junipernetworks.junos.junos_package module – Installs packages on remote devices running Junos
Note
This module is part of the junipernetworks.junos collection (version 5.3.1).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install junipernetworks.junos
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: junipernetworks.junos.junos_package
.
New in junipernetworks.junos 1.0.0
Synopsis
This module can install new and updated packages on remote devices running Junos. The module will compare the specified package with the one running on the remote device and install the specified version if there is a mismatch
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
junos-eznc
ncclient (>=v0.5.2)
Parameters
Parameter |
Comments |
---|---|
The force argument instructs the module to bypass the package version check and install the packaged identified in src on the remote device. Choices:
|
|
The force_host argument controls the way software package or bundle is added on remote JUNOS host and is applicable for JUNOS QFX5100 device. If the value is set to Choices:
|
|
The issu argument is a boolean flag when set to Choices:
|
|
The no_copy argument is responsible for instructing the remote device on where to install the package from. When enabled, the package is transferred to the remote device prior to installing. Choices:
|
|
Deprecated Starting with Ansible 2.5 we recommend using For more information please see the Junos OS Platform Options guide. <hr> A dict object containing connection details. |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable |
|
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for |
|
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable |
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. |
|
Configures the transport connection to use when connecting to the remote device. Choices:
|
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable |
|
In order for a package to take effect, the remote device must be restarted. When enabled, this argument will instruct the module to reboot the device once the updated package has been installed. If disabled or the remote package does not need to be changed, the device will not be started. Choices:
|
|
The src argument specifies the path to the source package to be installed on the remote device in the advent of a version mismatch. The src argument can be either a localized path or a full path to the package file to install. |
|
The |
|
The |
|
The unlink argument is responsible for instructing the remote device to remove the installation packages after installation. Choices:
|
|
The validate argument is responsible for instructing the remote device to skip checking the current device configuration compatibility with the package being installed. When set to false validation is not performed. Choices:
|
|
The version argument can be used to explicitly specify the version of the package that should be installed on the remote device. If the version argument is not specified, then the version is extracts from the src filename. |
Notes
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
Works with
local
connections only.Since this module uses junos-eznc to establish connection with junos device the netconf configuration parameters needs to be passed using module options for example
ssh_config
unlike other junos modules that usesnetconf
connection type.For information on using CLI and netconf see the :ref:`Junos OS Platform Options guide <junos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.
Examples
# the required set of connection arguments have been purposely left off
# the examples for brevity
- name: install local package on remote device
junipernetworks.junos.junos_package:
src: junos-vsrx-12.1X46-D10.2-domestic.tgz
- name: install local package on remote device without rebooting
junipernetworks.junos.junos_package:
src: junos-vsrx-12.1X46-D10.2-domestic.tgz
reboot: false
- name: install local package on remote device with jumpost
junipernetworks.junos.junos_package:
src: junos-vsrx-12.1X46-D10.2-domestic.tgz
ssh_config: /home/user/customsshconfig