arista.eos.eos_logging_global module – Manages logging resource module

Note

This module is part of the arista.eos collection (version 10.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_logging_global.

New in arista.eos 3.0.0

Synopsis 

This module configures and manages the attributes of logging on Arista EOS platforms.

Parameters 

Parameter	Comments
config dictionary	A dictionary of logging options
buffered dictionary	Set buffered logging parameters.
buffer_size integer	Logging buffer size
severity string	Severity level . Choices: `"emergencies"` `"alerts"` `"critical"` `"errors"` `"warnings"` `"notifications"` `"informational"` `"debugging"`
console dictionary	Set console logging parameters.
severity string	Severity level . Choices: `"emergencies"` `"alerts"` `"critical"` `"errors"` `"warnings"` `"notifications"` `"informational"` `"debugging"`
event string	Global events Choices: `"link-status"` `"port-channel"` `"spanning-tree"`
facility string	Set logging facility. Choices: `"auth"` `"cron"` `"daemon"` `"kern"` `"local0"` `"local1"` `"local2"` `"local3"` `"local4"` `"local5"` `"local6"` `"local7"` `"lpr"` `"mail"` `"news"` `"sys10"` `"sys11"` `"sys12"` `"sys13"` `"sys14"` `"sys9"` `"syslog"` `"user"` `"uucp"`
format dictionary	Set logging format parameters
hostname string	Specify hostname logging format.
sequence_numbers boolean	No. of log messages. Choices: `false` `true`
timestamp dictionary	Set timestamp logging parameters.
high_resolution boolean	RFC3339 timestamps. Choices: `false` `true`
traditional dictionary	Traditional syslog timestamp format as specified in RFC3164.
state string	When enabled traditional timestamp format is set. Choices: `"enabled"` `"disabled"`
timezone boolean	Show timezone in traditional format timestamp Choices: `false` `true`
year boolean	Show year in traditional format timestamp Choices: `false` `true`
hosts list / elements=dictionary	Set syslog server IP address and parameters.
add boolean	Configure ports on the given host. Choices: `false` `true`
name string	Hostname or IP address of the syslog server.
port integer	Port of the syslog server.
protocol string	Set syslog server transport protocol Choices: `"tcp"` `"udp"`
remove boolean	Remove configured ports from the given host Choices: `false` `true`
level dictionary	Configure logging severity
facility string	Facility level
severity string	Severity level . Choices: `"emergencies"` `"alerts"` `"critical"` `"errors"` `"warnings"` `"notifications"` `"informational"` `"debugging"`
monitor string	Set terminal monitor severity
persistent dictionary	Save logging messages to the flash disk.
set boolean	Save logging messages to the flash dis. Choices: `false` `true`
size integer	The maximum size (in bytes) of logging file stored on flash disk.
policy dictionary	Configure logging policies.
invert_result boolean	Invert the match of match-list. Choices: `false` `true`
match_list string	Configure logging message filtering.
qos integer	Set DSCP value in IP header.
relogging_interval integer	Configure relogging-interval for critical log messages
repeat_messages boolean	Repeat messages instead of summarizing number of repeats Choices: `false` `true`
source_interface string	Use IP Address of interface as source IP of log messages.
synchronous dictionary	Set synchronizing unsolicited with solicited messages
level string	Configure logging severity
set boolean	Set synchronizing unsolicited with solicited messages. Choices: `false` `true`
trap dictionary	Severity of messages sent to the syslog server.
set boolean	Severity of messages sent to the syslog server. Choices: `false` `true`
severity string	Severity level . Choices: `"emergencies"` `"alerts"` `"critical"` `"errors"` `"warnings"` `"notifications"` `"informational"` `"debugging"`
turn_on boolean	Turn on logging. Choices: `false` `true`
vrfs list / elements=dictionary	Specify vrf
hosts list / elements=dictionary	Set syslog server IP address and parameters.
add boolean	Configure ports on the given host. Choices: `false` `true`
name string	Hostname or IP address of the syslog server.
port integer	Port of the syslog server.
protocol string	Set syslog server transport protocol Choices: `"tcp"` `"udp"`
remove boolean	Remove configured ports from the given host Choices: `false` `true`
name string	vrf name.
source_interface string	Use IP Address of interface as source IP of log messages.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config \| section access-list. The states replaced and overridden have identical behaviour for this module. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: `"deleted"` `"merged"` ← (default) `"overridden"` `"replaced"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

Tested against Arista EOS 4.24.6M
This module works with connection network_cli. See the EOS Platform Options.

Examples 

# Using merged
# Before state

# test(config)#show running-config | section logging
# test(config)#

- name: Merge provided configuration with device configuration
  arista.eos.eos_logging_global:
    config:
      hosts:
        - name: "host01"
          protocol: "tcp"
        - name: "11.11.11.1"
          port: 25
      vrfs:
        - name: "vrf01"
          source_interface: "Ethernet1"
        - name: "vrf02"
          hosts:
            - name: "hostvrf1"
              protocol: "tcp"
            - name: "24.1.1.1"
              port: "33"

# After State:

# test(config)#show running-config | section logging
# logging host 11.11.11.1 25
# logging host host01 514 protocol tcp
# logging vrf vrf02 host 24.1.1.1 33
# logging vrf vrf02 host hostvrf1 514 protocol tcp
# logging vrf vrf01 source-interface Ethernet1
# test(config)#
#
#
# Module Execution:
# "after": {
#         "hosts": [
#             {
#                 "name": "11.11.11.1",
#                 "port": 25
#             },
#             {
#                 "name": "host01",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "vrfs": [
#             {
#                 "name": "vrf01",
#                 "source_interface": "Ethernet1"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "24.1.1.1",
#                         "port": 33
#                     },
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf02"
#             }
#         ]
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "logging host host01 protocol tcp",
#         "logging host 11.11.11.1 25",
#         "logging vrf vrf01 source-interface Ethernet1",
#         "logging vrf vrf02 host hostvrf1 protocol tcp",
#         "logging vrf vrf02 host 24.1.1.1 33"
#     ],
#

# Using replaced:
# Before State:

# test(config)#show running-config | section logging
# logging host 11.11.11.1 25
# logging host host01 514 protocol tcp
# logging vrf vrf02 host 24.1.1.1 33
# logging vrf vrf02 host hostvrf1 514 protocol tcp
# logging format timestamp traditional timezone
# logging vrf vrf01 source-interface Ethernet1
# logging policy match inverse-result match-list                           list01 discard
# logging persistent 4096
# !
# logging level AAA alerts
# test(config)#

- name: Repalce
  arista.eos.eos_logging_global:
    config:
      synchronous:
        set: true
      trap:
        severity: "critical"
      hosts:
        - name: "host02"
          protocol: "tcp"
      vrfs:
        - name: "vrf03"
          source_interface: "Vlan100"
        - name: "vrf04"
          hosts:
            - name: "hostvrf1"
              protocol: "tcp"

    state: replaced

# After State:
# test(config)#show running-config | section logging
# logging synchronous
# logging trap critical
# logging host host02 514 protocol tcp
# logging vrf vrf04 host hostvrf1 514 protocol tcp
# logging vrf vrf03 source-interface Vlan100
# test(config)#
#
# Module Execution:
# "after": {
#         "hosts": [
#             {
#                 "name": "host02",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "synchronous": {
#             "set": true
#         },
#         "trap": {
#            "severity": "critical"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf03",
#                 "source_interface": "Vlan100"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf04"
#             }
#         ]
#     },
#     "before": {
#         "format": {
#             "timestamp": {
#                 "traditional": {
#                     "timezone": true
#                 }
#             }
#         },
#         "hosts": [
#             {
#                 "name": "11.11.11.1",
#                 "port": 25
#             },
#             {
#                 "name": "host01",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "level": {
#             "facility": "AAA",
#             "severity": "alerts"
#         },
#         "persistent": {
#             "size": 4096
#         },
#         "policy": {
#             "invert_result": true,
#             "match_list": "list01"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf01",
#                 "source_interface": "Ethernet1"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "24.1.1.1",
#                         "port": 33
#                     },
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf02"
#             }
#         ]
#     },
#     "changed": true,
#     "commands": [
#         "logging host host02 protocol tcp",
#         "no logging host 11.11.11.1 25",
#         "no logging host host01 514 protocol tcp",
#         "logging vrf vrf03 source-interface Vlan100",
#         "logging vrf vrf04 host hostvrf1 protocol tcp",
#         "no logging vrf vrf01 source-interface Ethernet1",
#         "no logging vrf vrf02 host 24.1.1.1 33",
#         "no logging vrf vrf02 host hostvrf1 514 protocol tcp",
#         "no logging format timestamp traditional timezone",
#         "no logging level AAA alerts",
#         "no logging persistent 4096",
#         "no logging policy match invert-result match-list list01 discard",
#         "logging synchronous",
#         "logging trap critical"
#     ],
#
#


# Using overridden:
# Before State:

# test(config)#show running-config | section logging
# logging host 11.11.11.1 25
# logging host host01 514 protocol tcp
# logging vrf vrf02 host 24.1.1.1 33
# logging vrf vrf02 host hostvrf1 514 protocol tcp
# logging format timestamp traditional timezone
# logging vrf vrf01 source-interface Ethernet1
# logging policy match inverse-result match-list                           list01 discard
# logging persistent 4096
# !
# logging level AAA alerts
# test(config)#

- name: Repalce
  arista.eos.eos_logging_global:
    config:
      synchronous:
        set: true
      trap:
        severity: "critical"
      hosts:
        - name: "host02"
          protocol: "tcp"
      vrfs:
        - name: "vrf03"
          source_interface: "Vlan100"
        - name: "vrf04"
          hosts:
            - name: "hostvrf1"
              protocol: "tcp"

    state: overridden

# After State:
# test(config)#show running-config | section logging
# logging synchronous
# logging trap critical
# logging host host02 514 protocol tcp
# logging vrf vrf04 host hostvrf1 514 protocol tcp
# logging vrf vrf03 source-interface Vlan100
# test(config)#
#
# Module Execution:
# "after": {
#         "hosts": [
#             {
#                 "name": "host02",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "synchronous": {
#             "set": true
#         },
#         "trap": {
#            "severity": "critical"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf03",
#                 "source_interface": "Vlan100"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf04"
#             }
#         ]
#     },
#     "before": {
#         "format": {
#             "timestamp": {
#                 "traditional": {
#                     "timezone": true
#                 }
#             }
#         },
#         "hosts": [
#             {
#                 "name": "11.11.11.1",
#                 "port": 25
#             },
#             {
#                 "name": "host01",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "level": {
#             "facility": "AAA",
#             "severity": "alerts"
#         },
#         "persistent": {
#             "size": 4096
#         },
#         "policy": {
#             "invert_result": true,
#             "match_list": "list01"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf01",
#                 "source_interface": "Ethernet1"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "24.1.1.1",
#                         "port": 33
#                     },
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf02"
#             }
#         ]
#     },
#     "changed": true,
#     "commands": [
#         "logging host host02 protocol tcp",
#         "no logging host 11.11.11.1 25",
#         "no logging host host01 514 protocol tcp",
#         "logging vrf vrf03 source-interface Vlan100",
#         "logging vrf vrf04 host hostvrf1 protocol tcp",
#         "no logging vrf vrf01 source-interface Ethernet1",
#         "no logging vrf vrf02 host 24.1.1.1 33",
#         "no logging vrf vrf02 host hostvrf1 514 protocol tcp",
#         "no logging format timestamp traditional timezone",
#         "no logging level AAA alerts",
#         "no logging persistent 4096",
#         "no logging policy match invert-result match-list list01 discard",
#         "logging synchronous",
#         "logging trap critical"
#     ],
#
#

# Using deleted:

# Before State:
# test(config)#show running-config | section logging
# logging synchronous level critical
# logging host 11.11.11.1 25
# logging host host01 514 protocol tcp
# logging host host02 514 protocol tcp
# logging vrf vrf02 host 24.1.1.1 33
# logging vrf vrf02 host hostvrf1 514 protocol tcp
# logging vrf vrf04 host hostvrf1 514 protocol tcp
# logging vrf vrf01 source-interface Ethernet1
# logging vrf vrf03 source-interface Vlan100
# test(config)#

- name: Delete all logging configs
  arista.eos.eos_logging_global:
    state: deleted
  become: true

# After state:
# test(config)#show running-config | section logging
# test(config)#
#
# "after": {},
#     "before": {
#         "hosts": [
#             {
#                 "name": "11.11.11.1",
#                 "port": 25
#             },
#             {
#                 "name": "host01",
#                 "port": 514,
#                 "protocol": "tcp"
#             },
#             {
#                 "name": "host02",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "synchronous": {
#             "level": "critical"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf01",
#                 "source_interface": "Ethernet1"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "24.1.1.1",
#                         "port": 33
#                     },
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf02"
#             },
#             {
#                 "name": "vrf03",
#                 "source_interface": "Vlan100"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf04"
#             }
#         ]
#     },
#     "changed": true,
#     "commands": [
#         "no logging host 11.11.11.1 25",
#         "no logging host host01 514 protocol tcp",
#         "no logging host host02 514 protocol tcp",
#         "no logging vrf vrf01 source-interface Ethernet1",
#         "no logging vrf vrf02 host 24.1.1.1 33",
#         "no logging vrf vrf02 host hostvrf1 514 protocol tcp",
#         "no logging vrf vrf03 source-interface Vlan100",
#         "no logging vrf vrf04 host hostvrf1 514 protocol tcp",
#         "no logging synchronous level critical"
#     ],

# Using parsed:
# parsed.cfg

# logging host 11.11.11.1 25
# logging host host01 514 protocol tcp
# logging vrf vrf02 host 24.1.1.1 33
# logging vrf vrf02 host hostvrf1 514 protocol tcp
# logging format timestamp traditional timezone
# logging vrf vrf01 source-interface Ethernet1
# logging policy match inverse-result match-list                           list01 discard
# logging persistent 4096
# !
# logging level AAA alerts

- name: parse configs
  arista.eos.eos_logging_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Module Execution
# "parsed": {
#         "format": {
#             "timestamp": {
#                 "traditional": {
#                     "timezone": true
#                 }
#             }
#         },
#         "hosts": [
#             {
#                 "name": "11.11.11.1",
#                 "port": 25
#             },
#             {
#                 "name": "host01",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "level": {
#             "facility": "AAA",
#             "severity": "alerts"
#         },
#         "persistent": {
#             "size": 4096
#         },
#         "policy": {
#             "invert_result": true,
#             "match_list": "list01"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf01",
#                 "source_interface": "Ethernet1"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "24.1.1.1",
#                         "port": 33
#                     },
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf02"
#             }
#         ]
#     }
#

# Using gathered:
# Before State:
# test(config)#show running-config | section logging
# logging host 11.11.11.1 25
# logging host host01 514 protocol tcp
# logging vrf vrf02 host 24.1.1.1 33
# logging vrf vrf02 host hostvrf1 514 protocol tcp
# logging format timestamp traditional timezone
# logging vrf vrf01 source-interface Ethernet1
# logging policy match inverse-result match-list                           list01 discard
# logging persistent 4096
# !
# logging level AAA alerts
# test(config)#

- name: gather configs
  arista.eos.eos_logging_global:
    state: gathered

# Module Execution:
# "gathered": {
#         "format": {
#             "timestamp": {
#                 "traditional": {
#                     "timezone": true
#                 }
#             }
#         },
#         "hosts": [
#             {
#                 "name": "11.11.11.1",
#                 "port": 25
#             },
#             {
#                 "name": "host01",
#                 "port": 514,
#                 "protocol": "tcp"
#             }
#         ],
#         "level": {
#             "facility": "AAA",
#             "severity": "alerts"
#         },
#         "persistent": {
#             "size": 4096
#         },
#         "policy": {
#             "invert_result": true,
#             "match_list": "list01"
#         },
#         "vrfs": [
#             {
#                 "name": "vrf01",
#                 "source_interface": "Ethernet1"
#             },
#             {
#                 "hosts": [
#                     {
#                         "name": "24.1.1.1",
#                         "port": 33
#                     },
#                     {
#                         "name": "hostvrf1",
#                         "port": 514,
#                         "protocol": "tcp"
#                     }
#                 ],
#                 "name": "vrf02"
#             }
#         ]
#     },
#

# Using rendered:
- name: Render provided configuration
  arista.eos.eos_logging_global:
    config:
      format:
        timestamp:
          traditional:
            timezone: true
      level:
        facility: "AAA"
        severity: "alerts"
      persistent:
        size: 4096
      policy:
        invert_result: true
        match_list: "list01"
      hosts:
        - name: "host01"
          protocol: "tcp"
        - name: "11.11.11.1"
          port: 25
      vrfs:
        - name: "vrf01"
          source_interface: "Ethernet1"
        - name: "vrf02"
          hosts:
            - name: "hostvrf1"
              protocol: "tcp"
            - name: "24.1.1.1"
              port: "33"
# Module Execution:

# "rendered": [
#         "logging host host01 protocol tcp",
#         "logging host 11.11.11.1 25",
#         "logging vrf vrf01 source-interface Ethernet1",
#         "logging vrf vrf02 host hostvrf1 protocol tcp",
#         "logging vrf vrf02 host 24.1.1.1 33",
#         "logging format timestamp traditional timezone",
#         "logging level AAA alerts",
#         "logging persistent 4096",
#         "logging policy match invert-result match-list list01 discard"
#     ]
#

Authors

Gomathi Selvi Srinivasan (@GomathiselviS)

arista.eos.eos_logging_global module – Manages logging resource module

Synopsis

Parameters

Notes

Examples

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 