cisco.iosxr.iosxr_snmp_server module – Resource module to configure snmp server.

Note

This module is part of the cisco.iosxr collection (version 6.1.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_snmp_server.

New in cisco.iosxr 2.6.0

Synopsis 

This module configures and manages the attributes of snmp-server on Cisco IOSXR platforms.

Parameters 

Parameter	Comments
config dictionary	SNMP server configuration.
chassis_id string	SNMP chassis identifier.
communities list / elements=dictionary	Enable SNMP; set community string and access privileges.
acl_v4 string	Ipv4 access list.
acl_v6 string	IPv6 access list name.
name string	Community name.
ro boolean	Only reads are permitted. Choices: `false` `true`
rw boolean	Read-write access. Choices: `false` `true`
sdrowner boolean	SDR Owner permissions for MIB Objects. Choices: `false` `true`
systemowner boolean	System Owner permissions for MIB objects. Choices: `false` `true`
v4_acl string	V4 Access-list name.
community_maps list / elements=dictionary	Community Mapping as per RFC-2576.
context string	Context Name for the community mapping.
name string	Community name
security_name string	Security Name for the community mapping.
target_list string	list of targets valid with this community.
contact string	Person to contact about the syste,.
context list / elements=string	Create/Delete a context apart from default
correlator dictionary	Configure properties of the event correlator
buffer_size integer	Configure size of the correlator buffer.
rule_sets list / elements=dictionary	Configure a specified correlation ruleset.
name string	Name of the ruleset
rules list / elements=dictionary	Configure a specified correlation rule.
rule_name string	name of rule.
timeout integer	Specify timeout.
drop dictionary	Silently drop SNMP packets
report_IPv4 string	Config to drop snmpv3 error reports matching Ipv4 ACL.
report_IPv6 string	Config to drop snmpv3 error reports matching Ipv4 ACL.
unknown_user boolean	Silently drop unknown v3 user packets Choices: `false` `true`
engineid dictionary	SNMPv3 engine ID configuration.
local string	Local SNMP agent
groups list / elements=dictionary	SNMP USM group
acl_v4 aliases: Ipv4_acl string	Ipv4 Type of Access-list
acl_v6 aliases: Ipv6_acl string	Ipv6 Type of Access-list
context string	Specify a context to associate with the group
group string	SNMP group for the user
notify string	View to restrict notifications
read string	View to restrict read access
v4_acl string	V4 Access-list name
version string	snmp security group version Choices: `"v1"` `"v3"` `"v2c"`
write string	View to restrict write access
hosts list / elements=dictionary	Notification destinations
community string	community string.
host string	Hostname or IP address of SNMP notification host.
informs boolean	Use SNMP inform messages. Choices: `false` `true`
traps boolean	Use SNMP trap messages Choices: `false` `true`
udp_port integer	UDP destination port for notification messages.
version string	Notification message SNMP version. Choices: `"1"` `"2c"` `"3"`
ifindex boolean	Enable ifindex persistence Choices: `false` `true`
ifmib dictionary	IF-MIB configuration commands.
ifalias_long boolean	Modify parameters for ifAlias object. Choices: `false` `true`
internal_cache_max_duration integer	IFMIB internal lookahead cache.
ipsubscriber boolean	Enable ipsubscriber interfaces in IFMIB. Choices: `false` `true`
stats boolean	Modify IF-MIB statistics parameters. Choices: `false` `true`
inform dictionary	Configure SNMP Informs options
pending integer	Set number of unacked informs to hold
retries integer	Set retry count for informs
timeout integer	Set timeout for informs
interfaces list / elements=dictionary	Enter the SNMP interface configuration commands.
index_persistent boolean	Configure ifIndex attributes Persistency across system reloads. Choices: `false` `true`
name string	Name of interface.
notification_linkupdown_disable boolean	Disable linkUp and linkDown notification. Choices: `false` `true`
ipv4 dictionary	Mark the dscp/precedence bit for ipv4 packets.
dscp string	Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
precedence string	Set precedence Please refer vendor document for valid entries.
ipv6 dictionary	Mark the dscp/precedence bit for ipv4 packets.
dscp string	Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
precedence string	Set precedence Please refer vendor document for valid entries.
location string	The sysLocation string.
logging_threshold_oid_processing integer	Configure threshold to start logging slow OID requests processing.
logging_threshold_pdu_processing integer	Configure threshold to start logging slow PDU requests processing.
mib_bulkstat_max_procmem_size integer	per process memory limit in kilo bytes
mib_bulkstat_transfer_ids list / elements=dictionary	mib bulkstat transfer ids.
buffer_size integer	Bulkstat data file maximum size.
enable boolean	Start Data Collection for this Configuration Choices: `false` `true`
format_schemaASCI boolean	format Choices: `false` `true`
name string	mib transfer-id name.
retain integer	Retention period in Min.
retry integer	Number of Retries.
schema string	Schema that contains objects to be collected.
transfer_interval integer	transfer-interval
mib_object_lists list / elements=string	mib object lists
mib_schema list / elements=dictionary	mib schema
name string	mib schema name.
object_list string	Name of an object List.
poll_interval integer	Periodicity for polling of objects in this schema in Min.
mroutemib_send_all_vrf boolean	Configurations related to IPMROUTE-MIB(cisco-support). Choices: `false` `true`
notification_log_mib dictionary	notification log mib.
default boolean	To create a default log Choices: `false` `true`
disable boolean	disable, to disable the logging in default log. Choices: `false` `true`
GlobalSize integer	GlobalSize, max number of notifications that can be logged in all logs.
size integer	size, The max number of notifications that this log (default) can hold.
oid_poll_stats boolean	Enable OID poll stats oper CLI Choices: `false` `true`
overload_control dictionary	Set overload-control params for handling incoming messages in critical processing mode.
overload_drop_time integer	Overload drop time (in seconds) for incoming queue (default 1 sec).
overload_throttle_rate integer	Overload throttle rate for incoming queue (default 500 msec)
packetsize integer	Largest SNMP packet size.
queue_length integer	Queue length (default 100).
targets list / elements=dictionary	targets
host string	Specify host name.
name string	Name of the target list.
vrf string	Specify VRF name.
throttle_time integer	Set throttle time for handling incoming messages.
timeouts dictionary	SNMP timeouts
duplicate integer	Duplicate request feature timeout
inQdrop integer	incoming queue drop feature.
pdu_stats integer	SNMP pdu statistics end to end.
subagent integer	Sub-Agent Request timeout.
threshold integer	threshold incoming queue drop feature.
trap dictionary	MIB trap configurations.
authentication_vrf_disable boolean	Disable authentication traps for packets on a vrf. Choices: `false` `true`
link_ietf boolean	Link up/down trap configuratio. Choices: `false` `true`
throttle_time integer	Set throttle time for handling more traps.
trap_source string	Assign an interface for the source address of all traps
trap_timeout integer	Set timeout for TRAP message retransmissions
traps dictionary	Enable traps to all configured recipients.
addrpool dictionary	Enable SNMP Address Pool traps.
high boolean	Enable SNMP Address Pool High Threshold trap. Choices: `false` `true`
low boolean	Enable SNMP Address Pool Low Threshold trap. Choices: `false` `true`
bfd boolean	Enable BFD traps. Choices: `false` `true`
bgp dictionary	Enable Bgp traps.
cbgp2 boolean	Enable CISCO-BGP4-MIB v2 traps. Choices: `false` `true`
updown boolean	Enable CISCO-BGP4-MIB v2 up/down traps. Choices: `false` `true`
bridgemib boolean	Enable SNMP Trap for Bridge MIB. Choices: `false` `true`
bulkstat_collection boolean	Enable Data-Collection-MIB Collection notifications. Choices: `false` `true`
bulkstat_transfer boolean	Enable Data-Collection-MIB Trnasfer notifications. Choices: `false` `true`
cisco_entity_ext boolean	Enable SNMP entity traps Choices: `false` `true`
config boolean	Enable SNMP config traps. Choices: `false` `true`
copy_complete boolean	Enable CISCO-CONFIG-COPY-MIB ccCopyCompletion traps. Choices: `false` `true`
diameter dictionary	Enable SNMP diameter traps.
peerdown boolean	Enable peer connection down notification. Choices: `false` `true`
peerup boolean	Enable peer connection up notification. Choices: `false` `true`
permanentfail boolean	Enable permanent failure notification. Choices: `false` `true`
protocolerror boolean	Enable protocol error notifications Choices: `false` `true`
transientfail boolean	Enable transient failure notification. Choices: `false` `true`
entity boolean	Enable SNMP entity traps. Choices: `false` `true`
entity_redundancy dictionary	Enable SNMP CISCO-ENTITY-REDUNDANCY-MIB traps.
all boolean	Enable all CISCO-ENTITY-REDUNDANCY-MIB traps Choices: `false` `true`
status boolean	Enable status change traps Choices: `false` `true`
switchover boolean	Enable switchover traps. Choices: `false` `true`
entity_state dictionary	Enable SNMP entity-state traps.
operstatus boolean	Enable entity oper status enable notification. Choices: `false` `true`
switchover boolean	Enable entity state switchover notifications Choices: `false` `true`
flash dictionary	Enable flash-mib traps.
insertion boolean	Enable ciscoFlashDeviceInsertedNotif. Choices: `false` `true`
removal boolean	Enable ciscoFlashDeviceRemovedNotif. Choices: `false` `true`
fru_ctrl boolean	Enable SNMP entity FRU control traps. Choices: `false` `true`
hsrp boolean	Enable SNMP hsrp traps. Choices: `false` `true`
ipsec dictionary	Enable SNMP IPSec traps.
start boolean	Enable SNMP IPsec Tunnel Start trap. Choices: `false` `true`
stop boolean	Enable SNMP IPsec Tunnel Stop trap. Choices: `false` `true`
ipsla boolean	Enable SNMP hipsla traps. Choices: `false` `true`
isakmp dictionary	Enable SNMP isakmp traps.
start boolean	Enable SNMP isakmp Tunnel Start trap. Choices: `false` `true`
stop boolean	Enable SNMP isakmp Tunnel Stop trap. Choices: `false` `true`
isis dictionary	Enable isis traps. If set to enabled , all the traps are set.
adjacency_change boolean	adjacency-change Choices: `false` `true`
all boolean	anable all is-is traps. Choices: `false` `true`
area_mismatch boolean	area-mismatch Choices: `false` `true`
attempt_to_exceed_max_sequence boolean	attempt-to-exceed-max-sequence Choices: `false` `true`
authentication_failure boolean	authentication-failure. Choices: `false` `true`
authentication_type_failure boolean	authentication-type-failure. Choices: `false` `true`
corrupted_lsp_detected boolean	isisCorruptedLSPDetected Choices: `false` `true`
database_overload boolean	database-overload Choices: `false` `true`
id_len_mismatch boolean	isisIDLenMismatch Choices: `false` `true`
lsp_error_detected boolean	lsp-error-detected. Choices: `false` `true`
lsp_too_large_to_propagate boolean	lsp-too-large-to-propagate Choices: `false` `true`
manual_address_drops boolean	manual_address_drops Choices: `false` `true`
max_area_addresses_mismatch boolean	max_area_addresses_mismatch Choices: `false` `true`
orig_lsp_buff_size_mismatch boolean	orig-lsp-buff-size-mismatch Choices: `false` `true`
own_lsp_purge boolean	own-lsp-purge Choices: `false` `true`
protocols_supported_mismatch boolean	protocols-supported-mismatch Choices: `false` `true`
rejected_adjacency boolean	rejected-adjacency Choices: `false` `true`
sequence_number_skip boolean	sequence-number-skip. Choices: `false` `true`
version_skew boolean	version-skew Choices: `false` `true`
l2tun dictionary	Enable L2TUN traps.
pseudowire_status boolean	Enable L2TUN pseudowire status traps. Choices: `false` `true`
sessions boolean	Enable L2TUN sessions traps. Choices: `false` `true`
tunnel_down boolean	Enable L2TUN tunnel DOWN traps. Choices: `false` `true`
tunnel_up boolean	Enable L2TUN tunnel UP traps. Choices: `false` `true`
l2vpn dictionary	Enable L2VPN traps.
all boolean	Enable L2VPN ALL traps. Choices: `false` `true`
cisco boolean	Enable L2VPN CISCO traps. Choices: `false` `true`
vc_down boolean	Enable L2VPN VC DOWN traps. Choices: `false` `true`
vc_up boolean	Enable L2VPN VC UP traps. Choices: `false` `true`
msdp_peer_state_change boolean	Enable SNMP MSDP traps Choices: `false` `true`
ntp boolean	Enable SNMP Cisco Ntp traps. Choices: `false` `true`
ospf dictionary	Enable Ospf traps. If set to enabled , all the traps are set.
errors dictionary	error
authentication_failure boolean	authentication-failure. Choices: `false` `true`
bad_packet boolean	bad-packet Choices: `false` `true`
config_error boolean	config-error Choices: `false` `true`
virt_authentication_failure boolean	virt-authentication-failure Choices: `false` `true`
virt_bad_packet boolean	virt-bad-packet Choices: `false` `true`
virt_config_error boolean	virt_config_error Choices: `false` `true`
lsa dictionary	lsa
lsa_maxage boolean	lsa-maxage Choices: `false` `true`
lsa_originate boolean	lsa-originate Choices: `false` `true`
retransmit dictionary	retransmit
packets boolean	packets Choices: `false` `true`
virt_packets boolean	virt-packets Choices: `false` `true`
state_change dictionary	state-change.
if_state_change boolean	if-state-change Choices: `false` `true`
neighbor_state_change boolean	neighbor-state-change Choices: `false` `true`
virtif_state_change boolean	virtif-state-change Choices: `false` `true`
virtneighbor_state_change boolean	virtneighbor-state-change Choices: `false` `true`
ospfv3 dictionary	Enable Ospfv3 traps. If set to enabled , all the traps are set.
errors dictionary	error
bad_packet boolean	bad-packet Choices: `false` `true`
config_error boolean	config-error Choices: `false` `true`
virt_bad_packet boolean	virt-bad-packet Choices: `false` `true`
virt_config_error boolean	virt_config_error Choices: `false` `true`
state_change dictionary	state-change.
if_state_change boolean	if-state-change Choices: `false` `true`
neighbor_state_change boolean	neighbor-state-change Choices: `false` `true`
nssa_state_change boolean	nssa-state-change Choices: `false` `true`
restart_helper_status_change boolean	restart-helper-status-change Choices: `false` `true`
restart_status_change boolean	restart-status-change Choices: `false` `true`
restart_virtual_helper_status_change boolean	restart-virtual-helper-status-change Choices: `false` `true`
virtif_state_change boolean	virtif-state-change Choices: `false` `true`
virtneighbor_state_change boolean	virtneighbor-state-change Choices: `false` `true`
pim dictionary	Enable Pim traps. If set to enabled , all the traps are set.
interface_state_change boolean	interface-state-change . Choices: `false` `true`
invalid_message_received boolean	invalid-message-received Choices: `false` `true`
neighbor_change boolean	neighbor-change. Choices: `false` `true`
rp_mapping_change boolean	rp-mapping-change. Choices: `false` `true`
power boolean	Enable SNMP entity power traps. Choices: `false` `true`
rf boolean	Enable SNMP RF-MIB traps. Choices: `false` `true`
rsvp dictionary	Enable rsvp traps. If set to enabled , all the traps are set.
all boolean	enable all traps. Choices: `false` `true`
lost_flow boolean	lost-flow Choices: `false` `true`
new_flow boolean	new-flow Choices: `false` `true`
selective_vrf_download_role_change boolean	Enable selective VRF download traps. Choices: `false` `true`
sensor boolean	Enable SNMP entity sensor traps Choices: `false` `true`
snmp dictionary	Enable snmp traps. If set to enabled , all the traps are set.
authentication boolean	authentication Choices: `false` `true`
coldstart boolean	coldstart. Choices: `false` `true`
linkdown boolean	link-down Choices: `false` `true`
linkup boolean	link-up Choices: `false` `true`
warmstart boolean	warmstart. Choices: `false` `true`
subscriber dictionary	Subscriber notification commands.
session_agg_access_interface boolean	Subscriber notification at access interface level Choices: `false` `true`
session_agg_node boolean	Subscriber notification at node level Choices: `false` `true`
syslog boolean	syslog Choices: `false` `true`
system boolean	Enable SNMP SYSTEMMIB-MIB traps. Choices: `false` `true`
vpls dictionary	Enable VPLS traps
all boolean	Enable all VPLS traps. Choices: `false` `true`
full_clear boolean	Enable VPLS Full Clear traps. Choices: `false` `true`
full_raise boolean	Enable VPLS Full Raise traps. Choices: `false` `true`
status boolean	Enable VPLS Status traps Choices: `false` `true`
vrrp_events boolean	vrrp Choices: `false` `true`
users list / elements=dictionary	SNMP user configuration.
acl_v4 aliases: Ipv4_acl string	Ipv4 Type of Access-list
acl_v6 aliases: Ipv6_acl string	Ipv6 Type of Access-list
group string	SNMP group for the user.
SDROwner boolean	SDR Owner permissions for MIB Objects. Choices: `false` `true`
SystemOwner boolean	System Owner permissions for MIB objects. Choices: `false` `true`
user string	SNMP user name
v4_acl string	V4 Access-list name
version string	snmp security version Choices: `"v1"` `"v2c"` `"v3"`
vrfs list / elements=dictionary	Specify the VRF in which the source address is used
context list / elements=string	Configure the source interface for SNMP notifications
hosts list / elements=dictionary	Notification destinations
community string	community string.
host string	Hostname or IP address of SNMP notification host.
informs boolean	Use SNMP inform messages. Choices: `false` `true`
traps boolean	Use SNMP trap messages Choices: `false` `true`
udp_port integer	UDP destination port for notification messages.
version string	Notification message SNMP version. Choices: `"1"` `"2c"` `"3"`
vrf string	vrf name.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOSXR device by executing the command show running-config snmp-server. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. The states replaced and overridden have identical behaviour for this module. Please refer to examples for more details. Choices: `"deleted"` `"merged"` ← (default) `"overridden"` `"replaced"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

Tested against Cisco Iosxr 7.0.2
This module works with connection network_cli.

Examples 

# Using state: merged
# Before state:
# -------------
# RP/0/RP0/CPU0:test2#show running-config snmp-server
# --------------------- EMPTY -----------------
# Merged play:
# ------------

- name: Merge the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_snmp_server:
    config:
      vrfs:
        - hosts:
            - community: test1
              host: 1.1.1.1
              traps: true
          vrf: vrf1
      users:
        - Ipv4_acl: test1
          Ipv6_acl: test2
          group: test2
          user: u1
          version: v1
      timeouts:
        duplicate: 0
        inQdrop: 0
      trap:
        throttle_time: 12
      targets:
        - host: 1.1.1.2
          name: test
      ifmib:
        internal_cache_max_duration: 4
      inform:
        retries: 7
      chassis_id: test2
      packetsize: 490
      queue_length: 2
      throttle_time: 60
      trap_source: GigabitEthernet0/0/0/2
      trap_timeout: 3
      context:
        - c1
        - c2
      contact: t1
      correlator:
        buffer_size: 1024
      communities:
        - name: test2
          ro: true
          sdrowner: true
          acl_v4: test
          acl_v6: test1
      community_maps:
        - name: cm1
          context: c1
          target_list: t1
          security_name: s1
      drop:
        report_IPv4: test1
        unknown_user: true
      ipv6:
        precedence: routine
      ipv4:
        dscp: af11
      location: test1
      logging_threshold_oid_processing: 1
      logging_threshold_pdu_processing: 1
      mib_bulkstat_max_procmem_size: 101
      mroutemib_send_all_vrf: true
      overload_control:
        overload_drop_time: 4
        overload_throttle_rate: 6
      notification_log_mib:
        GlobalSize: 5
        size: 5
      traps:
        hsrp: true
        ipsla: true
        ipsec:
          start: true
          stop: true
        bridgemib: true
        bulkstat_collection: true
        cisco_entity_ext: true
        config: true
        copy_complete: true
        addrpool:
          high: true
          low: true
        bfd: true
        bgp:
          cbgp2: true
        l2tun:
          sessions: true
          tunnel_down: true
          tunnel_up: true
        l2vpn:
          all: true
          vc_down: true
          vc_up: true
        msdp_peer_state_change: true

#
# Commands Fired:
# ------------
# "commands": [
#         "snmp-server chassis-id test2",
#         "snmp-server correlator buffer-size 1024",
#         "snmp-server contact t1",
#         "snmp-server ipv4 dscp af11",
#         "snmp-server ipv6 precedence routine",
#         "snmp-server location test1",
#         "snmp-server logging threshold oid-processing 1",
#         "snmp-server logging threshold pdu-processing 1",
#         "snmp-server mib bulkstat max-procmem-size 101",
#         "snmp-server mroutemib send-all-vrf",
#         "snmp-server overload-control 4 6",
#         "snmp-server packetsize 490",
#         "snmp-server queue-length 2",
#         "snmp-server throttle-time 60",
#         "snmp-server trap-source GigabitEthernet0/0/0/2",
#         "snmp-server trap-timeout 3",
#         "snmp-server drop report acl IPv4 test1",
#         "snmp-server drop unknown-user",
#         "snmp-server ifmib internal cache max-duration 4",
#         "snmp-server inform retries 7",
#         "snmp-server notification-log-mib size 5",
#         "snmp-server notification-log-mib GlobalSize 5",
#         "snmp-server trap throttle-time 12",
#         "snmp-server timeouts inQdrop 0",
#         "snmp-server timeouts duplicate 0",
#         "snmp-server traps addrpool low",
#         "snmp-server traps addrpool high",
#         "snmp-server traps bfd",
#         "snmp-server traps bgp cbgp2",
#         "snmp-server traps bulkstat collection",
#         "snmp-server traps bridgemib",
#         "snmp-server traps copy-complete",
#         "snmp-server traps cisco-entity-ext",
#         "snmp-server traps config",
#         "snmp-server traps hsrp",
#         "snmp-server traps ipsla",
#         "snmp-server traps ipsec tunnel start",
#         "snmp-server traps ipsec tunnel stop",
#         "snmp-server traps l2tun sessions",
#         "snmp-server traps l2tun tunnel-up",
#         "snmp-server traps l2tun tunnel-down",
#         "snmp-server traps l2vpn all",
#         "snmp-server traps l2vpn vc-up",
#         "snmp-server traps l2vpn vc-down",
#         "snmp-server traps msdp peer-state-change",
#         "snmp-server community test2 RO SDROwner IPv4 test IPv6 test1",
#         "snmp-server community-map cm1 context c1 security-name s1 target-list t1",
#         "snmp-server context c1",
#         "snmp-server context c2",
#         "snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2",
#         "snmp-server target list test2 vrf vrf2",
#         "snmp-server target list test host 1.1.1.2",
#         "snmp-server vrf vrf1",
#         "host 1.1.1.1 traps test1"
#
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:test2#show running-config snmp-server
# Mon Nov 29 12:49:29.521 UTC
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
#
#
# Using state: deleted
# Before state:
# -------------
# RP/0/RP0/CPU0:test2#show running-config snmp-server
# Mon Nov 29 12:49:29.521 UTC
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
# Deleted play:
# -------------
- name: Remove all existing configuration
  cisco.iosxr.iosxr_snmp_server:
    state: deleted
# Commands Fired:
# ---------------
# "commands": [
#        "no snmp-server chassis-id test2",
#         "no snmp-server correlator buffer-size 1024",
#         "no snmp-server contact t1",
#         "no snmp-server ipv4 dscp af11",
#         "no snmp-server ipv6 precedence routine",
#         "no snmp-server location test1",
#         "no snmp-server logging threshold oid-processing 1",
#         "no snmp-server logging threshold pdu-processing 1",
#         "no snmp-server mib bulkstat max-procmem-size 101",
#         "no snmp-server mroutemib send-all-vrf",
#         "no snmp-server overload-control 4 6",
#         "no snmp-server packetsize 490",
#         "no snmp-server queue-length 2",
#         "no snmp-server throttle-time 60",
#         "no snmp-server trap-source GigabitEthernet0/0/0/2",
#         "no snmp-server trap-timeout 3",
#         "no snmp-server drop report acl IPv4 test1",
#         "no snmp-server drop unknown-user",
#         "no snmp-server ifmib internal cache max-duration 4",
#         "no snmp-server inform retries 7",
#         "no snmp-server notification-log-mib size 5",
#         "no snmp-server notification-log-mib GlobalSize 5",
#         "no snmp-server trap throttle-time 12",
#         "no snmp-server timeouts inQdrop 0",
#         "no snmp-server timeouts duplicate 0",
#         "no snmp-server traps addrpool low",
#         "no snmp-server traps addrpool high",
#         "no snmp-server traps bfd",
#         "no snmp-server traps bgp cbgp2",
#         "no snmp-server traps bulkstat collection",
#         "no snmp-server traps bridgemib",
#         "no snmp-server traps copy-complete",
#         "no snmp-server traps cisco-entity-ext",
#         "no snmp-server traps config",
#         "no snmp-server traps hsrp",
#         "no snmp-server traps ipsla",
#         "no snmp-server traps ipsec tunnel start",
#         "no snmp-server traps ipsec tunnel stop",
#         "no snmp-server traps l2tun sessions",
#         "no snmp-server traps l2tun tunnel-up",
#         "no snmp-server traps l2tun tunnel-down",
#         "no snmp-server traps l2vpn all",
#         "no snmp-server traps l2vpn vc-up",
#         "no snmp-server traps l2vpn vc-down",
#         "no snmp-server traps msdp peer-state-change",
#         "no snmp-server community test2 RO SDROwner IPv4 test IPv6 test1",
#         "no snmp-server community-map cm1 context c1 security-name s1 target-list t1",
#         "no snmp-server context c1",
#         "no snmp-server context c2",
#         "no snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2",
#         "no snmp-server target list test host 1.1.1.2",
#         "no snmp-server target list test2 vrf vrf2",
#         "no snmp-server vrf vrf1"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Using state: overridden
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config snmp-server
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
# Overridden play:
# ----------------
- name: Override Snmp-server configuration with provided configuration
  cisco.iosxr.iosxr_snmp_server:
    config:
      timeouts:
        duplicate: 0
        inQdrop: 0
      trap:
        throttle_time: 13
      targets:
        - host: 1.1.1.2
          name: test
      ifmib:
        internal_cache_max_duration: 5
      inform:
        retries: 7
      chassis_id: test
      packetsize: 491
      queue_length: 2
      throttle_time: 60
      trap_source: GigabitEthernet0/0/0/2
      trap_timeout: 3
      context:
        - c1
        - c2
      contact: t1
      correlator:
        buffer_size: 1025
      communities:
        - name: test1
          ro: true
          sdrowner: true
          acl_v4: test
          acl_v6: test1
      community_maps:
        - name: cm2
          context: c1
          target_list: t1
          security_name: s1
      drop:
        report_IPv4: test2
        unknown_user: true
      ipv6:
        precedence: routine
      ipv4:
        dscp: af11
      location: test1
      logging_threshold_oid_processing: 2
      logging_threshold_pdu_processing: 2
      mib_bulkstat_max_procmem_size: 101
      mroutemib_send_all_vrf: true
      overload_control:
        overload_drop_time: 4
        overload_throttle_rate: 6
      notification_log_mib:
        GlobalSize: 5
        size: 5
      traps:
        hsrp: true
        ipsla: true
        ipsec:
          start: true
          stop: true
        bridgemib: true
        bulkstat_collection: true
        cisco_entity_ext: true
        config: true
        copy_complete: true
        l2vpn:
          all: true
          vc_down: true
          vc_up: true
        msdp_peer_state_change: true
    state: overridden

# Commands Fired:
# ---------------
# "commands": [
#        "no snmp-server traps addrpool low",
#         "no snmp-server traps addrpool high",
#         "no snmp-server traps bfd",
#         "no snmp-server traps bgp cbgp2",
#         "no snmp-server traps l2tun sessions",
#         "no snmp-server traps l2tun tunnel-up",
#         "no snmp-server traps l2tun tunnel-down",
#         "no snmp-server community test2 RO SDROwner IPv4 test IPv6 test1",
#         "no snmp-server community-map cm1 context c1 security-name s1 target-list t1",
#         "no snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2",
#         "no snmp-server vrf vrf1",
#         "snmp-server chassis-id test",
#         "snmp-server correlator buffer-size 1025",
#         "snmp-server logging threshold oid-processing 2",
#         "snmp-server logging threshold pdu-processing 2",
#         "snmp-server packetsize 491",
#         "snmp-server drop report acl IPv4 test2",
#         "snmp-server ifmib internal cache max-duration 5",
#         "snmp-server trap throttle-time 13",
#         "snmp-server community test1 RO SDROwner IPv4 test IPv6 test1",
#         "snmp-server community-map cm2 context c1 security-name s1 target-list t1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:test2#show running-config snmp-server
# Mon Nov 29 12:57:34.182 UTC
# snmp-server drop report acl IPv4 test2
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server community test1 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 13
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 2
# snmp-server logging threshold pdu-processing 2
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 491
# snmp-server correlator buffer-size 1025
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm2 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 5
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
#
# Using state: replaced
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config snmp-server
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
#
#
# Replaced play:
# ----------------
- name: Replace Snmp-server configuration with provided configuration
  cisco.iosxr.iosxr_snmp_server:
    state: replaced
    config:
      timeouts:
        duplicate: 0
        inQdrop: 0
      trap:
        throttle_time: 13
      targets:
        - host: 1.1.1.2
          name: test
      ifmib:
        internal_cache_max_duration: 5
      inform:
        retries: 7
      chassis_id: test
      packetsize: 491
      queue_length: 2
      throttle_time: 60
      trap_source: GigabitEthernet0/0/0/2
      trap_timeout: 3
      context:
        - c1
        - c2
      contact: t1
      correlator:
        buffer_size: 1025
      communities:
        - name: test1
          ro: true
          sdrowner: true
          acl_v4: test
          acl_v6: test1
      community_maps:
        - name: cm2
          context: c1
          target_list: t1
          security_name: s1
      drop:
        report_IPv4: test2
        unknown_user: true
      ipv6:
        precedence: routine
      ipv4:
        dscp: af11
      location: test1
      logging_threshold_oid_processing: 2
      logging_threshold_pdu_processing: 2
      mib_bulkstat_max_procmem_size: 101
      mroutemib_send_all_vrf: true
      overload_control:
        overload_drop_time: 4
        overload_throttle_rate: 6
      notification_log_mib:
        GlobalSize: 5
        size: 5
      traps:
        hsrp: true
        ipsla: true
        ipsec:
          start: true
          stop: true
        bridgemib: true
        bulkstat_collection: true
        cisco_entity_ext: true
        config: true
        copy_complete: true
        l2vpn:
          all: true
          vc_down: true
          vc_up: true
        msdp_peer_state_change: true

#
# Commands Fired:
# ---------------
# "commands": [
#         "no snmp-server traps addrpool low",
#         "no snmp-server traps addrpool high",
#         "no snmp-server traps bfd",
#         "no snmp-server traps bgp cbgp2",
#         "no snmp-server traps l2tun sessions",
#         "no snmp-server traps l2tun tunnel-up",
#         "no snmp-server traps l2tun tunnel-down",
#         "no snmp-server community test2 RO SDROwner IPv4 test IPv6 test1",
#         "no snmp-server community-map cm1 context c1 security-name s1 target-list t1",
#         "no snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2",
#         "no snmp-server vrf vrf1",
#         "snmp-server chassis-id test",
#         "snmp-server correlator buffer-size 1025",
#         "snmp-server logging threshold oid-processing 2",
#         "snmp-server logging threshold pdu-processing 2",
#         "snmp-server packetsize 491",
#         "snmp-server drop report acl IPv4 test2",
#         "snmp-server ifmib internal cache max-duration 5",
#         "snmp-server trap throttle-time 13",
#         "snmp-server community test1 RO SDROwner IPv4 test IPv6 test1",
#         "snmp-server community-map cm2 context c1 security-name s1 target-list t1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config snmp-server
# Mon Sep 13 10:38:22.690 UTC
# RP/0/0/CPU0:10#show running-config snmp-server
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
#
#
# Using state: gathered
# Before state:
# -------------
# RP/0/RP0/CPU0:test2#show running-config snmp-server
# Mon Nov 29 12:49:29.521 UTC
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
# Gathered play:
# --------------
- name: Gather listed snmp server
  cisco.iosxr.iosxr_snmp_server:
    state: gathered
# Module Execution Result:
# ------------------------
# "gathered": {
#         "chassis_id": "test2",
#         "communities": [
#             {
#                 "acl_v4": "test",
#                 "acl_v6": "test1",
#                 "name": "test2",
#                 "ro": true,
#                 "sdrowner": true
#             }
#         ],
#         "community_maps": [
#             {
#                 "context": "c1",
#                 "name": "cm1",
#                 "security_name": "s1",
#                 "target_list": "t1"
#             }
#         ],
#         "contact": "t1",
#         "context": [
#             "c1",
#             "c2"
#         ],
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "drop": {
#             "report_IPv4": "test1",
#             "unknown_user": true
#         },
#         "ifmib": {
#             "internal_cache_max_duration": 4
#         },
#         "inform": {
#             "retries": 7
#         },
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "location": "test1",
#         "logging_threshold_oid_processing": 1,
#         "logging_threshold_pdu_processing": 1,
#         "mib_bulkstat_max_procmem_size": 101,
#         "mroutemib_send_all_vrf": true,
#         "notification_log_mib": {
#             "GlobalSize": 5,
#             "size": 5
#         },
#         "overload_control": {
#             "overload_drop_time": 4,
#             "overload_throttle_rate": 6
#         },
#         "packetsize": 490,
#         "queue_length": 2,
#         "targets": [
#             {
#                 "host": "1.1.1.2",
#                 "name": "test"
#             },
#             {
#                 "name": "test2",
#                 "vrf": "vrf2"
#             }
#         ],
#         "throttle_time": 60,
#         "timeouts": {
#             "duplicate": 0,
#             "inQdrop": 0
#         },
#         "trap": {
#             "throttle_time": 12
#         },
#         "trap_source": "GigabitEthernet0/0/0/2",
#         "trap_timeout": 3,
#         "traps": {
#             "addrpool": {
#                 "high": true,
#                 "low": true
#             },
#             "bfd": true,
#             "bgp": {
#                 "cbgp2": true
#             },
#             "bridgemib": true,
#             "bulkstat_collection": true,
#             "cisco_entity_ext": true,
#             "config": true,
#             "copy_complete": true,
#             "hsrp": true,
#             "ipsec": {
#                 "start": true,
#                 "stop": true
#             },
#             "ipsla": true,
#             "l2tun": {
#                 "sessions": true,
#                 "tunnel_down": true,
#                 "tunnel_up": true
#             },
#             "l2vpn": {
#                 "all": true,
#                 "vc_down": true,
#                 "vc_up": true
#             },
#             "msdp_peer_state_change": true
#         },
#         "users": [
#             {
#                 "Ipv4_acl": "test1",
#                 "Ipv6_acl": "test2",
#                 "group": "test2",
#                 "user": "u1",
#                 "version": "v1"
#             }
#         ],
#         "vrfs": [
#             {
#                 "hosts": [
#                     {
#                         "community": "test1",
#                         "host": "1.1.1.1",
#                         "traps": true
#                     }
#                 ],
#                 "vrf": "vrf1"
#             }
#         ]
#     }
#
#
# Using state: rendered
# Rendered play:
# --------------
- name: >-
    Render platform specific configuration lines with state rendered (without
    connecting to the device)
  cisco.iosxr.iosxr_snmp_server:
    state: rendered
    config:
      vrfs:
        - hosts:
            - community: test1
              host: 1.1.1.1
              traps: true
          vrf: vrf1
      users:
        - Ipv4_acl: test1
          Ipv6_acl: test2
          group: test2
          user: u1
          version: v1
      timeouts:
        duplicate: 0
        inQdrop: 0
      trap:
        throttle_time: 12
      targets:
        - host: 1.1.1.2
          name: test
      ifmib:
        internal_cache_max_duration: 4
      inform:
        retries: 7
      chassis_id: test2
      packetsize: 490
      queue_length: 2
      throttle_time: 60
      trap_source: GigabitEthernet0/0/0/2
      trap_timeout: 3
      context:
        - c1
        - c2
      contact: t1
      correlator:
        buffer_size: 1024
      communities:
        - name: test2
          ro: true
          sdrowner: true
          acl_v4: test
          acl_v6: test1
      community_maps:
        - name: cm1
          context: c1
          target_list: t1
          security_name: s1
      drop:
        report_IPv4: test1
        unknown_user: true
      ipv6:
        precedence: routine
      ipv4:
        dscp: af11
      location: test1
      logging_threshold_oid_processing: 1
      logging_threshold_pdu_processing: 1
      mib_bulkstat_max_procmem_size: 101
      mroutemib_send_all_vrf: true
      overload_control:
        overload_drop_time: 4
        overload_throttle_rate: 6
      notification_log_mib:
        GlobalSize: 5
        size: 5
      traps:
        hsrp: true
        ipsla: true
        ipsec:
          start: true
          stop: true
        bridgemib: true
        bulkstat_collection: true
        cisco_entity_ext: true
        config: true
        copy_complete: true
        addrpool:
          high: true
          low: true
        bfd: true
        bgp:
          cbgp2: true
        l2tun:
          sessions: true
          tunnel_down: true
          tunnel_up: true
        l2vpn:
          all: true
          vc_down: true
          vc_up: true
        msdp_peer_state_change: true
  register: result

# Module Execution Result:
# ------------------------
# "rendered": [
#         "snmp-server chassis-id test2",
#         "snmp-server correlator buffer-size 1024",
#         "snmp-server contact t1",
#         "snmp-server ipv4 dscp af11",
#         "snmp-server ipv6 precedence routine",
#         "snmp-server location test1",
#         "snmp-server logging threshold oid-processing 1",
#         "snmp-server logging threshold pdu-processing 1",
#         "snmp-server mib bulkstat max-procmem-size 101",
#         "snmp-server mroutemib send-all-vrf",
#         "snmp-server overload-control 4 6",
#         "snmp-server packetsize 490",
#         "snmp-server queue-length 2",
#         "snmp-server throttle-time 60",
#         "snmp-server trap-source GigabitEthernet0/0/0/2",
#         "snmp-server trap-timeout 3",
#         "snmp-server drop report acl IPv4 test1",
#         "snmp-server drop unknown-user",
#         "snmp-server ifmib internal cache max-duration 4",
#         "snmp-server inform retries 7",
#         "snmp-server notification-log-mib size 5",
#         "snmp-server notification-log-mib GlobalSize 5",
#         "snmp-server trap throttle-time 12",
#         "snmp-server timeouts inQdrop 0",
#         "snmp-server timeouts duplicate 0",
#         "snmp-server traps addrpool low",
#         "snmp-server traps addrpool high",
#         "snmp-server traps bfd",
#         "snmp-server traps bgp cbgp2",
#         "snmp-server traps bulkstat collection",
#         "snmp-server traps bridgemib",
#         "snmp-server traps copy-complete",
#         "snmp-server traps cisco-entity-ext",
#         "snmp-server traps config",
#         "snmp-server traps hsrp",
#         "snmp-server traps ipsla",
#         "snmp-server traps ipsec tunnel start",
#         "snmp-server traps ipsec tunnel stop",
#         "snmp-server traps l2tun sessions",
#         "snmp-server traps l2tun tunnel-up",
#         "snmp-server traps l2tun tunnel-down",
#         "snmp-server traps l2vpn all",
#         "snmp-server traps l2vpn vc-up",
#         "snmp-server traps l2vpn vc-down",
#         "snmp-server traps msdp peer-state-change",
#         "snmp-server community test2 RO SDROwner IPv4 test IPv6 test1",
#         "snmp-server community-map cm1 context c1 security-name s1 target-list t1",
#         "snmp-server context c1",
#         "snmp-server context c2",
#         "snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2",
#         "snmp-server target list test2 vrf vrf2",
#         "snmp-server target list test host 1.1.1.2",
#         "snmp-server vrf vrf1",
#         "host 1.1.1.1 traps test1"
#     ],
# Using state: parsed
# File: parsed.cfg
# ----------------
# snmp-server vrf vrf1
#  host 1.1.1.1 traps test1
# !
# snmp-server drop report acl IPv4 test1
# snmp-server drop unknown-user
# snmp-server ipv4 dscp af11
# snmp-server ipv6 precedence routine
# snmp-server user u1 test2 v1 IPv4 test1 IPv6 test2
# snmp-server community test2 RO SDROwner IPv4 test IPv6 test1
# snmp-server queue-length 2
# snmp-server trap-timeout 3
# snmp-server trap throttle-time 12
# snmp-server traps bfd
# snmp-server traps bgp cbgp2
# snmp-server traps copy-complete
# snmp-server traps hsrp
# snmp-server traps ipsla
# snmp-server traps msdp peer-state-change
# snmp-server traps ipsec tunnel stop
# snmp-server traps ipsec tunnel start
# snmp-server traps config
# snmp-server traps l2tun sessions
# snmp-server traps l2tun tunnel-up
# snmp-server traps l2tun tunnel-down
# snmp-server traps bulkstat collection
# snmp-server traps l2vpn all
# snmp-server traps l2vpn vc-up
# snmp-server traps l2vpn vc-down
# snmp-server traps bridgemib
# snmp-server traps addrpool low
# snmp-server traps addrpool high
# snmp-server traps cisco-entity-ext
# snmp-server chassis-id test2
# snmp-server contact t1
# snmp-server location test1
# snmp-server target list test host 1.1.1.2
# snmp-server target list test2 vrf vrf2
# snmp-server context c1
# snmp-server context c2
# snmp-server logging threshold oid-processing 1
# snmp-server logging threshold pdu-processing 1
# snmp-server mib bulkstat max-procmem-size 101
# snmp-server timeouts duplicate 0
# snmp-server timeouts inQdrop 0
# snmp-server packetsize 490
# snmp-server correlator buffer-size 1024
# snmp-server trap-source GigabitEthernet0/0/0/2
# snmp-server throttle-time 60
# snmp-server community-map cm1 context c1 security-name s1 target-list t1
# snmp-server inform retries 7
# snmp-server overload-control 4 6
# snmp-server ifmib internal cache max-duration 4
# snmp-server mroutemib send-all-vrf
# snmp-server notification-log-mib size 5
# snmp-server notification-log-mib GlobalSize 5
# ------------
- name: Parse the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_snmp_server:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed
# Module Execution Result:
# ------------------------
# "parsed":{
#         "chassis_id": "test2",
#         "communities": [
#             {
#                 "acl_v4": "test",
#                 "acl_v6": "test1",
#                 "name": "test2",
#                 "ro": true,
#                 "sdrowner": true
#             }
#         ],
#         "community_maps": [
#             {
#                 "context": "c1",
#                 "name": "cm1",
#                 "security_name": "s1",
#                 "target_list": "t1"
#             }
#         ],
#         "contact": "t1",
#         "context": [
#             "c1",
#             "c2"
#         ],
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "drop": {
#             "report_IPv4": "test1",
#             "unknown_user": true
#         },
#         "ifmib": {
#             "internal_cache_max_duration": 4
#         },
#         "inform": {
#             "retries": 7
#         },
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "location": "test1",
#         "logging_threshold_oid_processing": 1,
#         "logging_threshold_pdu_processing": 1,
#         "mib_bulkstat_max_procmem_size": 101,
#         "mroutemib_send_all_vrf": true,
#         "notification_log_mib": {
#             "GlobalSize": 5,
#             "size": 5
#         },
#         "overload_control": {
#             "overload_drop_time": 4,
#             "overload_throttle_rate": 6
#         },
#         "packetsize": 490,
#         "queue_length": 2,
#         "targets": [
#             {
#                 "host": "1.1.1.2",
#                 "name": "test"
#             },
#             {
#                 "name": "test2",
#                 "vrf": "vrf2"
#             }
#         ],
#         "throttle_time": 60,
#         "timeouts": {
#             "duplicate": 0,
#             "inQdrop": 0
#         },
#         "trap": {
#             "throttle_time": 12
#         },
#         "trap_source": "GigabitEthernet0/0/0/2",
#         "trap_timeout": 3,
#         "traps": {
#             "addrpool": {
#                 "high": true,
#                 "low": true
#             },
#             "bfd": true,
#             "bgp": {
#                 "cbgp2": true
#             },
#             "bridgemib": true,
#             "bulkstat_collection": true,
#             "cisco_entity_ext": true,
#             "config": true,
#             "copy_complete": true,
#             "hsrp": true,
#             "ipsec": {
#                 "start": true,
#                 "stop": true
#             },
#             "ipsla": true,
#             "l2tun": {
#                 "sessions": true,
#                 "tunnel_down": true,
#                 "tunnel_up": true
#             },
#             "l2vpn": {
#                 "all": true,
#                 "vc_down": true,
#                 "vc_up": true
#             },
#             "msdp_peer_state_change": true
#         },
#         "users": [
#             {
#                 "Ipv4_acl": "test1",
#                 "Ipv6_acl": "test2",
#                 "group": "test2",
#                 "user": "u1",
#                 "version": "v1"
#             }
#         ],
#         "vrfs": [
#             {
#                 "hosts": [
#                     {
#                         "community": "test1",
#                         "host": "1.1.1.1",
#                         "traps": true
#                     }
#                 ],
#                 "vrf": "vrf1"
#             }
#         ]
#     }

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: `"This output will always be in the same format as the module argspec.\n"`
before dictionary	The configuration prior to the module execution. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `"This output will always be in the same format as the module argspec.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `["sample command 1", "sample command 2", "sample command 3"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["sample command 1", "sample command 2", "sample command 3"]`

Authors

Ashwini Mhatre (@amhatre)

cisco.iosxr.iosxr_snmp_server module – Resource module to configure snmp server.

Synopsis

Parameters

Notes

Examples

Return Values