cisco.nxos.nxos_bgp_address_family module – BGP Address Family resource module.

Note

This module is part of the cisco.nxos collection (version 5.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bgp_address_family.

New in cisco.nxos 2.0.0

Synopsis 

This module manages BGP Address Family configuration on devices running Cisco NX-OS.

Note

This module has a corresponding action plugin.

Aliases: bgp_address_family

Parameters 

Parameter	Comments
config dictionary	A list of BGP process configuration.
address_family list / elements=dictionary	Address Family related configurations.
additional_paths dictionary	Additional paths configuration.
install_backup boolean	Install backup path. Choices: `false` `true`
receive boolean	Additional paths Receive capability. Choices: `false` `true`
selection dictionary	Additional paths selection
route_map string	Route-map for additional paths selection
send boolean	Additional paths Send capability Choices: `false` `true`
advertise_l2vpn_evpn boolean	Enable advertising EVPN routes. Choices: `false` `true`
advertise_pip boolean	Advertise physical ip for type-5 route. Choices: `false` `true`
advertise_system_mac boolean	Advertise extra EVPN RT-2 with system MAC. Choices: `false` `true`
afi string / required	Address Family indicator. Choices: `"ipv4"` `"ipv6"` `"link-state"` `"vpnv4"` `"vpnv6"` `"l2vpn"`
aggregate_address list / elements=dictionary	Configure BGP aggregate prefixes
advertise_map string	Select attribute information from specific routes.
as_set boolean	Generate AS-SET information. Choices: `false` `true`
attribute_map string	Set attribute information of aggregate.
prefix string	Aggregate prefix.
summary_only boolean	Do not advertise more specifics. Choices: `false` `true`
suppress_map string	Conditionally filter more specific routes.
allow_vni_in_ethertag boolean	Allow VNI in Ethernet Tag field in EVPN route. Choices: `false` `true`
client_to_client dictionary	Configure client-to-client route reflection.
no_reflection boolean	Reflection of routes permitted. Choices: `false` `true`
dampen_igp_metric integer	Dampen IGP metric-related changes.
dampening dictionary	Configure route flap dampening.
decay_half_life integer	Decay half life.
max_suppress_time integer	Maximum suppress time for stable route.
route_map string	Apply route-map to specify dampening criteria.
set boolean	Set route flap dampening. Choices: `false` `true`
start_reuse_route integer	Value to start reusing a route.
start_suppress_route integer	Value to start suppressing a route.
default_information dictionary	Control distribution of default information.
originate boolean	Distribute a default route. Choices: `false` `true`
default_metric integer	Set metric of redistributed routes.
distance dictionary	Configure administrative distance.
ebgp_routes integer	Distance for EBGP routes.
ibgp_routes integer	Distance for IBGP routes.
local_routes integer	Distance for local routes.
export_gateway_ip boolean	Export Gateway IP to Type-5 EVPN routes for VRF Choices: `false` `true`
inject_map list / elements=dictionary	Routemap which specifies prefixes to inject.
copy_attributes boolean	Copy attributes from aggregate. Choices: `false` `true`
exist_map string	Routemap which specifies exist condition.
route_map string	Route-map name.
maximum_paths dictionary	Forward packets over multipath paths.
eibgp dictionary	Configure multipath for both EBGP and IBGP paths.
parallel_paths integer	Number of parallel paths.
ibgp dictionary	Configure multipath for IBGP paths.
parallel_paths integer	Number of parallel paths.
local dictionary	Configure multipath for local paths.
parallel_paths integer	Number of parallel paths.
mixed dictionary	Configure multipath for local and remote paths.
parallel_paths integer	Number of parallel paths.
parallel_paths integer	Number of parallel paths.
networks list / elements=dictionary	Configure an IP prefix to advertise.
prefix string	IP prefix in CIDR format.
route_map string	Route-map name.
nexthop dictionary	Nexthop tracking.
route_map string	Route-map name.
trigger_delay dictionary	Set the delay to trigger nexthop tracking.
critical_delay integer	Nexthop changes affecting reachability. Delay value (miliseconds).
non_critical_delay integer	Other nexthop changes. Delay value (miliseconds).
redistribute list / elements=dictionary	Configure redistribution.
id string	The identifier for the protocol specified.
protocol string / required	The name of the protocol. Choices: `"am"` `"direct"` `"eigrp"` `"isis"` `"lisp"` `"ospf"` `"ospfv3"` `"rip"` `"static"` `"hmm"`
route_map string / required	The route map policy to constrain redistribution.
retain dictionary	Retain the routes based on Target VPN Extended Communities.
route_target dictionary	Specify Target VPN Extended Communities
retain_all boolean	All the routes regardless of Target-VPN community Choices: `false` `true`
route_map string	Apply route-map to filter routes.
safi string	Sub Address Family indicator. Choices: `"unicast"` `"multicast"` `"mvpn"` `"evpn"`
suppress_inactive boolean	Advertise only active routes to peers. Choices: `false` `true`
table_map dictionary	Policy for filtering/modifying OSPF routes before sending them to RIB.
filter boolean	Block the OSPF routes from being sent to RIB. Choices: `false` `true`
name string / required	The Route Map name.
timers dictionary	Configure bgp related timers.
bestpath_defer dictionary	Configure bestpath defer timer value for batch prefix processing.
defer_time integer	Bestpath defer time (mseconds).
maximum_defer_time integer	Maximum bestpath defer time (mseconds).
vrf string	Virtual Router Context.
wait_igp_convergence boolean	Delay initial bestpath until redistributed IGPs have converged. Choices: `false` `true`
as_number string	Autonomous System Number of the router.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config \| section ‘^router bgp’. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Refer to examples for more details. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"parsed"` `"gathered"` `"rendered"`

Notes 

Note

Tested against NX-OS 9.3.6.
Unsupported for Cisco MDS
For managing BGP neighbor address family configurations please use the cisco.nxos.nxos_bgp_neighbor_address_family module.
This module works with connection network_cli and httpapi.

Examples 

# Using merged

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# Nexus9000v#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_bgp_address_family:
    config:
      as_number: 65536
      address_family:
        - afi: ipv4
          safi: multicast
          networks:
            - prefix: 192.0.2.32/27
            - prefix: 192.0.2.64/27
              route_map: rmap1
          nexthop:
            route_map: rmap2
            trigger_delay:
              critical_delay: 120
              non_critical_delay: 180
        - afi: ipv4
          safi: unicast
          vrf: site-1
          default_information:
            originate: True
          aggregate_address:
            - prefix: 203.0.113.0/24
              as_set: True
              summary_only: True
        - afi: ipv6
          safi: multicast
          vrf: site-1
          redistribute:
            - protocol: ospfv3
              id: 100
              route_map: rmap-ospf-1
            - protocol: eigrp
              id: 101
              route_map: rmap-eigrp-1

# Task output:
# ------------
#  before: {}
#
#  commands:
#  - router bgp 65536
#  - address-family ipv4 multicast
#  - nexthop route-map rmap2
#  - nexthop trigger-delay critical 120 non-critical 180
#  - network 192.0.2.32/27
#  - network 192.0.2.64/27 route-map rmap1
#  - vrf site-1
#  - address-family ipv4 unicast
#  - default-information originate
#  - aggregate-address 203.0.113.0/24 as-set summary-only
#  - address-family ipv6 multicast
#  - redistribute ospfv3 100 route-map rmap-ospf-1
#  - redistribute eigrp 101 route-map rmap-eigrp-1
#
#  after:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.32/27
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - id: "100"
#            protocol: ospfv3
#            route_map: rmap-ospf-1
#          - id: "101"
#            protocol: eigrp
#            route_map: rmap-eigrp-1

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.32/27
#     network 192.0.2.64/27 route-map rmap1
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#       aggregate-address 203.0.113.0/24 as-set summary-only
#     address-family ipv6 multicast
#       redistribute ospfv3 100 route-map rmap-ospf-1
#       redistribute eigrp 101 route-map rmap-eigrp-1
#

# Using replaced

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.32/27
#     network 192.0.2.64/27 route-map rmap1
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#       aggregate-address 203.0.113.0/24 as-set summary-only
#     address-family ipv6 multicast
#       redistribute ospfv3 100 route-map rmap-ospf-1
#       redistribute eigrp 101 route-map rmap-eigrp-1

- name: Replace configuration of specified AFs
  cisco.nxos.nxos_bgp_address_family:
    config:
      as_number: 65536
      address_family:
        - afi: ipv4
          safi: multicast
          networks:
            - prefix: 192.0.2.64/27
              route_map: rmap1
          nexthop:
            route_map: rmap2
            trigger_delay:
              critical_delay: 120
              non_critical_delay: 180
          aggregate_address:
            - prefix: 203.0.113.0/24
              as_set: True
              summary_only: True
        - afi: ipv4
          safi: unicast
          vrf: site-1
    state: replaced

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.32/27
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - id: "100"
#            protocol: ospfv3
#            route_map: rmap-ospf-1
#          - id: "101"
#            protocol: eigrp
#            route_map: rmap-eigrp-1
#
#  commands:
#  - router bgp 65536
#  - address-family ipv4 multicast
#  - no network 192.0.2.32/27
#  - aggregate-address 203.0.113.0/24 as-set summary-only
#  - vrf site-1
#  - address-family ipv4 unicast
#  - no default-information originate
#  - no aggregate-address 203.0.113.0/24 as-set summary-only
#
#  after:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - protocol: ospfv3
#            id: "100"
#            route_map: rmap-ospf-1
#          - protocol: eigrp
#            id: "101"
#            route_map: rmap-eigrp-1

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.64/27 route-map rmap1
#     aggregate-address 203.0.113.0/24 as-set summary-only
#   vrf site-1
#     address-family ipv4 unicast
#     address-family ipv6 multicast
#       redistribute ospfv3 100 route-map rmap-ospf-1
#       redistribute eigrp 101 route-map rmap-eigrp-1

# Using overridden

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.32/27
#     network 192.0.2.64/27 route-map rmap1
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#       aggregate-address 203.0.113.0/24 as-set summary-only
#     address-family ipv6 multicast
#       redistribute ospfv3 100 route-map rmap-ospf-1
#       redistribute eigrp 101 route-map rmap-eigrp-1

- name: Override all BGP AF configuration with provided configuration
  cisco.nxos.nxos_bgp_address_family: &overridden
    config:
      as_number: 65536
      address_family:
        - afi: ipv4
          safi: multicast
          networks:
            - prefix: 192.0.2.64/27
              route_map: rmap1
          aggregate_address:
            - prefix: 203.0.113.0/24
              as_set: True
              summary_only: True
        - afi: ipv4
          safi: unicast
          vrf: site-1
    state: overridden

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.32/27
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - id: "100"
#            protocol: ospfv3
#            route_map: rmap-ospf-1
#          - id: "101"
#            protocol: eigrp
#            route_map: rmap-eigrp-1
#
#  commands:
#  - router bgp 65536
#  - vrf site-1
#  - no address-family ipv6 multicast
#  - exit
#  - address-family ipv4 multicast
#  - no nexthop route-map rmap2
#  - no nexthop trigger-delay critical 120 non-critical 180
#  - aggregate-address 203.0.113.0/24 as-set summary-only
#  - no network 192.0.2.32/27
#  - vrf site-1
#  - address-family ipv4 unicast
#  - no default-information originate
#  - no aggregate-address 203.0.113.0/24 as-set summary-only
#
#  after:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1

#
# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     network 192.0.2.64/27 route-map rmap1
#     aggregate-address 203.0.113.0/24 as-set summary-only
#   vrf site-1
#     address-family ipv4 unicast
#

# Using deleted to remove specified AFs

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.32/27
#     network 192.0.2.64/27 route-map rmap1
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#       aggregate-address 203.0.113.0/24 as-set summary-only
#     address-family ipv6 multicast
#       redistribute ospfv3 100 route-map rmap-ospf-1
#       redistribute eigrp 101 route-map rmap-eigrp-1

- name: Delete specified BGP AFs
  cisco.nxos.nxos_bgp_address_family:
    config:
      as_number: 65536
      address_family:
        - afi: ipv4
          safi: multicast
        - vrf: site-1
          afi: ipv6
          safi: multicast
    state: deleted

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.32/27
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - id: "100"
#            protocol: ospfv3
#            route_map: rmap-ospf-1
#          - id: "101"
#            protocol: eigrp
#            route_map: rmap-eigrp-1
#
#  commands:
#  - router bgp 65563
#  - no address-family ipv4 multicast
#  - vrf site-1
#  - no address-family ipv6 multicast
#
#  after:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#       aggregate-address 203.0.113.0/24 as-set summary-only

# Using deleted to remove all BGP AFs

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.32/27
#     network 192.0.2.64/27 route-map rmap1
#   vrf site-1
#     address-family ipv4 unicast
#       default-information originate
#       aggregate-address 203.0.113.0/24 as-set summary-only
#     address-family ipv6 multicast
#       redistribute ospfv3 100 route-map rmap-ospf-1
#       redistribute eigrp 101 route-map rmap-eigrp-1

- name: Delete all BGP AFs
  cisco.nxos.nxos_bgp_address_family:
    state: deleted

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.32/27
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - id: "100"
#            protocol: ospfv3
#            route_map: rmap-ospf-1
#          - id: "101"
#            protocol: eigrp
#            route_map: rmap-eigrp-1
#
#  commands:
#  - router bgp 65563
#  - no address-family ipv4 multicast
#  - vrf site-1
#  - no address-family ipv4 unicast
#  - no address-family ipv6 multicast
#
#  after:
#    as_number: "65536"

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
# Nexus9000v#

# Using rendered

- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.nxos.nxos_bgp_address_family:
    config:
      as_number: 65536
      address_family:
        - afi: ipv4
          safi: multicast
          networks:
            - prefix: 192.0.2.32/27
            - prefix: 192.0.2.64/27
              route_map: rmap1
          nexthop:
            route_map: rmap2
            trigger_delay:
              critical_delay: 120
              non_critical_delay: 180
        - afi: ipv4
          safi: unicast
          vrf: site-1
          default_information:
            originate: True
          aggregate_address:
            - prefix: 203.0.113.0/24
              as_set: True
              summary_only: True
        - afi: ipv6
          safi: multicast
          vrf: site-1
          redistribute:
            - protocol: ospfv3
              id: 100
              route_map: rmap-ospf-1
            - protocol: eigrp
              id: 101
              route_map: rmap-eigrp-1
    state: rendered

# Task Output:
# ------------
# rendered:
# - router bgp 65536
# - address-family ipv4 multicast
# - nexthop route-map rmap2
# - nexthop trigger-delay critical 120 non-critical 180
# - network 192.0.2.32/27
# - network 192.0.2.64/27 route-map rmap1
# - vrf site-1
# - address-family ipv4 unicast
# - default-information originate
# - aggregate-address 203.0.113.0/24 as-set summary-only
# - address-family ipv6 multicast
# - redistribute ospfv3 100 route-map rmap-ospf-1
# - redistribute eigrp 101 route-map rmap-eigrp-1

# Using parsed

# parsed.cfg
# ------------
# router bgp 65536
#   address-family ipv4 multicast
#     nexthop route-map rmap2
#     nexthop trigger-delay critical 120 non-critical 180
#     network 192.0.2.32/27
#    network 192.0.2.64/27 route-map rmap1
#  vrf site-1
#    address-family ipv4 unicast
#      default-information originate
#      aggregate-address 203.0.113.0/24 as-set summary-only
#    address-family ipv6 multicast
#      redistribute ospfv3 100 route-map rmap-ospf-1
#      redistribute eigrp 101 route-map rmap-eigrp-1

- name: Parse externally provided BGP AF config
  cisco.nxos.nxos_bgp_address_family:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output:
# ------------
#  parsed:
#    as_number: "65536"
#    address_family:
#      - afi: ipv4
#        safi: multicast
#        networks:
#          - prefix: 192.0.2.32/27
#          - prefix: 192.0.2.64/27
#            route_map: rmap1
#        nexthop:
#          route_map: rmap2
#          trigger_delay:
#            critical_delay: 120
#            non_critical_delay: 180
#      - afi: ipv4
#        safi: unicast
#        vrf: site-1
#        default_information:
#          originate: True
#        aggregate_address:
#          - prefix: 203.0.113.0/24
#            as_set: True
#            summary_only: True
#      - afi: ipv6
#        safi: multicast
#        vrf: site-1
#        redistribute:
#          - id: "100"
#            protocol: ospfv3
#            route_map: rmap-ospf-1
#          - id: "101"
#            protocol: eigrp
#            route_map: rmap-eigrp-1

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: `"This output will always be in the same format as the module argspec.\n"`
before dictionary	The configuration prior to the module execution. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `"This output will always be in the same format as the module argspec.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `["router bgp 65536", "address-family ipv4 multicast", "nexthop route-map rmap2"]`
gathered dictionary	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `"This output will always be in the same format as the module argspec.\n"`
parsed dictionary	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `"This output will always be in the same format as the module argspec.\n"`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["router bgp 65536", "address-family ipv4 multicast", "nexthop route-map rmap2"]`

Authors

Nilashish Chakraborty (@NilashishC)

cisco.nxos.nxos_bgp_address_family module – BGP Address Family resource module.

Synopsis

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 

Return Values 