cisco.dnac.ipam_site_ip_address_pools_id module – Resource module for Ipam Site Ip Address Pools Id
Note
This module is part of the cisco.dnac collection (version 6.27.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.ipam_site_ip_address_pools_id.
New in cisco.dnac 6.17.0
Synopsis
This module represents an alias of the module ipam_site_ip_address_pools_id_v1
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
Id path parameter. The `id` of the IP address subpool to delete. |
|
Ipam Site Ip Address Pools Id’s ipV4AddressSpace. |
|
The DHCP server(s) for this subnet. |
|
The DNS server(s) for this subnet. |
|
The gateway IP address for this subnet. |
|
The non-tunnel global pool for this reserve pool (which matches this IP address type). Once added this value cannot be changed. |
|
The network mask component, as a decimal, for the CIDR notation of this subnet. |
|
If the prefixLength is 64, this option may be enabled. Stateless Address Auto-configuration (SLAAC) allows network devices to select their IP address without the use of DHCP servers. Choices:
|
|
The IP address component of the CIDR notation for this subnet. |
|
Ipam Site Ip Address Pools Id’s ipV6AddressSpace. |
|
The DHCP server(s) for this subnet. |
|
The DNS server(s) for this subnet. |
|
The gateway IP address for this subnet. |
|
The non-tunnel global pool for this reserve pool (which matches this IP address type). Once added this value cannot be changed. |
|
The network mask component, as a decimal, for the CIDR notation of this subnet. |
|
If the prefixLength is 64, this option may be enabled. Stateless Address Auto-configuration (SLAAC) allows network devices to select their IP address without the use of DHCP servers. Choices:
|
|
The IP address component of the CIDR notation for this subnet. |
|
The name for this reserve IP pool. Only letters, numbers, ‘-’ (hyphen), ‘_’ (underscore), ‘.’ (period), and ‘/’ (forward slash) are allowed. |
|
Once created, a subpool type cannot be changed. LAN Assigns IP addresses to LAN interfaces of applicable VNFs and underlay LAN automation. Management Assigns IP addresses to management interfaces. A management network is a dedicated network connected to VNFs for VNF management. Service Assigns IP addresses to service interfaces. Service networks are used for communication within VNFs. WAN Assigns IP addresses to NFVIS for UCS-E provisioning. Generic used for all other network types. |
|
The `id` of the site that this subpool belongs to. This must be the `id` of a non-Global site. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
Notes
Note
SDK Method used are network_settings.NetworkSettings.release_an_ip_address_subpool_v1, network_settings.NetworkSettings.updates_an_ip_address_subpool_v1,
Paths used are delete /dna/intent/api/v1/ipam/siteIpAddressPools/{id}, put /dna/intent/api/v1/ipam/siteIpAddressPools/{id},
It should be noted that this module is an alias of ipam_site_ip_address_pools_id_v1
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Network Settings ReleaseAnIPAddressSubpoolV1
Complete reference of the ReleaseAnIPAddressSubpoolV1 API.
- Cisco DNA Center documentation for Network Settings UpdatesAnIPAddressSubpoolV1
Complete reference of the UpdatesAnIPAddressSubpoolV1 API.
Examples
- name: Delete by id
cisco.dnac.ipam_site_ip_address_pools_id:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
state: absent
id: string
- name: Update by id
cisco.dnac.ipam_site_ip_address_pools_id:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
state: present
id: string
ipV4AddressSpace:
dhcpServers:
- string
dnsServers:
- string
gatewayIpAddress: string
globalPoolId: string
prefixLength: 0
slaacSupport: true
subnet: string
ipV6AddressSpace:
dhcpServers:
- string
dnsServers:
- string
gatewayIpAddress: string
globalPoolId: string
prefixLength: 0
slaacSupport: true
subnet: string
name: string
poolType: string
siteId: string
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: |