ibm.spectrum_virtualize.ibm_svc_info module – This module gathers various information from the IBM Spectrum Virtualize family storage systems
Note
This module is part of the ibm.spectrum_virtualize collection (version 2.0.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install ibm.spectrum_virtualize
.
To use it in a playbook, specify: ibm.spectrum_virtualize.ibm_svc_info
.
Note
The ibm.spectrum_virtualize collection has been renamed to ibm.storage_virtualize and will be removed from Ansible 12. The content of ibm.spectrum_virtualize will be replaced by redirects to ibm.storage_virtualize in Ansible 10. If you use content from ibm.spectrum_virtualize, please update FQCNs in your playbooks and roles! When creating new playbooks or roles, directly use content from ibm.storage_virtualize instead.
New in ibm.spectrum_virtualize 1.0.0
Synopsis
Gathers the list of specified IBM Spectrum Virtualize family storage system entities. These include the list of nodes, pools, volumes, hosts, host clusters, FC ports, iSCSI ports, target port FC, FC consistgrp, vdiskcopy, I/O groups, FC map, FC connectivity, NVMe fabric, array, and system.
Parameters
Parameter |
Comments |
---|---|
The hostname or management IP of the Spectrum Virtualize storage system. |
|
Domain for the Spectrum Virtualize storage system. Valid when hostname is used for the parameter clustername. |
|
List of string variables to specify the Spectrum Virtualize entities for which information is required. all - list of all Spectrum Virtualize entities supported by the module. vol - lists information for VDisks. pool - lists information for mdiskgrps. node - lists information for nodes. iog - lists information for I/O groups. host - lists information for hosts. hostvdiskmap - lists all VDisks mapped to host ‘objectname’ vdiskhostmap - lists all hosts VDisk ‘objectname’ is mapped to hc - lists information for host clusters. fc - lists information for FC connectivity. fcport - lists information for FC ports. targetportfc - lists information for WWPN which is required to set up FC zoning and to display the current failover status of host I/O ports. fcmap - lists information for FC maps. rcrelationship - lists information for remote copy relationships. fcconsistgrp - displays a concise list or a detailed view of flash copy consistency groups. rcconsistgrp - displays a concise list or a detailed view of remote copy consistency groups. iscsiport - lists information for iSCSI ports. vdiskcopy - lists information for volume copy. array - lists information for array MDisks. system - displays the storage system information. cloudaccount - lists all the configured cloud accounts. cloudaccountusage - lists the usage information about the configured cloud storage accounts. cloudimportcandidate - lists information about systems that have data that is stored in the cloud accounts. ldapserver - lists the most recent details for all configured Lightweight Directory Access Protocol (LDAP) servers. drive - lists the configuration information and drive vital product data (VPD). user - lists all the users that are created on the system. usergroup - lists the user groups that is created on the system. ownershipgroup - displays the ownership groups that are available in the system. partnership - lists all the clustered systems (systems) that are associated with the local system. replicationpolicy - lists all the replication policies on the system. cloudbackup - lists the volumes that have cloud snapshot enabled and volumes that have cloud snapshots in the cloud account. cloudbackupgeneration - lists any volume snapshots available on the specified volume. objectname is a mandatory parameter. snapshotpolicy - lists all the snapshot policies on the system. snapshotpolicyschedule - lists all snapshot schedules on the system. volumegroup - lists all volume groups on the system. volumegroupsnapshotpolicy - lists the snapshot policy attributes associated with a volume group on the system. volumesnapshot - lists all volume snapshots. dnsserver - lists the information for any Domain Name System (DNS) servers in the system. systemcertificate - lists the information about the current system Secure Sockets Layer (SSL) certificate. truststore - lists the current certificate stores. sra - command to check both secure remote assistance status and the time of the last login. syslogserver - lists the syslog servers that are configured on the clustered system. emailserver - lists the email servers that are configured on the system. emailuser - lists the Email event notification settings for all Email recipients, an individual Email recipient, or a specified type (local or support) of an Email recipient. provisioningpolicy - lists the provisioning policies available on the system. volumegroupsnapshot - lists the snapshot objects available on the system. callhome - displays the status of the Call Home information that is sent to a server in the Cloud. ip - lists the currently configured IP addresses. portset - lists the currently configured portset on the system. safeguardedpolicy - lists the Safeguarded policies available on the system. mdisk - displays a concise list or a detailed view of managed disks (MDisks) visible to the system. safeguardedpolicyschedule - displays the Safeguarded backup schedule that is associated with Safeguarded policies. eventlog - displays the concise view of system event log enclosurestats - lists the most recent values (averaged) of all enclosure statistics. enclosurestatshistory - lists the history values of all enclosure statistics including power consumed, temperature in fahrenheit and temperature in celsius. Choices:
Default: |
|
Path of debug log file. |
|
If specified, only the instance with the objectname is returned. If not specified, all the instances are returned. |
|
REST API password for the Spectrum Virtualize storage system. The parameters username and password are required if not using token to authenticate a user. |
|
The authentication token to verify a user on the Spectrum Virtualize storage system. To generate a token, use the ibm_svc_auth module. |
|
REST API username for the Spectrum Virtualize storage system. The parameters username and password are required if not using token to authenticate a user. |
|
Validates certification. Choices:
|
Notes
Note
This module supports
check_mode
.
Examples
- name: Get volume info
ibm.spectrum_virtualize.ibm_svc_info:
clustername: "{{clustername}}"
domain: "{{domain}}"
username: "{{username}}"
password: "{{password}}"
log_path: /tmp/ansible.log
gather_subset: vol
- name: Get volume info
ibm.spectrum_virtualize.ibm_svc_info:
clustername: "{{clustername}}"
domain: "{{domain}}"
username: "{{username}}"
password: "{{password}}"
log_path: /tmp/ansible.log
objectname: volumename
gather_subset: vol
- name: Get pool info
ibm.spectrum_virtualize.ibm_svc_info:
clustername: "{{clustername}}"
domain: "{{domain}}"
username: "{{username}}"
password: "{{password}}"
log_path: /tmp/ansible.log
gather_subset: pool
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Data will be populated when gather_subset=array or gather_subset=all Lists information for array MDisks Returned: success Sample: |
|
Data will be populated when gather_subset=callhome or gather_subset=all Displays the status of the Call Home information that is sent to a server in the Cloud Returned: success Sample: |
|
Data will be populated when gather_subset=cloudaccount or gather_subset=all Lists all the configured cloud accounts Returned: success Sample: |
|
Data will be populated when gather_subset=cloudaccountusage or gather_subset=all Lists the usage information about the configured cloud storage accounts Returned: success Sample: |
|
Data will be populated when gather_subset=cloudbackup or gather_subset=all Lists the volumes that have cloud snapshot that enabled and volumes that have cloud snapshots in the cloud account Returned: success Sample: |
|
Data will be populated when gather_subset=cloudbackupgeneration List any volume snapshots available on the specified volume Returned: success Sample: |
|
Data will be populated when gather_subset=cloudimportcandidate or gather_subset=all Lists information about systems that have data that is stored in the cloud accounts Returned: success Sample: |
|
Data will be populated when gather_subset=dnsserver or gather_subset=all Lists the information for any Domain Name System (DNS) servers in the system Returned: success Sample: |
|
Data will be populated when gather_subset=drive or gather_subset=all Lists the configuration information and drive vital product data (VPD) Returned: success Sample: |
|
Data will be populated when gather_subset=emailserver or gather_subset=all Lists the Email servers that are configured on the system Returned: success Sample: |
|
Data will be populated when gather_subset=emailuser or gather_subset=all Lists the Email event notification settings for all Email recipients, an individual Email recipient, or a specified type (local or support) of Email recipient Returned: success Sample: |
|
Data will be populated when gather_subset=enclosurestats or gather_subset=all Lists the most recent values (averaged) of all enclosure statistics. Returned: success Sample: |
|
Data will be populated when gather_subset=enclosurestatshistory or gather_subset=all Lists the history values of all enclosure statistics including power consumed, temperature in fahrenheit and temperature in celsius. Returned: success Sample: |
|
Data will be populated when gather_subset=eventlog or gather_subset=all Lists information about the system event log Returned: success Sample: |
|
Data will be populated when gather_subset=fc or gather_subset=all Lists information for FC connectivity Returned: success Sample: |
|
Data will be populated when gather_subset=fcconsistgrp or gather_subset=all Displays a concise list or a detailed view of flash copy consistency groups Returned: success Sample: |
|
Data will be populated when gather_subset=fcmap or gather_subset=all Lists information for FC maps Returned: success Sample: |
|
Data will be populated when gather_subset=fcport or gather_subset=all Lists information for FC ports Returned: success Sample: |
|
Data will be populated when gather_subset=host or gather_subset=all Lists information for hosts Returned: success Sample: |
|
Data will be populated when gather_subset=hc or gather_subset=all Lists information for host clusters Returned: success Sample: |
|
Data will be populated when gather_subset=hostvdiskmap or gather_subset=all Lists all VDisks mapped to host ‘objectname’ Returned: success Sample: |
|
Data will be populated when gather_subset=iog or gather_subset=all Lists information for I/O groups Returned: success Sample: |
|
Data will be populated when gather_subset=ip or gather_subset=all Lists the currently configured IP addresses Returned: success Sample: |
|
Data will be populated when gather_subset=iscsiport or gather_subset=all Lists information for iSCSI ports Returned: success Sample: |
|
Data will be populated when gather_subset=ldapserver or gather_subset=all Lists the most recent details for all configured Lightweight Directory Access Protocol (LDAP) servers Returned: success Sample: |
|
Data will be populated when gather_subset=mdisk or gather_subset=all Displays a concise list or a detailed view of managed disks (MDisks) visible to the system Returned: success Sample: |
|
Data will be populated when gather_subset=node or gather_subset=all Lists information for nodes Returned: success Sample: |
|
Data will be populated when gather_subset=ownershipgroup or gather_subset=all Displays the ownership groups that are available in the system Returned: success Sample: |
|
Data will be populated when gather_subset=partnership or gather_subset=all Lists all the clustered systems (systems) that are associated with the local system Returned: success Sample: |
|
Data will be populated when gather_subset=pool or gather_subset=all Lists information for mdiskgrps Returned: success Sample: |
|
Data will be populated when gather_subset=portset or gather_subset=all Lists the currently configured portset on the system Returned: success Sample: |
|
Data will be populated when gather_subset=provisioningpolicy or gather_subset=all Lists the provisioning policies available on the system Returned: success Sample: |
|
Data will be populated when gather_subset=rcconsistgrp or gather_subset=all Displays a concise list or a detailed view of remote copy consistency groups Returned: success Sample: |
|
Data will be populated when gather_subset=rcrelationship or gather_subset=all Lists information for remote copy relationships Returned: success Sample: |
|
Data will be populated when gather_subset=replicationpolicy or gather_subset=all Lists all the replication policies on the system Returned: success Sample: |
|
Data will be populated when gather_subset=safeguardedpolicy or gather_subset=all Lists the Safeguarded policies available on the system Returned: success Sample: |
|
Data will be populated when gather_subset=safeguardedpolicyschedule or gather_subset=all Displays the Safeguarded backup schedule that is associated with Safeguarded policies Returned: success Sample: |
|
Data will be populated when gather_subset=snapshotpolicy or gather_subset=all Lists all the snapshot policies on the system Returned: success Sample: |
|
Data will be populated when gather_subset=snapshotpolicyschedule or gather_subset=all Lists all snapshot schedules on the system Returned: success Sample: |
|
Data will be populated when gather_subset=sra or gather_subset=all Command to check both secure remote assistance status and the time of the last login Returned: success Sample: |
|
Data will be populated when gather_subset=syslogserver or gather_subset=all Lists the syslog servers that are configured on the clustered system Returned: success Sample: |
|
Data will be populated when gather_subset=system or gather_subset=all Displays the storage system information Returned: success Sample: |
|
Data will be populated when gather_subset=systemcertificate or gather_subset=all Lists the information about the current system Secure Sockets Layer (SSL) certificate Returned: success Sample: |
|
Data will be populated when gather_subset=targetportfc or gather_subset=all Lists information for WWPN which is required to set up FC zoning and to display the current failover status of host I/O ports Returned: success Sample: |
|
Data will be populated when gather_subset=truststore or gather_subset=all Lists the current certificate stores Returned: success Sample: |
|
Data will be populated when gather_subset=user or gather_subset=all Lists all the users that are created on the system Returned: success Sample: |
|
Data will be populated when gather_subset=usergroup or gather_subset=all Lists the user groups that is created on the system Returned: success Sample: |
|
Data will be populated when gather_subset=vdiskcopy or gather_subset=all Lists information for volume copy Returned: success Sample: |
|
Data will be populated when gather_subset=vdiskhostmap or gather_subset=all Lists all hosts the VDisk ‘objectname’ is mapped to Returned: success Sample: |
|
Data will be populated when gather_subset=vol or gather_subset=all Lists information for VDisks Returned: success Sample: |
|
Data will be populated when gather_subset=volumegroup or gather_subset=all Lists all volume groups on the system Returned: success Sample: |
|
Data will be populated when gather_subset=volumegroupsnapshot or gather_subset=all Lists the snapshot objects available on the system based on volume group Returned: success Sample: |
|
Data will be populated when gather_subset=volumegroupsnapshotpolicy or gather_subset=all Lists view snapshot objects on the system Returned: success Sample: |
|
Data will be populated when gather_subset=volumesnapshot or gather_subset=all Lists all volume snapshots Returned: success Sample: |