dellemc.openmanage.ome_application_security_settings module – Configure the login security properties

Note

This module is part of the dellemc.openmanage collection (version 8.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.openmanage. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: dellemc.openmanage.ome_application_security_settings.

New in dellemc.openmanage 4.4.0

Synopsis

• This module allows you to configure the login security properties on OpenManage Enterprise or OpenManage Enterprise Modular

Requirements

The below requirements are needed on the host that executes this module.

• python >= 3.8.6

Parameters

Parameter	Comments
ca_path path added in dellemc.openmanage 5.0.0	The Privacy Enhanced Mail (PEM) file that contains a CA certificate to be used for the validation.
fips_mode_enable boolean	The FIPS mode is intended to meet the requirements of FIPS 140-2 level 1. For more information refer to the FIPS user guide This is applicable only for OpenManage Enterprise Modular only This is mutually exclusive with restrict_allowed_ip_range and login_lockout_policy. WARNING Enabling or Disabling this option resets your chassis to default settings. This may cause change in IP settings and loss of network connectivity. WARNING The FIPS mode cannot be enabled on a lead chassis in a multi-chassis management configuration. To toggle enable FIPS on a lead chassis, delete the chassis group, enable FIPS and recreate the group. WARNING For a Standalone or member chassis, enabling the FIPS mode deletes any fabrics created. This may cause loss of network connectivity and data paths to the compute sleds. Choices: false true
hostname string / required	OpenManage Enterprise or OpenManage Enterprise Modular IP address or hostname.
job_wait boolean	Provides an option to wait for job completion. Choices: false true ← (default)
job_wait_timeout integer	The maximum wait time of job_wait in seconds. The job is tracked only for this duration. This option is applicable when job_wait is true. Default: 120
login_lockout_policy dictionary	Locks the application after multiple unsuccessful login attempts. This is mutually exclusive with fips_mode_enable.
by_ip_address boolean	Enable or disable lockout policy settings based on the IP address. This restricts the number of unsuccessful login attempts from a specific IP address for a specific time interval. Choices: false true
by_user_name boolean	Enable or disable lockout policy settings based on the user name. This restricts the number of unsuccessful login attempts from a specific user for a specific time interval. Choices: false true
lockout_fail_count integer	The number of unsuccessful login attempts that are allowed after which the appliance prevents log in from the specific username or IP Address.
lockout_fail_window integer	Lockout fail window is the time in seconds within which the lockout fail count event must occur to trigger the lockout penalty time. Enter the duration for which OpenManage Enterprise must display information about a failed attempt.
lockout_penalty_time integer	The duration of time, in seconds, that login attempts from the specific user or IP address must not be allowed.
password string / required	OpenManage Enterprise or OpenManage Enterprise Modular password. If the password is not provided, then the environment variable OME_PASSWORD is used. Example: export OME_PASSWORD=password
port integer	OpenManage Enterprise or OpenManage Enterprise Modular HTTPS port. Default: 443
restrict_allowed_ip_range dictionary	Restrict to allow inbound connections only from the specified IP address range. This is mutually exclusive with fips_mode_enable. NOTE When restrict_allowed_ip_range is configured on the appliance, any inbound connection to the appliance, such as alert reception, firmware update, and network identities are blocked from the devices that are outside the specified IP address range. However, any outbound connection from the appliance will work on all devices.
enable_ip_range boolean / required	Allow connections based on the IP address range. Choices: false true
ip_range string	The IP address range in Classless Inter-Domain Routing (CIDR) format. For example: 192.168.100.14/24 or 2001:db8::/24
timeout integer added in dellemc.openmanage 5.0.0	The socket level timeout in seconds. Default: 30
username string / required	OpenManage Enterprise or OpenManage Enterprise Modular username. If the username is not provided, then the environment variable OME_USERNAME is used. Example: export OME_USERNAME=username
validate_certs boolean added in dellemc.openmanage 5.0.0	If false, the SSL certificates will not be validated. Configure false only on personally controlled sites where self-signed certificates are used. Prior to collection version 5.0.0, the validate_certs is false by default. Choices: false true ← (default)

Notes

Note

• Run this module from a system that has direct access to Dell OpenManage Enterprise or OpenManage Enterprise Modular.

• This module supports check_mode.

Examples

---
- name: Configure restricted allowed IP range
  dellemc.openmanage.ome_application_security_settings:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    restrict_allowed_ip_range:
      enable_ip_range: true
      ip_range: 192.1.2.3/24

- name: Configure login lockout policy
  dellemc.openmanage.ome_application_security_settings:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    login_lockout_policy:
      by_user_name: true
      by_ip_address: true
      lockout_fail_count: 3
      lockout_fail_window: 30
      lockout_penalty_time: 900

- name: Configure restricted allowed IP range and login lockout policy with job wait time out of 60 seconds
  dellemc.openmanage.ome_application_security_settings:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    restrict_allowed_ip_range:
      enable_ip_range: true
      ip_range: 192.1.2.3/24
    login_lockout_policy:
      by_user_name: true
      by_ip_address: true
      lockout_fail_count: 3
      lockout_fail_window: 30
      lockout_penalty_time: 900
    job_wait_timeout: 60

- name: Enable FIPS mode
  dellemc.openmanage.ome_application_security_settings:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    ca_path: "/path/to/ca_cert.pem"
    fips_mode_enable: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
error_info dictionary	Details of http error. Returned: on http error Sample: {"error": {"@Message.ExtendedInfo": [{"Message": "Unable to process the request because the domain information cannot be retrieved.", "MessageArgs": [], "MessageId": "CGEN8007", "RelatedProperties": [], "Resolution": "Verify the status of the database and domain configuration, and then retry the operation.", "Severity": "Critical"}], "code": "Base.1.0.GeneralError", "message": "A general error has occurred. See ExtendedInfo for more information."}}
job_id integer	Job ID of the security configuration task. Returned: When security configuration properties are provided Sample: 10123
msg string	Overall status of the login security configuration. Returned: always Sample: "Successfully applied the security settings."

Authors

• Jagadeesh N V(@jagadeeshnv)

Collection links

• Issue Tracker
• Homepage
• Repository (Sources)