arista.eos.eos_ospfv3 module – OSPFv3 resource module

Note

This module is part of the arista.eos collection (version 10.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ospfv3.

New in arista.eos 1.1.0

Synopsis

• This module configures and manages the attributes of ospfv3 on Arista EOS platforms.

Parameters

Parameter	Comments
config dictionary	A list of configurations for ospfv3.
processes list / elements=dictionary	A list of dictionary specifying the ospfv3 processes.
address_family list / elements=dictionary	Enable address family and enter its config mode
adjacency dictionary	Configure adjacency options for OSPF instance.
exchange_start dictionary	Configure exchange-start options for OSPF instance.
threshold integer	Number of peers to bring up simultaneously.
afi string	address family . Choices: "ipv4" "ipv6"
areas list / elements=dictionary	Specifies the configuration for OSPF areas
area_id string	Specifies a 32 bit number expressed in decimal or dotted-decimal notation.
authentication dictionary	Configure authentication for the area incase of ospfv3.
algorithm string	Name of algorithm to be used. Choices: "md5" "sha1"
encrypt_key boolean	If false, key string is not encrypted Choices: false true
hidden_key boolean	If true, Specifies that a HIDDEN key will follow. Choices: false true
key string	128 bit MD5 key or 140 bit SHA1 key.
passphrase string	Passphrase String for deriving keys for authentication and encryption.
spi integer	Specify the SPI value
default_cost integer	Specify the cost for default summary route in stub/NSSA area.
encryption dictionary	Configure encryption for the area
algorithm string	name of the algorithm to be used. Choices: "sha1" "md5"
encrypt_key boolean	If false, key string is not encrypted Choices: false true
encryption string	name of encryption to be used. Choices: "3des-cbc" "aes-128-cbc" "aes-192-cbc" "aes-256-cbc" "null"
hidden_key boolean	If true, Specifies that a HIDDEN key will follow. Choices: false true
key string	128 bit MD5 key or 140 bit SHA1 key.
passphrase string	Passphrase String for deriving keys for authentication and encryption.
spi integer	Specify the SPI value
nssa dictionary	Configures NSSA parameters.
default_information_originate dictionary	Originate default Type 7 LSA.
metric integer	Metric for default route.
metric_type integer	Metric type for default route.
nssa_only boolean	Limit default advertisement to this NSSA area. Choices: false true
set boolean	true if only default information orignate is set Choices: false true
no_summary boolean	Filter all type-3 LSAs in the nssa area. Choices: false true
nssa_only boolean	Disable Type-7 LSA p-bit setting Choices: false true
set boolean	true if only nssa is set Choices: false true
translate boolean	Enable LSA translation. Choices: false true
ranges list / elements=dictionary	Configure route summarization.
address string	IP address.
advertise boolean	Enable Advertisement of the range. Choices: false true
cost integer	Configures the metric.
subnet_address string	IP address with mask length
subnet_mask string	IP subnet mask
stub dictionary	Stub area.
set boolean	true if only stub is set Choices: false true
summary_lsa boolean	If false , Filter all type-3 LSAs in the stub area. Choices: false true
auto_cost dictionary	Set auto-cost.
reference_bandwidth integer	reference bandwidth in megabits per sec.
bfd dictionary	Enable BFD.
all_interfaces boolean	Enable BFD on all interfaces. Choices: false true
default_information dictionary	Control distribution of default information.
always boolean	Always advertise default route. Choices: false true
metric integer	Metric for default route.
metric_type integer	Metric type for default route.
originate boolean	Distribute a default route. Choices: false true
route_map string	Specify which route-map to use.
default_metric integer	Configure the default metric for redistributed routes.
distance integer	Specifies the administrative distance for routes.
fips_restrictions boolean	Use FIPS compliant algorithms Choices: false true
graceful_restart dictionary	Enable graceful restart mode.
grace_period integer	Specify maximum time to wait for graceful-restart to complete.
set boolean	When true sets the grace_fulrestart config alone. Choices: false true
graceful_restart_helper boolean	If true, Enable graceful restart helper. Choices: false true
log_adjacency_changes dictionary	To configure link-state changes and transitions of OSPFv3 neighbors.
detail boolean	If true , configures the switch to log all link-state changes. Choices: false true
set boolean	When true sets the log_adjacency_changes config alone. Choices: false true
max_metric dictionary	Set maximum metric.
router_lsa dictionary	Maximum metric in self-originated router-LSAs.
external_lsa dictionary	Override external-lsa metric with max-metric value.
max_metric_value integer	Set max metric value for external LSAs.
set boolean	Set external-lsa attribute. Choices: false true
include_stub boolean	Set maximum metric for stub links in router-LSAs. Choices: false true
on_startup dictionary	Set maximum metric temporarily after reboot.
wait_for_bgp boolean	Let BGP decide when to originate router-LSA with normal metric Choices: false true
wait_period integer	Wait period in seconds after startup.
set boolean	Set router-lsa attribute. Choices: false true
summary_lsa dictionary	Override summary-lsa metric with max-metric value.
max_metric_value integer	Set max metric value for external LSAs.
set boolean	Set external-lsa attribute. Choices: false true
maximum_paths integer	Maximum number of next-hops in an ECMP route.
passive_interface boolean	Include interface but without actively running OSPF. Choices: false true
redistribute list / elements=dictionary	Specifies the routes to be redistributed.
route_map string	Specify which route map to use.
routes string	Route types (BGP,static,connected) Choices: "bgp" "connected" "static"
router_id string	32-bit number assigned to a router running OSPFv3.
shutdown boolean	Disable the OSPF instance. Choices: false true
timers dictionary	Configure OSPF timers.
lsa any	Configure OSPFv3 LSA timers.
direction string	Configure OSPFv3 LSA receiving/transmission timers. Choices: "rx" "tx"
initial integer	Initial SPF schedule delay in msecs.
max integer	Max wait time between two SPFs in msecs.
min integer	Min Hold time between two SPFs in msecs
out_delay integer	Configure out-delay timer.
pacing integer	Configure OSPF packet pacing.
spf dictionary	Configure OSPFv3 spf timers.
initial integer	Initial SPF schedule delay in msecs.
max integer	Max wait time between two SPFs in msecs.
min integer	Min Hold time between two SPFs in msecs
adjacency dictionary	Configure adjacency options for OSPF instance.
exchange_start dictionary	Configure exchange-start options for OSPF instance.
threshold integer	Number of peers to bring up simultaneously.
areas list / elements=dictionary	Specifies the configuration for OSPF areas
area_id string	Specifies a 32 bit number expressed in decimal or dotted-decimal notation.
authentication dictionary	Configure authentication for the area incase of ospfv3.
algorithm string	Name of algorithm to be used. Choices: "md5" "sha1"
encrypt_key boolean	If false, key string is not encrypted Choices: false true
hidden_key boolean	If true, Specifies that a HIDDEN key will follow. Choices: false true
key string	128 bit MD5 key or 140 bit SHA1 key.
passphrase string	Passphrase String for deriving keys for authentication and encryption.
spi integer	Specify the SPI value
default_cost integer	Specify the cost for default summary route in stub/NSSA area.
encryption dictionary	Configure encryption for the area
algorithm string	name of the algorithm to be used. Choices: "sha1" "md5"
encrypt_key boolean	If false, key string is not encrypted Choices: false true
encryption string	name of encryption to be used. Choices: "3des-cbc" "aes-128-cbc" "aes-192-cbc" "aes-256-cbc" "null"
hidden_key boolean	If true, Specifies that a HIDDEN key will follow. Choices: false true
key string	128 bit MD5 key or 140 bit SHA1 key.
passphrase string	Passphrase String for deriving keys for authentication and encryption.
spi integer	Specify the SPI value
nssa dictionary	Configures NSSA parameters.
default_information_originate dictionary	Originate default Type 7 LSA.
metric integer	Metric for default route.
metric_type integer	Metric type for default route.
nssa_only boolean	Limit default advertisement to this NSSA area. Choices: false true
set boolean	true if only default information orignate is set Choices: false true
no_summary boolean	Filter all type-3 LSAs in the nssa area. Choices: false true
nssa_only boolean	Disable Type-7 LSA p-bit setting Choices: false true
set boolean	true if only nssa is set Choices: false true
translate boolean	Enable LSA translation. Choices: false true
stub dictionary	Stub area.
set boolean	true if only stub is set. Choices: false true
summary_lsa boolean	If false , Filter all type-3 LSAs in the stub area. Choices: false true
auto_cost dictionary	Set auto-cost.
reference_bandwidth integer	reference bandwidth in megabits per sec.
bfd dictionary	Enable BFD.
all_interfaces boolean	Enable BFD on all interfaces. Choices: false true
fips_restrictions boolean	Use FIPS compliant algorithms Choices: false true
graceful_restart dictionary	Enable graceful restart mode.
grace_period integer	Specify maximum time to wait for graceful-restart to complete.
set boolean	When true sets the grace_fulrestart config alone. Choices: false true
graceful_restart_helper boolean	If true, Enable graceful restart helper. Choices: false true
log_adjacency_changes dictionary	To configure link-state changes and transitions of OSPFv3 neighbors.
detail boolean	If true , configures the switch to log all link-state changes. Choices: false true
set boolean	When true sets the log_adjacency_changes config alone. Choices: false true
max_metric dictionary	Set maximum metric.
router_lsa dictionary	Maximum metric in self-originated router-LSAs.
external_lsa dictionary	Override external-lsa metric with max-metric value.
max_metric_value integer	Set max metric value for external LSAs.
set boolean	Set external-lsa attribute. Choices: false true
include_stub boolean	Set maximum metric for stub links in router-LSAs. Choices: false true
on_startup dictionary	Set maximum metric temporarily after reboot.
wait_for_bgp boolean	Let BGP decide when to originate router-LSA with normal metric Choices: false true
wait_period integer	Wait period in seconds after startup.
set boolean	Set router-lsa attribute. Choices: false true
summary_lsa dictionary	Override summary-lsa metric with max-metric value.
max_metric_value integer	Set max metric value for external LSAs.
set boolean	Set external-lsa attribute. Choices: false true
passive_interface boolean	Include interface but without actively running OSPF. Choices: false true
router_id string	32-bit number assigned to a router running OSPFv3.
shutdown boolean	Disable the OSPF instance. Choices: false true
timers dictionary	Configure OSPF timers.
lsa any	Configure OSPFv3 LSA timers.
direction string	Configure OSPFv3 LSA receiving/transmission timers. Choices: "rx" "tx"
initial integer	Initial SPF schedule delay in msecs.
max integer	Max wait time between two SPFs in msecs.
min integer	Min Hold time between two SPFs in msecs
out_delay integer	Configure out-delay timer.
pacing integer	Configure OSPF packet pacing.
spf dictionary	Configure OSPFv3 spf timers.
initial integer	Initial SPF schedule delay in msecs.
max integer	Max wait time between two SPFs in msecs.
min integer	Min Hold time between two SPFs in msecs
vrf string	VRF name .
running_config string	This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section ospfv3. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: "deleted" "merged" ← (default) "overridden" "replaced" "gathered" "rendered" "parsed"

Notes

Note

• Tested against Arista EOS 4.24.6F

• This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state:
# -------------
# veos#show running-config | section ospfv3
# veos#

- name: Merge the provided configuration with the existing running configuration
  arista.eos.eos_ospfv3:
    config:
      processes:
        - address_family:
            - timers:
                lsa: 22
              graceful_restart:
                grace_period: 35
              afi: "ipv6"
          timers:
            pacing: 55
          fips_restrictions: true
          router_id: "2.2.2.2"
          vrf: "vrfmerge"
    state: merged


# Task output:
# ------------
# before: {}
#
# commands:
# - router ospfv3 vrf vrfmerge
# - address-family ipv6
# - graceful-restart grace-period 35
# - timers lsa arrival 22
# - exit
# - timers pacing flood 55
# - fips restrictions
# - router-id 2.2.2.2
# - exit
#
# after:
#     processes:
#     - address_family:
#       - afi: ipv6
#         fips_restrictions: true
#         graceful_restart:
#           grace_period: 35
#       fips_restrictions: true
#       router_id: 2.2.2.2
#       timers:
#         pacing: 55
#       vrf: vrfmerge

# After state:
# ------------
# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    router-id 2.2.2.2
# test
#    fips restrictions
#    timers pacing flood 55
#    !
#    address-family ipv6
#       fips restrictions
#       timers lsa arrival 22
#       graceful-restart grace-period 35

# using replaced

# Before state:
# -------------
# veos#show running-config | section ospfv3
# router ospfv3
#    fips restrictions
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    router-id 2.2.2.2
#    fips restrictions
#    timers pacing flood 55
#    !
#    address-family ipv6
#       fips restrictions
#       timers lsa arrival 22
#       graceful-restart grace-period 35

- name: Replace a section of running config with provided config
  arista.eos.eos_ospfv3:
    config:
      processes:
        - areas:
            - area_id: "0.0.0.0"
              encryption:
                spi: 43
                encryption: "null"
                algorithm: "md5"
                encrypt_key: false
                passphrase: "7hl8FV3lZ6H1mAKpjL47hQ=="
          vrf: "default"
          address_family:
            - afi: "ipv4"
              router_id: "7.1.1.1"
    state: replaced

# Task output:
# ------------
# before:
#     processes:
#     - areas:
#       - area_id: 0.0.0.0
#         encryption:
#           algorithm: md5
#           encryption: 'null'
#           hidden_key: true
#           passphrase: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
#           spi: 43
#       fips_restrictions: true
#       vrf: default
#     - address_family:
#       - afi: ipv6
#         fips_restrictions: true
#         graceful_restart:
#           grace_period: 35
#       fips_restrictions: true
#       router_id: 2.2.2.2
#       timers:
#         pacing: 55
#       vrf: vrfmerge
#
# commands:
# - router ospfv3 vrf vrfmerge
# - address-family ipv6
# - no fips restrictions
# - no graceful-restart
# - no timers lsa arrival 22
# - area 0.0.0.3 range 10.1.2.2/24 advertise
# - area 0.0.0.3 range 60.1.1.1 255.255.0.0 cost 30
# - exit
# - passive-interface default
# - no router-id
# - no fips restrictions
# - no timers pacing flood 55
# - exit
#
# after:
#     processes:
#     - areas:
#       - area_id: 0.0.0.0
#         encryption:
#           algorithm: md5
#           encryption: 'null'
#           hidden_key: true
#           passphrase: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
#           spi: 43
#       vrf: default
#     - address_family:
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#       passive_interface: true
#       vrf: vrfmerge

# After state:
# ------------
# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30

# using overridden

# Before state:
# -------------
# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30

- name: Override running config with provided config
  arista.eos.eos_ospfv3:
    config:
      processes:
        - address_family:
            - areas:
                - area_id: "0.0.0.3"
                  ranges:
                    - address: 10.1.2.2/24
                      advertise: true
                    - address: 60.1.1.1
                      subnet_mask: 255.255.0.0
                      cost: 30
              afi: "ipv6"
          passive_interface: true
          vrf: "vrfmerge"
    state: overridden

# Task output:
# ------------
# before:
#     processes:
#     - areas:
#       - area_id: 0.0.0.0
#         encryption:
#           algorithm: md5
#           encryption: 'null'
#           hidden_key: true
#           passphrase: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
#           spi: 43
#       vrf: default
#     - address_family:
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#       passive_interface: true
#       vrf: vrfmerge
#
# commands:
# - no router ospfv3
# - router ospfv3 vrf vrfmerge
# - address-family ipv6
# - no area 0.0.0.3 range 10.1.2.0/24
# - no area 0.0.0.3 range 60.1.0.0/16 cost 30
# - area 0.0.0.3 range 10.1.2.2/24 advertise
# - area 0.0.0.3 range 60.1.1.1 255.255.0.0 cost 30
# - exit
# - exit
#
# after:
#     processes:
#     - address_family:
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#       passive_interface: true
#       vrf: vrfmerge

# After state:
# ------------
# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30

# using deleted

# Before state:
# -------------
# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30

- name: Delete OSPFv3 config
  arista.eos.eos_ospfv3:
    config:
    state: deleted

# Task output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: 0.0.0.0
#         encryption:
#           algorithm: md5
#           encryption: 'null'
#           hidden_key: true
#           passphrase: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
#           spi: 43
#       vrf: default
#     - address_family:
#       - afi: ipv4
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#         redistribute:
#         - routes: connected
#         - route_map: MAP01
#           routes: static
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#       passive_interface: true
#       vrf: vrfmerge
#
# commands:
#
# - no router ospfv3
#
# after: {}

# After state:
# ------------
# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30

# using parsed

# parsed_ospfv3.cfg
# router ospfv3
#    fips restrictions
#    area 0.0.0.20 stub
#    area 0.0.0.20 authentication ipsec spi 33 sha1 passphrase 7 4O8T3zo4xBdRWXBnsnK934o9SEb+jEhHUN6+xzZgCo2j9EnQBUvtwNxxLEmYmm6w
#    area 0.0.0.40 default-cost 45
#    area 0.0.0.40 stub
#    timers pacing flood 7
#    adjacency exchange-start threshold 11
#    !
#    address-family ipv4
#       fips restrictions
#       redistribute connected
#    !
#    address-family ipv6
#       router-id 10.1.1.1
#       fips restrictions
# !
# router ospfv3 vrf vrf01
#    bfd all-interfaces
#    fips restrictions
#    area 0.0.0.0 encryption ipsec spi 256 esp null sha1 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==
#    log-adjacency-changes detail
#    !
#    address-family ipv4
#       passive-interface default
#       fips restrictions
#       redistribute connected route-map MAP01
#       maximum-paths 100
#    !
#    address-family ipv6
#       fips restrictions
#       area 0.0.0.10 nssa no-summary
#       default-information originate route-map DefaultRouteFilter
#       max-metric router-lsa external-lsa 25 summary-lsa
# !
# router ospfv3 vrf vrf02
#    fips restrictions
#    !
#    address-family ipv6
#       router-id 10.17.0.3
#       distance ospf intra-area 200
#       fips restrictions
#       area 0.0.0.1 stub
#       timers spf delay initial 56 56 56
#       timers out-delay 10

- name: Parse the provided config
  arista.eos.eos_ospfv3:
    running_config: "{{ lookup('file', './parsed_ospfv3.cfg') }}"
    state: parsed

# Task output:
# ------------
# parsed:
#     processes:
#     - address_family:
#       - afi: ipv4
#         fips_restrictions: true
#         redistribute:
#         - routes: connected
#       - afi: ipv6
#         fips_restrictions: true
#         router_id: 10.1.1.1
#       adjacency:
#         exchange_start:
#           threshold: 11
#       areas:
#       - area_id: 0.0.0.20
#         authentication:
#           algorithm: sha1
#           hidden_key: true
#           passphrase: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
#           spi: 33
#         stub:
#           set: true
#       - area_id: 0.0.0.40
#         default_cost: 45
#         stub:
#           set: true
#       fips_restrictions: true
#       timers:
#         pacing: 7
#       vrf: default
#     - address_family:
#       - afi: ipv4
#         fips_restrictions: true
#         maximum_paths: 100
#         passive_interface: true
#         redistribute:
#         - route_map: MAP01
#           routes: connected
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.10
#           nssa:
#             no_summary: true
#         default_information:
#           originate: true
#           route_map: DefaultRouteFilter
#         fips_restrictions: true
#         max_metric:
#           router_lsa:
#             external_lsa:
#               max_metric_value: 25
#             summary_lsa:
#               set: true
#       areas:
#       - area_id: 0.0.0.0
#         encryption:
#           algorithm: sha1
#           encryption: 'null'
#           hidden_key: true
#           passphrase: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
#           spi: 256
#       bfd:
#         all_interfaces: true
#       fips_restrictions: true
#       log_adjacency_changes:
#         detail: true
#       vrf: vrf01
#     - address_family:
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.1
#           stub:
#             set: true
#         distance: 200
#         fips_restrictions: true
#         router_id: 10.17.0.3
#         timers:
#           out_delay: 10
#           spf:
#             initial: 56
#             max: 56
#             min: 56
#       fips_restrictions: true
#       vrf: vrf02

# using gathered

# native config:
# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30

- name: Gather running configuration
  arista.eos.eos_ospfv3:
    state: gathered

# Task output:
# ------------
# gathered:
#     processes:
#     - address_family:
#       - afi: ipv4
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#         redistribute:
#         - routes: connected
#         - route_map: MAP01
#           routes: static
#       - afi: ipv6
#         areas:
#         - area_id: 0.0.0.3
#           ranges:
#           - address: 10.1.2.0/24
#           - address: 60.1.0.0/16
#             cost: 30
#       passive_interface: true
#       vrf: vrfmerge


# using rendered

- name: render CLI commands for provided config
  arista.eos.eos_ospfv3:
    config:
      processes:
        - address_family:
            - timers:
                lsa: 22
              graceful_restart:
                grace_period: 35
              afi: "ipv6"
          timers:
            pacing: 55
          fips_restrictions: true
          router_id: "2.2.2.2"
          vrf: "vrfmerge"
    state: rendered

# Task output:
# ------------
# rendered:
# - router ospfv3 vrf vrfmerge
# - address-family ipv6
# - graceful-restart grace-period 35
# - timers lsa arrival 22
# - exit
# - timers pacing flood 55
# - fips restrictions
# - router-id 2.2.2.2
# - exit

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: "This output will always be in the same format as the module argspec.\n"
before dictionary	The configuration prior to the module execution. Returned: when state is merged, replaced, overridden, deleted or purged Sample: "This output will always be in the same format as the module argspec.\n"
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is merged, replaced, overridden, deleted or purged Sample: ["router ospfv3 vrf vrfmerge", "address-family ipv6", "graceful-restart grace-period 35"]
gathered dictionary	Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: "This output will always be in the same format as the module argspec.\n"
parsed dictionary	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: "This output will always be in the same format as the module argspec.\n"
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: ["router ospfv3 vrf vrfmerge", "address-family ipv6", "graceful-restart grace-period 35"]

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)

Collection links

• Issue Tracker
• Repository (Sources)