arista.eos.eos_eapi module – Manage and configure Arista EOS eAPI.

Note

This module is part of the arista.eos collection (version 10.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: arista.eos.eos_eapi.

New in arista.eos 1.0.0

Synopsis

• Use to enable or disable eAPI access, and set the port and state of http, https, local_http and unix-socket servers.

• When enabling eAPI access the default is to enable HTTP on port 80, enable HTTPS on port 443, disable local HTTP, and disable Unix socket server. Use the options listed below to override the default configuration.

• Requires EOS v4.12 or greater.

Requirements

The below requirements are needed on the host that executes this module.

• EOS v4.12 or greater

Parameters

Parameter	Comments
config string	The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The config argument allows the implementer to pass in the configuration to use as the base config for comparison.
http aliases: enable_http boolean	The http argument controls the operating state of the HTTP transport protocol when eAPI is present in the running-config. When the value is set to True, the HTTP protocol is enabled and when the value is set to False, the HTTP protocol is disabled. By default, when eAPI is first configured, the HTTP protocol is disabled. Choices: false true
http_port integer	Configures the HTTP port that will listen for connections when the HTTP transport protocol is enabled. This argument accepts integer values in the valid range of 1 to 65535.
https aliases: enable_https boolean	The https argument controls the operating state of the HTTPS transport protocol when eAPI is present in the running-config. When the value is set to True, the HTTPS protocol is enabled and when the value is set to False, the HTTPS protocol is disabled. By default, when eAPI is first configured, the HTTPS protocol is enabled. Choices: false true
https_port integer	Configures the HTTP port that will listen for connections when the HTTP transport protocol is enabled. This argument accepts integer values in the valid range of 1 to 65535.
local_http aliases: enable_local_http boolean	The local_http argument controls the operating state of the local HTTP transport protocol when eAPI is present in the running-config. When the value is set to True, the HTTP protocol is enabled and restricted to connections from localhost only. When the value is set to False, the HTTP local protocol is disabled. Note is value is independent of the http argument Choices: false true
local_http_port integer	Configures the HTTP port that will listen for connections when the HTTP transport protocol is enabled. This argument accepts integer values in the valid range of 1 to 65535.
socket aliases: enable_socket boolean	The socket argument controls the operating state of the UNIX Domain Socket used to receive eAPI requests. When the value of this argument is set to True, the UDS will listen for eAPI requests. When the value is set to False, the UDS will not be available to handle requests. By default when eAPI is first configured, the UDS is disabled. Choices: false true
state string	The state argument controls the operational state of eAPI on the remote device. When this argument is set to started, eAPI is enabled to receive requests and when this argument is stopped, eAPI is disabled and will not receive requests. Choices: "started" ← (default) "stopped"
timeout integer	The time (in seconds) to wait for the eAPI configuration to be reflected in the running-config. Default: 30
vrf string	The vrf argument will configure eAPI to listen for connections in the specified VRF. By default, eAPI transports will listen for connections in the global table. This value requires the VRF to already be created otherwise the task will fail. Default: "default"

Examples

- name: Enable eAPI access with default configuration
  arista.eos.eos_eapi:
    state: started

- name: Enable eAPI with no HTTP, HTTPS at port 9443, local HTTP at port 80, and socket
    enabled
  arista.eos.eos_eapi:
    state: started
    http: false
    https_port: 9443
    local_http: true
    local_http_port: 80
    socket: true

- name: Shutdown eAPI access
  arista.eos.eos_eapi:
    state: stopped

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
commands list / elements=string	The list of configuration mode commands to send to the device Returned: always Sample: ["management api http-commands", "protocol http port 81", "no protocol https"]
session_name string	The EOS config session name used to load the configuration Returned: when changed is True Sample: "ansible_1479315771"
urls dictionary	Hash of URL endpoints eAPI is listening on per interface Returned: when eAPI is started Sample: {"Management1": ["http://172.26.10.1:80"]}

Authors

• Peter Sprygada (@privateip)

Collection links

• Issue Tracker
• Repository (Sources)