community.aws.ec2_vpc_vpn module – Create, modify, and delete EC2 VPN connections
Note
This module is part of the community.aws collection (version 7.2.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.aws.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.ec2_vpc_vpn.
New in community.aws 1.0.0
Synopsis
This module creates, modifies, and deletes VPN connections. Idempotence is achieved by using the filters option or specifying the VPN connection identifier.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.26.0
botocore >= 1.29.0
Parameters
Parameter |
Comments |
|---|---|
AWS access key ID. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The aws_access_key and profile options are mutually exclusive. The aws_access_key_id alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_access_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
The location of a CA Bundle to use when validating SSL certificates. The |
|
A dictionary to modify the botocore configuration. Parameters can be found in the AWS documentation https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. |
|
The type of VPN connection. At this time only Default: |
|
The ID of the customer gateway. |
|
Use a The Choices:
|
|
The time, in seconds, to wait before checking operation again. Default: |
|
URL to connect to instead of the default AWS endpoints. While this can be used to connection to other AWS-compatible services the amazon.aws and community.aws collections are only tested against AWS. The The ec2_url and s3_url aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
An alternative to using vpn_connection_id. If multiple matches are found, vpn_connection_id is required. If one of the following suboptions is a list of items to filter by, only one item needs to match to find the VPN that correlates. e.g. if the filter cidr is Default: |
|
The BGP ASN number associated with a BGP device. Only works if the connection is attached. This filtering option is currently not working. |
|
The customer gateway id as a string or a list of those strings. |
|
The customer gateway configuration of the VPN as a string (in the format of the return value) or a list of those strings. |
|
The destination cidr of the VPN’s route as a string or a list of those strings. |
|
The type of routing; |
|
The key of a tag as a string or a list of those strings. |
|
The value of a tag as a string or a list of those strings. |
|
A dict of key value pairs. |
|
The virtual private gateway as a string or a list of those strings. |
|
The VPN connection id as a string or a list of those strings. |
|
A named AWS profile to use for authentication. See the AWS documentation for more information about named profiles https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html. The The profile option is mutually exclusive with the aws_access_key, aws_secret_key and security_token options. |
|
Whether or not to delete VPN connections routes that are not specified in the task. Choices:
|
|
If purge_tags=true and tags is set, existing tags will be purged from the resource to match exactly what is defined by tags parameter. If the tags parameter is not set then tags will not be modified, even if purge_tags=True. Tag keys beginning with Choices:
|
|
The AWS region to use. For global services such as IAM, Route53 and CloudFront, region is ignored. The See the Amazon AWS documentation for more information http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region. The Support for the |
|
Routes to add to the connection. Default: |
|
AWS secret access key. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The secret_key and profile options are mutually exclusive. The aws_secret_access_key alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_secret_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
AWS STS session token for use with temporary credentials. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The security_token and profile options are mutually exclusive. Aliases aws_session_token and session_token were added in release 3.2.0, with the parameter being renamed from security_token to session_token in release 6.0.0. The security_token, aws_security_token, and access_token aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
The desired state of the VPN connection. Choices:
|
|
Indicates whether the VPN connection uses static routes only. Static routes must be used for devices that don’t support BGP. Choices:
|
|
A dictionary representing the tags to be applied to the resource. If the tags parameter is not set then tags will not be modified. |
|
The ID of the transit gateway. Mutually exclusive with vpn_gateway_id. |
|
An optional list object containing no more than two dict members, each of which may contain TunnelInsideCidr and/or PreSharedKey keys with appropriate string values. AWS defaults will apply in absence of either of the aforementioned keys. Default: |
|
The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and customer gateway. |
|
The range of inside IP addresses for the tunnel. |
|
When set to Setting validate_certs=false is strongly discouraged, as an alternative, consider setting aws_ca_bundle instead. Choices:
|
|
The ID of the VPN connection. Required to modify or delete a connection if the filters option does not provide a unique match. |
|
The ID of the virtual private gateway. Mutually exclusive with transit_gateway_id. |
|
How long, in seconds, before wait gives up. Default: |
Notes
Note
Caution: For modules, environment variables and configuration files are read from the Ansible ‘host’ context and not the ‘controller’ context. As such, files may need to be explicitly copied to the ‘host’. For lookup and connection plugins, environment variables and configuration files are read from the Ansible ‘controller’ context and not the ‘host’ context.
The AWS SDK (boto3) that Ansible uses may also read defaults for credentials and other settings, such as the region, from its configuration files in the Ansible ‘host’ context (typically
~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.
Examples
# Note: These examples do not set authentication details, see the AWS Guide for details.
- name: create a VPN connection with vpn_gateway_id
community.aws.ec2_vpc_vpn:
state: present
vpn_gateway_id: vgw-XXXXXXXX
customer_gateway_id: cgw-XXXXXXXX
- name: Attach a vpn connection to transit gateway
community.aws.ec2_vpc_vpn:
state: present
transit_gateway_id: tgw-XXXXXXXX
customer_gateway_id: cgw-XXXXXXXX
- name: modify VPN connection tags
community.aws.ec2_vpc_vpn:
state: present
vpn_connection_id: vpn-XXXXXXXX
tags:
Name: ansible-tag-1
Other: ansible-tag-2
- name: delete a connection
community.aws.ec2_vpc_vpn:
vpn_connection_id: vpn-XXXXXXXX
state: absent
- name: modify VPN tags (identifying VPN by filters)
community.aws.ec2_vpc_vpn:
state: present
filters:
cidr: 194.168.1.0/24
tag-keys:
- Ansible
- Other
tags:
New: Tag
purge_tags: true
static_only: true
- name: set up VPN with tunnel options utilizing 'TunnelInsideCidr' only
community.aws.ec2_vpc_vpn:
state: present
filters:
vpn: vpn-XXXXXXXX
static_only: true
tunnel_options:
-
TunnelInsideCidr: '169.254.100.1/30'
-
TunnelInsideCidr: '169.254.100.5/30'
- name: add routes and remove any preexisting ones
community.aws.ec2_vpc_vpn:
state: present
filters:
vpn: vpn-XXXXXXXX
routes:
- 195.168.2.0/24
- 196.168.2.0/24
purge_routes: true
- name: remove all routes
community.aws.ec2_vpc_vpn:
state: present
vpn_connection_id: vpn-XXXXXXXX
routes: []
purge_routes: true
- name: delete a VPN identified by filters
community.aws.ec2_vpc_vpn:
state: absent
filters:
tags:
Ansible: Tag
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
If the VPN connection has changed. Returned: always Sample: |
|
The configuration of the VPN connection. Returned: state=present |
|
The customer gateway connected via the connection. Returned: state=present Sample: |
|
The VPN connection options (currently only containing static_routes_only). Returned: state=present |
|
If the VPN connection only allows static routes. Returned: state=present Sample: |
|
The routes of the VPN connection. Returned: state=present Sample: |
|
The status of the VPN connection. Returned: state=present Sample: |
|
The tags associated with the connection. Returned: state=present Sample: |
|
The transit gateway id to which the vpn connection can be attached. Returned: state=present Sample: |
|
The type of VPN connection (currently only ipsec.1 is available). Returned: state=present Sample: |
|
The telemetry for the VPN tunnel. Returned: state=present Sample: |
|
The identifier for the VPN connection. Returned: state=present Sample: |
|
The virtual private gateway connected via the connection. Returned: state=present Sample: |