cisco.nxos.nxos_hsrp module – Manages HSRP configuration on NX-OS switches.

Note

This module is part of the cisco.nxos collection (version 5.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_hsrp.

New in cisco.nxos 1.0.0

Synopsis

  • Manages HSRP configuration on NX-OS switches.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

auth_string

string

Authentication string. If this needs to be hidden(for md5 type), the string should be 7 followed by the key string. Otherwise, it can be 0 followed by key string or just key string (for backward compatibility). For text type, this should be just be a key string. if this is ‘default’, authentication is removed.

auth_type

string

Authentication type.

Choices:

  • "text"

  • "md5"

group

string / required

HSRP group number.

interface

string / required

Full name of interface that is being managed for HSRP.

preempt

string

Enable/Disable preempt.

Choices:

  • "enabled"

  • "disabled"

priority

string

HSRP priority or keyword ‘default’.

state

string

Specify desired state of the resource.

Choices:

  • "present" ← (default)

  • "absent"

version

string

HSRP version.

Choices:

  • "1" ← (default)

  • "2"

vip

string

HSRP virtual IP address or keyword ‘default’

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL

  • Unsupported for Cisco MDS

  • HSRP feature needs to be enabled first on the system.

  • SVIs must exist before using this module.

  • Interface must be a L3 port before using this module.

  • HSRP cannot be configured on loopback interfaces.

  • MD5 authentication is only possible with HSRPv2 while it is ignored if HSRPv1 is used instead, while it will not raise any error. Here we allow MD5 authentication only with HSRPv2 in order to enforce better practice.

  • For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`

  • For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`

  • For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.

Examples

- name: Ensure HSRP is configured with following params on a SVI
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled

- name: Ensure HSRP is configured with following params on a SVI with clear text authentication
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    auth_type: text
    auth_string: CISCO

- name: Ensure HSRP is configured with md5 authentication and clear authentication
    string
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    auth_type: md5
    auth_string: 0 1234

- name: Ensure HSRP is configured with md5 authentication and hidden authentication
    string
  cisco.nxos.nxos_hsrp:
    group: 10
    vip: 10.1.1.1
    priority: 150
    interface: vlan10
    preempt: enabled
    auth_type: md5
    auth_string: 7 1234

- name: Remove HSRP config for given interface, group, and VIP
  cisco.nxos.nxos_hsrp:
    group: 10
    interface: vlan10
    vip: 10.1.1.1
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

commands sent to the device

Returned: always

Sample: ["interface vlan10", "hsrp version 2", "hsrp 30", "ip 10.30.1.1"]

Authors

  • Jason Edelman (@jedelman8)

  • Gabriele Gerbino (@GGabriele)