cisco.ios.ios_snmp_server module – Resource module to configure snmp server.

Note

This module is part of the cisco.ios collection (version 5.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_snmp_server.

New in cisco.ios 2.6.0

Synopsis 

This module provides declarative management of SNMP server on Cisco IOS devices.

Note

This module has a corresponding action plugin.

Aliases: snmp_server

Parameters 

Parameter	Comments
config dictionary	A dictionary of SNMP server configuration
accounting dictionary	SNMP Accounting parameters
command string	For SNMP set commands
cache integer	Enable SNMP cache and MIB expiry interval
chassis_id string	String to uniquely identify this chassis (Hexadecimal)
communities list / elements=dictionary	Community name configuration.
acl_v4 string	standard access-list name
acl_v6 string	IPv6 access list name
name string	Community name (default RO)
ro boolean	Only reads are permitted Choices: `false` `true`
rw boolean	Read-write access Choices: `false` `true`
view string	MIB view name
contact string	Text for mib object sysContact
context list / elements=string	Create/Delete a context apart from default
drop dictionary	Silently drop SNMP packets
unknown_user boolean	Silently drop unknown v3 user packets Choices: `false` `true`
vrf_traffic boolean	Silently drop SNMP packets that come on VRF interfaces Choices: `false` `true`
engine_id list / elements=dictionary	Configure a local or remote SNMPv3 engineID
id string	engine ID octet string
local boolean	Local SNMP agent Choices: `false` `true`
remote dictionary	Remote SNMP agent
host string	Hostname or IP address of remote SNMP notification host
udp_port integer	The remote SNMP notification host’s UDP port number.
vrf string	The remote notification host’s VPN routing instance
file_transfer dictionary	File transfer related commands
access_group string	Access control for file transfers
protocol list / elements=string	Access control protocol for file transfers
groups list / elements=dictionary	Define a User Security Model group
acl_v4 string	specify an access-list associated with this group
acl_v6 string	specify an access-list associated with this group
context string	Specify a context to associate with the group
group string	SNMP group for the user
match string	Specify a context name match criteria Choices: `"exact"` `"prefix"`
notify string	View to restrict notifications
read string	View to restrict read access
version string	snmp security group version Choices: `"v1"` `"v3"` `"v2c"`
version_option string	community name to the host. Choices: `"auth"` `"noauth"` `"priv"`
write string	View to restrict write access
hosts list / elements=dictionary	Specify hosts to receive SNMP notifications
community_string string	SNMPv1/v2c community string or SNMPv3 user name
host string	Hostname or IP address of SNMP notification host.
informs boolean	Use SNMP inform messages. Choices: `false` `true`
traps list / elements=string	Use SNMP trap messages
version string	Notification message SNMP version. Choices: `"1"` `"2c"` `"3"`
version_option string	community name to the host. Choices: `"auth"` `"noauth"` `"priv"`
vrf string	Specify the VRF in which the host is configured
if_index boolean	Enable ifindex persistence Choices: `false` `true`
inform dictionary	Configure SNMP Informs options
pending integer	Set number of unacked informs to hold
retries integer	Set retry count for informs
timeout integer	Set timeout for informs
ip dictionary	IP ToS configuration for SNMP traffic
dscp integer	IP DSCP value for SNMP traffic
precedence integer	IP Precedence value for SNMP traffic
location string	Text for mib object sysLocation
manager integer	Modify SNMP manager parameters
packet_size integer	Largest SNMP packet size
password_policy list / elements=dictionary	SNMP v3 users password policy
change integer	Number of Character changes b/w old and new password
digits integer	Number of digits
lower_case integer	Number of lower-case characters
max_len integer	Maximum password length
min_len integer	Minimum password length
policy_name string	Name of the policy
special_char integer	Number of special case character
upper_case integer	Number of upper-case characters
username string	Name of the user
queue_length integer	Message queue length for each TRAP host
source_interface string	Source interface to be used for sending out SNMP notifications.
system_shutdown boolean	Enable use of the SNMP reload command Choices: `false` `true`
trap_source string	Assign an interface for the source address of all traps
trap_timeout integer	Set timeout for TRAP message retransmissions
traps dictionary	Enable SNMP Traps
aaa_server boolean	Enable SNMP AAA Server traps Choices: `false` `true`
auth_framework dictionary	Enable SNMP CISCO-AUTH-FRAMEWORK-MIB traps
enable boolean	Enable/disable auth framework Choices: `false` `true`
sec_violation boolean	Mode sec_violation Choices: `false` `true`
bfd dictionary	Allow SNMP BFD traps
enable boolean	Enable/disable bfd Choices: `false` `true`
session_down boolean	Enable BFD session down traps Choices: `false` `true`
session_up boolean	Enable BFD session up traps Choices: `false` `true`
bgp dictionary	Allow bgp traps
cbgp2 boolean	Enable BGP MIBv2 traps Choices: `false` `true`
enable boolean	Enable/disable bgp traps Choices: `false` `true`
state_changes dictionary	Traps for FSM state changes
all boolean	CISCO specific trap for all fsm state changes Choices: `false` `true`
backward_trans boolean	CISCO specific trap for backward transition Choices: `false` `true`
enable boolean	Enable/disable bgp state_changes traps Choices: `false` `true`
limited boolean	Trap for standard backward transition and established Choices: `false` `true`
threshold dictionary	Mode threshold
prefix boolean	Enable/disable bgp threshold traps Choices: `false` `true`
bridge dictionary	Allow bridge related traps
enable boolean	Enable/disable bridge traps Choices: `false` `true`
newroot boolean	Enable SNMP STP Bridge MIB newroot traps Choices: `false` `true`
topologychange boolean	Enable SNMP STP Bridge MIB topologychange traps Choices: `false` `true`
bulkstat dictionary	Allow Data-Collection-MIB Collection notifications
collection boolean	Enable Data-Collection-MIB Collection notifications Choices: `false` `true`
enable boolean	Enable Data-Collection-MIB Collection and Transfert notifications Choices: `false` `true`
transfer boolean	Enable Data-Collection-MIB Transfer notifications Choices: `false` `true`
call_home dictionary	SNMP CISCO-CALLHOME-MIB traps
enable boolean	Enable SNMP CISCO-CALLHOME-MIB traps Choices: `false` `true`
message_send_fail boolean	Enable SNMP ccmSmtpMsgSendFailNotif notification Choices: `false` `true`
server_fail boolean	Enable SNMP ccmSmtpServerFailNotif notification Choices: `false` `true`
casa boolean	Enable SNMP config casa traps Choices: `false` `true`
cef dictionary	Allow cef related traps
enable boolean	Enable/disable cef traps Choices: `false` `true`
inconsistency boolean	Enable SNMP CEF Inconsistency traps Choices: `false` `true`
peer_fib_state_change boolean	Enable SNMP CEF Peer FIB State change traps Choices: `false` `true`
peer_state_change boolean	Enable SNMP CEF Peer state change traps Choices: `false` `true`
resource_failure boolean	Enable SNMP CEF Resource Failure traps Choices: `false` `true`
cnpd boolean	Enable SNMP cnpd traps Choices: `false` `true`
config boolean	Enable SNMP config traps Choices: `false` `true`
config_copy boolean	Enable SNMP config copy traps Choices: `false` `true`
config_ctid boolean	Enable SNMP config ctid traps Choices: `false` `true`
cpu dictionary	Allow CPU related traps
enable boolean	Enable/disable cpu traps Choices: `false` `true`
threshold boolean	Mode threshold Choices: `false` `true`
dhcp boolean	Enable SNMP dhcp traps Choices: `false` `true`
dlsw dictionary	Allow dlsw related traps
circuit boolean	Enable SNMP dlsw circuit traps Choices: `false` `true`
enable boolean	Enable/disable cef traps Choices: `false` `true`
tconn boolean	Enable SNMP dlsw peer transport connection traps Choices: `false` `true`
eigrp boolean	Enable SNMP eigrp traps Choices: `false` `true`
energywise boolean	Enable SNMP energywise traps Choices: `false` `true`
entity boolean	Enable SNMP entity traps Choices: `false` `true`
entity_diag dictionary	Allow SNMP CISCO-ENTITY-DIAG-MIB traps
boot_up_fail boolean	Enable SNMP ceDiagBootUpFailedNotif traps Choices: `false` `true`
enable boolean	Enable SNMP CISCO-ENTITY-DIAG-MIB traps Choices: `false` `true`
hm_test_recover boolean	Enable SNMP ceDiagHMTestRecoverNotif traps Choices: `false` `true`
hm_thresh_reached boolean	Enable SNMP ceDiagHMThresholdReachedNotif traps Choices: `false` `true`
scheduled_test_fail boolean	Enable SNMP ceDiagScheduledTestFailedNotif traps Choices: `false` `true`
entity_perf dictionary	Allow SNMP CISCO-ENTITY-PERFORMANCE-MIB traps
enable boolean	Enable SNMP CISCO-ENTITY-PERFORMANCE-MIB traps Choices: `false` `true`
throughput_notif boolean	Enable ENTITY PERFORMANCE MIB throughput traps Choices: `false` `true`
entity_state boolean	Enable SNMP ENTITY-STATE-MIB traps Choices: `false` `true`
envmon dictionary	Enable SNMP environmental monitor traps
enable boolean	Enable/disable envmon traps Choices: `false` `true`
fan dictionary	Enable SNMP envmon fan traps This option is DEPRECATED and is replaced with fan_enable which accepts bool as input This attribute will be removed after 2024-09-01
enable boolean	Enable/disable fan traps Choices: `false` `true`
shutdown boolean	Enable SNMP environmental monitor shutdown traps Choices: `false` `true`
status boolean	Enable SNMP environmental status change traps Choices: `false` `true`
supply boolean	Enable SNMP environmental monitor supply traps Choices: `false` `true`
temperature boolean	Enable SNMP environmental monitor temperature traps Choices: `false` `true`
fan_enable boolean	Enable SNMP envmon fan traps Choices: `false` `true`
shutdown boolean	Enable SNMP environmental monitor shutdown traps Choices: `false` `true`
status boolean	Enable SNMP environmental status change traps Choices: `false` `true`
supply boolean	Enable SNMP environmental monitor supply traps Choices: `false` `true`
temperature boolean	Enable SNMP environmental monitor temperature traps Choices: `false` `true`
errdisable boolean	Enable SNMP errdisable notifications Choices: `false` `true`
ether_oam boolean	Enable SNMP ethernet oam traps Choices: `false` `true`
ethernet dictionary	Allow ethernet traps
cfm dictionary	Enable SNMP Ethernet CFM traps
alarm boolean	Enable SNMP Ethernet CFM fault alarm trap Choices: `false` `true`
cc dictionary	Enable SNMP Ethernet CC trap
config boolean	Enable SNMP Ethernet CFM configuration error traps Choices: `false` `true`
cross_connect boolean	Enable SNMP Ethernet CFM cross-connect traps Choices: `false` `true`
loop boolean	Enable SNMP Ethernet CFM loop traps Choices: `false` `true`
mep_down boolean	Enable SNMP Ethernet CFM CC Down traps Choices: `false` `true`
mep_up boolean	Enable SNMP Ethernet CFM CC Up traps Choices: `false` `true`
crosscheck dictionary	Enable SNMP Ethernet CC crosscheck trap
mep_missing boolean	Enable SNMP Ethernet CC crosscheck missing trap Choices: `false` `true`
mep_unknown boolean	Enable SNMP Ethernet CC crosscheck unknown traps Choices: `false` `true`
service_up boolean	Enable SNMP Ethernet CC crosscheck service traps Choices: `false` `true`
evc dictionary	Enable SNMP Ethernet EVC traps
create boolean	Enable SNMP Ethernet EVC create traps Choices: `false` `true`
delete boolean	Enable SNMP Ethernet EVC delete traps Choices: `false` `true`
status boolean	Enable SNMP Ethernet EVC status traps Choices: `false` `true`
event_manager boolean	Enable SNMP event-manager traps Choices: `false` `true`
firewall dictionary	Enable SNMP firewall traps
enable boolean	Enable/disable firewall traps Choices: `false` `true`
serverstatus boolean	Enable firewall server status change trap Choices: `false` `true`
flash dictionary	SNMP FLASH notifications
enable boolean	Enable SNMP FLASH notifications Choices: `false` `true`
insertion boolean	Enable SNMP Flash Insertion notifications Choices: `false` `true`
lowspace boolean	Enable SNMP Flash Low Space notifications Choices: `false` `true`
removal boolean	Enable SNMP Flash Removal notifications Choices: `false` `true`
flex_links dictionary	SNMP FLEX Links traps
enable boolean	Enable SNMP FLEX Links traps Choices: `false` `true`
status boolean	Enable SNMP FLEX Links status change traps Choices: `false` `true`
flowmon boolean	Enable SNMP flowmon traps Choices: `false` `true`
frame_relay dictionary	Allow frame-relay traps
enable boolean	Enable/disable frame-relay traps Choices: `false` `true`
subif dictionary	Enable SNMP frame-relay subinterface traps
count integer	Maximum number of traps sent per interval
enable boolean	Enable/disable subif traps Choices: `false` `true`
interval integer	Interval duration in which to limit the number of traps sent
fru_ctrl boolean	Enable SNMP fru-ctrl traps Choices: `false` `true`
hsrp boolean	Enable SNMP hsrp traps Choices: `false` `true`
ike dictionary	Allow ike traps
policy dictionary	Enable IKE Policy traps
add boolean	Enable IKE Policy add trap Choices: `false` `true`
delete boolean	Enable IKE Policy delete trap Choices: `false` `true`
tunnel dictionary	Enable IKE Tunnel traps
start boolean	Enable IKE Tunnel start trap Choices: `false` `true`
stop boolean	Enable IKE Tunnel stop trap Choices: `false` `true`
ipmulticast boolean	Enable SNMP ip multi cast traps Choices: `false` `true`
ipsec dictionary	Allow ike traps
cryptomap dictionary	Enable IPsec Cryptomap traps
add boolean	Enable IPsec Cryptomap add trap Choices: `false` `true`
attach boolean	Enable IPsec Cryptomap Attach trap Choices: `false` `true`
delete boolean	Enable IPsec Cryptomap delete trap Choices: `false` `true`
detach boolean	Enable IPsec Cryptomap Detach trap Choices: `false` `true`
too_many_sas boolean	Enable IPsec Tunnel Start trap Choices: `false` `true`
tunnel dictionary	Enable IPsec Tunnel traps
start boolean	Enable IPsec Tunnel start trap Choices: `false` `true`
stop boolean	Enable IPsec Tunnel stop trap Choices: `false` `true`
ipsla boolean	Enable SNMP ipsla traps Choices: `false` `true`
isis boolean	Enable SNMP isis traps Choices: `false` `true`
l2tc dictionary	Allow SNMP L2 Tunnel Config traps
enable boolean	Enable SNMP L2 Tunnel Config traps Choices: `false` `true`
sys_threshold boolean	Enable SNMP L2TC System threshold traps Choices: `false` `true`
threshold boolean	Enable SNMP L2 Tunnel Config threshold traps Choices: `false` `true`
l2tun dictionary	Allow SNMP l2tun traps
pseudowire_status boolean	Enable BFD pseudo wire status traps Choices: `false` `true`
session boolean	Enable BFD session traps Choices: `false` `true`
license boolean	Enable license traps Choices: `false` `true`
lisp boolean	Enable SNMP LISP MIB traps Choices: `false` `true`
local_auth boolean	Enable SNMP local auth traps Choices: `false` `true`
mac_notification dictionary	Allow SNMP MAC Notification traps
change boolean	Enable SNMP MAC Change traps Choices: `false` `true`
enable boolean	Enable SNMP MAC Notification traps Choices: `false` `true`
move boolean	Enable SNMP MAC Move traps Choices: `false` `true`
threshold boolean	Enable SNMP MAC Threshold traps Choices: `false` `true`
memory dictionary	Allow MEMORY traps
bufferpeak boolean	Enable SNMP Memory Bufferpeak traps Choices: `false` `true`
enable boolean	Enable MEMORY traps Choices: `false` `true`
mpls dictionary	Enable SNMP mpls traps
fast_reroute dictionary	Allow SNMP MPLS fast reroute traps
enable boolean	Enable SNMP MPLS fast reroute traps Choices: `false` `true`
protected boolean	Enable MPLS fast reroute protection traps Choices: `false` `true`
ldp dictionary	Allow SNMP MPLS label distribution protocol traps
enable boolean	Enable SNMP MPLS label distribution protocol traps Choices: `false` `true`
pv_limit boolean	Enable MPLS LDP path vector limit mismatch traps Choices: `false` `true`
session_down boolean	Enable MPLS LDP session down traps Choices: `false` `true`
session_up boolean	Enable MPLS LDP session up traps Choices: `false` `true`
threshold boolean	Enable MPLS LDP threshold exceeded traps Choices: `false` `true`
rfc dictionary	Enable SNMP MPLS RFC traps
ldp dictionary	Allow SNMP MPLS label distribution protocol RFC traps
enable boolean	Enable SNMP MPLS label distribution protocol RFC traps Choices: `false` `true`
pv_limit boolean	Enable MPLS LDP path vector limit mismatch RFC traps Choices: `false` `true`
session_down boolean	Enable MPLS LDP session down RFC traps Choices: `false` `true`
session_up boolean	Enable MPLS LDP session up RFC traps Choices: `false` `true`
threshold boolean	Enable MPLS LDP threshold exceeded RFC traps Choices: `false` `true`
traffic_eng dictionary	Allow SNMP MPLS traffic engineering RFC traps
down boolean	Enable MPLS TE tunnel down RFC traps Choices: `false` `true`
enable boolean	Enable SNMP MPLS traffic engineering RFC traps Choices: `false` `true`
reoptimized boolean	Enable MPLS TE tunnel reoptimized RFC traps Choices: `false` `true`
reroute boolean	Enable MPLS TE tunnel reroute RFC traps Choices: `false` `true`
up boolean	Enable MPLS TE tunnel up RFC traps Choices: `false` `true`
vpn dictionary	Allow SNMP MPLS Virtual Private Network RFC traps
enable boolean	Enable SNMP MPLS Virtual Private Network RFC traps Choices: `false` `true`
illegal_label boolean	Enable MPLS VPN illegal label threshold exceeded RFC traps Choices: `false` `true`
max_thresh_cleared boolean	Enable MPLS VPN maximum threshold cleared RFC traps Choices: `false` `true`
max_threshold boolean	Enable MPLS VPN maximum threshold exceeded RFC traps Choices: `false` `true`
mid_threshold boolean	Enable MPLS VPN middle threshold exceeded RFC traps Choices: `false` `true`
vrf_down boolean	Enable MPLS VPN vrf down RFC traps Choices: `false` `true`
vrf_up boolean	Enable MPLS VPN vrf up RFC traps Choices: `false` `true`
traffic_eng dictionary	Allow SNMP MPLS traffic engineering traps
down boolean	Enable MPLS TE tunnel down traps Choices: `false` `true`
enable boolean	Enable SNMP MPLS traffic engineering traps Choices: `false` `true`
reroute boolean	Enable MPLS TE tunnel reroute traps Choices: `false` `true`
up boolean	Enable MPLS TE tunnel up traps Choices: `false` `true`
vpn dictionary	Allow SNMP MPLS Virtual Private Network traps
enable boolean	Enable SNMP MPLS Virtual Private Network traps Choices: `false` `true`
illegal_label boolean	Enable MPLS VPN illegal label threshold exceeded traps Choices: `false` `true`
max_thresh_cleared boolean	Enable MPLS VPN maximum threshold cleared traps Choices: `false` `true`
max_threshold boolean	Enable MPLS VPN maximum threshold exceeded traps Choices: `false` `true`
mid_threshold boolean	Enable MPLS VPN middle threshold exceeded traps Choices: `false` `true`
vrf_down boolean	Enable MPLS VPN vrf down traps Choices: `false` `true`
vrf_up boolean	Enable MPLS VPN vrf up traps Choices: `false` `true`
mpls_vpn boolean	Enable SNMP mpls traps This option is DEPRECATED and is replaced with mpls which accepts dict as input This attribute will be removed after 2024-09-01 Choices: `false` `true`
msdp boolean	Enable SNMP msdp traps Choices: `false` `true`
mvpn boolean	Enable SNMP mvpn traps Choices: `false` `true`
nhrp dictionary	Allow SNMP NHRP traps
enable boolean	Enable SNMP NHRP traps Choices: `false` `true`
nhc dictionary	Allow Next Hop Client traps
down boolean	Enable Next Hop Client down trap Choices: `false` `true`
enable boolean	Enable Next Hop Client traps Choices: `false` `true`
up boolean	Enable Next Hop Client up trap Choices: `false` `true`
nhp dictionary	Allow Next Hop Peer traps
down boolean	Enable Next Hop Peer down trap Choices: `false` `true`
enable boolean	Enable Next Hop Peer traps Choices: `false` `true`
up boolean	Enable Next Hop Peer up trap Choices: `false` `true`
nhs dictionary	Allow Next Hop Server traps
down boolean	Enable Next Hop Server down trap Choices: `false` `true`
enable boolean	Enable Next Hop Server traps Choices: `false` `true`
up boolean	Enable Next Hop Server up trap Choices: `false` `true`
quota_exceeded boolean	Enable quota-exceeded trap Choices: `false` `true`
ospf dictionary	Allow ospf related traps
cisco_specific dictionary	Cisco specific traps
error boolean	error traps Choices: `false` `true`
lsa boolean	Lsa related traps Choices: `false` `true`
retransmit boolean	Packet retransmit traps Choices: `false` `true`
state_change dictionary	state change traps
nssa_trans_change boolean	Nssa translator state changes Choices: `false` `true`
shamlink dictionary	Config mismatch errors on virtual interfaces
interface boolean	Sham link interface state changes Choices: `false` `true`
neighbor boolean	Sham link neighbor state changes Choices: `false` `true`
error boolean	Enable error traps Choices: `false` `true`
lsa boolean	Enable/disable ospf lsa traps Choices: `false` `true`
retransmit boolean	Enable/disable ospf retransmit traps Choices: `false` `true`
state_change boolean	Enable/disable state change traps Choices: `false` `true`
ospfv3 dictionary	Allow OSPFv3 related traps
errors dictionary	Error traps
bad_packet boolean	Packet parse failure on non-virtual interfaces Choices: `false` `true`
config_error boolean	Config mismatch errors on non-virtual interfaces Choices: `false` `true`
enable boolean	Enable Error traps Choices: `false` `true`
virt_bad_packet boolean	Packet parse failure on virtual interfaces Choices: `false` `true`
virt_config_error boolean	Config mismatch errors on virtual interfaces Choices: `false` `true`
rate_limit integer	Trap rate limit values Rate limit window size in seconds (between 2 and 60)
state_change dictionary	State change traps
enable boolean	Enable State change traps Choices: `false` `true`
if_state_change boolean	Non_virtual interface state changes Choices: `false` `true`
neighbor_restart_helper_status_change boolean	Neighbor graceful restart helper status changes Choices: `false` `true`
neighbor_state_change boolean	Non_virtual neighbor state changes Choices: `false` `true`
nssa_translator_status_change boolean	NSSA translator status changes Choices: `false` `true`
restart_status_change boolean	Graceful restart status changes Choices: `false` `true`
virtif_state_change boolean	Virtual interface state changes Choices: `false` `true`
vn_restart_helper_status_change boolean	Virtual neighbor graceful restart helper status changes Choices: `false` `true`
vn_state_change boolean	Virtual neighbor state changes Choices: `false` `true`
pim dictionary	Allow PIM traps
enable boolean	Enable/disable PIM traps Choices: `false` `true`
invalid_pim_message boolean	Enable invalid pim message trap Choices: `false` `true`
neighbor_change boolean	Enable neighbor change trap Choices: `false` `true`
rp_mapping_change boolean	Enable rp mapping change trap Choices: `false` `true`
pki boolean	Enable SNMP pki traps Choices: `false` `true`
port_security boolean	Enable SNMP port security traps Choices: `false` `true`
power_ethernet dictionary	Allow SNMP power ethernet traps
enable boolean	Enable SNMP power ethernet traps Choices: `false` `true`
group list / elements=dictionary	Enable SNMP inline power group based traps.
slot_id integer	An integer between 1 and 20 (physical slot number)
threshold integer	Threshold level for this slot
police boolean	Enable Policing Trap Choices: `false` `true`
pw_vc boolean	Enable SNMP pw vc traps Choices: `false` `true`
rep boolean	Enable SNMP Resilient Ethernet Protocol Traps Choices: `false` `true`
rf boolean	Enable all SNMP traps defined in CISCO-RF-MIB Choices: `false` `true`
rsvp boolean	Enable SNMP RSVP traps Choices: `false` `true`
smart_license dictionary	Allow smart license traps
enable boolean	Enable smart license traps Choices: `false` `true`
entitlement boolean	Enable Entitlement Notification trap Choices: `false` `true`
global boolean	Enable Global Notification traps Choices: `false` `true`
snmp dictionary	Enable SNMP traps
authentication boolean	Enable authentication trap Choices: `false` `true`
coldstart boolean	Enable coldStart trap Choices: `false` `true`
linkdown boolean	Enable linkDown trap Choices: `false` `true`
linkup boolean	Enable linkUp trap Choices: `false` `true`
warmstart boolean	Enable warmStart trap Choices: `false` `true`
stackwise boolean	Enable SNMP stackwise traps Choices: `false` `true`
stpx dictionary	Allow SNMP STPX MIB traps
enable boolean	Enable SNMP STPX MIB traps Choices: `false` `true`
inconsistency boolean	Enable SNMP STPX MIB InconsistencyUpdate traps Choices: `false` `true`
loop_inconsistency boolean	Enable SNMP STPX MIB LoopInconsistencyUpdate traps Choices: `false` `true`
root_inconsistency boolean	Enable SNMP STPX MIB RootInconsistencyUpdate traps Choices: `false` `true`
syslog boolean	Enable SNMP syslog traps Choices: `false` `true`
transceiver_all boolean	Enable SNMP transceiver traps Choices: `false` `true`
trustsec dictionary	Allow SNMP CISCO-TRUSTSEC-MIB traps
authz_file_error boolean	Enable ctsAuthzCacheFileErrNotif notifications Choices: `false` `true`
cache_file_error boolean	Enable ctsCacheFileAccessErrNotif notifications Choices: `false` `true`
enable boolean	Enable SNMP CISCO-TRUSTSEC-MIB traps Choices: `false` `true`
keystore_file_error boolean	Enable ctsSwKeystoreFileErrNotif notifications Choices: `false` `true`
keystore_sync_fail boolean	Enable ctsSwKeystoreSyncFailNotif notifications Choices: `false` `true`
random_number_fail boolean	Enable ctsSapRandonNumberFailNotif notifications Choices: `false` `true`
src_entropy_fail boolean	Enable ctsSrcEntropyFailNotif notifications Choices: `false` `true`
trustsec_interface dictionary	Allow SNMP CISCO-TRUSTSEC-INTERFACE-MIB traps
authc_fail boolean	Enable ctsiIfAuthenticationFailNotif trap Choices: `false` `true`
authz_fail boolean	Enable ctsiAuthorizationFailNotif trap Choices: `false` `true`
enable boolean	Enable SNMP CISCO-TRUSTSEC-INTERFACE-MIB traps Choices: `false` `true`
sap_fail boolean	Enable ctsiIfSapNegotiationFailNotif trap Choices: `false` `true`
supplicant_fail boolean	Enable ctsiIfAddSupplicantFailNotif trap Choices: `false` `true`
unauthorized boolean	Enable ctsiIfUnauthorizedNotifEnable trap Choices: `false` `true`
trustsec_policy dictionary	Allow SNMP CISCO-TRUSTSEC-POLICY-MIB traps
authz_sgacl_fail boolean	Enable ctspAuthorizationSgaclFailNotif notifications Choices: `false` `true`
enable boolean	Enable SNMP CISCO-TRUSTSEC-POLICY-MIB traps Choices: `false` `true`
peer_policy_updated boolean	Enable ctspPeerPolicyUpdatedNotif notifications Choices: `false` `true`
trustsec_server dictionary	Allow SNMP CISCO-TRUSTSEC-SERVER-MIB traps
enable boolean	Enable SNMP CISCO-TRUSTSEC-SERVER-MIB traps Choices: `false` `true`
provision_secret boolean	Enable ctsvNoProvisionSecretNotif notification Choices: `false` `true`
radius_server boolean	Enable ctsvNoRadiusServerNotif notification Choices: `false` `true`
trustsec_sxp dictionary	Allow SNMP CISCO-TRUSTSEC-SXP-MIB traps
binding_conflict boolean	Enable ctsxSxpBindingConflictNotif notifications Choices: `false` `true`
binding_err boolean	Enable ctsxSxpBindingErrNotif notifications Choices: `false` `true`
binding_expn_fail boolean	Enable ctsxSxpBindingExpnFailNotif notifications Choices: `false` `true`
conn_config_err boolean	Enable ctsxSxpConnConfigErrNotif notifications Choices: `false` `true`
conn_down boolean	Enable ctsxSxpConnDownNotif notifications Choices: `false` `true`
conn_srcaddr_err boolean	Enable ctsxSxpConnSourceAddrErrNotif notifications Choices: `false` `true`
conn_up boolean	Enable ctsxSxpConnUpNotif notifications Choices: `false` `true`
enable boolean	Enable SNMP CISCO-TRUSTSEC-SXP-MIB traps Choices: `false` `true`
msg_parse_err boolean	Enable ctsxSxpMsgParseErrNotif notifications Choices: `false` `true`
oper_nodeid_change boolean	Enable ctsxSxpOperNodeIdChangeNotif notifications Choices: `false` `true`
tty boolean	Enable SNMP tty TCP connection traps Choices: `false` `true`
udld dictionary	Allow SNMP CISCO-UDLDP-MIB traps
enable boolean	Enable SNMP CISCO-UDLDP-MIB traps Choices: `false` `true`
link_fail_rpt boolean	Enable SNMP cudldpFastHelloLinkFailRptNotification traps Choices: `false` `true`
status_change boolean	Enable SNMP cudldpFastHelloStatusChangeNotification traps Choices: `false` `true`
vlan_membership boolean	Enable SNMP VLAN membership traps Choices: `false` `true`
vlancreate boolean	Enable SNMP VLAN created traps Choices: `false` `true`
vlandelete boolean	Enable SNMP VLAN deleted traps Choices: `false` `true`
vrfmib dictionary	Allow vrfmib traps
vnet_trunk_down boolean	Enable vnet-trunk-down traps Choices: `false` `true`
vnet_trunk_up boolean	Enable vnet-trunk-up trap Choices: `false` `true`
vrf_down boolean	Enable vrf-down trap Choices: `false` `true`
vrf_up boolean	Enable vrf-up trap Choices: `false` `true`
vrrp boolean	Enable SNMP vrrp traps Choices: `false` `true`
vswitch dictionary	Allow SNMP Virtual Switch notifications
dual_active boolean	Enable SNMP Virtual Switch (Dual Active) notification Choices: `false` `true`
enable boolean	Enable SNMP Virtual Switch notifications Choices: `false` `true`
vsl boolean	Enable SNMP Virtual Switch Link (VSL) notification Choices: `false` `true`
vtp boolean	Enable SNMP VTP traps Choices: `false` `true`
users list / elements=dictionary	Define a user who can access the SNMP engine
acl_v4 string	Access list ipv4 associated
acl_v6 string	Access list ipv6 associated
authentication dictionary	Authentication parameters for the user. Effects idempotency of module as configuration applied is not reflected in running-config.
algorithm string	Select algorithm for authentication. Choices: `"md5"` `"sha"`
password string	Authentication password for user.
encryption dictionary	Encryption parameters for the user. Effects idempotency of module as configuration applied is not reflected in running-config.
password string	Authentication password for user.
priv string	Select algorithm for encryption. Choices: `"3des"` `"aes"` `"des"`
priv_option string	Add extra option for specific priv if any.
group string	SNMP group for the user.
remote string	System where an SNMPv3 user is hosted
udp_port integer	UDP port used by the remote SNMP system
username string	SNMP user name
version string	SNMP security version Choices: `"v1"` `"v2c"` `"v3"`
version_option string	Enable encrypted version option. Choices: `"encrypted"`
vrf string	The remote SNMP entity’s VPN Routing instance
views list / elements=dictionary	Define an SNMPv2 MIB view
excluded boolean	MIB family is excluded from the view Choices: `false` `true`
family_name string	MIB view family name
included boolean	MIB family is included in the view Choices: `false` `true`
name string	Name of the view
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command show running-config \| include snmp-server. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Refer to examples for more details. The states replaced and overridden have identical behaviour for this module. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"parsed"` `"gathered"` `"rendered"`

Notes 

Note

Tested against Cisco IOSXE Version 17.3 on CML.
This module works with connection network_cli.

Examples 

# Using state: merged

# Before state:
# -------------

# router-ios#show running-config | section ^snmp-server
# --------------------- EMPTY -----------------

# Merged play:
# ------------

- name: Apply the provided configuration
  cisco.ios.ios_snmp_server:
    config:
      communities:
        - acl_v4: testACL
          name: mergedComm
          rw: true
      contact: contact updated using merged
      engine_id:
        - id: AB0C5342FF0F
          remote:
            host: 172.16.0.12
            udp_port: 25
      groups:
        - group: mergedGroup
          version: v3
          version_option: auth
      file_transfer:
        access_group: test
        protocol:
          - ftp
      hosts:
        - community_string: mergedComm
          host: 172.16.2.9
          informs: true
          traps:
            - msdp
            - stun
            - pki
          version: 2c
        - community_string: mergedComm
          host: 172.16.2.9
          traps:
            - slb
            - pki
      password_policy:
        - change: 3
          digits: 23
          lower_case: 12
          max_len: 24
          policy_name: MergedPolicy
          special_char: 32
          upper_case: 12
        - change: 43
          min_len: 12
          policy_name: MergedPolicy2
          special_char: 22
          upper_case: 12
        - change: 11
          digits: 23
          max_len: 12
          min_len: 12
          policy_name: policy3
          special_char: 22
          upper_case: 12
      traps:
        cef:
          enable: true
          inconsistency: true
          peer_fib_state_change: true
          peer_state_change: true
          resource_failure: true
        msdp: true
        ospf:
          cisco_specific:
            error: true
            lsa: true
            retransmit: true
            state_change:
              nssa_trans_change: true
              shamlink:
                interface: true
                neighbor: true
          error: true
          lsa: true
          retransmit: true
          state_change: true
        syslog: true
        tty: true
      users:
        - acl_v4: "24"
          group: dev
          username: userPaul
          version: v1
    state: merged

# Commands Fired:
# ---------------

# "commands": [
#         "snmp-server contact contact updated using merged",
#         "snmp-server file-transfer access-group test protocol ftp",
#         "snmp-server enable traps msdp",
#         "snmp-server enable traps syslog",
#         "snmp-server enable traps tty",
#         "snmp-server enable traps ospf cisco-specific errors",
#         "snmp-server enable traps ospf cisco-specific retransmit",
#         "snmp-server enable traps ospf cisco-specific lsa",
#         "snmp-server enable traps ospf cisco-specific state-change nssa-trans-change",
#         "snmp-server enable traps ospf cisco-specific state-change shamlink interface",
#         "snmp-server enable traps ospf cisco-specific state-change shamlink neighbor",
#         "snmp-server enable traps ospf errors",
#         "snmp-server enable traps ospf retransmit",
#         "snmp-server enable traps ospf lsa",
#         "snmp-server enable traps ospf state-change",
#         "snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency",
#         "snmp-server host 172.16.2.9 informs version 2c mergedComm msdp stun pki",
#         "snmp-server host 172.16.2.9 mergedComm slb pki",
#         "snmp-server group mergedGroup v3 auth",
#         "snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F",
#         "snmp-server community mergedComm rw testACL",
#         "snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3",
#         "snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43",
#         "snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11",
#         "snmp-server user userPaul dev v1 access 24"
# ],

# After state:
# ------------

# router-ios#show running-config | section ^snmp-server
# snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F
# snmp-server user userPaul dev v1 access 24
# snmp-server group mergedGroup v3 auth
# snmp-server community mergedComm RW testACL
# snmp-server contact contact updated using merged
# snmp-server enable traps tty
# snmp-server enable traps ospf state-change
# snmp-server enable traps ospf errors
# snmp-server enable traps ospf retransmit
# snmp-server enable traps ospf lsa
# snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
# snmp-server enable traps ospf cisco-specific state-change shamlink interface
# snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
# snmp-server enable traps ospf cisco-specific errors
# snmp-server enable traps ospf cisco-specific retransmit
# snmp-server enable traps ospf cisco-specific lsa
# snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
# snmp-server enable traps msdp
# snmp-server enable traps syslog
# snmp-server host 172.16.2.9 informs version 2c mergedComm  msdp stun pki
# snmp-server host 172.16.2.9 mergedComm  slb pki
# snmp-server file-transfer access-group test protocol ftp
# snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3
# snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43
# snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11

# Using state: deleted

# Before state:
# -------------

# router-ios#show running-config | section ^snmp-server
# snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F
# snmp-server user userPaul dev v1 access 24
# snmp-server group mergedGroup v3 auth
# snmp-server community mergedComm RW testACL
# snmp-server contact contact updated using merged
# snmp-server enable traps tty
# snmp-server enable traps ospf state-change
# snmp-server enable traps ospf errors
# snmp-server enable traps ospf retransmit
# snmp-server enable traps ospf lsa
# snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
# snmp-server enable traps ospf cisco-specific state-change shamlink interface
# snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
# snmp-server enable traps ospf cisco-specific errors
# snmp-server enable traps ospf cisco-specific retransmit
# snmp-server enable traps ospf cisco-specific lsa
# snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
# snmp-server enable traps msdp
# snmp-server enable traps syslog
# snmp-server host 172.16.2.9 informs version 2c mergedComm  msdp stun pki
# snmp-server host 172.16.2.9 mergedComm  slb pki
# snmp-server file-transfer access-group test protocol ftp
# snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3
# snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43
# snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11

# Deleted play:
# -------------

- name: Remove all existing configuration
  cisco.ios.ios_snmp_server:
    state: deleted

# Commands Fired:
# ---------------

# "commands": [
#     "no snmp-server contact contact updated using merged",
#     "no snmp-server file-transfer access-group test protocol ftp",
#     "no snmp-server enable traps msdp",
#     "no snmp-server enable traps syslog",
#     "no snmp-server enable traps tty",
#     "no snmp-server enable traps ospf cisco-specific errors",
#     "no snmp-server enable traps ospf cisco-specific retransmit",
#     "no snmp-server enable traps ospf cisco-specific lsa",
#     "no snmp-server enable traps ospf cisco-specific state-change nssa-trans-change",
#     "no snmp-server enable traps ospf cisco-specific state-change shamlink interface",
#     "no snmp-server enable traps ospf cisco-specific state-change shamlink neighbor",
#     "no snmp-server enable traps ospf errors",
#     "no snmp-server enable traps ospf retransmit",
#     "no snmp-server enable traps ospf lsa",
#     "no snmp-server enable traps ospf state-change",
#     "no snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency",
#     "no snmp-server host 172.16.2.9 informs version 2c mergedComm msdp stun pki",
#     "no snmp-server host 172.16.2.9 mergedComm slb pki",
#     "no snmp-server group mergedGroup v3 auth",
#     "no snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F",
#     "no snmp-server community mergedComm rw testACL",
#     "no snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3",
#     "no snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43",
#     "no snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11",
#     "no snmp-server user userPaul dev v1 access 24"
# ],

# After state:
# ------------

# router-ios#show running-config | section ^snmp-server
# --------------------- EMPTY -----------------

# Using state: overridden

# Before state:
# -------------

# router-ios#show running-config | section ^snmp-server
# snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F
# snmp-server user userPaul dev v1 access 24
# snmp-server group mergedGroup v3 auth
# snmp-server community mergedComm RW testACL
# snmp-server contact contact updated using merged
# snmp-server enable traps tty
# snmp-server enable traps ospf state-change
# snmp-server enable traps ospf errors
# snmp-server enable traps ospf retransmit
# snmp-server enable traps ospf lsa
# snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
# snmp-server enable traps ospf cisco-specific state-change shamlink interface
# snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
# snmp-server enable traps ospf cisco-specific errors
# snmp-server enable traps ospf cisco-specific retransmit
# snmp-server enable traps ospf cisco-specific lsa
# snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
# snmp-server enable traps msdp
# snmp-server enable traps syslog
# snmp-server host 172.16.2.9 informs version 2c mergedComm  msdp stun pki
# snmp-server host 172.16.2.9 mergedComm  slb pki
# snmp-server file-transfer access-group test protocol ftp
# snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3
# snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43
# snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11

# Overridden play:
# ----------------

- name: Override commands with provided configuration
  cisco.ios.ios_snmp_server:
    config:
      location: "location entry for snmp"
      packet_size: 500
      communities:
        - acl_v4: acl_uq
          name: communityOverriden
          rw: true
    state: overridden

# Commands Fired:
# ---------------
# "commands": [
#       "no snmp-server contact contact updated using merged",
#       "no snmp-server file-transfer access-group test protocol ftp",
#       "snmp-server location location entry for snmp",
#       "snmp-server packetsize 500",
#       "no snmp-server enable traps msdp",
#       "no snmp-server enable traps syslog",
#       "no snmp-server enable traps tty",
#       "no snmp-server enable traps ospf cisco-specific errors",
#       "no snmp-server enable traps ospf cisco-specific retransmit",
#       "no snmp-server enable traps ospf cisco-specific lsa",
#       "no snmp-server enable traps ospf cisco-specific state-change nssa-trans-change",
#       "no snmp-server enable traps ospf cisco-specific state-change shamlink interface",
#       "no snmp-server enable traps ospf cisco-specific state-change shamlink neighbor",
#       "no snmp-server enable traps ospf errors",
#       "no snmp-server enable traps ospf retransmit",
#       "no snmp-server enable traps ospf lsa",
#       "no snmp-server enable traps ospf state-change",
#       "no snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency",
#       "no snmp-server host 172.16.2.9 informs version 2c mergedComm msdp stun pki",
#       "no snmp-server host 172.16.2.9 mergedComm slb pki",
#       "no snmp-server group mergedGroup v3 auth",
#       "no snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F",
#       "snmp-server community communityOvverriden rw acl_uq",
#       "no snmp-server community mergedComm rw testACL",
#       "no snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3",
#       "no snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43",
#       "no snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11",
#       "no snmp-server user userPaul dev v1 access 24"
#     ],

# After state:
# ------------

# router-ios#show running-config | section ^snmp-server
# snmp-server community communityOverriden RW acl_uq
# snmp-server packetsize 500
# snmp-server location location entry for snmp

# Using state: replaced

# Before state:
# -------------

# router-ios#show running-config | section ^snmp-server
# snmp-server community communityOverriden RW acl_uq
# snmp-server packetsize 500
# snmp-server location location entry for snmp

# Replaced play:
# --------------

- name: Replace commands with provided configuration
  cisco.ios.ios_snmp_server:
    config:
      location: "updated location entry"
      packet_size: 500
      communities:
        - acl_v4: acl_uq
          name: communityOverriden
          rw: true
    state: replaced

# Commands Fired:
# ---------------

# "commands": [
#     "snmp-server location updated location entry"
#     ],

# After state:
# ------------

# router-ios#show running-config | section ^snmp-server
# snmp-server community communityOverriden RW acl_uq
# snmp-server packetsize 500
# snmp-server location updated location entry

# Using state: gathered

# Before state:
# -------------

# router-ios#show running-config | section ^snmp-server
# snmp-server engineID remote 172.16.0.12 udp-port 25 AB0C5342FF0F
# snmp-server user userPaul dev v1 access 24
# snmp-server group mergedGroup v3 auth
# snmp-server community communityOvverriden RW acl_uq
# snmp-server community mergedComm RW testACL
# snmp-server packetsize 500
# snmp-server location updated location entry
# snmp-server contact contact updated using merged
# snmp-server enable traps tty
# snmp-server enable traps ospf state-change
# snmp-server enable traps ospf errors
# snmp-server enable traps ospf retransmit
# snmp-server enable traps ospf lsa
# snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
# snmp-server enable traps ospf cisco-specific state-change shamlink interface
# snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
# snmp-server enable traps ospf cisco-specific errors
# snmp-server enable traps ospf cisco-specific retransmit
# snmp-server enable traps ospf cisco-specific lsa
# snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
# snmp-server enable traps msdp
# snmp-server enable traps syslog
# snmp-server host 172.16.2.9 informs version 2c mergedComm  msdp stun pki
# snmp-server host 172.16.2.9 mergedComm  slb pki
# snmp-server file-transfer access-group test protocol ftp
# snmp-server password-policy MergedPolicy define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3
# snmp-server password-policy MergedPolicy2 define min-len 12 upper-case 12 special-char 22 change 43
# snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11

# Gathered play:
# --------------

- name: Gather listed snmp config
  cisco.ios.ios_snmp_server:
    state: gathered

# Module Execution Result:
# ------------------------

#   "gathered": {
#         "communities": [
#             {
#                 "acl_v4": "acl_uq",
#                 "name": "communityOvverriden",
#                 "rw": true
#             },
#             {
#                 "acl_v4": "testACL",
#                 "name": "mergedComm",
#                 "rw": true
#             }
#         ],
#         "contact": "contact updated using merged",
#         "engine_id": [
#             {
#                 "id": "AB0C5342FF0F",
#                 "remote": {
#                     "host": "172.16.0.12",
#                     "udp_port": 25
#                 }
#             }
#         ],
#         "file_transfer": {
#             "access_group": "test",
#             "protocol": [
#                 "ftp"
#             ]
#         },
#         "groups": [
#             {
#                 "group": "mergedGroup",
#                 "version": "v3",
#                 "version_option": "auth"
#             }
#         ],
#         "hosts": [
#             {
#                 "community_string": "mergedComm",
#                 "host": "172.16.2.9",
#                 "informs": true,
#                 "traps": [
#                     "msdp",
#                     "stun",
#                     "pki"
#                 ],
#                 "version": "2c"
#             },
#             {
#                 "community_string": "mergedComm",
#                 "host": "172.16.2.9",
#                 "traps": [
#                     "slb",
#                     "pki"
#                 ]
#             }
#         ],
#         "location": "updated location entry",
#         "packet_size": 500,
#         "password_policy": [
#             {
#                 "change": 3,
#                 "digits": 23,
#                 "lower_case": 12,
#                 "max_len": 24,
#                 "policy_name": "MergedPolicy",
#                 "special_char": 32,
#                 "upper_case": 12
#             },
#             {
#                 "change": 43,
#                 "min_len": 12,
#                 "policy_name": "MergedPolicy2",
#                 "special_char": 22,
#                 "upper_case": 12
#             },
#             {
#                 "change": 11,
#                 "digits": 23,
#                 "max_len": 12,
#                 "min_len": 12,
#                 "policy_name": "policy3",
#                 "special_char": 22,
#                 "upper_case": 12
#             }
#         ],
#         "traps": {
#             "cef": {
#                 "enable": true,
#                 "inconsistency": true,
#                 "peer_fib_state_change": true,
#                 "peer_state_change": true,
#                 "resource_failure": true
#             },
#             "msdp": true,
#             "ospf": {
#                 "cisco_specific": {
#                     "error": true,
#                     "lsa": true,
#                     "retransmit": true,
#                     "state_change": {
#                         "nssa_trans_change": true,
#                         "shamlink": {
#                             "interface": true,
#                             "neighbor": true
#                         }
#                     }
#                 },
#                 "error": true,
#                 "lsa": true,
#                 "retransmit": true,
#                 "state_change": true
#             },
#             "syslog": true,
#             "tty": true
#         },
#         "users": [
#             {
#                 "acl_v4": "24",
#                 "group": "dev",
#                 "username": "userPaul",
#                 "version": "v1"
#             }
#         ]
#     },

# Using state: rendered

# Rendered play:
# --------------

- name: Render the commands for provided configuration
  cisco.ios.ios_snmp_server:
    config:
      accounting:
        command: default
      cache: 2
      chassis_id: entry for chassis id
      communities:
        - acl_v6: te
          name: test
          ro: true
          view: terst1
        - acl_v4: "1322"
          name: wete
          ro: true
        - acl_v4: paul
          name: weteww
          rw: true
      contact: details contact
      context:
        - contextA
        - contextB
      engine_id:
        - id: AB0C5342FA0A
          local: true
        - id: AB0C5342FAAB
          remote:
            host: 172.16.0.2
            udp_port: 23
        - id: AB0C5342FAAA
          remote:
            host: 172.16.0.1
            udp_port: 22
      file_transfer:
        access_group: testAcl
        protocol:
          - ftp
          - rcp
      groups:
        - group: grpFamily
          version: v3
          version_option: auth
        - context: mycontext
          group: grpFamily
          version: v1
        - acl_v4: "2"
          group: grp1
          notify: me
          version: v1
        - group: newtera
          version: v3
          version_option: priv
        - group: relaplacing
          version: v3
          version_option: noauth
      hosts:
        - community_string: check
          host: 172.16.2.99
          informs: true
          traps:
            - msdp
            - stun
          version: 2c
        - community_string: check
          host: 172.16.2.99
          traps:
            - slb
            - pki
        - community_string: checktrap
          host: 172.16.2.99
          traps:
            - isis
            - hsrp
        - community_string: newtera
          host: 172.16.2.1
          traps:
            - rsrb
            - pim
            - rsvp
            - slb
            - pki
          version: "3"
          version_option: priv
        - community_string: relaplacing
          host: 172.16.2.1
          traps:
            - slb
            - pki
          version: "3"
          version_option: noauth
        - community_string: trapsac
          host: 172.16.2.1
          traps:
            - tty
            - bgp
          version: 2c
        - community_string: www
          host: 172.16.1.1
          traps:
            - tty
            - bgp
          version: "3"
          version_option: auth
      inform:
        pending: 2
      ip:
        dscp: 2
      location: "entry for snmp location"
      packet_size: 500
      password_policy:
        - change: 3
          digits: 23
          lower_case: 12
          max_len: 24
          policy_name: policy1
          special_char: 32
          upper_case: 12
        - change: 9
          min_len: 12
          policy_name: policy2
          special_char: 22
          upper_case: 12
        - change: 11
          digits: 23
          max_len: 12
          min_len: 12
          policy_name: policy3
          special_char: 22
          upper_case: 12
      queue_length: 2
      source_interface: Loopback999
      system_shutdown: true
      trap_source: GigabitEthernet0/0
      trap_timeout: 2
      traps:
        auth_framework:
          enable: true
        bgp:
          cbgp2: true
          enable: true
        bfd:
          enable: true
          session_down: true
          session_up: true
        bridge:
          enable: true
          newroot: true
          topologychange: true
        casa: true
        cef:
          enable: true
          inconsistency: true
          peer_fib_state_change: true
          peer_state_change: true
          resource_failure: true
        dlsw:
          enable: true
        eigrp: true
        ethernet:
          cfm:
            alarm: true
          evc:
            status: true
        event_manager: true
        flowmon: true
        frame_relay:
          enable: true
          subif:
            enable: true
        hsrp: true
        ike:
          policy:
            add: true
            delete: true
          tunnel:
            start: true
            stop: true
        ipmulticast: true
        ipsec:
          cryptomap:
            add: true
            attach: true
            delete: true
            detach: true
          too_many_sas: true
          tunnel:
            start: true
            stop: true
        ipsla: true
        l2tun:
          pseudowire_status: true
          session: true
        msdp: true
        ospf:
          cisco_specific:
            error: true
            lsa: true
            retransmit: true
            state_change:
              nssa_trans_change: true
              shamlink:
                interface: true
                neighbor: true
          error: true
          lsa: true
          retransmit: true
          state_change: true
        pim:
          enable: true
          invalid_pim_message: true
          neighbor_change: true
          rp_mapping_change: true
        pki: true
        rsvp: true
        snmp:
          authentication: true
          coldstart: true
          linkdown: true
          linkup: true
          warmstart: true
        syslog: true
        tty: true
      users:
        - acl_v4: "24"
          group: groupFamily
          username: paul
          version: v1
        - acl_v4: ipv6
          group: groupFamily
          username: domnic
          version: v3
        - group: relaplacing
          username: relaplacing
          version: v3
    state: rendered

# Module Execution Result:
# ------------------------

# "rendered": [
#     "snmp-server accounting commands default",
#     "snmp-server cache interval 2",
#     "snmp-server chassis-id entry for chassis id",
#     "snmp-server contact details contact",
#     "snmp-server file-transfer access-group testAcl protocol ftp rcp",
#     "snmp-server inform pending 2",
#     "snmp-server ip dscp 2",
#     "snmp-server location entry for snmp location",
#     "snmp-server packetsize 500",
#     "snmp-server queue-length 2",
#     "snmp-server trap timeout 2",
#     "snmp-server source-interface informs Loopback999",
#     "snmp-server trap-source GigabitEthernet0/0",
#     "snmp-server system-shutdown",
#     "snmp-server enable traps auth-framework",
#     "snmp-server enable traps bfd session-down session-up",
#     "snmp-server enable traps bgp cbgp2",
#     "snmp-server enable traps bridge newroot topologychange",
#     "snmp-server enable traps casa",
#     "snmp-server enable traps eigrp",
#     "snmp-server enable traps event-manager",
#     "snmp-server enable traps flowmon",
#     "snmp-server enable traps hsrp",
#     "snmp-server enable traps ipsla",
#     "snmp-server enable traps msdp",
#     "snmp-server enable traps pki",
#     "snmp-server enable traps rsvp",
#     "snmp-server enable traps syslog",
#     "snmp-server enable traps tty",
#     "snmp-server enable traps ipmulticast",
#     "snmp-server enable traps ike policy add",
#     "snmp-server enable traps ike policy delete",
#     "snmp-server enable traps ike tunnel start",
#     "snmp-server enable traps ike tunnel stop",
#     "snmp-server enable traps ipsec cryptomap add",
#     "snmp-server enable traps ipsec cryptomap delete",
#     "snmp-server enable traps ipsec cryptomap attach",
#     "snmp-server enable traps ipsec cryptomap detach",
#     "snmp-server enable traps ipsec tunnel start",
#     "snmp-server enable traps ipsec tunnel stop",
#     "snmp-server enable traps ipsec too-many-sas",
#     "snmp-server enable traps ospf cisco-specific errors",
#     "snmp-server enable traps ospf cisco-specific retransmit",
#     "snmp-server enable traps ospf cisco-specific lsa",
#     "snmp-server enable traps ospf cisco-specific state-change nssa-trans-change",
#     "snmp-server enable traps ospf cisco-specific state-change shamlink interface",
#     "snmp-server enable traps ospf cisco-specific state-change shamlink neighbor",
#     "snmp-server enable traps ospf errors",
#     "snmp-server enable traps ospf retransmit",
#     "snmp-server enable traps ospf lsa",
#     "snmp-server enable traps ospf state-change",
#     "snmp-server enable traps l2tun pseudowire status",
#     "snmp-server enable traps l2tun session",
#     "snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message",
#     "snmp-server enable traps snmp authentication linkdown linkup warmstart coldstart",
#     "snmp-server enable traps frame-relay",
#     "snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency",
#     "snmp-server enable traps dlsw",
#     "snmp-server enable traps ethernet evc status",
#     "snmp-server enable traps ethernet cfm alarm",
#     "snmp-server host 172.16.2.99 informs version 2c check msdp stun",
#     "snmp-server host 172.16.2.99 check slb pki",
#     "snmp-server host 172.16.2.99 checktrap isis hsrp",
#     "snmp-server host 172.16.2.1 version 3 priv newtera rsrb pim rsvp slb pki",
#     "snmp-server host 172.16.2.1 version 3 noauth relaplacing slb pki",
#     "snmp-server host 172.16.2.1 version 2c trapsac tty bgp",
#     "snmp-server host 172.16.1.1 version 3 auth www tty bgp",
#     "snmp-server group grpFamily v1 context mycontext",
#     "snmp-server group grp1 v1 notify me access 2",
#     "snmp-server group newtera v3 priv",
#     "snmp-server group relaplacing v3 noauth",
#     "snmp-server engineID local AB0C5342FA0A",
#     "snmp-server engineID remote 172.16.0.2 udp-port 23 AB0C5342FAAB",
#     "snmp-server engineID remote 172.16.0.1 udp-port 22 AB0C5342FAAA",
#     "snmp-server community test view terst1 ro ipv6 te",
#     "snmp-server community wete ro 1322",
#     "snmp-server community weteww rw paul",
#     "snmp-server context contextA",
#     "snmp-server context contextB",
#     "snmp-server password-policy policy1 define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3",
#     "snmp-server password-policy policy2 define min-len 12 upper-case 12 special-char 22 change 9",
#     "snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11",
#     "snmp-server user paul groupFamily v1 access 24",
#     "snmp-server user domnic groupFamily v3 access ipv6",
#     "snmp-server user relaplacing relaplacing v3"
# ]

# Using state: parsed

# File: parsed.cfg
# ----------------

# snmp-server engineID local AB0C5342FA0A
# snmp-server engineID remote 172.16.0.2 udp-port 23 AB0C5342FAAB
# snmp-server engineID remote 172.16.0.1 udp-port 22 AB0C5342FAAA
# snmp-server user newuser newfamily v1 access 24
# snmp-server user paul familypaul v3 access ipv6 ipv6acl
# snmp-server user replaceUser replaceUser v3
# snmp-server group group0 v3 auth
# snmp-server group group1 v1 notify me access 2
# snmp-server group group2 v3 priv
# snmp-server group replaceUser v3 noauth
# snmp-server community commu1 view view1 RO ipv6 te
# snmp-server community commu2 RO 1322
# snmp-server community commu3 RW paul
# snmp-server trap timeout 2
# snmp-server trap-source GigabitEthernet0/0
# snmp-server source-interface informs Loopback999
# snmp-server packetsize 500
# snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
# snmp-server host 172.16.2.99 informs version 2c check  msdp stun
# snmp-server host 172.16.2.1 version 2c trapsac  tty bgp
# snmp-server host 172.16.1.1 version 3 auth group0  tty bgp
# snmp-server context contextWord1
# snmp-server context contextWord2
# snmp-server file-transfer access-group testAcl protocol ftp
# snmp-server file-transfer access-group testAcl protocol rcp
# snmp-server cache interval 2
# snmp-server password-policy policy2 define min-len 12 upper-case 12 special-char 22 change 9
# snmp-server password-policy policy3 define min-len 12 max-len 12 upper-case 12 special-char 22 digits 23 change 11
# snmp-server accounting commands default
# snmp-server inform pending 2

# Parsed play:
# ------------

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_snmp_server:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
#  "parsed": {
#     "accounting": {
#         "command": "default"
#     },
#     "cache": 2,
#     "communities": [
#         {
#             "acl_v6": "te",
#             "name": "commu1",
#             "ro": true,
#             "view": "view1"
#         },
#         {
#             "acl_v4": "1322",
#             "name": "commu2",
#             "ro": true
#         },
#         {
#             "acl_v4": "paul",
#             "name": "commu3",
#             "rw": true
#         }
#     ],
#     "context": [
#         "contextWord1",
#         "contextWord2"
#     ],
#     "engine_id": [
#         {
#             "id": "AB0C5342FA0A",
#             "local": true
#         },
#         {
#             "id": "AB0C5342FAAA",
#             "remote": {
#                 "host": "172.16.0.1",
#                 "udp_port": 22
#             }
#         },
#         {
#             "id": "AB0C5342FAAB",
#             "remote": {
#                 "host": "172.16.0.2",
#                 "udp_port": 23
#             }
#         }
#     ],
#     "file_transfer": {
#         "access_group": "testAcl",
#         "protocol": [
#             "rcp",
#             "ftp"
#         ]
#     },
#     "groups": [
#         {
#             "group": "group0",
#             "version": "v3",
#             "version_option": "auth"
#         },
#         {
#             "acl_v4": "2",
#             "group": "group1",
#             "notify": "me",
#             "version": "v1"
#         },
#         {
#             "group": "group2",
#             "version": "v3",
#             "version_option": "priv"
#         },
#         {
#             "group": "replaceUser",
#             "version": "v3",
#             "version_option": "noauth"
#         }
#     ],
#     "hosts": [
#         {
#             "community_string": "group0",
#             "host": "172.16.1.1",
#             "traps": [
#                 "tty",
#                 "bgp"
#             ],
#             "version": "3",
#             "version_option": "auth"
#         },
#         {
#             "community_string": "trapsac",
#             "host": "172.16.2.1",
#             "traps": [
#                 "tty",
#                 "bgp"
#             ],
#             "version": "2c"
#         },
#         {
#             "community_string": "check",
#             "host": "172.16.2.99",
#             "informs": true,
#             "traps": [
#                 "msdp",
#                 "stun"
#             ],
#             "version": "2c"
#         }
#     ],
#     "inform": {
#         "pending": 2
#     },
#     "packet_size": 500,
#     "password_policy": [
#         {
#             "change": 9,
#             "min_len": 12,
#             "policy_name": "policy2",
#             "special_char": 22,
#             "upper_case": 12
#         },
#         {
#             "change": 11,
#             "digits": 23,
#             "max_len": 12,
#             "min_len": 12,
#             "policy_name": "policy3",
#             "special_char": 22,
#             "upper_case": 12
#         }
#     ],
#     "source_interface": "Loopback999",
#     "trap_source": "GigabitEthernet0/0",
#     "trap_timeout": 2,
#     "traps": {
#         "vrfmib": {
#             "vnet_trunk_down": true,
#             "vnet_trunk_up": true,
#             "vrf_down": true,
#             "vrf_up": true
#         }
#     },
#     "users": [
#         {
#             "acl_v4": "24",
#             "group": "newfamily",
#             "username": "newuser",
#             "version": "v1"
#         },
#         {
#             "acl_v4": "ipv6",
#             "group": "familypaul",
#             "username": "paul",
#             "version": "v3"
#         },
#         {
#             "group": "replaceUser",
#             "username": "replaceUser",
#             "version": "v3"
#         }
#     ]
# }

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: `"This output will always be in the same format as the module argspec.\n"`
before dictionary	The configuration prior to the module execution. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `"This output will always be in the same format as the module argspec.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `["snmp-server host 172.16.2.99 informs version 2c check msdp stun", "snmp-server engineID remote 172.16.0.2 udp-port 23 AB0C5342FAAB", "snmp-server group grp1 v1 notify me access 2"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["snmp-server enable traps ipsec cryptomap attach", "snmp-server password-policy policy1 define max-len 24 upper-case 12 lower-case 12 special-char 32 digits 23 change 3", "snmp-server cache interval 2"]`

Authors

Sagar Paul (@KB-perByte)

cisco.ios.ios_snmp_server module – Resource module to configure snmp server.

Synopsis

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 

Return Values 