cisco.aci.aci_interface_policy_storm_control module – Manage Storm Control interface policies (stormctrl:IfPol)

Note

This module is part of the cisco.aci collection (version 2.10.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_interface_policy_storm_control.

Synopsis

• Manage Storm Control interface policies on Cisco ACI fabrics.

Parameters

Parameter	Comments
all_types_configuration aliases: all_types dictionary	The rates configuration for all packets type.
burst_rate string	The burst rate of all packet types.
rate string	The rate for all packet types.
rate_type string / required	The type of rate of all packet types. Choice between percentage of the bandiwth percentage or packet per second pps Choices: "percentage" "pps"
annotation string	User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead. If the value is not specified in the task and environment variable ACI_ANNOTATION then the default value will be used. Default: "orchestrator:ansible"
broadcast_configuration aliases: broadcast dictionary	The rates configuration of broadcast packets.
burst_rate string	The burst rate of broadcast packets.
rate string	The rate for broadcast packets.
rate_type string / required	The type of rate of all packet types. Choice between percentage of the bandiwth percentage or packet per second pps Choices: "percentage" "pps"
certificate_name aliases: cert_name string	The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a private_key filename was provided, this defaults to the private_key basename, without extension. If PEM-formatted content was provided for private_key, this defaults to the username value. If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.
description aliases: descr string	The description for the Storm interface policy name.
host aliases: hostname string	IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.
multicast_configuration aliases: multicast dictionary	The rates configuration of multicast packets.
burst_rate string	The burst rate of multicast packets.
rate string	The rate for multicast packets.
rate_type string / required	The type of rate of all packet types. Choice between percentage of the bandiwth percentage or packet per second pps Choices: "percentage" "pps"
name_alias string	The alias for the current object. This relates to the nameAlias field in ACI.
output_level string	Influence the output of this ACI module. normal means the standard output, incl. current dict info adds informational output, incl. previous, proposed and sent dicts debug adds debugging output, incl. filter_string, method, response, status and url information If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead. Choices: "debug" "info" "normal" ← (default)
output_path string	Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.
owner_key string	User-defined string for the ownerKey attribute of an ACI object. This attribute represents a key for enabling clients to own their data for entity correlation. If the value is not specified in the task, the value of environment variable ACI_OWNER_KEY will be used instead.
owner_tag string	User-defined string for the ownerTag attribute of an ACI object. This attribute represents a tag for enabling clients to add their own data. For example, to indicate who created this object. If the value is not specified in the task, the value of environment variable ACI_OWNER_TAG will be used instead.
password string	The password to use for authentication. This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead. If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
port integer	Port number to be used for REST connection. The default value depends on parameter use_ssl. If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.
private_key aliases: cert_key string	Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default certificate_name that is used. This option is mutual exclusive with password. If password is provided too, it will be ignored. If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.
state string	Use present or absent for adding or removing. Use query for listing an object or multiple objects. Choices: "absent" "present" ← (default) "query"
storm_control_action string	The storm control action to take when triggered. Choices: "drop" "shutdown"
storm_control_policy aliases: storm_control, storm_control_name, name string	The Storm Control interface policy name.
storm_control_soak_action integer	The number of instances before triggering shutdown.
suppress_previous aliases: no_previous, ignore_previous boolean	If true, a GET to check previous will not be sent before a POST update to APIC. If the value is not specified in the task, the value of environment variable ACI_SUPPRESS_PREVIOUS will be used instead. The default value is false. WARNING - This causes the previous return value to be empty. The previous state of the object will not be checked and the POST update will contain all properties. Choices: false true
suppress_verification aliases: no_verification, no_verify, suppress_verify, ignore_verify, ignore_verification boolean	If true, a verifying GET will not be sent after a POST update to APIC. If the value is not specified in the task, the value of environment variable ACI_SUPPRESS_VERIFICATION will be used instead. The default value is false. WARNING - This causes the current return value to be set to the proposed value. The current object including default values will be unverifiable in a single task. Choices: false true
timeout integer	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead. The default value is 30.
unicast_configuration aliases: unicast dictionary	The rates configuration of unicast packets.
burst_rate string	The burst rate of unicast packets.
rate string	The rate for unicast packets.
rate_type string / required	The type of rate of all packet types. Choice between percentage of the bandiwth percentage or packet per second pps Choices: "percentage" "pps"
use_proxy boolean	If false, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead. The default value is true. Choices: false true
use_ssl boolean	If false, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead. The default value is true when the connection is local. Choices: false true
username aliases: user string	The username to use for authentication. If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead. The default value is admin.
validate_certs boolean	If false, SSL certificates will not be validated. This should only set to false when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead. The default value is true. Choices: false true

See Also

See also

APIC Management Information Model reference

More information about the internal APIC class stormctrl:IfPol.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Add a new Storm Control Interface Policy
  cisco.aci.aci_interface_policy_storm_control:
    host: apic
    username: admin
    password: SomeSecretPassword
    storm_control_policy: my_storm_control_policy
    description: My Storm Control Policy
    all_types_configuration:
      rate: 80
      burst_rate: 100
      rate_type: percentage
    storm_control_action: shutdown
    storm_control_soak_action: 5
    state: present
  delegate_to: localhost

- name: Query a Storm Control Interface Policy
  cisco.aci.aci_interface_policy_storm_control:
    host: apic
    username: admin
    password: SomeSecretPassword
    storm_control_policy: my_storm_control_policy
    state: query
  delegate_to: localhost

- name: Query all Storm Control Interface Policies
  cisco.aci.aci_interface_policy_storm_control:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost

- name: Delete a Storm Control Interface Policy
  cisco.aci.aci_interface_policy_storm_control:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: my_tenant
    storm_control_policy: my_storm_control_policy
    state: absent
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
current list / elements=string	The existing configuration from the APIC after the module has finished Returned: success Sample: [{"cdpIfPol": {"attributes": {"adminSt": "disabled", "annotation": "", "descr": "Ansible Created CDP Test Policy", "dn": "uni/infra/cdpIfP-Ansible_CDP_Test_Policy", "name": "Ansible_CDP_Test_Policy", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]
error dictionary	The error information as returned from the APIC Returned: failure Sample: {"code": "122", "text": "unknown managed object class foo"}
filter_string string	The filter string used for the request Returned: failure or debug Sample: "?rsp-prop-include=config-only"
method string	The HTTP method used for the request to the APIC Returned: failure or debug Sample: "POST"
previous list / elements=string	The original configuration from the APIC before the module has started Returned: info Sample: [{"fvTenant": {"attributes": {"descr": "Production", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]
proposed dictionary	The assembled configuration from the user-provided parameters Returned: info Sample: {"fvTenant": {"attributes": {"descr": "Production environment", "name": "production"}}}
raw string	The raw output returned by the APIC REST API (xml or json) Returned: parse error Sample: "<?xml version=\"1.0\" encoding=\"UTF-8\"?><imdata totalCount=\"1\"><error code=\"122\" text=\"unknown managed object class foo\"/></imdata>"
response string	The HTTP response from the APIC Returned: failure or debug Sample: "OK (30 bytes)"
sent list / elements=string	The actual/minimal configuration pushed to the APIC Returned: info Sample: {"fvTenant": {"attributes": {"descr": "Production environment"}}}
status integer	The HTTP status from the APIC Returned: failure or debug Sample: 200
url string	The HTTP url used for the request to the APIC Returned: failure or debug Sample: "https://10.11.12.13/api/mo/uni/tn-production.json"

Authors

• Eric Girard (@netgirard)

• Gaspard Micol (@gmicol)

Collection links

• Issue Tracker
• Repository (Sources)