junipernetworks.junos.junos_routing_options module – Manage routing-options configuration on Junos devices.

Note

This module is part of the junipernetworks.junos collection (version 5.3.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_routing_options.

New in junipernetworks.junos 2.8.0

Synopsis 

This module manages routing-options configuration on devices running Junos.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)
xmltodict (>=0.12.0)

Parameters 

Parameter	Comments
config dictionary	A dictionary of routing-options configuration.
autonomous_system dictionary	Specify Autonomous system number.
as_number string / required	Specify Autonomous system number.
asdot_notation boolean	Enable AS-Dot notation to display true 4 byte AS numbers. Choices: `false` `true`
loops integer	Specify maximum number of times this AS can be in an AS path.
router_id string	Specify Router identifier.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show system routing-options. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Refer to examples for more details. Choices: `"merged"` ← (default) `"replaced"` `"deleted"` `"overridden"` `"parsed"` `"gathered"` `"rendered"`

Notes 

Note

This module requires the netconf system service be enabled on the device being managed.
This module works with connection netconf.
See the Junos OS Platform Options.
Tested against JunOS v18.4R1

Examples 

# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show system routing-options
#
- name: Merge provided NTP configuration into running configuration.
  junipernetworks.junos.junos_routing_options:
    config:
      autonomous_system:
        as_number: 2
        asdot_notation: true
    state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         }
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#           "<nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#           "<nc:autonomous-system>2<nc:asdot-notation/></nc:autonomous-system></nc:routing-options>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show routing-options
# autonomous-system 2 asdot-notation;
#
#
# Using Replaced
# Before state
# ------------
#
# vagrant@vsrx# show routing-options
# autonomous-system 2 asdot-notation;

- name: Replaced running routing-options configuration with provided configuration
  junipernetworks.junos.junos_routing_options:
    config:
      autonomous_system:
        as_number: 2
        asdot_notation: true
      router_id: "1.1.1.1"
    state: replaced
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         },
#         "router_id": "1.1.1.1"
#     },
#     "before": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         }
#     },
#     "changed": true,
#     "commands": [
#             "<nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#             "<nc:autonomous-system delete="delete"/><nc:autonomous-system>2<nc:asdot-notation/>"
#             "</nc:autonomous-system><nc:router-id>1.1.1.1</nc:router-id></nc:routing-options>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show routing-options
# router-id 1.1.1.1;
# autonomous-system 2 asdot-notation;


# Using overridden
#
# vagrant@vsrx# show routing-options
# autonomous-system 2 asdot-notation;

- name: Override running routing-options configuration with provided configuration
  junipernetworks.junos.junos_routing_options:
    config:
      autonomous_system:
        as_number: 2
        asdot_notation: true
      router_id: "1.1.1.1"
    state: overridden
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         },
#         "router_id": "1.1.1.1"
#     },
#     "before": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         }
#     },
#     "changed": true,
#     "commands": [
#             "<nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#             "<nc:autonomous-system delete="delete"/><nc:autonomous-system>2<nc:asdot-notation/>"
#             "</nc:autonomous-system><nc:router-id>1.1.1.1</nc:router-id></nc:routing-options>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show routing-options
# router-id 1.1.1.1;
# autonomous-system 2 asdot-notation;
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show routing-options
# router-id 1.1.1.1;
# autonomous-system 2 asdot-notation;
#
- name: Delete running routing-options configuration
  junipernetworks.junos.junos_routing_options:
    config:
    state: deleted
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": {},
#     "before": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         },
#         "router_id": "1.1.1.1"
#     },
#     "changed": true,
#     "commands": [
#               "<nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#               "<nc:autonomous-system delete="delete"/><nc:router-id delete="delete"/></nc:routing-options>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show routing-options
#
# [edit]
# Using gathered
#
# Before state
# ------------
#
# vagrant@vsrx# show routing-options
# router-id 1.1.1.1;
# autonomous-system 2 asdot-notation;

- name: Gather running routing-options configuration
  junipernetworks.junos.junos_routing_options:
    state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "gathered": {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true
#         },
#         "router_id": "1.1.1.1"
#     },
#     "changed": false,
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
  junipernetworks.junos.junos_routing_options:
    config:
      autonomous_system:
        as_number: 2
        asdot_notation: true
        loops: 4
      router_id: 12.12.12.12
    state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "rendered": [
#           "<nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#           "<nc:autonomous-system>2<nc:loops>4</nc:loops><nc:asdot-notation/></nc:autonomous-system>
#           "<nc:router-id>12.12.12.12</nc:router-id></nc:routing-options>"
#     ]
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <routing-options>
#             <router-id>12.12.12.12</router-id>
#             <autonomous-system>
#                 <as-number>2</as-number>
#                 <loops>4</loops>
#                 <asdot-notation/>
#             </autonomous-system>
#         </routing-options>
#     </configuration>
# </rpc-reply>
#
- name: Parse routing-options running config
  junipernetworks.junos.junos_routing_options:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  {
#         "autonomous_system": {
#             "as_number": "2",
#             "asdot_notation": true,
#             "loops": 4
#         },
#         "router_id": "12.12.12.12"
#     }
#

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration prior to the model invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["<nc:autonomous-system delete=\"delete\"/><nc:router-id delete=\"delete\"/></nc:routing-options>"]`

Authors

Rohit Thakur (@rohitthakur2590)

junipernetworks.junos.junos_routing_options module – Manage routing-options configuration on Junos devices.

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 