slow-peer Choices: `false` `true`
soft_reconfiguration boolean	Per neighbor soft reconfiguration Allow inbound soft reconfiguration for this neighbor Choices: `false` `true`
tag string	Neighbor tag This option is DEPRECATED and replaced with neighbor_address, this attribute will be removed after 2024-06-01.
timers dictionary	BGP per neighbor timers
holdtime integer	Holdtime
interval integer	Keepalive interval
min_holdtime integer	Minimum hold time from neighbor
translate_update dictionary	Translate Update to MBGP format
nlri dictionary	Specify type of nlri to translate to
multicast boolean	Translate Update to multicast nlri Choices: `false` `true`
unicast boolean	Process Update as unicast nlri Choices: `false` `true`
set boolean	Set Translate Update Choices: `false` `true`
transport dictionary	Transport options
connection_mode dictionary	Specify passive or active connection
active boolean	Actively establish the TCP session Choices: `false` `true`
passive boolean	Passively establish the TCP session Choices: `false` `true`
multi_session boolean	Use Multi-session for transport Choices: `false` `true`
path_mtu_discovery dictionary	Use transport path MTU discovery
disable boolean	disable Choices: `false` `true`
set boolean	Use path MTU discovery Choices: `false` `true`
ttl_security integer	BGP ttl security check maximum number of hops Please refer vendor documentation for valid values
unsuppress_map string	Route-map to selectively un-suppress suppressed routes Name of route map
update_source string	Source of routing updates
version integer	Set the BGP version to match a neighbor Neighbor’s BGP version Please refer vendor documentation for valid values
weight integer	Set default weight for routes from this neighbor
networks list / elements=dictionary	Specify a network to announce via BGP
address string	Specify network address
backdoor boolean	Specify a BGP backdoor route Choices: `false` `true`
netmask string	Specify network mask
route_map string	Route-map to modify the attributes
redistribute list / elements=dictionary	Redistribute information from another routing protocol
application dictionary	Application
metric integer	Metric for redistributed routes
name string	Application name
route_map string	Route map reference
bgp dictionary	Border Gateway Protocol (BGP)
as_number string	Autonomous system number
metric integer	Metric for redistributed routes
route_map string	Route map reference
connected dictionary	Connected
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
eigrp dictionary	Enhanced Interior Gateway Routing Protocol (EIGRP)
as_number string	Autonomous system number
metric integer	Metric for redistributed routes
route_map string	Route map reference
isis dictionary	ISO IS-IS
area_tag string	ISO routing area tag
clns boolean	Redistribution of OSI dynamic routes Choices: `false` `true`
ip boolean	Redistribution of IP dynamic routes Choices: `false` `true`
metric integer	Metric for redistributed routes
route_map string	Route map reference
iso_igrp dictionary	IGRP for OSI networks
area_tag string	ISO routing area tag
route_map string	Route map reference
lisp dictionary	Locator ID Separation Protocol (LISP)
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
mobile dictionary	Mobile routes
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
odr dictionary	On Demand stub Routes
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
ospf dictionary	Open Shortest Path First (OSPF)
match dictionary	On Demand stub Routes
external boolean	Redistribute OSPF external routes Choices: `false` `true`
internal boolean	Redistribute OSPF internal routes Choices: `false` `true`
nssa_external boolean	Redistribute OSPF NSSA external routes Choices: `false` `true`
type_1 boolean	Redistribute NSSA external type 1 routes Choices: `false` `true`
type_2 boolean	Redistribute NSSA external type 2 routes Choices: `false` `true`
metric integer	Metric for redistributed routes
process_id integer	Process ID
route_map string	Route map reference
vrf string	VPN Routing/Forwarding Instance
ospfv3 dictionary	OSPFv3
match dictionary	On Demand stub Routes
external boolean	Redistribute OSPF external routes Choices: `false` `true`
internal boolean	Redistribute OSPF internal routes Choices: `false` `true`
nssa_external boolean	Redistribute OSPF NSSA external routes Choices: `false` `true`
type_1 boolean	Redistribute NSSA external type 1 routes Choices: `false` `true`
type_2 boolean	Redistribute NSSA external type 2 routes Choices: `false` `true`
metric integer	Metric for redistributed routes
process_id integer	Process ID
route_map string	Route map reference
rip dictionary	Routing Information Protocol (RIP)
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
static dictionary	Static routes
clns boolean	Redistribution of OSI static routes Choices: `false` `true`
ip boolean	Redistribution of IP static routes Choices: `false` `true`
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
vrf dictionary	Specify a source VRF
global boolean	global VRF Choices: `false` `true`
name string	Source VRF name
route_server_context dictionary	Enter route server context command mode This option is DEPRECATED as it is out of scope of the module, this attribute will be removed after 2024-06-01.
address_family dictionary	Enter address family command mode
afi string	Address family Choices: `"ipv4"` `"ipv6"`
import_map string	Import matching routes using a route map Name of route map
modifier string	Address Family modifier Choices: `"multicast"` `"unicast"`
description string	Textual description of the router server context
name string	Name of route server context
scope dictionary	Enter scope command mode This option is DEPRECATED as is not valid within the scope of module, this attribute will be removed after 2024-06-01.
global boolean	Global scope Choices: `false` `true`
vrf string	VRF scope VPN Routing/Forwarding instance name
synchronization boolean	Perform IGP synchronization Choices: `false` `true`
table_map dictionary	Map external entry attributes into routing table
filter boolean	Selective route download Choices: `false` `true`
name string	route-map name
template dictionary	Enter template command mode This option is DEPRECATED as is not valid within the scope of module, this attribute will be removed after 2024-06-01.
peer_policy string	Template configuration for policy parameters
peer_session string	Template configuration for session parameters
timers dictionary	Adjust routing timers BGP timers
holdtime integer	Holdtime
keepalive integer	Keepalive interval
min_holdtime integer	Minimum hold time from neighbor
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config \| section ^router bgp. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The module have declaratively similar behavior for replaced and overridden state. The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of command show running-config \| section ^router bgp executed on device. For state parsed active connection to remote host is not required. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"purged"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

Tested against Cisco IOSXE Version 17.3 on CML.
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html
The module examples uses callback plugin (stdout_callback = yaml) to generate task output in yaml format.

Examples 

# Using merged

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp

- name: Merge provided configuration with device configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - compare_routerid: true
        dampening:
          penalty_half_time: 1
          reuse_route_val: 1
          suppress_route_val: 1
          max_suppress: 1
        graceful_shutdown:
          neighbors:
            time: 50
          community: 100
          local_preference: 100
        log_neighbor_changes: true
        nopeerup_delay:
          - post_boot: 10
      networks:
        - address: 192.0.2.3
        - address: 192.0.2.2
      neighbor:
        - address: 192.0.2.1
          description: merge neighbor
          remote_as: 100
          aigp:
            send:
              cost_community:
                id: 100
                poi:
                  igp_cost: true
                  transitive: true
          route_map:
            name: test-route
            out: true
      redistribute:
        - connected:
            metric: 10
      timers:
        keepalive: 100
        holdtime: 200
        min_holdtime: 150
    state: merged

# Task Output:
# ------------
#
# before: {}
# commands:
# - router bgp 65000
# - timers bgp 100 200 150
# - bgp advertise-best-external
# - bgp bestpath compare-routerid
# - bgp dampening 1 1 1 1
# - bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
# - bgp log-neighbor-changes
# - bgp nopeerup-delay post-boot 10
# - network 192.0.2.3
# - network 192.0.2.2
# - neighbor 192.0.2.1 remote-as 100
# - neighbor 192.0.2.1 description merge neighbor
# - neighbor 192.0.2.1 aigp send cost-community 100 poi igp-cost transitive
# - neighbor 192.0.2.1 route-map test-route out
# - redistribute connected metric 10
# after:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       compare_routerid: true
#     dampening:
#       max_suppress: 1
#       penalty_half_time: 1
#       reuse_route_val: 1
#       suppress_route_val: 1
#     graceful_shutdown:
#       community: '100'
#       local_preference: 100
#       neighbors:
#         time: 50
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       post_boot: 10
#   neighbors:
#   - aigp:
#       send:
#         cost_community:
#           id: 100
#           poi:
#             igp_cost: true
#             transitive: true
#     description: merge neighbor
#     neighbor_address: 192.0.2.1
#     remote_as: '100'
#     route_maps:
#     - name: test-route
#       out: true
#   networks:
#   - address: 192.0.2.2
#   - address: 192.0.2.3
#   redistribute:
#   - connected:
#       metric: 10
#       set: true
#   timers:
#     holdtime: 200
#     keepalive: 100
#     min_holdtime: 150

# After state:
# ------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  network 192.0.2.2
#  network 192.0.2.3
#  timers bgp 100 200 150
#  redistribute connected metric 10
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description merge neighbor
#  neighbor 192.0.2.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 192.0.2.1 route-map test-route out

# Using replaced

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  network 192.0.2.2
#  network 192.0.2.3
#  bgp advertise-best-external
#  neighbor 198.0.2.1 remote-as 100
#  neighbor 198.0.2.1 description merge neighbor
#  neighbor 198.0.2.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.0.2.1 route-map test-route out

- name: Replaces device configuration of listed global BGP with provided configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - med:
              confed: true
        log_neighbor_changes: true
        nopeerup_delay:
          - post_boot: 10
            cold_boot: 20
      networks:
        - address: 192.0.2.4
      neighbor:
        - address: 192.0.2.5
          description: replace neighbor
          remote_as: 100
          slow_peer:
            detection:
              disable: true
    state: replaced

# Task Output:
# ------------
#
# before:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       compare_routerid: true
#     dampening:
#       max_suppress: 1
#       penalty_half_time: 1
#       reuse_route_val: 1
#       suppress_route_val: 1
#     graceful_shutdown:
#       community: '100'
#       local_preference: 100
#       neighbors:
#         time: 50
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       post_boot: 10
#   neighbors:
#   - aigp:
#       send:
#         cost_community:
#           id: 100
#           poi:
#             igp_cost: true
#             transitive: true
#     description: merge neighbor
#     neighbor_address: 198.0.2.1
#     remote_as: '100'
#     route_maps:
#     - name: test-route
#       out: true
#   networks:
#   - address: 192.0.2.2
#   - address: 192.0.2.3
#
# commands:
# - router bgp 65000
# - no bgp bestpath compare-routerid
# - bgp bestpath med confed
# - no bgp dampening 1 1 1 1
# - no bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
# - bgp nopeerup-delay cold-boot 20
# - network 192.0.2.4
# - no network 192.0.2.2
# - no network 192.0.2.3
# - neighbor 192.0.2.5 remote-as 100
# - neighbor 192.0.2.5 description replace neighbor
# - neighbor 192.0.2.5 slow-peer detection disable
# - no neighbor 198.0.2.1
# after:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       med:
#         confed: true
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       cold_boot: 20
#       post_boot: 10
#   neighbors:
#   - description: replace neighbor
#     neighbor_address: 192.0.2.5
#     remote_as: '100'
#     slow_peer:
#       detection:
#         disable: true
#   networks:
#   - address: 192.0.2.4

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay cold-boot 20
#  bgp nopeerup-delay post-boot 10
#  bgp bestpath med confed
#  bgp advertise-best-external
#  network 192.0.2.4
#  neighbor 192.0.2.5 remote-as 100
#  neighbor 192.0.2.5 description replace neighbor
#  neighbor 192.0.2.5 slow-peer detection disable

# Using Deleted

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description merge neighbor
#  neighbor 192.0.2.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 192.0.2.1 route-map test-route out

- name: "Delete global BGP (Note: This won't delete the configured global BGP)"
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
    state: deleted

# Task Output:
# ------------
#
# before:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       compare_routerid: true
#     dampening:
#       max_suppress: 1
#       penalty_half_time: 1
#       reuse_route_val: 1
#       suppress_route_val: 1
#     graceful_shutdown:
#       community: '100'
#       local_preference: 100
#       neighbors:
#         time: 50
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       post_boot: 10
#   neighbors:
#   - aigp:
#       send:
#         cost_community:
#           id: 100
#           poi:
#             igp_cost: true
#             transitive: true
#     description: merge neighbor
#     neighbor_address: 192.0.2.1
#     remote_as: '100'
#     route_maps:
#     - name: test-route
#       out: true
# commands:
# - router bgp 65000
# - no bgp advertise-best-external
# - no bgp bestpath compare-routerid
# - no bgp dampening 1 1 1 1
# - no bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
# - no bgp log-neighbor-changes
# - no bgp nopeerup-delay post-boot 10
# - no neighbor 192.0.2.1
# after:
#   as_number: '65000'

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000

# Using Deleted without any config passed

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description merge neighbor
#  neighbor 192.0.2.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 192.0.2.1 route-map test-route out

- name: Delete global BGP without config
  cisco.ios.ios_bgp_global:
    state: deleted

# Task Output:
# ------------
#
# before:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       compare_routerid: true
#     dampening:
#       max_suppress: 1
#       penalty_half_time: 1
#       reuse_route_val: 1
#       suppress_route_val: 1
#     graceful_shutdown:
#       community: '100'
#       local_preference: 100
#       neighbors:
#         time: 50
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       post_boot: 10
#   neighbors:
#   - aigp:
#       send:
#         cost_community:
#           id: 100
#           poi:
#             igp_cost: true
#             transitive: true
#     description: merge neighbor
#     neighbor_address: 192.0.2.1
#     remote_as: '100'
#     route_maps:
#     - name: test-route
#       out: true
# commands:
# - router bgp 65000
# - no bgp advertise-best-external
# - no bgp bestpath compare-routerid
# - no bgp dampening 1 1 1 1
# - no bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
# - no bgp nopeerup-delay post-boot 10
# - no neighbor 198.51.100.1
# after:
#   as_number: '65000'

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000

# Using purged - would delete all configuration

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description merge neighbor
#  neighbor 192.0.2.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 192.0.2.1 route-map test-route out

- name:
    "Delete the configured global BGP (Note: This WILL delete the the configured
    global BGP)"
  cisco.ios.ios_bgp_global:
    state: purged

# Task Output:
# ------------
#
# before:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       compare_routerid: true
#     dampening:
#       max_suppress: 1
#       penalty_half_time: 1
#       reuse_route_val: 1
#       suppress_route_val: 1
#     graceful_shutdown:
#       community: '100'
#       local_preference: 100
#       neighbors:
#         time: 50
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       post_boot: 10
#   neighbors:
#   - aigp:
#       send:
#         cost_community:
#           id: 100
#           poi:
#             igp_cost: true
#             transitive: true
#     description: merge neighbor
#     neighbor_address: 192.0.2.1
#     remote_as: '100'
#     route_maps:
#     - name: test-route
#       out: true
# commands:
#  - no router bgp 65000
# after: {}

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp

# Using gathered

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  network 192.0.2.3
#  timers bgp 100 200 150
#  redistribute connected metric 10
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description merge neighbor
#  neighbor 192.0.2.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 192.0.2.1 route-map test-route out

- name: Gather facts for bgp_global
  cisco.ios.ios_bgp_global:
    config:
    state: gathered

# Task Output:
# ------------
#
# gathered:
#   as_number: '65000'
#   bgp:
#     advertise_best_external: true
#     bestpath_options:
#       compare_routerid: true
#     dampening:
#       max_suppress: 1
#       penalty_half_time: 1
#       reuse_route_val: 1
#       suppress_route_val: 1
#     graceful_shutdown:
#       community: '100'
#       local_preference: 100
#       neighbors:
#         time: 50
#     log_neighbor_changes: true
#     nopeerup_delay_options:
#       post_boot: 10
#   neighbors:
#   - aigp:
#       send:
#         cost_community:
#           id: 100
#           poi:
#             igp_cost: true
#             transitive: true
#     description: merge neighbor
#     neighbor_address: 192.0.2.1
#     remote_as: '100'
#     route_maps:
#     - name: test-route
#       out: true
#   networks:
#   - address: 192.0.2.3
#   redistribute:
#   - connected:
#       metric: 10
#       set: true
#   timers:
#     holdtime: 200
#     keepalive: 100
#     min_holdtime: 150

# Using Rendered

- name: Rendered the provided configuration with the existing running configuration
  cisco.ios.ios_bgp_global:
    config:
      aggregate_addresses:
        - address: 192.0.2.1
          attribute_map: testMap1
          netmask: 255.255.255.0
          summary_only: true
        - address: 192.0.2.2
          as_set: true
          netmask: 255.255.255.0
        - address: 192.0.2.3
          as_set: true
          netmask: 255.255.255.0
      as_number: "65000"
      auto_summary: true
      bgp:
        additional_paths:
          install: true
          receive: true
        aggregate_timer: 0
        always_compare_med: true
        asnotation: true
        bestpath_options:
          aigp: true
          compare_routerid: true
          med:
            confed: true
            missing_as_worst: true
        confederation:
          identifier: "22"
        consistency_checker:
          error_message:
            interval: 10
            set: true
        dampening:
          route_map: routeMap1Test
        deterministic_med: true
        graceful_restart:
          restart_time: 2
          stalepath_time: 22
        graceful_shutdown:
          community: "77"
          local_preference: 230
          vrfs:
            time: 31
        inject_maps:
          - copy_attributes: true
            exist_map_name: Testmap3
            name: map2
          - copy_attributes: true
            exist_map_name: Testmap2
            name: map1
        listen:
          limit: 200
          range:
            host_with_subnet: 192.0.2.1/24
            peer_group: PaulNetworkGroup
        log_neighbor_changes: true
        maxas_limit: 2
        maxcommunity_limit: 3
        maxextcommunity_limit: 3
        nexthop:
          route_map: RouteMap1
          trigger:
            delay: 2
        nopeerup_delay_options:
          cold_boot: 2
          nsf_switchover: 10
          post_boot: 22
          user_initiated: 22
        recursion: true
        redistribute_internal: true
        refresh:
          max_eor_time: 700
          stalepath_time: 800
        router_id:
          vrf: true
        scan_time: 22
        slow_peer:
          detection:
            threshold: 345
          split_update_group:
            dynamic: true
            permanent: true
        sso: true
        suppress_inactive: true
        update_delay: 2
        update_group: true
      bmp:
        buffer_size: 22
        server: 2
      distance:
        bgp:
          routes_external: 2
          routes_internal: 3
          routes_local: 4
        mbgp:
          routes_external: 2
          routes_internal: 3
          routes_local: 5
      distributes:
        - in: true
          prefix: prefixTest
        - gateway: gatewayTest
          out: true
        - acl: "300"
          interface: Loopback0
          out: true
      maximum_paths:
        ibgp: 2
        paths: 2
      maximum_secondary_paths:
        ibgp: 22
        paths: 22
      neighbors:
        - neighbor_address: 192.0.2.10
          remote_as: "64500"
          update_source: Loopback1
        - activate: true
          neighbor_address: 192.0.2.11
          remote_as: "45000"
          send_community:
            extended: true
        - activate: true
          neighbor_address: 192.0.2.12
          remote_as: "45000"
        - neighbor_address: 192.0.2.13
          remote_as: "6553601"
        - advertise:
            diverse_path:
              backup: true
          neighbor_address: 192.0.2.8
          route_reflector_client: true
        - neighbor_address: 192.0.2.9
          remote_as: "64500"
          route_maps:
            - in: true
              name: rmp1
            - in: true
              name: rmp2
          update_source: Loopback0
        - activate: true
          advertise:
            additional_paths:
              group_best: true
          neighbor_address: 2001:DB8::1037
        - neighbor_address: testNebTag
          peer_group: "5"
          soft_reconfiguration: true
          version: 4
      networks:
        - address: 192.0.2.15
          backdoor: true
          netmask: 55.255.255.0
          route_map: mp1
        - address: 192.0.2.16
          backdoor: true
          netmask: 255.255.255.0
          route_map: mp2
        - address: 192.0.2.17
          backdoor: true
          netmask: 255.255.255.0
          route_map: mp2
      redistribute:
        - static:
            metric: 33
            route_map: rmp1
            set: true
        - application:
            metric: 22
            name: app1
        - application:
            metric: 33
            name: app2
            route_map: mp1
        - connected:
            metric: 22
            set: true
        - mobile:
            metric: 211
            set: true
    state: rendered

# Task Output:
# ------------
#
# rendered:
# - router bgp 65000
# - auto-summary
# - bmp buffer-size 22
# - bmp server 2
# - distance bgp 2 3 4
# - distance mbgp 2 3 5
# - maximum-paths 2
# - maximum-paths ibgp 2
# - maximum-secondary-paths 22
# - maximum-secondary-paths ibgp 22
# - bgp additional-paths install receive
# - bgp aggregate-timer 0
# - bgp always-compare-med
# - bgp asnotation dot
# - bgp bestpath aigp ignore
# - bgp bestpath compare-routerid
# - bgp bestpath med confed missing-as-worst
# - bgp confederation identifier 22
# - bgp consistency-checker error-message interval 10
# - bgp dampening route-map routeMap1Test
# - bgp deterministic-med
# - bgp graceful-restart restart-time 2
# - bgp graceful-restart stalepath-time 22
# - bgp graceful-shutdown all vrfs 31 local-preference 230 community 77
# - bgp listen limit 200
# - bgp listen range 192.0.2.1/24 peer-group PaulNetworkGroup
# - bgp log-neighbor-changes
# - bgp maxas-limit 2
# - bgp maxcommunity-limit 3
# - bgp maxextcommunity-limit 3
# - bgp nexthop route-map RouteMap1
# - bgp nexthop trigger delay 2
# - bgp nopeerup-delay cold-boot 2
# - bgp nopeerup-delay post-boot 22
# - bgp nopeerup-delay nsf-switchover 10
# - bgp nopeerup-delay user-initiated 22
# - bgp recursion host
# - bgp redistribute-internal
# - bgp refresh max-eor-time 700
# - bgp refresh stalepath-time 800
# - bgp router-id vrf auto-assign
# - bgp scan-time 22
# - bgp slow-peer detection threshold 345
# - bgp slow-peer split-update-group dynamic permanent
# - bgp sso route-refresh-enable
# - bgp suppress-inactive
# - bgp update-delay 2
# - bgp update-group split as-override
# - bgp inject-map map2 exist-map Testmap3 copy-attributes
# - bgp inject-map map1 exist-map Testmap2 copy-attributes
# - distribute-list prefix prefixTest in
# - distribute-list gateway gatewayTest out
# - distribute-list 300 out Loopback0
# - aggregate-address 192.0.2.1 255.255.255.0 summary-only attribute-map testMap1
# - aggregate-address 192.0.2.2 255.255.255.0 as-set
# - aggregate-address 192.0.2.3 255.255.255.0 as-set
# - network 192.0.2.15 mask 55.255.255.0 route-map mp1 backdoor
# - network 192.0.2.16 mask 255.255.255.0 route-map mp2 backdoor
# - network 192.0.2.17 mask 255.255.255.0 route-map mp2 backdoor
# - neighbor 192.0.2.10 remote-as 64500
# - neighbor 192.0.2.10 update-source Loopback1
# - neighbor 192.0.2.11 remote-as 45000
# - neighbor 192.0.2.11 activate
# - neighbor 192.0.2.11 send-community extended
# - neighbor 192.0.2.12 remote-as 45000
# - neighbor 192.0.2.12 activate
# - neighbor 192.0.2.13 remote-as 6553601
# - neighbor 192.0.2.8 advertise diverse-path backup
# - neighbor 192.0.2.8 route-reflector-client
# - neighbor 192.0.2.9 remote-as 64500
# - neighbor 192.0.2.9 update-source Loopback0
# - neighbor 192.0.2.9 route-map rmp1 in
# - neighbor 192.0.2.9 route-map rmp2 in
# - neighbor 2001:DB8::1037 activate
# - neighbor 2001:DB8::1037 advertise additional-paths group-best
# - neighbor testNebTag peer-group 5
# - neighbor testNebTag soft-reconfiguration inbound
# - neighbor testNebTag version 4
# - redistribute static metric 33 route-map rmp1
# - redistribute application app1 metric 22
# - redistribute application app2 metric 33 route-map mp1
# - redistribute connected metric 22
# - redistribute mobile metric 211

# Using parsed

# File: parsed.cfg
# ----------------
#
# router bgp 65000
#  auto-summary
#  bmp buffer-size 22
#  bmp server 2
#  distance bgp 2 3 4
#  distance mbgp 2 3 5
#  maximum-paths 2
#  maximum-paths ibgp 2
#  maximum-secondary-paths 22
#  maximum-secondary-paths ibgp 22
#  description checking description as line
#  bgp additional-paths install receive
#  bgp aggregate-timer 0
#  bgp always-compare-med
#  bgp asnotation dot
#  bgp bestpath aigp ignore
#  bgp bestpath compare-routerid
#  bgp bestpath med confed missing-as-worst
#  bgp confederation identifier 22
#  bgp consistency-checker error-message interval 10
#  bgp dampening route-map routeMap1Test
#  bgp deterministic-med
#  bgp graceful-restart restart-time 2
#  bgp graceful-restart stalepath-time 22
#  bgp graceful-shutdown all vrfs 31 local-preference 230 community 77
#  bgp listen limit 200
#  bgp listen range 192.0.2.1/24 peer-group PaulNetworkGroup
#  bgp log-neighbor-changes
#  bgp maxas-limit 2
#  bgp maxcommunity-limit 3
#  bgp maxextcommunity-limit 3
#  bgp nexthop route-map RouteMap1
#  bgp nexthop trigger delay 2
#  bgp nopeerup-delay cold-boot 2
#  bgp nopeerup-delay post-boot 22
#  bgp nopeerup-delay nsf-switchover 10
#  bgp nopeerup-delay user-initiated 22
#  bgp recursion host
#  bgp redistribute-internal
#  bgp refresh max-eor-time 700
#  bgp refresh stalepath-time 800
#  bgp router-id vrf auto-assign
#  bgp scan-time 22
#  bgp slow-peer detection threshold 345
#  bgp slow-peer split-update-group dynamic permanent
#  bgp sso route-refresh-enable
#  bgp suppress-inactive
#  bgp update-delay 2
#  bgp update-group split as-override
#  bgp inject-map map2 exist-map Testmap3 copy-attributes
#  bgp inject-map map1 exist-map Testmap2 copy-attributes
#  distribute-list prefix prefixTest in
#  distribute-list gateway gatewayTest out
#  distribute-list 300 out Loopback0
#  aggregate-address 192.0.2.1 255.255.255.0 summary-only attribute-map testMap1
#  aggregate-address 192.0.2.2 255.255.255.0 as-set
#  aggregate-address 192.0.2.3 255.255.255.0 as-set
#  network 192.0.2.15 mask 55.255.255.0 route-map mp1 backdoor
#  network 192.0.2.16 mask 255.255.255.0 route-map mp2 backdoor
#  network 192.0.2.17 mask 255.255.255.0 route-map mp2 backdoor
#  neighbor 192.0.2.8 advertise diverse-path backup
#  neighbor 192.0.2.8 route-reflector-client
#  neighbor 192.0.2.9 remote-as 64500
#  neighbor 192.0.2.9 update-source Loopback0
#  neighbor 192.0.2.9 route-map rmp1 in
#  neighbor 192.0.2.9 route-map rmp2 in
#  neighbor 192.0.2.10 remote-as 64500
#  neighbor 192.0.2.10 update-source Loopback1
#  neighbor 192.0.2.11 remote-as 45000
#  neighbor 192.0.2.11 activate
#  neighbor 192.0.2.11 send-community extended
#  neighbor 192.0.2.12 remote-as 45000
#  neighbor 192.0.2.12 activate
#  neighbor 192.0.2.13 remote-as 6553601
#  neighbor 192.0.2.13 shutdown graceful 10 community 20
#  neighbor 2001:DB8::1037 activate
#  neighbor 2001:DB8::1037 advertise additional-paths group-best
#  neighbor testNebTag peer-group 5
#  neighbor testNebTag soft-reconfiguration inbound
#  neighbor testNebTag version 4
#  redistribute static metric 33 route-map rmp1
#  redistribute application app1 metric 22
#  redistribute application app2 metric 33 route-map mp1
#  redistribute connected metric 22
#  redistribute mobile metric 21

- name: Parse the commands for provided configuration
  cisco.ios.ios_bgp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------
#
# parsed:
#     aggregate_addresses:
#     - address: 192.0.2.1
#       attribute_map: testMap1
#       netmask: 255.255.255.0
#       summary_only: true
#     - address: 192.0.2.2
#       as_set: true
#       netmask: 255.255.255.0
#     - address: 192.0.2.3
#       as_set: true
#       netmask: 255.255.255.0
#     as_number: '65000'
#     auto_summary: true
#     bgp:
#       additional_paths:
#         install: true
#         receive: true
#       aggregate_timer: 0
#       always_compare_med: true
#       asnotation: true
#       bestpath_options:
#         aigp: true
#         compare_routerid: true
#         med:
#           confed: true
#           missing_as_worst: true
#       confederation:
#         identifier: '22'
#       consistency_checker:
#         error_message:
#           interval: 10
#           set: true
#       dampening:
#         route_map: routeMap1Test
#       deterministic_med: true
#       graceful_restart:
#         restart_time: 2
#         stalepath_time: 22
#       graceful_shutdown:
#         community: '77'
#         local_preference: 230
#         vrfs:
#           time: 31
#       inject_maps:
#       - copy_attributes: true
#         exist_map_name: Testmap3
#         name: map2
#       - copy_attributes: true
#         exist_map_name: Testmap2
#         name: map1
#       listen:
#         limit: 200
#         range:
#           host_with_subnet: 192.0.2.1/24
#           peer_group: PaulNetworkGroup
#       log_neighbor_changes: true
#       maxas_limit: 2
#       maxcommunity_limit: 3
#       maxextcommunity_limit: 3
#       nexthop:
#         route_map: RouteMap1
#         trigger:
#           delay: 2
#       nopeerup_delay_options:
#         cold_boot: 2
#         nsf_switchover: 10
#         post_boot: 22
#         user_initiated: 22
#       recursion: true
#       redistribute_internal: true
#       refresh:
#         max_eor_time: 700
#         stalepath_time: 800
#       router_id:
#         vrf: true
#       scan_time: 22
#       slow_peer:
#         detection:
#           threshold: 345
#         split_update_group:
#           dynamic: true
#           permanent: true
#       sso: true
#       suppress_inactive: true
#       update_delay: 2
#       update_group: true
#     bmp:
#       buffer_size: 22
#       server: 2
#     distance:
#       bgp:
#         routes_external: 2
#         routes_internal: 3
#         routes_local: 4
#       mbgp:
#         routes_external: 2
#         routes_internal: 3
#         routes_local: 5
#     distributes:
#     - in: true
#       prefix: prefixTest
#     - gateway: gatewayTest
#       out: true
#     - acl: '300'
#       interface: Loopback0
#       out: true
#     maximum_paths:
#       ibgp: 2
#       paths: 2
#     maximum_secondary_paths:
#       ibgp: 22
#       paths: 22
#     neighbors:
#     - neighbor_address: 192.0.2.10
#       remote_as: '64500'
#       update_source: Loopback1
#     - activate: true
#       neighbor_address: 192.0.2.11
#       remote_as: '45000'
#       send_community:
#         extended: true
#     - activate: true
#       neighbor_address: 192.0.2.12
#       remote_as: '45000'
#     - neighbor_address: 192.0.2.13
#       remote_as: '6553601'
#     - advertise:
#         diverse_path:
#           backup: true
#       neighbor_address: 192.0.2.8
#       route_reflector_client: true
#     - neighbor_address: 192.0.2.9
#       remote_as: '64500'
#       route_maps:
#       - in: true
#         name: rmp1
#       - in: true
#         name: rmp2
#       update_source: Loopback0
#     - activate: true
#       advertise:
#         additional_paths:
#           group_best: true
#       neighbor_address: 2001:DB8::1037
#     - neighbor_address: testNebTag
#       peer_group: '5'
#       soft_reconfiguration: true
#       version: 4
#     networks:
#     - address: 192.0.2.15
#       backdoor: true
#       netmask: 55.255.255.0
#       route_map: mp1
#     - address: 192.0.2.16
#       backdoor: true
#       netmask: 255.255.255.0
#       route_map: mp2
#     - address: 192.0.2.17
#       backdoor: true
#       netmask: 255.255.255.0
#       route_map: mp2
#     redistribute:
#     - static:
#         metric: 33
#         route_map: rmp1
#         set: true
#     - application:
#         metric: 22
#         name: app1
#     - application:
#         metric: 33
#         name: app2
#         route_map: mp1
#     - connected:
#         metric: 22
#         set: true
#     - mobile:
#         metric: 21
#         set: true

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: `"This output will always be in the same format as the module argspec.\n"`
before dictionary	The configuration prior to the module execution. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `"This output will always be in the same format as the module argspec.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `["router bgp 65000", "neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive", "bgp graceful-shutdown all neighbors 50 local-preference 100 community 100"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["router bgp 65000", "neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive", "bgp graceful-shutdown all neighbors 50 local-preference 100 community 100"]`

Authors

Sumit Jaiswal (@justjais)
Sagar Paul (@KB-perByte)

cisco.ios.ios_bgp_global module – Resource module to configure BGP.

Synopsis

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 

Return Values 