cisco.dnac.device_configs_backup_workflow_manager module – Device Configs Backup module for taking configuration backups of reachable devices in the Cisco Catalyst Center.

Note

This module is part of the cisco.dnac collection (version 6.21.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.device_configs_backup_workflow_manager.

New in cisco.dnac 6.14.0

Synopsis 

Manage operation related to taking the backup of running config, static config and vlan.dat.bat

Requirements 

The below requirements are needed on the host that executes this module.

dnacentersdk == 2.9.2
python >= 3.5

Parameters 

Parameter	Comments
config list / elements=dictionary / required	List of details of the devices for which configuration backups need to be taken. At least one parameter from the suboptions must be provided in the config. When providing multiple parameters at once (excluding “site_list”), all the filters will be applied together in an AND operation. This means that only the devices matching all the specified criteria will be included in the configuration backup operation. For example, if both `hostname` and `device_type` are provided, only devices matching both the specified hostname and device type will be selected. Note - Once all devices matching the parameters are retrieved, any device that is not reachable or is an Access Point (AP) will be skipped.
collection_status string	Specifies the list of collection status of the device(s) as displayed in the inventory GUI of the Cisco Catalyst Center. For example - [“Managed”]
family string	Specifies list of families for which device configuration backups need to be taken. For example - [“Switches and Hubs”, “Routers”]
file_password string	Optional file password for zipping and unzipping the config file. Password must meet the following criteria - - Minimum password length is 8 - It should contain atleast one lower case letter, one uppercase letter, - one digit - one special characters from -=\\\\\\\\;,./~!@$%^&*()_+{}[]\|:?”
file_path string	The location or directory where the configuration backups need to be exported on the local system. If the “file_path” is not provided, the backup file(s) will be stored in a directory named “tmp” in the same directory as the playbook. Default: `"tmp"`
hostname_list string	List of hostnames of the devices for which a configuration backup is to be taken. The hostnames must be identical to those displayed under the inventory section in the Cisco Catalyst Center GUI. For example - [“DC-T-9300.cisco.local”, “NY-BN-9300.cisco.local”]
ip_address_list string	List of IP addresses of the devices for which configuration backups need to be taken. The IP addresses should match those displayed in the inventory GUI of the Cisco Catalyst Center, specifically the management IP addresses of the devices. For example - [“204.1.2.2”, “204.1.2.5”, “204.1.2.4”]
mac_address_list string	Specifies list of MAC addresses of the devices for which configuration backups are to be taken.
serial_number_list string	Specifies the list of serial numbers of the devices for which configuration backups need to be taken. For example - [“FCW2225C020”, “FJB2334D06N”, “FJC2327U0S2”, “FJC2721271T”]
series string	Specifies the list of series of the device(s) for a specific device type for which configuration backups need to be taken. For example - [“Cisco Catalyst 9300 Series Switches”]
site_list string	Specifies a list of sites. The module takes a configuration backup of all devices located within the specified site(s). Each site should be represented as a string value that indicates the complete hierarchical path of the site. For example - [“Global/USA/San Francisco/Building_2/floor_1”, “Global/USA/New York/Building_3/floor_2”] Note - When additional parameters are provided along with `site_list`, the operation will include all devices in the specified site(s) and any devices matching the additional criteria (excluding `site_list`). In other words, the operation will be performed on devices within the site(s) and those that meet the additional criteria.
type string	Specifies the list of types of device(s) from a specific device family for which configuration backups need to be taken. For example - [“Cisco Catalyst 9300 Switch”, “Cisco Catalyst 9500 Switch”]
config_verify boolean	Set to True to verify the Cisco Catalyst Center config after applying the playbook config. Choices: `false` ← (default) `true`
dnac_api_task_timeout integer	Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged. Default: `1200`
dnac_debug boolean	Indicates whether debugging is enabled in the Cisco Catalyst Center SDK. Choices: `false` ← (default) `true`
dnac_host string / required	The hostname of the Cisco Catalyst Center.
dnac_log boolean	Flag to enable/disable playbook execution logging. When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name. When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name ‘dnac.log’. When false, - Logging is disabled. If the log file doesn’t exist, - It is created in append or write mode based on the “dnac_log_append” flag. If the log file exists, - It is overwritten or appended based on the “dnac_log_append” flag. Choices: `false` ← (default) `true`
dnac_log_append boolean	Determines the mode of the file. Set to True for ‘append’ mode. Set to False for ‘write’ mode. Choices: `false` `true` ← (default)
dnac_log_file_path string	Governs logging. Logs are recorded if dnac_log is True. If path is not specified, - When ‘dnac_log_append’ is True, ‘dnac.log’ is generated in the current Ansible directory; logs are appended. - When ‘dnac_log_append’ is False, ‘dnac.log’ is generated; logs are overwritten. If path is specified, - When ‘dnac_log_append’ is True, the file opens in append mode. - When ‘dnac_log_append’ is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True. Default: `"dnac.log"`
dnac_log_level string	Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG]. CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages. ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages. WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages. INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages. DEBUG provides detailed diagnostic info. Displays all log messages. Default: `"WARNING"`
dnac_password string	The password for authentication at the Cisco Catalyst Center.
dnac_port string	Specifies the port number associated with the Cisco Catalyst Center. Default: `"443"`
dnac_task_poll_interval integer	Specifies the interval in seconds between successive calls to the API to retrieve task details. Default: `2`
dnac_username aliases: user string	The username for authentication at the Cisco Catalyst Center. Default: `"admin"`
dnac_verify boolean	Flag to enable or disable SSL certificate verification. Choices: `false` `true` ← (default)
dnac_version string	Specifies the version of the Cisco Catalyst Center that the SDK should use. Default: `"2.2.3.3"`
state string	The state of Cisco Catalyst Center after module completion. Choices: `"merged"` ← (default)
validate_response_schema boolean	Flag for Cisco Catalyst Center SDK to enable the validation of request bodies against a JSON schema. Choices: `false` `true` ← (default)

Notes 

Note

SDK Methods used are sites.Sites.get_site Site_design.Site_design.get_sites sites.Sites.get_membership site_design.Site_design.get_site_assigned_network_devices devices.Devices.get_device_list devices.Devices.get_device_by_id configuration_archive.ConfigurationsArchive.export_device_configurations file.Files.download_a_file_by_fileid
Paths used are get /dna/intent/api/v1/site get /dna/intent/api/v1/membership/${siteId} get /dna/intent/api/v1/network-device post /dna/intent/api/v1/network-device-archive/cleartext get /dna/intent/api/v1/file/${fileId} get /dna/intent/api/v1/networkDevices/assignedToSite get /dna/intent/api/v1/sites get /dna/intent/api/v1/network-device/${id}
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins instead embedded connection manager from Cisco Catalyst Center SDK
The parameters starting with dnac_ are used by the Cisco Catalyst Center Python SDK to establish the connection

Examples 

- name: Take backup of all devices in the Cisco Catalyst Center
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - file_password: qsaA12!asdasd

- name: Take backup of device(s) using hostname(s)
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - hostname_list: ["DC-T-9300.cisco.local", "NY-BN-9300.cisco.local"]
          file_path: backup

- name: Take backup of device(s) using hostname(s) and provide file password
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - hostname_list: ["DC-T-9300.cisco.local"]
          file_path: backup
          file_password: qsaA12!asdasd

- name: Take backup of all devices in a site(s)
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - site_list: ["Global/USA/RTP/BLD10", "Global/USA/New York/BLDNYC/FLOOR1"]
          file_path: backup

- name: Take backup of device(s) using IP Address List
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - ip_address_list: ["204.1.2.5", "204.1.2.4", "204.1.2.2"]
          file_path: backup

- name: Take backup of device(s) using MAC Address List
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - mac_address_list: ["d4:ad:bd:c1:67:00", " 00:b6:70:32:b8:00", "0c:75:bd:42:c3:80", "90:88:55:07:59:00"]
          file_path: backup

- name: Take backup of device(s) using Serial Number List
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - serial_number_list: ["FCW2225C020", "FJB2334D06N", "FJC2327U0S2", "FJC2721271T"]
          file_path: backup

- name: Take backup of device(s) using Family List
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - family_list: ["Switches and Hubs", "Routers"]
          file_path: backup

- name: Take backup of device(s) using Device Family Type List
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - type_list: ["Cisco Catalyst 9300 Switch"]
          file_path: backup

- name: Take backup of device(s) using Device Series
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - series_list: ["Cisco Catalyst 9300 Series Switches"]
          file_path: backup

- name: Take backup of devices with certain Collection Status
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - collection_status_list: ["Managed"]
          file_path: backup

- name: Take backup of device(s) in a site and also that meet other parameters
  cisco.dnac.device_configs_backup_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: true
    dnac_log_level: "{{dnac_log_level}}"
    state: merged
    config:
        - site_list: ["Global"]
          family_list: ["Switches and Hubs"]
          series_list: ["Cisco Catalyst 9300 Series Switches"]
          ip_address_list: ["204.1.2.5"]
          file_path: backup

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
response_1 dictionary	A dictionary with with the response returned by the Cisco Catalyst Center Python SDK Returned: always Sample: `"{\n \"response\":\n {\n \"response\": String,\n \"version\": String\n },\n \"msg\": String\n}\n"`
response_2 list / elements=string	A string with the response returned by the Cisco Catalyst Center Python SDK Returned: always Sample: `["{\n \"response\": []", "\n \"msg\": String\n}\n"]`

Authors

Abinash Mishra (@abimishr) Rugvedi Kapse (@rukapse) Madhan Sankaranarayanan (@madhansansel) Sonali Deepthi Kesali (@skesali)

cisco.dnac.device_configs_backup_workflow_manager module – Device Configs Backup module for taking configuration backups of reachable devices in the Cisco Catalyst Center.

Synopsis

Requirements

Parameters

Notes

Examples

Return Values