cisco.aci.aci_l3out_interface_secondary_ip module – Manage Layer 3 Outside (L3Out) interface secondary IP addresses (l3ext:Ip)

Note

This module is part of the cisco.aci collection (version 2.10.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_l3out_interface_secondary_ip.

Synopsis

  • Manage Layer 3 Outside (L3Out) interface secondary IP addresses.

Parameters

Parameter

Comments

address

aliases: addr, ip_address

string

Secondary IP address.

annotation

string

User-defined string for annotating an object.

If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead.

If the value is not specified in the task and environment variable ACI_ANNOTATION then the default value will be used.

Default: "orchestrator:ansible"

certificate_name

aliases: cert_name

string

The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.

If a private_key filename was provided, this defaults to the private_key basename, without extension.

If PEM-formatted content was provided for private_key, this defaults to the username value.

If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.

host

aliases: hostname

string

IP Address or hostname of APIC resolvable by Ansible control host.

If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.

interface_profile

aliases: interface_profile_name, logical_interface

string

Name of the interface profile.

ipv6_dad

string

IPv6 DAD feature.

Choices:

  • "enabled"

  • "disabled"

l3out

aliases: l3out_name

string

Name of an existing L3Out.

node_id

string

Node to build the interface on for Port-channels and single ports.

Hyphen separated pair of nodes (e.g. “201-202”) for vPCs.

node_profile

aliases: node_profile_name, logical_node

string

Name of the node profile.

output_level

string

Influence the output of this ACI module.

normal means the standard output, incl. current dict

info adds informational output, incl. previous, proposed and sent dicts

debug adds debugging output, incl. filter_string, method, response, status and url information

If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead.

Choices:

  • "debug"

  • "info"

  • "normal" ← (default)

output_path

string

Path to a file that will be used to dump the ACI JSON configuration objects generated by the module.

If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.

password

string

The password to use for authentication.

This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.

If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.

path_ep

string

Path to interface

Interface Policy Group name for Port-channels and vPCs

Port number for single ports (e.g. “eth1/12”)

pod_id

string

Pod to build the interface on.

port

integer

Port number to be used for REST connection.

The default value depends on parameter use_ssl.

If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.

private_key

aliases: cert_key

string

Either a PEM-formatted private key file or the private key content used for signature-based authentication.

This value also influences the default certificate_name that is used.

This option is mutual exclusive with password. If password is provided too, it will be ignored.

If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.

side

string

Provides the side for vPC member interfaces.

Choices:

  • "A"

  • "B"

state

string

Use present or absent for adding or removing.

Use query for listing an object or multiple objects.

Choices:

  • "absent"

  • "present" ← (default)

  • "query"

suppress_previous

aliases: no_previous, ignore_previous

boolean

If true, a GET to check previous will not be sent before a POST update to APIC.

If the value is not specified in the task, the value of environment variable ACI_SUPPRESS_PREVIOUS will be used instead.

The default value is false.

WARNING - This causes the previous return value to be empty.

The previous state of the object will not be checked and the POST update will contain all properties.

Choices:

  • false

  • true

suppress_verification

aliases: no_verification, no_verify, suppress_verify, ignore_verify, ignore_verification

boolean

If true, a verifying GET will not be sent after a POST update to APIC.

If the value is not specified in the task, the value of environment variable ACI_SUPPRESS_VERIFICATION will be used instead.

The default value is false.

WARNING - This causes the current return value to be set to the proposed value.

The current object including default values will be unverifiable in a single task.

Choices:

  • false

  • true

tenant

aliases: tenant_name

string

Name of an existing tenant.

timeout

integer

The socket level timeout in seconds.

If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead.

The default value is 30.

use_proxy

boolean

If false, it will not use a proxy, even if one is defined in an environment variable on the target hosts.

If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead.

The default value is true.

Choices:

  • false

  • true

use_ssl

boolean

If false, an HTTP connection will be used instead of the default HTTPS connection.

If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead.

The default value is true when the connection is local.

Choices:

  • false

  • true

username

aliases: user

string

The username to use for authentication.

If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead.

The default value is admin.

validate_certs

boolean

If false, SSL certificates will not be validated.

This should only set to false when used on personally controlled sites using self-signed certificates.

If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead.

The default value is true.

Choices:

  • false

  • true

Notes

Note

  • This is a test

See Also

See also

aci_l3out

The official documentation on the aci_l3out module.

aci_l3out_logical_node_profile

The official documentation on the aci_l3out_logical_node_profile module.

aci_l3out_logical_interface_profile

The official documentation on the aci_l3out_logical_interface_profile module.

aci_l3out_logical_interface

The official documentation on the aci_l3out_logical_interface module.

APIC Management Information Model reference

More information about the internal APIC class l3ext:Ip

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Add a new secondary IP to a routed interface
  cisco.aci.aci_l3out_interface_secondary_ip:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: my_tenant
    l3out: my_l3out
    node_profile: my_node_profile
    interface_profile: my_interface_profile
    pod_id: 1
    node_id: 201
    path_ep: eth1/12
    address: 192.168.10.2/27
    state: present
  delegate_to: localhost

- name: Add a new secondary IP to a vPC member
  cisco.aci.aci_l3out_interface_secondary_ip:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: my_tenant
    l3out: my_l3out
    node_profile: my_node_profile
    interface_profile: my_interface_profile
    pod_id: 1
    node_id: 201-202
    path_ep: my_vpc_ipg
    side: A
    address: 192.168.10.2/27
    state: present
  delegate_to: localhost

- name: Delete a secondary IP
  cisco.aci.aci_l3out_interface_secondary_ip:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: my_tenant
    l3out: my_l3out
    node_profile: my_node_profile
    interface_profile: my_interface_profile
    pod_id: 1
    node_id: 201
    path_ep: eth1/12
    address: 192.168.10.2/27
    state: absent
  delegate_to: localhost

- name: Query a secondary IP
  cisco.aci.aci_l3out_interface_secondary_ip:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: my_tenant
    l3out: my_l3out
    node_profile: my_node_profile
    interface_profile: my_interface_profile
    pod_id: 1
    node_id: 201
    path_ep: eth1/12
    address: 192.168.10.2/27
    state: query
  delegate_to: localhost
  register: query_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

current

list / elements=string

The existing configuration from the APIC after the module has finished

Returned: success

Sample: [{"fvTenant": {"attributes": {"descr": "Production environment", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]

error

dictionary

The error information as returned from the APIC

Returned: failure

Sample: {"code": "122", "text": "unknown managed object class foo"}

filter_string

string

The filter string used for the request

Returned: failure or debug

Sample: "?rsp-prop-include=config-only"

method

string

The HTTP method used for the request to the APIC

Returned: failure or debug

Sample: "POST"

previous

list / elements=string

The original configuration from the APIC before the module has started

Returned: info

Sample: [{"fvTenant": {"attributes": {"descr": "Production", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]

proposed

dictionary

The assembled configuration from the user-provided parameters

Returned: info

Sample: {"fvTenant": {"attributes": {"descr": "Production environment", "name": "production"}}}

raw

string

The raw output returned by the APIC REST API (xml or json)

Returned: parse error

Sample: "<?xml version=\"1.0\" encoding=\"UTF-8\"?><imdata totalCount=\"1\"><error code=\"122\" text=\"unknown managed object class foo\"/></imdata>"

response

string

The HTTP response from the APIC

Returned: failure or debug

Sample: "OK (30 bytes)"

sent

list / elements=string

The actual/minimal configuration pushed to the APIC

Returned: info

Sample: {"fvTenant": {"attributes": {"descr": "Production environment"}}}

status

integer

The HTTP status from the APIC

Returned: failure or debug

Sample: 200

url

string

The HTTP url used for the request to the APIC

Returned: failure or debug

Sample: "https://10.11.12.13/api/mo/uni/tn-production.json"

Authors

  • Marcel Zehnder (@maercu)