arista.eos.eos_bgp_global module – Manages BGP global resource module

Note

This module is part of the arista.eos collection (version 10.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_bgp_global.

New in arista.eos 1.4.0

Synopsis

• This module configures and manages the attributes of BGP global on Arista EOS platforms.

Parameters

Parameter	Comments
config dictionary	A list of configurations for BGP global.
access_group list / elements=dictionary	ip/ipv6 access list configuration.
acl_name string	access list name.
afi string	Specify ip/ipv6. Choices: "ipv4" "ipv6"
direction string	direction of packets.
aggregate_address list / elements=dictionary	Configure aggregate address.
address string	ipv4/ipv6 address prefix.
advertise_only boolean	Advertise without installing the generated blackhole route in FIB. Choices: false true
as_set boolean	Generate autonomous system set path information. Choices: false true
attribute_map string	Name of the route map used to set the attribute of the aggregate route.
match_map string	Name of the route map used to filter the contributors of the aggregate route.
summary_only boolean	Filters all more-specific routes from updates. Choices: false true
as_number string	Autonomous system number.
bgp_params dictionary	BGP parameters.
additional_paths string	BGP additional-paths commands Choices: "install" "send" "receive"
advertise_inactive boolean	Advertise BGP routes even if they are inactive in RIB. Choices: false true
allowas_in dictionary	Allow local-as in updates.
count integer	Number of local ASNs allowed in a BGP update.
set boolean	When true, it is set. Choices: false true
always_compare_med boolean	BGP Always Compare MED Choices: false true
asn string	AS Number notation. Choices: "asdot" "asplain"
auto_local_addr boolean	Automatically determine the local address to be used for the non-transport AF. Choices: false true
bestpath dictionary	Select the bestpath selection algorithim for BGP routes.
as_path string	Select the bestpath selection based on as-path. Choices: "ignore" "multipath_relax"
ecmp_fast boolean	Tie-break BGP paths in a ECMP group based on the order of arrival. Choices: false true
med dictionary	MED attribute
confed boolean	MED Confed. Choices: false true
missing_as_worst boolean	MED missing-as-worst. Choices: false true
skip boolean	skip one of the tie breaking rules in the bestpath selection. Choices: false true
tie_break string	Configure the tie-break option for BGP bestpath selection. Choices: "cluster_list_length" "router_id"
client_to_client boolean	client to client configuration. Choices: false true
cluster_id string	Cluster ID of this router acting as a route reflector.
confederation dictionary	confederation.
identifier string	Confederation identifier.
peers string	Confederation peers.
control_plane_filter boolean	Control plane filter for BGP. Choices: false true
convergence dictionary	Bgp convergence parameters.
slow_peer boolean	Maximum amount of time to wait for slow peers to estabilsh session. Choices: false true
time integer	time in secs
default string	Default neighbor configuration commands. Choices: "ipv4_unicast" "ipv6_unicast"
enforce_first_as boolean	Enforce the First AS for EBGP routes(default). Choices: false true
host_routes boolean	BGP host routes configuration. Choices: false true
labeled_unicast string	Labeled Unicast. Choices: "ip" "tunnel"
listen dictionary	BGP listen.
limit integer	Set limit on the number of dynamic BGP peers allowed.
range dictionary	Subnet Range to be associated with the peer group.
address string	Address prefix
peer_group dictionary	Name of peer group.
name string	name.
peer_filter string	Name of peer filter.
remote_as string	Neighbor AS number
log_neighbor_changes boolean	Log neighbor up/down events. Choices: false true
missing_policy dictionary	Missing policy override configuration commands.
action string	Missing policy action options. Choices: "deny" "permit" "deny-in-out"
direction string	Missing policy direction options. Choices: "in" "out"
monitoring boolean	Enable Bgp monitoring for all/specified stations. Choices: false true
next_hop_unchanged boolean	Preserve original nexthop while advertising routes to eBGP peers. Choices: false true
redistribute_internal boolean	Redistribute internal BGP routes. Choices: false true
route string	Configure route-map for route installation.
route_reflector dictionary	Configure route reflector options
preserve boolean	preserve route attributes, overwriting route-map changes Choices: false true
set boolean	When true route_reflector is set. Choices: false true
transport integer	Configure transport port for TCP session
default_metric integer	Default metric.
distance dictionary	Define an administrative distance.
external integer	distance for external routes.
internal integer	distance for internal routes.
local integer	distance for local routes.
graceful_restart dictionary	Enable graceful restart mode.
restart_time integer	Set the max time needed to restart and come back up.
set boolean	When true, graceful restart is set. Choices: false true
stalepath_time integer	Set the max time to hold onto restarting peer stale paths.
graceful_restart_helper boolean	Enable graceful restart helper mode. Choices: false true
maximum_paths dictionary	Maximum number of equal cost paths.
max_equal_cost_paths integer	Value for maximum number of equal cost paths.
max_installed_ecmp_paths integer	Value for maximum number of installed ECMP routes.
monitoring dictionary	BGP monitoring protocol configuration.
port integer	Configure the BGP monitoring protocol port number <1024-65535>.
received string	BGP monitoring protocol received route selection. Choices: "post_policy" "pre_policy"
station string	BGP monitoring station configuration.
timestamp string	BGP monitoring protocol Per-Peer Header timestamp behavior. Choices: "none" "send_time"
neighbor aliases: neighbors list / elements=dictionary	Configure routing for a network.
additional_paths string	BGP additional-paths commands. Choices: "send" "receive"
allowas_in dictionary	Allow local-as in updates.
count integer	Number of local ASNs allowed in a BGP update.
set boolean	When true, it is set. Choices: false true
auto_local_addr boolean	Automatically determine the local address to be used for the non-transport AF. Choices: false true
bfd string	Configure BFD fallover for this peer Choices: "enable" "c_bit"
default_originate dictionary	Originate default route to this neighbor.
always boolean	Always originate default route to this neighbor. Choices: false true
route_map string	Route map reference.
description string	Text describing the neighbor.
dont_capability_negotiate boolean	Donot perform Capability Negotiation with this neighbor. Choices: false true
ebgp_multihop dictionary	Allow BGP connections to indirectly connected external peers.
set boolean	If true, ttl is not set. Choices: false true
ttl integer	Time-to-live in the range 1-255 hops.
encryption_password dictionary	Password to use in computation of MD5 hash.
password string	password (up to 80 chars).
type integer	Encryption type. Choices: 0 7
enforce_first_as boolean	Enforce the First AS for EBGP routes(default). Choices: false true
export_localpref integer	Override localpref when exporting to an internal peer.
fall_over boolean	Configure BFD protocol options for this peer. Choices: false true
graceful_restart boolean	Enable graceful restart mode. Choices: false true
graceful_restart_helper boolean	Enable graceful restart helper mode. Choices: false true
idle_restart_timer integer	Neighbor idle restart timer.
import_localpref integer	Override localpref when importing from an external peer.
link_bandwidth dictionary	Enable link bandwidth community for routes to this peer.
auto boolean	Enable link bandwidth auto generation for routes from this peer. Choices: false true
default string	Enable link bandwidth default generation for routes from this peer.
set boolean	If true, set link bandwidth Choices: false true
update_delay integer	Delay outbound route updates.
local_as dictionary	Configure local AS number advertised to peer.
as_number string	AS number.
fallback boolean	Prefer router AS Number over local AS Number. Choices: false true
local_v6_addr string	The local IPv6 address of the neighbor in A:B:C:D:E:F:G:H format.
maximum_accepted_routes dictionary	Maximum number of routes accepted from this peer.
count integer	Maximum number of accepted routes (0 means unlimited).
warning_limit integer	Maximum number of accepted routes after which a warning is issued. (0 means never warn)
maximum_received_routes dictionary	Maximum number of routes received from this peer.
count integer	Maximum number of routes (0 means unlimited).
warning_limit dictionary	Percentage of maximum-routes at which warning is to be issued.
limit_count integer	Number of routes at which to warn.
limit_percent integer	Percentage of maximum number of routes at which to warn( 1-100).
warning_only boolean	Only warn, no restart, if max route limit exceeded. Choices: false true
metric_out integer	MED value to advertise to peer.
monitoring boolean	Enable BGP Monitoring Protocol for this peer. Choices: false true
neighbor_address aliases: peer string	Neighbor address or peer group.
next_hop_self boolean	Always advertise this router address as the BGP next hop Choices: false true
next_hop_unchanged boolean	Preserve original nexthop while advertising routes to eBGP peers. Choices: false true
next_hop_v6_address string	IPv6 next-hop address for the neighbor
out_delay integer	Delay outbound route updates.
peer_group string	Name of the peer group.
prefix_list dictionary	Prefix list reference.
direction string	Configure an inbound/outbound prefix-list. Choices: "in" "out"
name string	prefix list name.
remote_as string	Neighbor Autonomous System.
remove_private_as dictionary	Remove private AS number from updates to this peer.
all boolean	Remove private AS number. Choices: false true
replace_as boolean	Replace private AS number with local AS number. Choices: false true
set boolean	If true, set remove_private_as. Choices: false true
route_map dictionary	Route map reference.
direction string	Configure an inbound/outbound route-map. Choices: "in" "out"
name string	Route map name.
route_reflector_client boolean	Configure peer as a route reflector client. Choices: false true
route_to_peer boolean	Use routing table information to reach the peer. Choices: false true
send_community dictionary	Send community attribute to this neighbor.
community_attribute string	Type of community attributes to send to this neighbor.
divide string	link-bandwidth divide attribute. Choices: "equal" "ratio"
link_bandwidth_attribute string	cumulative/aggregate attribute to be sent. Choices: "aggregate" "divide"
set boolean	Enable send-community Choices: false true
speed string	Reference link speed in bits/second
sub_attribute string	Attribute to be sent to the neighbor. Choices: "extended" "link-bandwidth" "standard"
shutdown boolean	Administratively shut down this neighbor. Choices: false true
soft_recognition string	Configure how to handle routes that fail import. Choices: "all" "None"
timers dictionary	Timers.
holdtime integer	Hold time in secs.
keepalive integer	Keep Alive Interval in secs.
transport dictionary	Configure transport options for TCP session.
connection_mode string	Configure connection-mode for TCP session.
remote_port integer	Configure BGP peer TCP port to connect to.
ttl integer	BGP ttl security check
update_source string	Specify the local source interface for peer BGP sessions.
weight integer	Weight to assign.
network aliases: networks list / elements=dictionary	Configure routing for a network.
address string	address prefix.
route_map string	Name of route map.
redistribute list / elements=dictionary	Redistribute routes in to BGP.
isis_level string	Applicable for isis routes. Specify isis route level. Choices: "level-1" "level-2" "level-1-2"
ospf_route string	ospf route options. Choices: "internal" "external" "nssa_external_1" "nssa_external_2"
protocol string	Routes to be redistributed. Choices: "isis" "ospfv3" "ospf" "attached-host" "connected" "rip" "static"
route_map string	Route map reference.
route_target dictionary	Route target.
action string	Route action. Choices: "both" "import" "export"
target string	Route Target.
router_id string	Router id.
shutdown boolean	When true, shut down BGP. Choices: false true
timers dictionary	Timers.
holdtime integer	Hold time in secs.
keepalive integer	Keep Alive Interval in secs.
ucmp dictionary	Configure unequal cost multipathing.
fec dictionary	Configure UCMP fec utilization threshold.
clear integer	UCMP FEC utilization Clear thresholds.
trigger integer	UCMP fec utilization too high threshold.
link_bandwidth dictionary	Configure link-bandwidth propagation delay.
mode string	UCMP link bandwidth mode Choices: "encoding_weighted" "recursive"
update_delay integer	Link Bandwidth Advertisement delay.
mode dictionary	UCMP mode.
nexthops integer	Value for total number UCMP nexthops.
set boolean	If true, ucmp mode is set to 1. Choices: false true
update dictionary	Configure BGP update generation.
batch_size integer	batch size for FIB route acknowledgements.
wait_for string	wait for options before converge or synchronize. Choices: "wait_for_convergence" "wait_install"
vlan integer	Configure MAC VRF BGP for single VLAN support.
vlan_aware_bundle string	Configure MAC VRF BGP for multiple VLAN support.
vrfs list / elements=dictionary	Configure BGP in a VRF.
access_group list / elements=dictionary	ip/ipv6 access list configuration.
acl_name string	access list name.
afi string	Specify ip/ipv6. Choices: "ipv4" "ipv6"
direction string	direction of packets.
aggregate_address list / elements=dictionary	Configure aggregate address.
address string	ipv4/ipv6 address prefix.
advertise_only boolean	Advertise without installing the generated blackhole route in FIB. Choices: false true
as_set boolean	Generate autonomous system set path information. Choices: false true
attribute_map string	Name of the route map used to set the attribute of the aggregate route.
match_map string	Name of the route map used to filter the contributors of the aggregate route.
summary_only boolean	Filters all more-specific routes from updates. Choices: false true
bgp_params dictionary	BGP parameters.
additional_paths string	BGP additional-paths commands Choices: "install" "send" "receive"
advertise_inactive boolean	Advertise BGP routes even if they are inactive in RIB. Choices: false true
allowas_in dictionary	Allow local-as in updates.
count integer	Number of local ASNs allowed in a BGP update.
set boolean	When true, it is set. Choices: false true
always_compare_med boolean	BGP Always Compare MED Choices: false true
asn string	AS Number notation. Choices: "asdot" "asplain"
auto_local_addr boolean	Automatically determine the local address to be used for the non-transport AF. Choices: false true
bestpath dictionary	Select the bestpath selection algorithim for BGP routes.
as_path string	Select the bestpath selection based on as-path. Choices: "ignore" "multipath_relax"
ecmp_fast boolean	Tie-break BGP paths in a ECMP group based on the order of arrival. Choices: false true
med dictionary	MED attribute
confed boolean	MED Confed. Choices: false true
missing_as_worst boolean	MED missing-as-worst. Choices: false true
skip boolean	skip one of the tie breaking rules in the bestpath selection. Choices: false true
tie_break string	Configure the tie-break option for BGP bestpath selection. Choices: "cluster_list_length" "router_id"
client_to_client boolean	client to client configuration. Choices: false true
cluster_id string	Cluster ID of this router acting as a route reflector.
confederation dictionary	confederation.
identifier string	Confederation identifier.
peers string	Confederation peers.
control_plane_filter boolean	Control plane filter for BGP. Choices: false true
convergence dictionary	Bgp convergence parameters.
slow_peer boolean	Maximum amount of time to wait for slow peers to estabilsh session. Choices: false true
time integer	time in secs
default string	Default neighbor configuration commands. Choices: "ipv4_unicast" "ipv6_unicast"
enforce_first_as boolean	Enforce the First AS for EBGP routes(default). Choices: false true
host_routes boolean	BGP host routes configuration. Choices: false true
labeled_unicast string	Labeled Unicast. Choices: "ip" "tunnel"
listen dictionary	BGP listen.
limit integer	Set limit on the number of dynamic BGP peers allowed.
range dictionary	Subnet Range to be associated with the peer group.
address string	Address prefix
peer_group dictionary	Name of peer group.
name string	name.
peer_filter string	Name of peer filter.
remote_as string	Neighbor AS number
log_neighbor_changes boolean	Log neighbor up/down events. Choices: false true
missing_policy dictionary	Missing policy override configuration commands.
action string	Missing policy action options. Choices: "deny" "permit" "deny-in-out"
direction string	Missing policy direction options. Choices: "in" "out"
monitoring boolean	Enable Bgp monitoring for all/specified stations. Choices: false true
next_hop_unchanged boolean	Preserve original nexthop while advertising routes to eBGP peers. Choices: false true
redistribute_internal boolean	Redistribute internal BGP routes. Choices: false true
route string	Configure route-map for route installation.
route_reflector dictionary	Configure route reflector options
preserve boolean	preserve route attributes, overwriting route-map changes Choices: false true
set boolean	When true route_reflector is set. Choices: false true
transport integer	Configure transport port for TCP session
default_metric integer	Default metric.
distance dictionary	Define an administrative distance.
external integer	distance for external routes.
internal integer	distance for internal routes.
local integer	distance for local routes.
graceful_restart dictionary	Enable graceful restart mode.
restart_time integer	Set the max time needed to restart and come back up.
set boolean	When true, graceful restart is set. Choices: false true
stalepath_time integer	Set the max time to hold onto restarting peer stale paths.
graceful_restart_helper boolean	Enable graceful restart helper mode. Choices: false true
maximum_paths dictionary	Maximum number of equal cost paths.
max_equal_cost_paths integer	Value for maximum number of equal cost paths.
max_installed_ecmp_paths integer	Value for maximum number of installed ECMP routes.
neighbor aliases: neighbors list / elements=dictionary	Configure routing for a network.
additional_paths string	BGP additional-paths commands. Choices: "send" "receive"
allowas_in dictionary	Allow local-as in updates.
count integer	Number of local ASNs allowed in a BGP update.
set boolean	When true, it is set. Choices: false true
auto_local_addr boolean	Automatically determine the local address to be used for the non-transport AF. Choices: false true
bfd string	Configure BFD fallover for this peer Choices: "enable" "c_bit"
default_originate dictionary	Originate default route to this neighbor.
always boolean	Always originate default route to this neighbor. Choices: false true
route_map string	Route map reference.
description string	Text describing the neighbor.
dont_capability_negotiate boolean	Donot perform Capability Negotiation with this neighbor. Choices: false true
ebgp_multihop dictionary	Allow BGP connections to indirectly connected external peers.
set boolean	If true, ttl is not set. Choices: false true
ttl integer	Time-to-live in the range 1-255 hops.
encryption_password dictionary	Password to use in computation of MD5 hash.
password string	password (up to 80 chars).
type integer	Encryption type. Choices: 0 7
enforce_first_as boolean	Enforce the First AS for EBGP routes(default). Choices: false true
export_localpref integer	Override localpref when exporting to an internal peer.
fall_over boolean	Configure BFD protocol options for this peer. Choices: false true
graceful_restart boolean	Enable graceful restart mode. Choices: false true
graceful_restart_helper boolean	Enable graceful restart helper mode. Choices: false true
idle_restart_timer integer	Neighbor idle restart timer.
import_localpref integer	Override localpref when importing from an external peer.
link_bandwidth dictionary	Enable link bandwidth community for routes to this peer.
auto boolean	Enable link bandwidth auto generation for routes from this peer. Choices: false true
default string	Enable link bandwidth default generation for routes from this peer.
set boolean	If true, set link bandwidth Choices: false true
update_delay integer	Delay outbound route updates.
local_as dictionary	Configure local AS number advertised to peer.
as_number string	AS number.
fallback boolean	Prefer router AS Number over local AS Number. Choices: false true
local_v6_addr string	The local IPv6 address of the neighbor in A:B:C:D:E:F:G:H format.
maximum_accepted_routes dictionary	Maximum number of routes accepted from this peer.
count integer	Maximum number of accepted routes (0 means unlimited).
warning_limit integer	Maximum number of accepted routes after which a warning is issued. (0 means never warn)
maximum_received_routes dictionary	Maximum number of routes received from this peer.
count integer	Maximum number of routes (0 means unlimited).
warning_limit dictionary	Percentage of maximum-routes at which warning is to be issued.
limit_count integer	Number of routes at which to warn.
limit_percent integer	Percentage of maximum number of routes at which to warn( 1-100).
warning_only boolean	Only warn, no restart, if max route limit exceeded. Choices: false true
metric_out integer	MED value to advertise to peer.
monitoring boolean	Enable BGP Monitoring Protocol for this peer. Choices: false true
neighbor_address aliases: peer string	Neighbor address or peer group.
next_hop_self boolean	Always advertise this router address as the BGP next hop Choices: false true
next_hop_unchanged boolean	Preserve original nexthop while advertising routes to eBGP peers. Choices: false true
next_hop_v6_address string	IPv6 next-hop address for the neighbor
out_delay integer	Delay outbound route updates.
peer_group string	Name of the peer group.
prefix_list dictionary	Prefix list reference.
direction string	Configure an inbound/outbound prefix-list. Choices: "in" "out"
name string	prefix list name.
remote_as string	Neighbor Autonomous System.
remove_private_as dictionary	Remove private AS number from updates to this peer.
all boolean	Remove private AS number. Choices: false true
replace_as boolean	Replace private AS number with local AS number. Choices: false true
set boolean	If true, set remove_private_as. Choices: false true
route_map dictionary	Route map reference.
direction string	Configure an inbound/outbound route-map. Choices: "in" "out"
name string	Route map name.
route_reflector_client boolean	Configure peer as a route reflector client. Choices: false true
route_to_peer boolean	Use routing table information to reach the peer. Choices: false true
send_community dictionary	Send community attribute to this neighbor.
community_attribute string	Type of community attributes to send to this neighbor.
divide string	link-bandwidth divide attribute. Choices: "equal" "ratio"
link_bandwidth_attribute string	cumulative/aggregate attribute to be sent. Choices: "aggregate" "divide"
speed string	Reference link speed in bits/second
sub_attribute string	Attribute to be sent to the neighbor. Choices: "extended" "link-bandwidth" "standard"
shutdown boolean	Administratively shut down this neighbor. Choices: false true
soft_recognition string	Configure how to handle routes that fail import. Choices: "all" "None"
timers dictionary	Timers.
holdtime integer	Hold time in secs.
keepalive integer	Keep Alive Interval in secs.
transport dictionary	Configure transport options for TCP session.
connection_mode string	Configure connection-mode for TCP session.
remote_port integer	Configure BGP peer TCP port to connect to.
ttl integer	BGP ttl security check
update_source string	Specify the local source interface for peer BGP sessions.
weight integer	Weight to assign.
network aliases: networks list / elements=dictionary	Configure routing for a network.
address string	address prefix.
route_map string	Name of route map.
redistribute list / elements=dictionary	Redistribute routes in to BGP.
isis_level string	Applicable for isis routes. Specify isis route level. Choices: "level-1" "level-2" "level-1-2"
ospf_route string	ospf route options. Choices: "internal" "external" "nssa_external_1" "nssa_external_2"
protocol string	Routes to be redistributed. Choices: "isis" "ospfv3" "ospf" "attached-host" "connected" "rip" "static"
route_map string	Route map reference.
route_target dictionary	Route target.
action string	Route action. Choices: "both" "import" "export"
imported_route boolean	Export routes imported from the same Afi/Safi. Choices: false true
route_map string	Name of a route map.
target string	Route Target.
type string	Type of address fmaily Choices: "evpn" "vpn-ipv4" "vpn-ipv6"
router_id string	Router id.
shutdown boolean	When true, shut down BGP. Choices: false true
timers dictionary	Timers.
holdtime integer	Hold time in secs.
keepalive integer	Keep Alive Interval in secs.
ucmp dictionary	Configure unequal cost multipathing.
fec dictionary	Configure UCMP fec utilization threshold.
clear integer	UCMP FEC utilization Clear thresholds.
trigger integer	UCMP fec utilization too high threshold.
link_bandwidth dictionary	Configure link-bandwidth propagation delay.
mode string	UCMP link bandwidth mode Choices: "encoding_weighted" "recursive" "update_delay"
update_delay integer	Link Bandwidth Advertisement delay.
mode dictionary	UCMP mode.
nexthops integer	Value for total number UCMP nexthops.
set boolean	If true, ucmp mode is set to 1. Choices: false true
update dictionary	Configure BGP update generation.
batch_size integer	batch size for FIB route acknowledgements.
wait_for string	wait for options before converge or synchronize. Choices: "wait_for_convergence" "wait_install"
vrf string	VRF name.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. State purged removes all the BGP configurations from the target device. Use caution with this state.(‘no router bgp <x>’) State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context. Running states deleted and replaced will result in an error if there are address-family configuration lines present under vrf context that is is to be removed. Please use the arista.eos.eos_bgp_address_family module for prior cleanup. Refer to examples for more details. Choices: "deleted" "merged" ← (default) "overridden" "purged" "replaced" "gathered" "rendered" "parsed"

Notes

Note

• Tested against Arista EOS 4.24.6F

• This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using Merged

# Before state:
# -------------
# veos(config)#show running-config | section bgp
# veos(config)#

- name: Merge provided configuration with device configuration
  arista.eos.eos_bgp_global:
    config:
      as_number: "100"
      bgp_params:
        host_routes: true
        convergence:
          slow_peer: true
          time: 6
        additional_paths: "send"
        log_neighbor_changes: true
      maximum_paths:
        max_equal_cost_paths: 55
      aggregate_address:
        - address: "1.2.1.0/24"
          as_set: true
          match_map: "match01"
        - address: "5.2.1.0/24"
          attribute_map: "attrmatch01"
          advertise_only: true
      redistribute:
        - protocol: "static"
          route_map: "map_static"
        - protocol: "attached-host"
      distance:
        internal: 50
      neighbor:
        - peer: "10.1.3.2"
          allowas_in:
            set: true
          default_originate:
            always: true
          dont_capability_negotiate: true
          export_localpref: 4000
          maximum_received_routes:
            count: 500
            warning_limit:
              limit_percent: 5
          next_hop_unchanged: true
          prefix_list:
            name: "prefix01"
            direction: "out"
        - neighbor_address: "peer1"
          fall_over: true
          link_bandwidth:
            update_delay: 5
          monitoring: true
          send_community:
            community_attribute: "extended"
            sub_attribute: "link-bandwidth"
            link_bandwidth_attribute: "aggregate"
            speed: "600"
      vlan: 5
    state: merged

# Task output:
# ------------
# before: {}
#
# commands:
# - router bgp 100
#   - neighbor 10.1.3.2 allowas-in
#   - neighbor 10.1.3.2 default-originate always
#   - neighbor 10.1.3.2 dont-capability-negotiate
#   - neighbor 10.1.3.2 export-localpref 4000
#   - neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#   - neighbor 10.1.3.2 next-hop-unchanged
#   - neighbor 10.1.3.2 prefix-list prefix01 out
#   - neighbor peer1 fall-over bfd
#   - neighbor peer1 link-bandwidth update-delay 5
#   - neighbor peer1 monitoring
#   - neighbor peer1 send-community extended link-bandwidth aggregate 600
#   - redistribute static route-map map_static
#   - redistribute attached-host
#   - aggregate-address 1.2.1.0/24 as-set match-map match01
#   - aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#   - bgp host-routes fib direct-install
#   - bgp convergence slow-peer time 6
#   - bgp additional-paths send any
#   - bgp log-neighbor-changes
#   - maximum-paths 55
#   - distance bgp 50
#   - vlan 5
#
# after:
#     aggregate_address:
#     - address: 1.2.1.0/24
#       as_set: true
#       match_map: match01
#     - address: 5.2.1.0/24
#       advertise_only: true
#       attribute_map: attrmatch01
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     distance:
#       external: 50
#       internal: 50
#       local: 50
#     maximum_paths:
#       max_equal_cost_paths: 55
#     neighbor:
#     - fall_over: true
#       link_bandwidth:
#         set: true
#         update_delay: 5
#       maximum_received_routes:
#         count: 12000
#       monitoring: true
#       neighbor_address: peer1
#       peer_group: peer1
#       send_community:
#         community_attribute: extended
#         link_bandwidth_attribute: aggregate
#         speed: '600'
#         sub_attribute: link-bandwidth
#     - allowas_in:
#         count: 3
#       default_originate:
#         always: true
#       dont_capability_negotiate: true
#       export_localpref: 4000
#       maximum_received_routes:
#         count: 500
#         warning_limit:
#           limit_percent: 5
#       neighbor_address: 10.1.3.2
#       next_hop_unchanged: true
#     redistribute:
#     - protocol: static
#       route_map: map_static
#     - protocol: attached-host
#     vlan: 5

# After state:
# ------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    distance bgp 50 50 50
#    maximum-paths 55
#    bgp additional-paths send any
#    neighbor peer1 peer group
#    neighbor peer1 link-bandwidth update-delay 5
#    neighbor peer1 fall-over bfd
#    neighbor peer1 monitoring
#    neighbor peer1 send-community extended link-bandwidth aggregate 600
#    neighbor peer1 maximum-routes 12000
#    neighbor 10.1.3.2 export-localpref 4000
#    neighbor 10.1.3.2 next-hop-unchanged
#    neighbor 10.1.3.2 dont-capability-negotiate
#    neighbor 10.1.3.2 allowas-in 3
#    neighbor 10.1.3.2 default-originate always
#    neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#    aggregate-address 1.2.1.0/24 as-set match-map match01
#    aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#    redistribute static route-map map_static
#    redistribute attached-host
#    !
#    vlan 5
#    !
#    address-family ipv4
#       neighbor 10.1.3.2 prefix-list prefix01 out

# Using replaced:

# Before state:
# -------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    distance bgp 50 50 50
#    maximum-paths 55
#    bgp additional-paths send any
#    neighbor peer1 peer group
#    neighbor peer1 link-bandwidth update-delay 5
#    neighbor peer1 fall-over bfd
#    neighbor peer1 monitoring
#    neighbor peer1 send-community extended link-bandwidth aggregate 600
#    neighbor peer1 maximum-routes 12000
#    neighbor 10.1.3.2 export-localpref 4000
#    neighbor 10.1.3.2 next-hop-unchanged
#    neighbor 10.1.3.2 dont-capability-negotiate
#    neighbor 10.1.3.2 allowas-in 3
#    neighbor 10.1.3.2 default-originate always
#    neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#    aggregate-address 1.2.1.0/24 as-set match-map match01
#    aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#    redistribute static route-map map_static
#    redistribute attached-host
#    !
#    vlan 5
#    !
#    address-family ipv4
#       neighbor 10.1.3.2 prefix-list prefix01 out
#    !
#    vrf vrf01
#       route-target import 54:11
#       neighbor 12.1.3.2 dont-capability-negotiate
#       neighbor 12.1.3.2 allowas-in 3
#       neighbor 12.1.3.2 default-originate always
#       neighbor 12.1.3.2 maximum-routes 12000

- name: replace provided configuration with device configuration
  arista.eos.eos_bgp_global:
    config:
      as_number: "100"
      bgp_params:
        host_routes: true
        convergence:
          slow_peer: true
          time: 6
        additional_paths: "send"
        log_neighbor_changes: true
      vrfs:
        - vrf: "vrf01"
          maximum_paths:
            max_equal_cost_paths: 55
          aggregate_address:
            - address: "1.2.1.0/24"
              as_set: true
              match_map: "match01"
            - address: "5.2.1.0/24"
              attribute_map: "attrmatch01"
              advertise_only: true
          redistribute:
            - protocol: "static"
              route_map: "map_static"
            - protocol: "attached-host"
          distance:
            internal: 50
          neighbor:
            - neighbor_address: "10.1.3.2"
              allowas_in:
                set: true
              default_originate:
                always: true
              dont_capability_negotiate: true
              export_localpref: 4000
              maximum_received_routes:
                count: 500
                warning_limit:
                  limit_percent: 5
              next_hop_unchanged: true
              prefix_list:
                name: "prefix01"
                direction: "out"
            - neighbor_address: "peer1"
              fall_over: true
              link_bandwidth:
                update_delay: 5
              monitoring: true
              send_community:
                community_attribute: "extended"
                sub_attribute: "link-bandwidth"
                link_bandwidth_attribute: "aggregate"
                speed: "600"
    state: replaced

# Task output:
# ------------

# before:
#     aggregate_address:
#     - address: 1.2.1.0/24
#       as_set: true
#       match_map: match01
#     - address: 5.2.1.0/24
#       advertise_only: true
#       attribute_map: attrmatch01
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     distance:
#       external: 50
#       internal: 50
#       local: 50
#     maximum_paths:
#       max_equal_cost_paths: 55
#     neighbor:
#     - fall_over: true
#       link_bandwidth:
#         set: true
#         update_delay: 5
#       maximum_received_routes:
#         count: 12000
#       monitoring: true
#       neighbor_address: peer1
#       peer_group: peer1
#       send_community:
#         community_attribute: extended
#         link_bandwidth_attribute: aggregate
#         speed: '600'
#         sub_attribute: link-bandwidth
#     - allowas_in:
#         count: 3
#       default_originate:
#         always: true
#       dont_capability_negotiate: true
#       export_localpref: 4000
#       maximum_received_routes:
#         count: 500
#         warning_limit:
#           limit_percent: 5
#       neighbor_address: 10.1.3.2
#       next_hop_unchanged: true
#     redistribute:
#     - protocol: static
#       route_map: map_static
#     - protocol: attached-host
#     vlan: 5
#     vrfs:
#     - neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         maximum_received_routes:
#           count: 12000
#         neighbor_address: 12.1.3.2
#       route_target:
#         action: import
#         target: '54:11'
#       vrf: vrf01
#
# commands:
# - router bgp 100
# - vrf vrf01
# - no route-target import 54:11
# - neighbor 10.1.3.2 allowas-in
# - neighbor 10.1.3.2 default-originate always
# - neighbor 10.1.3.2 dont-capability-negotiate
# - neighbor 10.1.3.2 export-localpref 4000
# - neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
# - neighbor 10.1.3.2 next-hop-unchanged
# - neighbor 10.1.3.2 prefix-list prefix01 out
# - neighbor peer1 fall-over bfd
# - neighbor peer1 link-bandwidth update-delay 5
# - neighbor peer1 monitoring
# - neighbor peer1 send-community extended link-bandwidth aggregate 600
# - no neighbor 12.1.3.2
# - redistribute static route-map map_static
# - redistribute attached-host
# - aggregate-address 1.2.1.0/24 as-set match-map match01
# - aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
# - maximum-paths 55
# - distance bgp 50
# - exit
# - no neighbor peer1 peer group
# - no neighbor peer1 link-bandwidth update-delay 5
# - no neighbor peer1 fall-over bfd
# - no neighbor peer1 monitoring
# - no neighbor peer1 send-community extended link-bandwidth aggregate 600
# - no neighbor peer1 maximum-routes 12000
# - no neighbor 10.1.3.2
# - no redistribute static route-map map_static
# - no redistribute attached-host
# - no aggregate-address 1.2.1.0/24 as-set match-map match01
# - no aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
# - bgp host-routes fib direct-install
# - bgp log-neighbor-changes
# - no distance bgp 50 50 50
# - no maximum-paths 55
# - no vlan 5
#
# after:
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     vrfs:
#     - aggregate_address:
#       - address: 1.2.1.0/24
#         as_set: true
#         match_map: match01
#       - address: 5.2.1.0/24
#         advertise_only: true
#         attribute_map: attrmatch01
#       distance:
#         external: 50
#         internal: 50
#         local: 50
#       maximum_paths:
#         max_equal_cost_paths: 55
#       neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         export_localpref: 4000
#         maximum_received_routes:
#           count: 500
#           warning_limit:
#             limit_percent: 5
#         neighbor_address: 10.1.3.2
#         next_hop_unchanged: true
#       redistribute:
#       - protocol: static
#         route_map: map_static
#       - protocol: attached-host
#       vrf: vrf01
#
# After state:
# ------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    bgp additional-paths send any
#    !
#    vrf vrf01
#       distance bgp 50 50 50
#       maximum-paths 55
#       neighbor 10.1.3.2 export-localpref 4000
#       neighbor 10.1.3.2 next-hop-unchanged
#       neighbor 10.1.3.2 dont-capability-negotiate
#       neighbor 10.1.3.2 allowas-in 3
#       neighbor 10.1.3.2 default-originate always
#       neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#       aggregate-address 1.2.1.0/24 as-set match-map match01
#       aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#       redistribute static route-map map_static
#       redistribute attached-host
#       !
#       address-family ipv4
#          neighbor 10.1.3.2 prefix-list prefix01 out

# Using overridden:
# (Note: Overridden and replaced operations are identitical)

# Before state:
# -------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    distance bgp 50 50 50
#    maximum-paths 55
#    bgp additional-paths send any
#    neighbor peer1 peer group
#    neighbor peer1 link-bandwidth update-delay 5
#    neighbor peer1 fall-over bfd
#    neighbor peer1 monitoring
#    neighbor peer1 send-community extended link-bandwidth aggregate 600
#    neighbor peer1 maximum-routes 12000
#    neighbor 10.1.3.2 export-localpref 4000
#    neighbor 10.1.3.2 next-hop-unchanged
#    neighbor 10.1.3.2 dont-capability-negotiate
#    neighbor 10.1.3.2 allowas-in 3
#    neighbor 10.1.3.2 default-originate always
#    neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#    aggregate-address 1.2.1.0/24 as-set match-map match01
#    aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#    redistribute static route-map map_static
#    redistribute attached-host
#    !
#    vlan 5
#    !
#    address-family ipv4
#       neighbor 10.1.3.2 prefix-list prefix01 out
#    !
#    vrf vrf01
#       route-target import 54:11
#       neighbor 12.1.3.2 dont-capability-negotiate
#       neighbor 12.1.3.2 allowas-in 3
#       neighbor 12.1.3.2 default-originate always
#       neighbor 12.1.3.2 maximum-routes 12000

- name: override running configuration with configuration
  arista.eos.eos_bgp_global:
    config:
      as_number: "100"
      bgp_params:
        host_routes: true
        convergence:
          slow_peer: true
          time: 6
        additional_paths: "send"
        log_neighbor_changes: true
      vrfs:
        - vrf: "vrf01"
          maximum_paths:
            max_equal_cost_paths: 55
          aggregate_address:
            - address: "1.2.1.0/24"
              as_set: true
              match_map: "match01"
            - address: "5.2.1.0/24"
              attribute_map: "attrmatch01"
              advertise_only: true
          redistribute:
            - protocol: "static"
              route_map: "map_static"
            - protocol: "attached-host"
          distance:
            internal: 50
          neighbor:
            - neighbor_address: "10.1.3.2"
              allowas_in:
                set: true
              default_originate:
                always: true
              dont_capability_negotiate: true
              export_localpref: 4000
              maximum_received_routes:
                count: 500
                warning_limit:
                  limit_percent: 5
              next_hop_unchanged: true
              prefix_list:
                name: "prefix01"
                direction: "out"
            - neighbor_address: "peer1"
              fall_over: true
              link_bandwidth:
                update_delay: 5
              monitoring: true
              send_community:
                community_attribute: "extended"
                sub_attribute: "link-bandwidth"
                link_bandwidth_attribute: "aggregate"
                speed: "600"
    state: overridden

# Task output:
# ------------
# before:
#     aggregate_address:
#     - address: 1.2.1.0/24
#       as_set: true
#       match_map: match01
#     - address: 5.2.1.0/24
#       advertise_only: true
#       attribute_map: attrmatch01
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     distance:
#       external: 50
#       internal: 50
#       local: 50
#     maximum_paths:
#       max_equal_cost_paths: 55
#     neighbor:
#     - fall_over: true
#       link_bandwidth:
#         set: true
#         update_delay: 5
#       maximum_received_routes:
#         count: 12000
#       monitoring: true
#       neighbor_address: peer1
#       peer_group: peer1
#       send_community:
#         community_attribute: extended
#         link_bandwidth_attribute: aggregate
#         speed: '600'
#         sub_attribute: link-bandwidth
#     - allowas_in:
#         count: 3
#       default_originate:
#         always: true
#       dont_capability_negotiate: true
#       export_localpref: 4000
#       maximum_received_routes:
#         count: 500
#         warning_limit:
#           limit_percent: 5
#       neighbor_address: 10.1.3.2
#       next_hop_unchanged: true
#     redistribute:
#     - protocol: static
#       route_map: map_static
#     - protocol: attached-host
#     vlan: 5
#     vrfs:
#     - neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         maximum_received_routes:
#           count: 12000
#         neighbor_address: 12.1.3.2
#       route_target:
#         action: import
#         target: '54:11'
#       vrf: vrf01
#
# commands:
# - router bgp 100
# - vrf vrf01
# - no route-target import 54:11
# - neighbor 10.1.3.2 allowas-in
# - neighbor 10.1.3.2 default-originate always
# - neighbor 10.1.3.2 dont-capability-negotiate
# - neighbor 10.1.3.2 export-localpref 4000
# - neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
# - neighbor 10.1.3.2 next-hop-unchanged
# - neighbor 10.1.3.2 prefix-list prefix01 out
# - neighbor peer1 fall-over bfd
# - neighbor peer1 link-bandwidth update-delay 5
# - neighbor peer1 monitoring
# - neighbor peer1 send-community extended link-bandwidth aggregate 600
# - no neighbor 12.1.3.2
# - redistribute static route-map map_static
# - redistribute attached-host
# - aggregate-address 1.2.1.0/24 as-set match-map match01
# - aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
# - maximum-paths 55
# - distance bgp 50
# - exit
# - no neighbor peer1 peer group
# - no neighbor peer1 link-bandwidth update-delay 5
# - no neighbor peer1 fall-over bfd
# - no neighbor peer1 monitoring
# - no neighbor peer1 send-community extended link-bandwidth aggregate 600
# - no neighbor peer1 maximum-routes 12000
# - no neighbor 10.1.3.2
# - no redistribute static route-map map_static
# - no redistribute attached-host
# - no aggregate-address 1.2.1.0/24 as-set match-map match01
# - no aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
# - bgp host-routes fib direct-install
# - bgp log-neighbor-changes
# - no distance bgp 50 50 50
# - no maximum-paths 55
# - no vlan 5
#
# after:
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     vrfs:
#     - aggregate_address:
#       - address: 1.2.1.0/24
#         as_set: true
#         match_map: match01
#       - address: 5.2.1.0/24
#         advertise_only: true
#         attribute_map: attrmatch01
#       distance:
#         external: 50
#         internal: 50
#         local: 50
#       maximum_paths:
#         max_equal_cost_paths: 55
#       neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         export_localpref: 4000
#         maximum_received_routes:
#           count: 500
#           warning_limit:
#             limit_percent: 5
#         neighbor_address: 10.1.3.2
#         next_hop_unchanged: true
#       redistribute:
#       - protocol: static
#         route_map: map_static
#       - protocol: attached-host
#       vrf: vrf01
#
# After state:
# ------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    bgp additional-paths send any
#    !
#    vrf vrf01
#       distance bgp 50 50 50
#       maximum-paths 55
#       neighbor 10.1.3.2 export-localpref 4000
#       neighbor 10.1.3.2 next-hop-unchanged
#       neighbor 10.1.3.2 dont-capability-negotiate
#       neighbor 10.1.3.2 allowas-in 3
#       neighbor 10.1.3.2 default-originate always
#       neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#       aggregate-address 1.2.1.0/24 as-set match-map match01
#       aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#       redistribute static route-map map_static
#       redistribute attached-host
#       !
#       address-family ipv4
#          neighbor 10.1.3.2 prefix-list prefix01 out

# Using deleted:

# Before state:
# -------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    bgp additional-paths send any
#    !
#    vrf vrf01
#       distance bgp 50 50 50
#       maximum-paths 55
#       neighbor 10.1.3.2 export-localpref 4000
#       neighbor 10.1.3.2 next-hop-unchanged
#       neighbor 10.1.3.2 dont-capability-negotiate
#       neighbor 10.1.3.2 allowas-in 3
#       neighbor 10.1.3.2 default-originate always
#       neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#       aggregate-address 1.2.1.0/24 as-set match-map match01
#       aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#       redistribute static route-map map_static
#       redistribute attached-host
#       !

- name: Delete configuration
  arista.eos.eos_bgp_global:
    config:
      as_number: "100"
    state: deleted

# Task output:
# ------------
# before:
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     vrfs:
#     - aggregate_address:
#       - address: 1.2.1.0/24
#         as_set: true
#         match_map: match01
#       - address: 5.2.1.0/24
#         advertise_only: true
#         attribute_map: attrmatch01
#       distance:
#         external: 50
#         internal: 50
#         local: 50
#       maximum_paths:
#         max_equal_cost_paths: 55
#       neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         export_localpref: 4000
#         maximum_received_routes:
#           count: 500
#           warning_limit:
#             limit_percent: 5
#         neighbor_address: 10.1.3.2
#         next_hop_unchanged: true
#       redistribute:
#       - protocol: static
#         route_map: map_static
#       - protocol: attached-host
#       vrf: vrf01
#
# commands:
# - router bgp 100
# - no vrf vrf01
# - no bgp convergence slow-peer time 6
# - no bgp additional-paths send any
#
# after:
#  as_number: '100'

#
# After state:
# ------------
# veos(config)#show running-config | section bgp
# router bgp 100

# Using purged:

# Before state:
# -------------
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    distance bgp 50 50 50
#    maximum-paths 55
#    bgp additional-paths send any
#    neighbor peer1 peer group
#    neighbor peer1 link-bandwidth update-delay 5
#    neighbor peer1 fall-over bfd
#    neighbor peer1 monitoring
#    neighbor peer1 send-community extended link-bandwidth aggregate 600
#    neighbor peer1 maximum-routes 12000
#    neighbor 10.1.3.2 export-localpref 4000
#    neighbor 10.1.3.2 next-hop-unchanged
#    neighbor 10.1.3.2 dont-capability-negotiate
#    neighbor 10.1.3.2 allowas-in 3
#    neighbor 10.1.3.2 default-originate always
#    neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#    aggregate-address 1.2.1.0/24 as-set match-map match01
#    aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#    redistribute static route-map map_static
#    redistribute attached-host
#    !
#    vlan 5
#    !
#    address-family ipv4
#       neighbor 10.1.3.2 prefix-list prefix01 out
#    !
#    vrf vrf01
#       route-target import 54:11
#       neighbor 12.1.3.2 dont-capability-negotiate
#       neighbor 12.1.3.2 allowas-in 3
#       neighbor 12.1.3.2 default-originate always
#       neighbor 12.1.3.2 maximum-routes 12000

- name: Purge configuration
  arista.eos.eos_bgp_global:
    config:
      as_number: "100"
    state: purged


# Task output:
# ------------
# before:
#     aggregate_address:
#     - address: 1.2.1.0/24
#       as_set: true
#       match_map: match01
#     - address: 5.2.1.0/24
#       advertise_only: true
#       attribute_map: attrmatch01
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     distance:
#       external: 50
#       internal: 50
#       local: 50
#     maximum_paths:
#       max_equal_cost_paths: 55
#     neighbor:
#     - fall_over: true
#       link_bandwidth:
#         set: true
#         update_delay: 5
#       maximum_received_routes:
#         count: 12000
#       monitoring: true
#       neighbor_address: peer1
#       peer_group: peer1
#       send_community:
#         community_attribute: extended
#         link_bandwidth_attribute: aggregate
#         speed: '600'
#         sub_attribute: link-bandwidth
#     - allowas_in:
#         count: 3
#       default_originate:
#         always: true
#       dont_capability_negotiate: true
#       export_localpref: 4000
#       maximum_received_routes:
#         count: 500
#         warning_limit:
#           limit_percent: 5
#       neighbor_address: 10.1.3.2
#       next_hop_unchanged: true
#     redistribute:
#     - protocol: static
#       route_map: map_static
#     - protocol: attached-host
#     vlan: 5
#     vrfs:
#     - neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         maximum_received_routes:
#           count: 12000
#         neighbor_address: 12.1.3.2
#       route_target:
#         action: import
#         target: '54:11'
#       vrf: vrf01
#     "changed": true,
#
# commands:
# - no router bgp 100
#
# after: {}

# After state:
# ------------
# veos(config)#show running-config | section bgp
# veos(config)#

# Using rendered

- name: Render command lines for provided configuration
  arista.eos.eos_bgp_global:
    config:
      as_number: "100"
      bgp_params:
        host_routes: true
        convergence:
          slow_peer: true
          time: 6
        additional_paths: "send"
        log_neighbor_changes: true
      maximum_paths:
        max_equal_cost_paths: 55
      aggregate_address:
        - address: "1.2.1.0/24"
          as_set: true
          match_map: "match01"
        - address: "5.2.1.0/24"
          attribute_map: "attrmatch01"
          advertise_only: true
      redistribute:
        - protocol: "static"
          route_map: "map_static"
        - protocol: "attached-host"
      distance:
        internal: 50
      neighbor:
        - peer: "10.1.3.2"
          allowas_in:
            set: true
          default_originate:
            always: true
          dont_capability_negotiate: true
          export_localpref: 4000
          maximum_received_routes:
            count: 500
            warning_limit:
              limit_percent: 5
          next_hop_unchanged: true
          prefix_list:
            name: "prefix01"
            direction: "out"
        - neighbor_address: "peer1"
          fall_over: true
          link_bandwidth:
            update_delay: 5
          monitoring: true
          send_community:
            community_attribute: "extended"
            sub_attribute: "link-bandwidth"
            link_bandwidth_attribute: "aggregate"
            speed: "600"
      vlan: 5
    state: rendered

# Task output:
# ------------
# rendered:
#   - router bgp 100
#   - neighbor 10.1.3.2 allowas-in
#   - neighbor 10.1.3.2 default-originate always
#   - neighbor 10.1.3.2 dont-capability-negotiate
#   - neighbor 10.1.3.2 export-localpref 4000
#   - neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#   - neighbor 10.1.3.2 next-hop-unchanged
#   - neighbor 10.1.3.2 prefix-list prefix01 out
#   - neighbor peer1 fall-over bfd
#   - neighbor peer1 link-bandwidth update-delay 5
#   - neighbor peer1 monitoring
#   - neighbor peer1 send-community extended link-bandwidth aggregate 600
#   - redistribute static route-map map_static
#   - redistribute attached-host
#   - aggregate-address 1.2.1.0/24 as-set match-map match01
#   - aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#   - bgp host-routes fib direct-install
#   - bgp convergence slow-peer time 6
#   - bgp additional-paths send any
#   - bgp log-neighbor-changes
#   - maximum-paths 55
#   - distance bgp 50
#   - vlan 5


# Using parsed

# parsed.cfg
# ----------
# router bgp 100
#    bgp convergence slow-peer time 6
#    distance bgp 50 50 50
#    maximum-paths 55
#    bgp additional-paths send any
#    neighbor peer1 peer group
#    neighbor peer1 link-bandwidth update-delay 5
#    neighbor peer1 fall-over bfd
#    neighbor peer1 monitoring
#    neighbor peer1 send-community extended link-bandwidth aggregate 600
#    neighbor peer1 maximum-routes 12000
#    neighbor 10.1.3.2 export-localpref 4000
#    neighbor 10.1.3.2 next-hop-unchanged
#    neighbor 10.1.3.2 dont-capability-negotiate
#    neighbor 10.1.3.2 allowas-in 3
#    neighbor 10.1.3.2 default-originate always
#    neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#    aggregate-address 1.2.1.0/24 as-set match-map match01
#    aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#    redistribute static route-map map_static
#    redistribute attached-host
#    !
#    vlan 5
#    !
#    address-family ipv4
#       neighbor 10.1.3.2 prefix-list prefix01 out
#    !
#    vrf vrf01
#       route-target import 54:11
#       neighbor 12.1.3.2 dont-capability-negotiate
#       neighbor 12.1.3.2 allowas-in 3
#       neighbor 12.1.3.2 default-originate always
#       neighbor 12.1.3.2 maximum-routes 12000

- name: Parse externally provided BGP config
  arista.eos.eos_bgp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output:
# ------------

# parsed:
#     aggregate_address:
#     - address: 1.2.1.0/24
#       as_set: true
#       match_map: match01
#     - address: 5.2.1.0/24
#       advertise_only: true
#       attribute_map: attrmatch01
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     distance:
#       external: 50
#       internal: 50
#       local: 50
#     maximum_paths:
#       max_equal_cost_paths: 55
#     neighbor:
#     - fall_over: true
#       link_bandwidth:
#         set: true
#         update_delay: 5
#       maximum_received_routes:
#         count: 12000
#       monitoring: true
#       neighbor_address: peer1
#       peer_group: peer1
#       send_community:
#         community_attribute: extended
#         link_bandwidth_attribute: aggregate
#         speed: '600'
#         sub_attribute: link-bandwidth
#     - allowas_in:
#         count: 3
#       default_originate:
#         always: true
#       dont_capability_negotiate: true
#       export_localpref: 4000
#       maximum_received_routes:
#         count: 500
#         warning_limit:
#           limit_percent: 5
#       neighbor_address: 10.1.3.2
#       next_hop_unchanged: true
#     redistribute:
#     - protocol: static
#       route_map: map_static
#     - protocol: attached-host
#     vlan: 5
#     vrfs:
#     - neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         maximum_received_routes:
#           count: 12000
#         neighbor_address: 12.1.3.2
#       route_target:
#         action: import
#         target: '54:11'
#       vrf: vrf01

# Using gathered

# existing config
# veos(config)#show running-config | section bgp
# router bgp 100
#    bgp convergence slow-peer time 6
#    distance bgp 50 50 50
#    maximum-paths 55
#    bgp additional-paths send any
#    neighbor peer1 peer group
#    neighbor peer1 link-bandwidth update-delay 5
#    neighbor peer1 fall-over bfd
#    neighbor peer1 monitoring
#    neighbor peer1 send-community extended link-bandwidth aggregate 600
#    neighbor peer1 maximum-routes 12000
#    neighbor 10.1.3.2 export-localpref 4000
#    neighbor 10.1.3.2 next-hop-unchanged
#    neighbor 10.1.3.2 dont-capability-negotiate
#    neighbor 10.1.3.2 allowas-in 3
#    neighbor 10.1.3.2 default-originate always
#    neighbor 10.1.3.2 maximum-routes 500 warning-limit 5 percent
#    aggregate-address 1.2.1.0/24 as-set match-map match01
#    aggregate-address 5.2.1.0/24 attribute-map attrmatch01 advertise-only
#    redistribute static route-map map_static
#    redistribute attached-host
#    !
#    vlan 5
#    !
#    address-family ipv4
#       neighbor 10.1.3.2 prefix-list prefix01 out
#    !
#    vrf vrf01
#       route-target import 54:11
#       neighbor 12.1.3.2 dont-capability-negotiate
#       neighbor 12.1.3.2 allowas-in 3
#       neighbor 12.1.3.2 default-originate always
#       neighbor 12.1.3.2 maximum-routes 12000

- name: Gather BGP facts using gathered
  arista.eos.eos_bgp_global:
    state: gathered

# Task output:
# ------------
# gathered:
#     aggregate_address:
#     - address: 1.2.1.0/24
#       as_set: true
#       match_map: match01
#     - address: 5.2.1.0/24
#       advertise_only: true
#       attribute_map: attrmatch01
#     as_number: '100'
#     bgp_params:
#       additional_paths: send
#       convergence:
#         slow_peer: true
#         time: 6
#     distance:
#       external: 50
#       internal: 50
#       local: 50
#     maximum_paths:
#       max_equal_cost_paths: 55
#     neighbor:
#     - fall_over: true
#       link_bandwidth:
#         set: true
#         update_delay: 5
#       maximum_received_routes:
#         count: 12000
#       monitoring: true
#       neighbor_address: peer1
#       peer_group: peer1
#       send_community:
#         community_attribute: extended
#         link_bandwidth_attribute: aggregate
#         speed: '600'
#         sub_attribute: link-bandwidth
#     - allowas_in:
#         count: 3
#       default_originate:
#         always: true
#       dont_capability_negotiate: true
#       export_localpref: 4000
#       maximum_received_routes:
#         count: 500
#         warning_limit:
#           limit_percent: 5
#       neighbor_address: 10.1.3.2
#       next_hop_unchanged: true
#     redistribute:
#     - protocol: static
#       route_map: map_static
#     - protocol: attached-host
#     vlan: 5
#     vrfs:
#     - neighbor:
#       - allowas_in:
#           count: 3
#         default_originate:
#           always: true
#         dont_capability_negotiate: true
#         maximum_received_routes:
#           count: 12000
#         neighbor_address: 12.1.3.2
#       route_target:
#         action: import
#         target: '54:11'
#       vrf: vrf01

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
before dictionary	The configuration prior to the model invocation. Returned: always Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: ["router bgp 100", "neighbor 10.1.3.2 allowas-in", "neighbor 10.1.3.2 default-originate always", "neighbor 10.1.3.2 dont-capability-negotiate"]
gathered dictionary	Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: "This output will always be in the same format as the module argspec.\n"
parsed dictionary	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: "This output will always be in the same format as the module argspec.\n"
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: ["router bgp 100", "neighbor 10.1.3.2 allowas-in", "neighbor 10.1.3.2 default-originate always", "neighbor 10.1.3.2 dont-capability-negotiate"]

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)

Collection links

• Issue Tracker
• Repository (Sources)