community.crypto.x509_crl module – Generate Certificate Revocation Lists (CRLs)

Note

This module is part of the community.crypto collection (version 2.22.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.crypto. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.crypto.x509_crl.

New in community.crypto 1.0.0

Synopsis 

This module allows one to (re)generate or update Certificate Revocation Lists (CRLs).
Certificates on the revocation list can be either specified by serial number and (optionally) their issuer, or as a path to a certificate file in PEM format.

Requirements 

The below requirements are needed on the host that executes this module.

If name_encoding is set to another value than ignore, the idna Python library needs to be installed.
cryptography >= 1.2

Parameters 

Parameter	Comments
attributes aliases: attr string	The attributes the resulting filesystem object should have. To get supported flags look at the man page for chattr on the target system. This string should contain the attributes in the same order as the one displayed by lsattr. The `=` operator is assumed as default, otherwise `+` or `-` operators need to be included in the string.
backup boolean	Create a backup file including a timestamp so you can get the original CRL back if you overwrote it with a new one by accident. Choices: `false` ← (default) `true`
crl_mode string added in community.crypto 2.13.0	Defines how to process entries of existing CRLs. If set to `generate`, makes sure that the CRL has the exact set of revoked certificates as specified in `revoked_certificates`. If set to `update`, makes sure that the CRL contains the revoked certificates from `revoked_certificates`, but can also contain other revoked certificates. If the CRL file already exists, all entries from the existing CRL will also be included in the new CRL. When using `update`, you might be interested in setting `ignore_timestamps` to `true`. The default value is `generate`. This parameter was called `mode` before community.crypto 2.13.0. It has been renamed to avoid a collision with the common `mode` parameter for setting the CRL file’s access mode. Choices: `"generate"` `"update"`
digest string	Digest algorithm to be used when signing the CRL. Default: `"sha256"`
force boolean	Should the CRL be forced to be regenerated. Choices: `false` ← (default) `true`
format string	Whether the CRL file should be in PEM or DER format. If an existing CRL file does match everything but `format`, it will be converted to the correct format instead of regenerated. Choices: `"pem"` ← (default) `"der"`
group string	Name of the group that should own the filesystem object, as would be fed to chown. When left unspecified, it uses the current group of the current user unless you are root, in which case it can preserve the previous ownership.
ignore_timestamps boolean	Whether the timestamps `last_update`, `next_update` and `revoked_certificates[].revocation_date` should be ignored for idempotency checks. The timestamp `revoked_certificates[].invalidity_date` will never be ignored. Use this in combination with relative timestamps for these values to get idempotency. Choices: `false` ← (default) `true`
issuer dictionary	Key/value pairs that will be present in the issuer name field of the CRL. If you need to specify more than one value with the same key, use a list as value. If the order of the components is important, use `issuer_ordered`. One of `issuer` and `issuer_ordered` is required if `state` is `present`. Mutually exclusive with `issuer_ordered`.
issuer_ordered list / elements=dictionary added in community.crypto 2.0.0	A list of dictionaries, where every dictionary must contain one key/value pair. This key/value pair will be present in the issuer name field of the CRL. If you want to specify more than one value with the same key in a row, you can use a list as value. One of `issuer` and `issuer_ordered` is required if `state` is `present`. Mutually exclusive with `issuer`.
last_update string	The point in time from which this CRL can be trusted. Time can be specified either as relative time or as absolute timestamp. Time will always be interpreted as UTC. Valid format is `[+-]timespec \| ASN.1 TIME` where timespec can be an integer + `[w \| d \| h \| m \| s]` (for example `+32w1d2h`). Note that if using relative time this module is NOT idempotent, except when `ignore_timestamps` is set to `true`. Default: `"+0s"`
mode string	This parameter has been renamed to `crl_mode`. The old name `mode` is now deprecated and will be removed in community.crypto 3.0.0. Replace usage of this parameter with `crl_mode`. Note that from community.crypto 3.0.0 on, `mode` will be used for the CRL file’s mode. Choices: `"generate"` `"update"`
name_encoding string	How to encode names (DNS names, URIs, email addresses) in return values. `ignore` will use the encoding returned by the backend. `idna` will convert all labels of domain names to IDNA encoding. IDNA2008 will be preferred, and IDNA2003 will be used if IDNA2008 encoding fails. `unicode` will convert all labels of domain names to Unicode. IDNA2008 will be preferred, and IDNA2003 will be used if IDNA2008 decoding fails. Note that `idna` and `unicode` require the idna Python library to be installed. Choices: `"ignore"` ← (default) `"idna"` `"unicode"`
next_update string	The absolute latest point in time by which this `issuer` is expected to have issued another CRL. Many clients will treat a CRL as expired once `next_update` occurs. Time can be specified either as relative time or as absolute timestamp. Time will always be interpreted as UTC. Valid format is `[+-]timespec \| ASN.1 TIME` where timespec can be an integer + `[w \| d \| h \| m \| s]` (for example `+32w1d2h`). Note that if using relative time this module is NOT idempotent, except when `ignore_timestamps` is set to `true`. Required if `state` is `present`.
owner string	Name of the user that should own the filesystem object, as would be fed to chown. When left unspecified, it uses the current user unless you are root, in which case it can preserve the previous ownership. Specifying a numeric username will be assumed to be a user ID and not a username. Avoid numeric usernames to avoid this confusion.
path path / required	Remote absolute path where the generated CRL file should be created or is already located.
privatekey_content string	The content of the CA’s private key to use when signing the CRL. Either `privatekey_path` or `privatekey_content` must be specified if `state` is `present`, but not both.
privatekey_passphrase string	The passphrase for the `privatekey_path`. This is required if the private key is password protected.
privatekey_path path	Path to the CA’s private key to use when signing the CRL. Either `privatekey_path` or `privatekey_content` must be specified if `state` is `present`, but not both.
return_content boolean	If set to `true`, will return the (current or generated) CRL’s content as `crl`. Choices: `false` ← (default) `true`
revoked_certificates list / elements=dictionary	List of certificates to be revoked. Required if `state` is `present`.
content string	Content of a certificate in PEM format. The serial number and issuer will be extracted from the certificate. Mutually exclusive with `revoked_certificates[].path` and `revoked_certificates[].serial_number`. One of these three options must be specified.
invalidity_date string	The point in time it was known/suspected that the private key was compromised or that the certificate otherwise became invalid. Time can be specified either as relative time or as absolute timestamp. Time will always be interpreted as UTC. Valid format is `[+-]timespec \| ASN.1 TIME` where timespec can be an integer + `[w \| d \| h \| m \| s]` (for example `+32w1d2h`). Note that if using relative time this module is NOT idempotent. This will NOT change when `ignore_timestamps` is set to `true`.
invalidity_date_critical boolean	Whether the invalidity date extension should be critical. Choices: `false` ← (default) `true`
issuer list / elements=string	The certificate’s issuer. Example: `DNS:ca.example.org`
issuer_critical boolean	Whether the certificate issuer extension should be critical. Choices: `false` ← (default) `true`
path path	Path to a certificate in PEM format. The serial number and issuer will be extracted from the certificate. Mutually exclusive with `revoked_certificates[].content` and `revoked_certificates[].serial_number`. One of these three options must be specified.
reason string	The value for the revocation reason extension. Choices: `"unspecified"` `"key_compromise"` `"ca_compromise"` `"affiliation_changed"` `"superseded"` `"cessation_of_operation"` `"certificate_hold"` `"privilege_withdrawn"` `"aa_compromise"` `"remove_from_crl"`
reason_critical boolean	Whether the revocation reason extension should be critical. Choices: `false` ← (default) `true`
revocation_date string	The point in time the certificate was revoked. Time can be specified either as relative time or as absolute timestamp. Time will always be interpreted as UTC. Valid format is `[+-]timespec \| ASN.1 TIME` where timespec can be an integer + `[w \| d \| h \| m \| s]` (for example `+32w1d2h`). Note that if using relative time this module is NOT idempotent, except when `ignore_timestamps` is set to `true`. Default: `"+0s"`
serial_number any	Serial number of the certificate. Mutually exclusive with `revoked_certificates[].path` and `revoked_certificates[].content`. One of these three options must be specified. This option accepts integers or hex octet strings, depending on the value of `serial_numbers`. If `serial_numbers=integer`, integers such as `66223` must be provided. If `serial_numbers=hex-octets`, strings such as `01:02:AF` must be provided. You can use the filters community.crypto.parse_serial and community.crypto.to_serial to convert these two representations.
selevel string	The level part of the SELinux filesystem object context. This is the MLS/MCS attribute, sometimes known as the `range`. When set to `_default`, it will use the `level` portion of the policy if available.
serial_numbers string added in community.crypto 2.18.0	This option determines which values will be accepted for `revoked_certificates[].serial_number`. If set to `integer` (default), serial numbers are assumed to be integers, for example `66223`. (This example value is equivalent to the hex octet string `01:02:AF`.) If set to `hex-octets`, serial numbers are assumed to be colon-separated hex octet strings, for example `01:02:AF`. (This example value is equivalent to the integer `66223`.) Choices: `"integer"` ← (default) `"hex-octets"`
serole string	The role part of the SELinux filesystem object context. When set to `_default`, it will use the `role` portion of the policy if available.
setype string	The type part of the SELinux filesystem object context. When set to `_default`, it will use the `type` portion of the policy if available.
seuser string	The user part of the SELinux filesystem object context. By default it uses the `system` policy, where applicable. When set to `_default`, it will use the `user` portion of the policy if available.
state string	Whether the CRL file should exist or not, taking action if the state is different from what is stated. Choices: `"absent"` `"present"` ← (default)
unsafe_writes boolean	Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target filesystem object. By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target filesystem objects, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted filesystem objects, which cannot be updated atomically from inside the container and can only be written in an unsafe manner. This option allows Ansible to fall back to unsafe methods of updating filesystem objects when atomic operations fail (however, it doesn’t force Ansible to perform unsafe writes). IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption. Choices: `false` ← (default) `true`

Attributes 

Attribute	Support	Description
check_mode	Support: full	Can run in `check_mode` and return changed status prediction without modifying target.
diff_mode	Support: full	Will return details on what has changed (or possibly needs changing in `check_mode`), when in diff mode.
safe_file_operations	Support: full	Uses Ansible’s strict file operation functions to ensure proper permissions and avoid data corruption.

Notes 

Note

All ASN.1 TIME values should be specified following the YYYYMMDDHHMMSSZ pattern.
Date specified should be UTC. Minutes and seconds are mandatory.

Examples 

- name: Generate a CRL
  community.crypto.x509_crl:
    path: /etc/ssl/my-ca.crl
    privatekey_path: /etc/ssl/private/my-ca.pem
    issuer:
      CN: My CA
    last_update: "+0s"
    next_update: "+7d"
    revoked_certificates:
      - serial_number: 1234
        revocation_date: 20190331202428Z
        issuer:
          CN: My CA
      - serial_number: 2345
        revocation_date: 20191013152910Z
        reason: affiliation_changed
        invalidity_date: 20191001000000Z
      - path: /etc/ssl/crt/revoked-cert.pem
        revocation_date: 20191010010203Z

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
backup_file string	Name of backup file created. Returned: changed and if `backup` is `true` Sample: `"/path/to/my-ca.crl.2019-03-09@11:22~"`
crl string	The (current or generated) CRL’s content. Will be the CRL itself if `format` is `pem`, and Base64 of the CRL if `format` is `der`. Returned: if `state` is `present` and `return_content` is `true`
digest string	The signature algorithm used to sign the CRL. Returned: success Sample: `"sha256WithRSAEncryption"`
filename string	Path to the generated CRL. Returned: changed or success Sample: `"/path/to/my-ca.crl"`
format string	Whether the CRL is in PEM format (`pem`) or in DER format (`der`). Returned: success Can only return: `"pem"` `"der"` Sample: `"pem"`
issuer dictionary	The CRL’s issuer. Note that for repeated values, only the last one will be returned. See `name_encoding` for how IDNs are handled. Returned: success Sample: `{"commonName": "ca.example.com", "organizationName": "Ansible"}`
issuer_ordered list / elements=list	The CRL’s issuer as an ordered list of tuples. Returned: success Sample: `[["organizationName", "Ansible"], [{"commonName": "ca.example.com"}]]`
last_update string	The point in time from which this CRL can be trusted as ASN.1 TIME. Returned: success Sample: `"20190413202428Z"`
next_update string	The point in time from which a new CRL will be issued and the client has to check for it as ASN.1 TIME. Returned: success Sample: `"20190413202428Z"`
privatekey string	Path to the private CA key. Returned: changed or success Sample: `"/path/to/my-ca.pem"`
revoked_certificates list / elements=dictionary	List of certificates to be revoked. Returned: success
invalidity_date string	The point in time it was known/suspected that the private key was compromised or that the certificate otherwise became invalid as ASN.1 TIME. Returned: success Sample: `"20190413202428Z"`
invalidity_date_critical boolean	Whether the invalidity date extension is critical. Returned: success Sample: `false`
issuer list / elements=string	The certificate’s issuer. See `name_encoding` for how IDNs are handled. Returned: success Sample: `["DNS:ca.example.org"]`
issuer_critical boolean	Whether the certificate issuer extension is critical. Returned: success Sample: `false`
reason string	The value for the revocation reason extension. Returned: success Can only return: `"unspecified"` `"key_compromise"` `"ca_compromise"` `"affiliation_changed"` `"superseded"` `"cessation_of_operation"` `"certificate_hold"` `"privilege_withdrawn"` `"aa_compromise"` `"remove_from_crl"` Sample: `"key_compromise"`
reason_critical boolean	Whether the revocation reason extension is critical. Returned: success Sample: `false`
revocation_date string	The point in time the certificate was revoked as ASN.1 TIME. Returned: success Sample: `"20190413202428Z"`
serial_number integer	Serial number of the certificate. This return value is an integer. If you need the serial numbers as a colon-separated hex string, such as `11:22:33`, you need to convert it to that form with community.crypto.to_serial. Returned: success Sample: `1234`

Authors

Felix Fontein (@felixfontein)

community.crypto.x509_crl module – Generate Certificate Revocation Lists (CRLs)

Synopsis 

Requirements 

Parameters 

Attributes 

Notes 

See Also 

Examples 

Return Values 

Authors

Collection links