cisco.ios.ios_logging_global module – Resource module to configure logging.

Note

This module is part of the cisco.ios collection (version 5.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_logging_global.

New in cisco.ios 2.2.0

Synopsis

  • This module manages the logging attributes of Cisco IOS network devices

Note

This module has a corresponding action plugin.

Aliases: logging_global

Parameters

Parameter

Comments

config

dictionary

A dictionary of logging options

buffered

dictionary

Set buffered logging parameters

discriminator

string

Establish MD-Buffer association

filtered

boolean

Enable filtered logging

Choices:

  • false

  • true

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

size

integer

Logging buffer size

xml

boolean

Enable logging in XML to XML logging buffer

Choices:

  • false

  • true

buginf

boolean

Enable buginf logging for debugging

Choices:

  • false

  • true

cns_events

string

Set CNS Event logging level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

console

dictionary

Set console logging parameters

discriminator

string

Establish MD-Buffer association

filtered

boolean

Enable filtered logging

Choices:

  • false

  • true

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

  • "guaranteed"

xml

boolean

Enable logging in XML to XML logging buffer

Choices:

  • false

  • true

count

boolean

Count every log message and timestamp last occurrence

Choices:

  • false

  • true

delimiter

dictionary

Append delimiter to syslog messages

tcp

boolean

Append delimiter to syslog messages over TCP

Choices:

  • false

  • true

discriminator

list / elements=string

Create or modify a message discriminator

dmvpn

dictionary

DMVPN Configuration

rate_limit

integer

rate in messages/minute, default is 600 messages/minute (1-10000)

esm

dictionary

Set ESM filter restrictions

config

boolean

Permit/Deny configuration changes from ESM filters

Choices:

  • false

  • true

exception

integer

Limit size of exception flush output (4096-2147483647)

facility

string

Facility parameter for syslog messages

Choices:

  • "auth"

  • "cron"

  • "daemon"

  • "kern"

  • "local0"

  • "local1"

  • "local2"

  • "local3"

  • "local4"

  • "local5"

  • "local6"

  • "local7"

  • "lpr"

  • "mail"

  • "news"

  • "sys10"

  • "sys11"

  • "sys12"

  • "sys13"

  • "sys14"

  • "sys9"

  • "syslog"

  • "user"

  • "uucp"

filter

list / elements=dictionary

Specify logging filter

args

string

Arguments passed to filter module.

order

integer

Order of filter execution

url

string

Filter Uniform Resource Locator

history

dictionary

Configure syslog history table

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

size

integer

Logging buffer size

hosts

list / elements=dictionary

Set syslog server IP address and parameters

discriminator

string

Establish MD-Buffer association

filtered

boolean

Enable filtered logging

Choices:

  • false

  • true

host

aliases: hostname

string

IP address of the syslog server

ipv6

string

Configure IPv6 syslog server

sequence_num_session

boolean

Include session sequence number tag in syslog message

Choices:

  • false

  • true

session_id

dictionary

Specify syslog message session ID tagging

tag

string

Include hostname in session ID tag

Choices:

  • "hostname"

  • "ipv4"

  • "ipv6"

text

string

Include custom string in session ID tag

stream

integer

This server should only receive messages from a numbered stream

transport

dictionary

Specify the transport protocol (default=UDP)

tcp

dictionary

Transport Control Protocol

audit

boolean

Set this host for IOS firewall audit logging

Choices:

  • false

  • true

discriminator

string

Establish MD-Buffer association

filtered

boolean

Enable filtered logging

Choices:

  • false

  • true

port

integer

Specify the TCP port number (default=601) (1 - 65535)

sequence_num_session

boolean

Include session sequence number tag in syslog message

Choices:

  • false

  • true

session_id

dictionary

Specify syslog message session ID tagging

tag

string

Include hostname in session ID tag

Choices:

  • "hostname"

  • "ipv4"

  • "ipv6"

text

string

Include custom string in session ID tag

stream

integer

This server should only receive messages from a numbered stream

xml

boolean

Enable logging in XML to XML logging buffer

Choices:

  • false

  • true

udp

dictionary

User Datagram Protocol

discriminator

string

Establish MD-Buffer association

filtered

boolean

Enable filtered logging

Choices:

  • false

  • true

port

integer

Specify the UDP port number (default=514) (1 - 65535)

sequence_num_session

boolean

Include session sequence number tag in syslog message

Choices:

  • false

  • true

session_id

dictionary

Specify syslog message session ID tagging

tag

string

Include hostname in session ID tag

Choices:

  • "hostname"

  • "ipv4"

  • "ipv6"

text

string

Include custom string in session ID tag

stream

integer

This server should only receive messages from a numbered stream

xml

boolean

Enable logging in XML to XML logging buffer

Choices:

  • false

  • true

vrf

string

Set VRF option

xml

boolean

Enable logging in XML to XML logging buffer

Choices:

  • false

  • true

logging_on

string

Enable logging to all enabled destinations

Choices:

  • "enable"

  • "disable"

message_counter

list / elements=string

Configure log message to include certain counter value

Choices:

  • "log"

  • "debug"

  • "syslog"

monitor

dictionary

Set terminal line (monitor) logging parameters

discriminator

string

Establish MD-Buffer association

filtered

boolean

Enable filtered logging

Choices:

  • false

  • true

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

xml

boolean

Enable logging in XML to XML logging buffer

Choices:

  • false

  • true

origin_id

dictionary

Add origin ID to syslog messages

tag

string

Include hostname in session ID tag

Choices:

  • "hostname"

  • "ip"

  • "ipv6"

text

string

Include custom string in session ID tag

persistent

dictionary

Set persistent logging parameters

batch

integer

Set batch size for writing to persistent storage (4096-2142715904)

filesize

integer

Set size of individual log files (4096-2142715904)

immediate

boolean

Write log entry to storage immediately (no buffering).

Choices:

  • false

  • true

notify

boolean

Notify when show logging [persistent] is activated.

Choices:

  • false

  • true

protected

boolean

Eliminates manipulation on logging-persistent files.

Choices:

  • false

  • true

size

integer

Set disk space for writing log messages (4096-2142715904)

threshold

integer

Set threshold for logging persistent

url

string

URL to store logging messages

policy_firewall

dictionary

Firewall configuration

rate_limit

integer

(0-3600) value in seconds, default is 30 Sec.

queue_limit

dictionary

Set logger message queue size

esm

integer

(100-2147483647) set new queue size

size

integer

(100-2147483647) set new queue size

trap

integer

(100-2147483647) set new queue size

rate_limit

dictionary

Set messages per second limit

all

boolean

(1-10000) message per second

Choices:

  • false

  • true

console

boolean

(1-10000) message per second

Choices:

  • false

  • true

except_severity

string

Messages of this severity or higher

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

size

integer / required

(1-10000) message per second

reload

dictionary

Set reload logging level

message_limit

integer

Number of messages (1-4294967295)

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

server_arp

boolean

Enable sending ARP requests for syslog servers when first configured

Choices:

  • false

  • true

snmp_trap

list / elements=string

Set syslog level for sending snmp trap

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

source_interface

list / elements=dictionary

Specify interface for source address in logging transactions

interface

string

Interface name with number

vrf

string

VPN Routing/Forwarding instance name

trap

string

Set syslog server logging level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

userinfo

boolean

Enable logging of user info on privileged mode enabling

Choices:

  • false

  • true

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command show running-config | include logging.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

With state replaced, for the listed logging configurations, that are in running-config and can have multiple set of commands but not in the task are negated.

With state overridden, all configurations that are in running-config but not in the task are negated.

Please refer to examples for more details.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

Examples

# Using state: merged

# Before state:
# -------------

# router-ios#show running-config | section logging
# no logging exception
# no logging buffered
# no logging reload
# no logging rate-limit
# no logging console
# no logging monitor
# no logging cns-events
# no logging trap

- name: Apply the provided configuration
  cisco.ios.ios_logging_global:
    config:
      buffered:
        severity: notifications
        size: 5099
        xml: true
      console:
        severity: critical
        xml: true
      facility: local5
      hosts:
        - hostname: 172.16.1.12
        - hostname: 172.16.1.11
          xml: true
        - hostname: 172.16.1.10
          filtered: true
          stream: 10
        - hostname: 172.16.1.13
          transport:
            tcp:
              port: 514
      monitor:
        severity: warnings
      message_counter: log
      snmp_trap:
        - errors
      trap: errors
      userinfo: true
      policy_firewall:
        rate_limit: 10
      logging_on: enable
      exception: 4099
      dmvpn:
        rate_limit: 10
      cns_events: warnings
    state: merged

# Commands Fired:
# ---------------

# "commands": [
#       "logging buffered xml 5099 notifications",
#       "logging cns-events warnings",
#       "logging console xml critical",
#       "logging dmvpn rate-limit 10",
#       "logging exception 4099",
#       "logging facility local5",
#       "logging monitor warnings",
#       "logging on",
#       "logging policy-firewall rate-limit 10",
#       "logging trap errors",
#       "logging userinfo",
#       "logging host 172.16.1.12",
#       "logging host 172.16.1.10 filtered stream 10",
#       "logging host 172.16.1.13 transport tcp port 514",
#       "logging message-counter log",
#       "logging snmp-trap errors",
#       "logging host 172.16.1.11 xml"
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging snmp-trap warnings
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10

# Using state: deleted

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10

- name: Remove all existing configuration
  cisco.ios.ios_logging_global:
    state: deleted

# Commands Fired:
# ---------------

# "commands": [
#       "no logging message-counter log",
#       "no logging snmp-trap errors",
#       "no logging host 172.16.1.13",
#       "no logging host 172.16.1.11",
#       "no logging host 172.16.1.12",
#       "no logging host 172.16.1.10",
#       "no logging exception 4099",
#       "no logging userinfo",
#       "no logging buffered xml 5099 notifications",
#       "no logging console xml critical",
#       "no logging monitor warnings",
#       "no logging cns-events warnings",
#       "no logging policy-firewall rate-limit 10",
#       "no logging dmvpn rate-limit 10",
#       "no logging trap errors",
#       "no logging facility local5"
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# no logging exception
# no logging buffered
# no logging reload
# no logging rate-limit
# no logging console
# no logging monitor
# no logging cns-events
# no logging trap

# Using state: overridden

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered 6000 critical
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local6
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.25 filtered

- name: Override commands with provided configuration
  cisco.ios.ios_logging_global:
    config:
      hosts:
        - hostname: 172.16.1.27
          filtered: true
    state: overridden

# Commands Fired:
# ---------------
# "commands": [
#         "no logging message-counter log",
#         "no logging host 172.16.1.12",
#         "no logging host 172.16.1.10",
#         "no logging host 172.16.1.13",
#         "no logging exception 4099",
#         "no logging userinfo",
#         "no logging console xml critical",
#         "no logging monitor warnings",
#         "no logging cns-events warnings",
#         "no logging policy-firewall rate-limit 10",
#         "no logging dmvpn rate-limit 10",
#         "no logging trap errors",
#         "no logging buffered 6000 critical",
#         "no logging facility local6",
#         "logging host 172.16.1.27 filtered",
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# no logging exception
# no logging buffered
# no logging reload
# no logging rate-limit
# no logging console
# no logging monitor
# no logging cns-events
# no logging trap
# logging host 172.16.1.27 filtered

# Using state: replaced

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10

- name: Replace commands with provided configuration
  cisco.ios.ios_logging_global:
    config:
      buffered:
        severity: alerts
        size: 6025
      facility: local6
      hosts:
        - hostname: 172.16.1.19
        - hostname: 172.16.1.10
          filtered: true
          stream: 15
    state: replaced

# Commands Fired:
# ---------------

# "commands": [
#         "no logging host 172.16.1.13",
#         "no logging host 172.16.1.11",
#         "no logging host 172.16.1.12",
#         "no logging host 172.16.1.10",
#         "logging host 172.16.1.19",
#         "logging host 172.16.1.10 filtered stream 15",
#         "logging buffered 6025 alerts",
#         "logging facility local6"
#     ],

# After state:
# ------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered 6025 alerts
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local6
# logging snmp-trap errors
# logging host 172.16.1.19

# Using state: gathered

# Before state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.25 filtered

- name: Gather listed logging config
  cisco.ios.ios_logging_global:
    state: gathered

# Module Execution Result:
# ------------------------

# "gathered": {
#     "buffered": {
#         "severity": "notifications",
#         "size": 5099,
#         "xml": true
#     },
#     "cns_events": "warnings",
#     "console": {
#         "severity": "critical",
#         "xml": true
#     },
#     "dmvpn": {
#         "rate_limit": 10
#     },
#     "exception": 4099,
#     "facility": "local5",
#     "hosts": [
#         {
#             "hostname": "172.16.1.11",
#             "xml": true
#         },
#         {
#             "hostname": "172.16.1.12"
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.10",
#             "stream": 10
#         },
#         {
#             "hostname": "172.16.1.13",
#             "transport": {
#                 "tcp": {
#                     "port": 514
#                 }
#             }
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.25"
#         }
#     ],
#     "message_counter": [
#         "log"
#     ],
#     "monitor": {
#         "severity": "warnings"
#     },
#     "policy_firewall": {
#         "rate_limit": 10
#     },
#     "snmp_trap": [
#         "errors"
#     ],
#     "trap": "errors",
#     "userinfo": true
# },

# After state:
# -------------

# router-ios#show running-config | section logging
# logging exception 4099
# logging message-counter log
# logging userinfo
# logging buffered xml 5099 notifications
# no logging reload
# no logging rate-limit
# logging console xml critical
# logging monitor warnings
# logging cns-events warnings
# logging policy-firewall rate-limit 10
# logging dmvpn rate-limit 10
# logging trap errors
# logging facility local5
# logging snmp-trap errors
# logging host 172.16.1.13 transport tcp port 514
# logging host 172.16.1.11 xml
# logging host 172.16.1.12
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.25 filtered

# Using state: rendered

- name: Render the commands for provided configuration
  cisco.ios.ios_logging_global:
    config:
      buffered:
        severity: notifications
        size: 5099
        xml: true
      console:
        severity: critical
        xml: true
      facility: local5
      hosts:
        - hostname: 172.16.1.12
        - hostname: 172.16.1.11
          xml: true
        - hostname: 172.16.1.10
          filtered: true
          stream: 10
        - hostname: 172.16.1.13
          transport:
            tcp:
              port: 514
      monitor:
        severity: warnings
      message_counter: log
      snmp_trap: errors
      trap: errors
      userinfo: true
      policy_firewall:
        rate_limit: 10
      logging_on: enable
      exception: 10
      dmvpn:
        rate_limit: 10
      cns_events: warnings
    state: rendered

# Module Execution Result:
# ------------------------

# "rendered": [
#     "logging host 172.16.1.12",
#     "logging host 172.16.1.11 xml",
#     "logging host 172.16.1.10 filtered stream 10",
#     "logging host 172.16.1.13 transport tcp port 514",
#     "logging message-counter log",
#     "logging snmp-trap errors",
#     "logging buffered xml 5099 notifications",
#     "logging console xml critical",
#     "logging facility local5",
#     "logging monitor warnings",
#     "logging trap errors",
#     "logging userinfo",
#     "logging policy-firewall rate-limit 10",
#     "logging on",
#     "logging exception 10",
#     "logging dmvpn rate-limit 10",
#     "logging cns-events warnings"
#     ]

# Using state: parsed

# File: parsed.cfg
# ----------------

# logging on
# logging count
# logging userinfo
# logging trap errors
# logging reload alerts
# logging host 172.16.1.1
# logging exception 4099
# logging history alerts
# logging facility local5
# logging snmp-trap errors
# logging monitor warnings
# logging origin-id hostname
# logging host 172.16.1.11 xml
# logging cns-events warnings
# logging dmvpn rate-limit 10
# logging message-counter log
# logging console xml critical
# logging message-counter debug
# logging persistent batch 4444
# logging host 172.16.1.25 filtered
# logging source-interface GBit1/0
# logging source-interface CTunnel2
# logging policy-firewall rate-limit 10
# logging buffered xml 5099 notifications
# logging rate-limit all 2 except warnings
# logging host 172.16.1.10 filtered stream 10
# logging host 172.16.1.13 transport tcp port 514
# logging discriminator msglog01 severity includes 5
# logging filter tftp://172.16.2.18/ESM/elate.tcl args TESTInst2
# logging filter tftp://172.16.2.14/ESM/escalate.tcl args TESTInst

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_logging_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------

# "parsed": {
#     "buffered": {
#         "severity": "notifications",
#         "size": 5099,
#         "xml": true
#     },
#     "cns_events": "warnings",
#     "console": {
#         "severity": "critical",
#         "xml": true
#     },
#     "count": true,
#     "discriminator": [
#         "msglog01 severity includes 5"
#     ],
#     "dmvpn": {
#         "rate_limit": 10
#     },
#     "exception": 4099,
#     "facility": "local5",
#     "filter": [
#         {
#             "args": "TESTInst2",
#             "url": "tftp://172.16.2.18/ESM/elate.tcl"
#         },
#         {
#             "args": "TESTInst",
#             "url": "tftp://172.16.2.14/ESM/escalate.tcl"
#         }
#     ],
#     "history": {
#         "severity": "alerts"
#     },
#     "hosts": [
#         {
#             "hostname": "172.16.1.1"
#         },
#         {
#             "hostname": "172.16.1.11",
#             "xml": true
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.25"
#         },
#         {
#             "filtered": true,
#             "hostname": "172.16.1.10",
#             "stream": 10
#         },
#         {
#             "hostname": "172.16.1.13",
#             "transport": {
#                 "tcp": {
#                     "port": 514
#                 }
#             }
#         }
#     ],
#     "logging_on": "enable",
#     "message_counter": [
#         "log",
#         "debug"
#     ],
#     "monitor": {
#         "severity": "warnings"
#     },
#     "origin_id": {
#         "tag": "hostname"
#     },
#     "persistent": {
#         "batch": 4444
#     },
#     "policy_firewall": {
#         "rate_limit": 10
#     },
#     "rate_limit": {
#         "all": true,
#         "except_severity": "warnings",
#         "size": 2
#     },
#     "reload": {
#         "severity": "alerts"
#     },
#     "snmp_trap": [
#         "errors"
#     ],
#     "source_interface": [
#         {
#             "interface": "GBit1/0"
#         },
#         {
#             "interface": "CTunnel2"
#         }
#     ],
#     "trap": "errors",
#     "userinfo": true
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["logging on", "logging userinfo", "logging trap errors", "logging host 172.16.1.12", "logging console xml critical", "logging message-counter log", "logging policy-firewall rate-limit 10"]

Authors

  • Sagar Paul (@KB-perByte)