cisco.iosxr.iosxr_lldp_interfaces module – Resource module to configure LLDP interfaces.
Note
This module is part of the cisco.iosxr collection (version 6.1.1).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_lldp_interfaces.
New in cisco.iosxr 1.0.0
Synopsis
This module manages Link Layer Discovery Protocol (LLDP) attributes of interfaces on IOS-XR devices.
Parameters
Parameter |
Comments |
|---|---|
A dictionary of LLDP interfaces options. |
|
Specifies LLDP destination configuration on the interface. |
|
Specifies the LLDP destination mac address on the interface. Choices:
|
|
Name/Identifier of the interface or Ether-Bundle. |
|
Enable/disable LLDP RX on an interface. Choices:
|
|
Enable/disable LLDP TX on an interface. Choices:
|
|
This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config int. The state parsed reads the configuration from |
|
The state of the configuration after module completion. Choices:
|
Notes
Note
This module works with connection
network_cli. See the IOS-XR Platform Options.
Examples
# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:40:23.104 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
- name: Merge provided configuration with running configuration
cisco.iosxr.iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
destination:
mac_address: ieee-nearest-non-tmpr-bridge
transmit: false
- name: GigabitEthernet0/0/0/2
destination:
mac_address: ieee-nearest-bridge
receive: false
state: merged
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "name": "GigabitEthernet0/0/0/1"
# },
# {
# "name": "GigabitEthernet0/0/0/2"
# }
# ]
#
# "commands": [
# "interface GigabitEthernet0/0/0/2",
# "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "lldp transmit disable",
# "interface GigabitEthernet0/0/0/1",
# "lldp receive disable",
# "lldp destination mac-address ieee-nearest-bridge"
# ]
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
- name: >-
Replace existing LLDP configurations of specified interfaces with provided
configuration
cisco.iosxr.iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
destination:
mac_address: ieee-nearest-non-tmpr-bridge
state: replaced
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# "commands": [
# "interface GigabitEthernet0/0/0/1",
# "no lldp receive disable",
# "lldp destination mac-address ieee-nearest-non-tmpr-bridge"
# ]
#
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/1"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:02:57.062 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
# Using overridden
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:15:40.465 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
- name: >-
Override the LLDP configurations of all the interfaces with provided
configurations
cisco.iosxr.iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
transmit: false
state: overridden
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
# "commands": [
# "interface GigabitEthernet0/0/0/2",
# "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "no lldp transmit disable",
# "interface GigabitEthernet0/0/0/1",
# "no lldp destination mac-address ieee-nearest-bridge",
# "no lldp receive disable",
# "lldp transmit disable"
# ]
#
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "name": "GigabitEthernet0/0/0/1",
# "transmit": false
# },
# {
# "name": "GigabitEthernet0/0/0/2"
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:22:25.604 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# transmit disable
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
# Using deleted
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:26:21.498 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
- name: Delete LLDP configurations of all interfaces (Note - This won't delete the
interfaces themselves)
cisco.iosxr.iosxr_lldp_interfaces:
state: deleted
#
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# "commands": [
# "interface GigabitEthernet0/0/0/1",
# "no lldp destination mac-address ieee-nearest-bridge",
# "no lldp receive disable",
# "interface GigabitEthernet0/0/0/2",
# "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "no lldp transmit disable"
# ]
#
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "name": "GigabitEthernet0/0/0/1"
# },
# {
# "name": "GigabitEthernet0/0/0/2"
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:30:14.618 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
# Using parsed:
# parsed.cfg
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
- name: Convert lacp interfaces config to argspec without connecting to the appliance
cisco.iosxr.iosxr_lldp_interfaces:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
# ------------------------
# Module Execution Result
# ------------------------
# parsed: [
# - name: GigabitEthernet0/0/0/1
# destination:
# mac_address: ieee-nearest-non-tmpr-bridge
# transmit: False
# - name: GigabitEthernet0/0/0/2
# destination:
# mac_address: ieee-nearest-bridge
# receive: False
# ]
# Using gathered:
# Device config:
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
- name: Gather IOSXR lldp interfaces configuration
cisco.iosxr.iosxr_lldp_interfaces:
config:
state: gathered
# ------------------------
# Module Execution Result
# ------------------------
# gathered:
# - name: GigabitEthernet0/0/0/1
# destination:
# mac_address: ieee-nearest-non-tmpr-bridge
# transmit: False
# - name: GigabitEthernet0/0/0/2
# destination:
# mac_address: ieee-nearest-bridge
# receive: False
# Using rendred:
- name: Render platform specific commands from task input using rendered state
cisco.iosxr.iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
destination:
mac_address: ieee-nearest-non-tmpr-bridge
transmit: false
- name: GigabitEthernet0/0/0/2
destination:
mac_address: ieee-nearest-bridge
receive: false
state: rendered
# ------------------------
# Module Execution Result
# ------------------------
# "rendered": [
# "interface GigabitEthernet0/0/0/2",
# "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "lldp transmit disable",
# "interface GigabitEthernet0/0/0/1",
# "lldp receive disable",
# "lldp destination mac-address ieee-nearest-bridge"
# ]
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The configuration as structured data after module completion. Returned: when changed Sample: |
|
The configuration as structured data prior to module invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |