cisco.iosxr.iosxr_config module – Module to manage configuration sections.
Note
This module is part of the cisco.iosxr collection (version 6.1.1).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_config.
New in cisco.iosxr 1.0.0
Synopsis
Cisco IOS XR configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with IOS XR configuration sections in a deterministic way.
Parameters
Parameter |
Comments |
|---|---|
Enters into administration configuration mode for making config changes to the device. Choices:
|
|
The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set. |
|
This argument will cause the module to create a full backup of the current Choices:
|
|
This is a dict object containing configurable options related to backup file path. The value of this option is read only when |
|
This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of |
|
The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time> |
|
The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system. |
|
Allows a commit description to be specified to be included when the configuration is committed. If the configuration is not changed or committed, this argument is ignored. Default: |
|
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The config argument allows the implementer to pass in the configuration to use as the base config for comparison. The configuration lines for this option should be similar to how it will appear if present in the running-configuration of the device to ensure idempotency and correct diff. |
|
disable default comment when set to True. Choices:
|
|
Enters into exclusive configuration mode that locks out all users from committing configuration changes until the exclusive session ends. Choices:
|
|
The force argument instructs the module to not consider the current devices running-config. When set to true, this will cause the module to push the contents of src into the device without first checking if already configured. Note this argument should be considered deprecated. To achieve the equivalent, set the Choices:
|
|
Allows a commit label to be specified to be included when the configuration is committed. A valid label must begin with an alphabet and not exceed 30 characters, only alphabets, digits, hyphens and underscores are allowed. If the configuration is not changed or committed, this argument is ignored. |
|
The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config as found in the device running-config to ensure idempotency and correct diff. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. |
|
Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device. Choices:
|
|
The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands. |
|
Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct. Choices:
|
|
Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with lines, parents. The configuration lines in the source file should be similar to how it will appear if present in the running-configuration of the device to ensure idempotency and correct diff. |
Notes
Note
This module works with connection
network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_iosxr.htmlThis module does not support
netconfconnectionAbbreviated commands are NOT idempotent, see https://docs.ansible.com/ansible/latest/network/user_guide/faq.html#why-do-the-config-modules-always-return-changed-true-with-abbreviated-commands
Avoid service disrupting changes (viz. Management IP) from config replace.
Do not use
endin the replace config file.To ensure idempotency and correct diff the configuration lines in the relevant module options should be similar to how they appear if present in the running configuration on device including the indentation.
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- name: configure top level configuration
cisco.iosxr.iosxr_config:
lines: hostname {{ inventory_hostname }}
- name: configure interface settings
cisco.iosxr.iosxr_config:
lines:
- description test interface
- ip address 172.31.1.1 255.255.255.0
parents: interface GigabitEthernet0/0/0/0
- name: load a config from disk and replace the current config
cisco.iosxr.iosxr_config:
src: config.cfg
replace: config
backup: 'yes'
- name: 'for idempotency, use full-form commands'
cisco.iosxr.iosxr_config:
lines:
- shutdown
parents: interface GigabitEthernet0/0/0/1
- name: configurable backup path
cisco.iosxr.iosxr_config:
src: config.cfg
backup: true
backup_options:
filename: backup.cfg
dir_path: /home/user
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The full path to the backup file Returned: when backup is yes Sample: |
|
The set of commands that will be pushed to the remote device Returned: If there are commands to run against the host Sample: |
|
The date extracted from the backup file name Returned: when backup is yes Sample: |
|
The name of the backup file Returned: when backup is yes and filename is not specified in backup options Sample: |
|
The full path to the backup file excluding the timestamp Returned: when backup is yes and filename is not specified in backup options Sample: |
|
The time extracted from the backup file name Returned: when backup is yes Sample: |
|
The set of commands that will be pushed to the remote device Returned: If there are commands to run against the host Sample: |