dellemc.openmanage.idrac_bios module – Modify and clear BIOS attributes, reset BIOS settings and configure boot sources

Note

This module is part of the dellemc.openmanage collection (version 8.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.openmanage. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: dellemc.openmanage.idrac_bios.

New in dellemc.openmanage 2.1.0

Synopsis 

This module allows to modify the BIOS attributes. Also clears pending BIOS attributes and resets BIOS to default settings.
Boot sources can be enabled or disabled. Boot sequence can be configured.

Requirements 

The below requirements are needed on the host that executes this module.

omsdk >= 1.2.490
python >= 3.9.6

Parameters 

Parameter	Comments
apply_time string	Apply time of the attributes. This is applicable only to attributes. `Immediate` Allows the user to immediately reboot the host and apply the changes. job_wait is applicable. `OnReset` Allows the user to apply the changes on the next reboot of the host server. `AtMaintenanceWindowStart` Allows the user to apply at the start of a maintenance window as specified in maintenance_window. A reboot job will be scheduled. `InMaintenanceWindowOnReset` Allows to apply after a manual reset but within the maintenance window as specified in maintenance_window. Choices: `"Immediate"` ← (default) `"OnReset"` `"AtMaintenanceWindowStart"` `"InMaintenanceWindowOnReset"`
attributes dictionary	Dictionary of BIOS attributes and value pair. Attributes should be part of the Redfish Dell BIOS Attribute Registry. Use https://I(idrac_ip/redfish/v1/Systems/System.Embedded.1/Bios) to view the Redfish URI. This is mutually exclusive with boot_sources, clear_pending, and reset_bios.
boot_sources list / elements=any	(deprecated)List of boot devices to set the boot sources settings. boot_sources is mutually exclusive with attributes, clear_pending, and reset_bios. job_wait is not applicable. The module waits till the completion of this task. This feature is deprecated, please use dellemc.openmanage.idrac_boot for configuring boot sources.
ca_path path added in dellemc.openmanage 5.0.0	The Privacy Enhanced Mail (PEM) file that contains a CA certificate to be used for the validation.
clear_pending boolean	Allows the user to clear all pending BIOS attributes changes. `true` will discard any pending changes to bios attributes or remove job if in scheduled state. This operation will not create any job. `false` will not perform any operation. This is mutually exclusive with boot_sources, attributes, and reset_bios. `Note` Any BIOS job scheduled due to boot sources configuration will not be cleared. Choices: `false` `true`
idrac_ip string / required	iDRAC IP Address.
idrac_password aliases: idrac_pwd string / required	iDRAC user password. If the password is not provided, then the environment variable `IDRAC_PASSWORD` is used. Example: export IDRAC_PASSWORD=password
idrac_port integer	iDRAC port. Default: `443`
idrac_user string / required	iDRAC username. If the username is not provided, then the environment variable `IDRAC_USERNAME` is used. Example: export IDRAC_USERNAME=username
job_wait boolean	Provides the option to wait for job completion. This is applicable for attributes when apply_time is `Immediate`. Choices: `false` `true` ← (default)
job_wait_timeout integer	The maximum wait time of job_wait in seconds. The job is tracked only for this duration. This option is applicable when job_wait is `true`. Default: `1200`
maintenance_window dictionary	Option to schedule the maintenance window. This is required when apply_time is `AtMaintenanceWindowStart` or `InMaintenanceWindowOnReset`.
duration integer / required	The duration in seconds for the maintenance window.
start_time string / required	The start time for the maintenance window to be scheduled. The format is YYYY-MM-DDThh:mm:ss<offset> <offset> is the time offset from UTC that the current timezone set in iDRAC in the format: +05:30 for IST.
reset_bios boolean	Resets the BIOS to default settings and triggers a reboot of host system. This is applied to the host after the restart. This operation will not create any job. `false` will not perform any operation. This is mutually exclusive with boot_sources, attributes, and clear_pending. When `true`, this action will always report as changes found to be applicable. Choices: `false` `true`
reset_type string	`force_restart` Forcefully reboot the host system. `graceful_restart` Gracefully reboot the host system. This is applicable for reset_bios, and attributes when apply_time is `Immediate`. Choices: `"graceful_restart"` ← (default) `"force_restart"`
share_mnt string	(deprecated)Local mount path of the network share with read-write permission for ansible user. This option is mandatory for network shares.
share_name string	(deprecated)Network share or a local path.
share_password aliases: share_pwd string	(deprecated)Network share user password. This option is mandatory for CIFS share.
share_user string	(deprecated)Network share user name. Use the format ‘user@domain’ or domain//user if user is part of a domain. This option is mandatory for CIFS share.
timeout integer added in dellemc.openmanage 5.0.0	The socket level timeout in seconds. Default: `30`
validate_certs boolean added in dellemc.openmanage 5.0.0	If `false`, the SSL certificates will not be validated. Configure `false` only on personally controlled sites where self-signed certificates are used. Prior to collection version `5.0.0`, the validate_certs is `false` by default. Choices: `false` `true` ← (default)

Notes 

Note

omsdk is required to be installed only for boot_sources operation.
This module requires ‘Administrator’ privilege for idrac_user.
Run this module from a system that has direct access to Dell iDRAC.
This module supports both IPv4 and IPv6 address for idrac_ip.
This module supports check_mode.

Examples 

---
- name: Configure generic attributes of the BIOS
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    attributes:
      BootMode: "Bios"
      OneTimeBootMode: "Enabled"
      BootSeqRetry: "Enabled"

- name: Configure PXE generic attributes
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    attributes:
      PxeDev1EnDis: "Enabled"
      PxeDev1Protocol: "IPV4"
      PxeDev1VlanEnDis: "Enabled"
      PxeDev1VlanId: 1
      PxeDev1Interface: "NIC.Embedded.1-1-1"
      PxeDev1VlanPriority: 2

- name: Configure BIOS attributes at Maintenance window
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    apply_time: AtMaintenanceWindowStart
    maintenance_window:
      start_time: "2022-09-30T05:15:40-05:00"
      duration: 600
    attributes:
      BootMode: "Bios"
      OneTimeBootMode: "Enabled"
      BootSeqRetry: "Enabled"

- name: Clear pending BIOS attributes
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    clear_pending: true

- name: Reset BIOS attributes to default settings.
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    validate_certs: false
    reset_bios: true

- name: Configure boot sources
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    boot_sources:
      - Name: "NIC.Integrated.1-2-3"
        Enabled: true
        Index: 0

- name: Configure multiple boot sources
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    boot_sources:
      - Name: "NIC.Integrated.1-1-1"
        Enabled: true
        Index: 0
      - Name: "NIC.Integrated.2-2-2"
        Enabled: true
        Index: 1
      - Name: "NIC.Integrated.3-3-3"
        Enabled: true
        Index: 2

- name: Configure boot sources - Enabling
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    boot_sources:
      - Name: "NIC.Integrated.1-1-1"
        Enabled: true

- name: Configure boot sources - Index
  dellemc.openmanage.idrac_bios:
    idrac_ip: "192.168.0.1"
    idrac_user: "user_name"
    idrac_password: "user_password"
    ca_path: "/path/to/ca_cert.pem"
    boot_sources:
      - Name: "NIC.Integrated.1-1-1"
        Index: 0

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
error_info dictionary	Details of the HTTP Error. Returned: on HTTP error Sample: `{"error": {"@Message.ExtendedInfo": [{"Message": "Unable to process the request because an error occurred.", "MessageArgs": [], "MessageId": "GEN1234", "RelatedProperties": [], "Resolution": "Retry the operation. If the issue persists, contact your system administrator.", "Severity": "Critical"}], "code": "Base.1.0.GeneralError", "message": "A general error has occurred. See ExtendedInfo for more information."}}`
invalid_attributes dictionary	Dict of invalid attributes provided. Returned: on invalid attributes or values. Sample: `{"AcPwrRcvryUserDelay": "Integer out of valid range.", "AssetTag": "Attribute does not exist.", "BootSeqRetry": "Invalid value for Enumeration.", "Proc1Brand": "Read only Attribute cannot be modified.", "PxeDev1VlanId": "Not a valid integer."}`
msg dictionary	Status of the job for boot_sources or status of the action performed on bios. Returned: success Sample: `{"CompletionTime": "2020-04-20T18:50:20", "Description": "Job Instance", "EndTime": null, "Id": "JID_873888162305", "JobState": "Completed", "JobType": "ImportConfiguration", "Message": "Successfully imported and applied Server Configuration Profile.", "MessageArgs": [], "MessageId": "SYS053", "Name": "Import Configuration", "PercentComplete": 100, "StartTime": "TIME_NOW", "Status": "Success", "TargetSettingsURI": null, "retval": true}`
status_msg string	Overall status of the bios operation. Returned: success Sample: `"Successfully cleared pending BIOS attributes."`

Authors

Felix Stephen (@felixs88)
Anooja Vardhineni (@anooja-vardhineni)
Jagadeesh N V (@jagadeeshnv)
Shivam Sharma (@shivam-sharma)

dellemc.openmanage.idrac_bios module – Modify and clear BIOS attributes, reset BIOS settings and configure boot sources

Synopsis

Requirements

Parameters

Notes

Examples

Return Values