cisco.aci.aci_vrf_multicast module – Manage VRF Multicast objects (pim:CtxP)

Note

This module is part of the cisco.aci collection (version 2.9.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_vrf_multicast.

Synopsis

• Manage VRF Multicast objects on Cisco ACI fabrics.

• Creating state=present enables Protocol Independent Multicast (PIM) on a VRF

• Deleting state=absent disables Protocol Independent Multicast (PIM) on a VRF.

Parameters

Parameter	Comments
annotation string	User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead. If the value is not specified in the task and environment variable ACI_ANNOTATION then the default value will be used. Default: "orchestrator:ansible"
any_source_multicast aliases: asm, any_source dictionary	Configuration container for Protocol Independent Multicast (PIM) Any Source Multicast (ASM) settings.
expiry aliases: expiry_seconds integer	The expiry time in seconds. The APIC defaults to default-timeout when unset during creation. Specify 0 to reset to default-timeout.
max_rate aliases: max_rate_per_second integer	The maximum rate per second. The APIC defaults to 65535 when unset during creation.
shared_range_route_map aliases: shared_range_policy string	The DN of the Route Map. Specify "" to remove the Route Map configuration.
source_group_expiry_route_map aliases: sg_expiry_route_map string	The DN of the Route Map. Specify "" to remove the Route Map configuration.
source_ip aliases: source, source_ip_address string	The source IP address.
auto_rp aliases: auto dictionary	Configuration container for Protocol Independent Multicast (PIM) Auto-Rendezvous Point (Auto-RP) settings.
ma_filter aliases: filter, route_map, route_map_dn string	The DN of the Route Map. Specify "" to remove the Route Map configuration.
rp_updates aliases: control, ctrl list / elements=string	The control state of the Auto-Rendezvous Point (Auto-RP) policy. Specify [] to remove the control state configuration. Choices: "forward" "listen"
bootstrap_router aliases: bsr, bootstrap dictionary	Configuration container for Protocol Independent Multicast (PIM) Bootstrap Router (BSR) settings.
bsr_filter aliases: filter, route_map, route_map_dn string	The DN of the Route Map. Specify "" to remove the Route Map configuration.
rp_updates aliases: control, ctrl list / elements=string	The control state of the Bootstrap Router (BSR) policy. Specify [] to remove the control state configuration. Choices: "forward" "listen"
certificate_name aliases: cert_name string	The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a private_key filename was provided, this defaults to the private_key basename, without extension. If PEM-formatted content was provided for private_key, this defaults to the username value. If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.
host aliases: hostname string	IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.
output_level string	Influence the output of this ACI module. normal means the standard output, incl. current dict info adds informational output, incl. previous, proposed and sent dicts debug adds debugging output, incl. filter_string, method, response, status and url information If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead. Choices: "debug" "info" "normal" ← (default)
output_path string	Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.
owner_key string	User-defined string for the ownerKey attribute of an ACI object. This attribute represents a key for enabling clients to own their data for entity correlation. If the value is not specified in the task, the value of environment variable ACI_OWNER_KEY will be used instead.
owner_tag string	User-defined string for the ownerTag attribute of an ACI object. This attribute represents a tag for enabling clients to add their own data. For example, to indicate who created this object. If the value is not specified in the task, the value of environment variable ACI_OWNER_TAG will be used instead.
password string	The password to use for authentication. This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead. If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
pim_setting dictionary	Configuration container for Protocol Independent Multicast (PIM) settings.
control_state aliases: control, ctrl list / elements=string	The action(s) to take when a loop is detected. Specify [] to remove the control state configuration. Choices: "fast" "strict"
mtu integer	The MTU size supported for multicast. The APIC defaults to 1500 when unset during creation.
port integer	Port number to be used for REST connection. The default value depends on parameter use_ssl. If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.
private_key aliases: cert_key string	Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default certificate_name that is used. This option is mutual exclusive with password. If password is provided too, it will be ignored. If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.
resource_policy dictionary	Configuration container for Protocol Independent Multicast (PIM) resource policy.
maximum_limit aliases: max integer	The Max Multicast Entries. The APIC defaults to unlimited when unset during creation. Specify 0 to reset to unlimited.
reserved_multicast_entries aliases: rsvd integer	The Reserved Multicast Entries. The APIC defaults to undefined when unset during creation. Required when reserved_route_map is provided.
reserved_route_map aliases: route_map, route_map_dn string	The DN of the Route Map. Specify "" to remove the Route Map configuration. Required when reserved_multicast_entries is provided.
source_specific_multicast aliases: ssm, specific_source dictionary	Configuration container for Protocol Independent Multicast (PIM) Source Specific Multicast (SSM) settings.
group_range_route_map aliases: group_range_policy string	The DN of the Route Map. Specify "" to remove the Route Map configuration.
state string	Use present or absent for adding or removing. Use query for listing an object or multiple objects. Choices: "absent" "present" ← (default) "query"
suppress_verification aliases: no_verification, no_verify, suppress_verify boolean	If true, a verifying GET will not be sent after a POST update to APIC. If the value is not specified in the task, the value of environment variable ACI_NO_VERIFICATION will be used instead. The default value is false. WARNING - This causes the current return value to be set to the proposed value. The current object including default values will be unverifiable in a single task. Choices: false true
tenant aliases: tenant_name string	The name of an existing tenant.
timeout integer	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead. The default value is 30.
use_proxy boolean	If false, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead. The default value is true. Choices: false true
use_ssl boolean	If false, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead. The default value is true when the connection is local. Choices: false true
username aliases: user string	The username to use for authentication. If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead. The default value is admin.
validate_certs boolean	If false, SSL certificates will not be validated. This should only set to false when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead. The default value is true. Choices: false true
vrf aliases: vrf_name string	The name of an existing VRF.

Notes

Note

• The tenant and vrf must exist before using this module in your playbook. The cisco.aci.aci_tenant and cisco.aci.aci_vrf modules can be used for this.

See Also

See also

APIC Management Information Model reference

More information about the internal APIC class pim:CtxP.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Enable Multicast on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    state: present
  delegate_to: localhost

- name: Change Multicast PIM Settings on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    pim_setting:
      mtu: 2000
      control_state: [ fast, strict ]
    state: present
  delegate_to: localhost

- name: Change Multicast Resource Policy on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    resource_policy:
      maximum_limit: 100
      reserved_multicast_entries: 20
      reserved_route_map: uni/tn-ansible_test/rtmap-ansible_test
    state: present
  delegate_to: localhost

- name: Remove Route-Map from Multicast Resource Policy on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    resource_policy:
      reserved_route_map: ""
    state: present
  delegate_to: localhost

- name: Change Multicast Any Source Multicast (ASM) Settings on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    any_source_multicast:
      shared_range_route_map: uni/tn-ansible_test/rtmap-ansible_test
      source_group_expiry_route_map: uni/tn-ansible_test/rtmap-ansible_test
      expiry: 500
      max_rate: 64000
      source_ip: 1.1.1.1
    state: present
  delegate_to: localhost

- name: Change Multicast Source Specific Multicast (SSM) Settings on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    source_specific_multicast:
      group_range_route_map: uni/tn-ansible_test/rtmap-ansible_test
    state: present
  delegate_to: localhost

- name: Change Multicast Bootstrap Router (BSR) Settings on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    bootstrap_router:
      bsr_filter: uni/tn-ansible_test/rtmap-ansible_test
      rp_updates: [ forward, listen ]
    state: present
  delegate_to: localhost

- name: Change Multicast Auto-Rendezvous Point (Auto-RP) Settings on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    auto_rp:
      ma_filter: uni/tn-ansible_test/rtmap-ansible_test
      rp_updates: [ forward, listen ]
    state: present
  delegate_to: localhost

- name: Disable Multicast on a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    state: absent
  delegate_to: localhost

- name: Query Multicast Settings for a VRF
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    tenant: ansible_tenant
    vrf: ansible_vrf
    state: query
  delegate_to: localhost
  register: query_result

- name: Query Multicast Settings for all VRFs
  cisco.aci.aci_vrf_multicast:
    host: apic
    username: admin
    password: SomeSecretePassword
    state: query
  delegate_to: localhost
  register: query_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
current list / elements=string	The existing configuration from the APIC after the module has finished Returned: success Sample: [{"fvTenant": {"attributes": {"descr": "Production environment", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]
error dictionary	The error information as returned from the APIC Returned: failure Sample: {"code": "122", "text": "unknown managed object class foo"}
filter_string string	The filter string used for the request Returned: failure or debug Sample: "?rsp-prop-include=config-only"
method string	The HTTP method used for the request to the APIC Returned: failure or debug Sample: "POST"
previous list / elements=string	The original configuration from the APIC before the module has started Returned: info Sample: [{"fvTenant": {"attributes": {"descr": "Production", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]
proposed dictionary	The assembled configuration from the user-provided parameters Returned: info Sample: {"fvTenant": {"attributes": {"descr": "Production environment", "name": "production"}}}
raw string	The raw output returned by the APIC REST API (xml or json) Returned: parse error Sample: "<?xml version=\"1.0\" encoding=\"UTF-8\"?><imdata totalCount=\"1\"><error code=\"122\" text=\"unknown managed object class \"/></imdata>"
response string	The HTTP response from the APIC Returned: failure or debug Sample: "OK (30 bytes)"
sent list / elements=string	The actual/minimal configuration pushed to the APIC Returned: info Sample: {"fvTenant": {"attributes": {"descr": "Production environment"}}}
status integer	The HTTP status from the APIC Returned: failure or debug Sample: 200
url string	The HTTP url used for the request to the APIC Returned: failure or debug Sample: "https://10.11.12.13/api/mo/uni/tn-production.json"

Authors

• Tim Cragg (@timcragg)

• Akini Ross (@akinross)

Collection links

• Issue Tracker
• Repository (Sources)