cisco.dnac.network_devices_device_controllability_settings_v1_info module – Information module for Network Devices Device Controllability Settings V1

Note

This module is part of the cisco.dnac collection (version 6.27.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.network_devices_device_controllability_settings_v1_info.

New in cisco.dnac 6.15.0

Synopsis

  • Get all Network Devices Device Controllability Settings V1.

  • Device Controllability is a system-level process on Catalyst Center that enforces state synchronization for some device-layer features. Its purpose is to aid in the deployment of required network settings that Catalyst Center needs to manage devices. Changes are made on network devices during discovery, when adding a device to Inventory, or when assigning a device to a site. If changes are made to any settings that are under the scope of this process, these changes are applied to the network devices during the Provision and Update Telemetry Settings operations, even if Device Controllability is disabled. The following device settings will be enabled as part of Device Controllability when devices are discovered. - SNMP Credentials. - NETCONF Credentials. Subsequent to discovery, devices will be added to Inventory. The following device settings will be enabled when devices are added to inventory. - Cisco TrustSec CTS Credentials. The following device settings will be enabled when devices are assigned to a site. Some of these settings can be defined at a site level under Design > Network Settings > Telemetry & Wireless. - Wired Endpoint Data Collection Enablement. - Controller Certificates. - SNMP Trap Server Definitions. - Syslog Server Definitions. - Application Visibility. - Application QoS Policy. - Wireless Service Assurance WSA. - Wireless Telemetry. - DTLS Ciphersuite. - AP Impersonation. If Device Controllability is disabled, Catalyst Center does not configure any of the preceding credentials or settings on devices during discovery, at runtime, or during site assignment. However, the telemetry settings and related configuration are pushed when the device is provisioned or when the update Telemetry Settings action is performed. Catalyst Center identifies and automatically corrects the following telemetry configuration issues on the device. - SWIM certificate issue. - IOS WLC NA certificate issue. - PKCS12 certificate issue. - IOS telemetry configuration issu.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • dnacentersdk >= 2.4.9

  • python >= 3.5

Parameters

Parameter

Comments

dnac_debug

boolean

Flag for Cisco DNA Center SDK to enable debugging.

Choices:

  • false ← (default)

  • true

dnac_host

string / required

The Cisco DNA Center hostname.

dnac_password

string

The Cisco DNA Center password to authenticate.

dnac_port

integer

The Cisco DNA Center port.

Default: 443

dnac_username

aliases: user

string

The Cisco DNA Center username to authenticate.

Default: "admin"

dnac_verify

boolean

Flag to enable or disable SSL certificate verification.

Choices:

  • false

  • true ← (default)

dnac_version

string

Informs the SDK which version of Cisco DNA Center to use.

Default: "2.3.7.6"

headers

dictionary

Additional headers.

validate_response_schema

boolean

Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema.

Choices:

  • false

  • true ← (default)

Notes

Note

  • SDK Method used are site_design.SiteDesign.get_device_controllability_settings_v1,

  • Paths used are get /dna/intent/api/v1/networkDevices/deviceControllability/settings,

  • Supports check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

  • The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco DNA Center documentation for Site Design GetDeviceControllabilitySettingsV1

Complete reference of the GetDeviceControllabilitySettingsV1 API.

Examples

- name: Get all Network Devices Device Controllability Settings V1
  cisco.dnac.network_devices_device_controllability_settings_v1_info:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    headers: "{{my_headers | from_json}}"
  register: result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

dnac_response

dictionary

A dictionary or list with the response returned by the Cisco DNAC Python SDK

Returned: always

Sample: {"response": {"autocorrectTelemetryConfig": true, "deviceControllability": true}, "version": "string"}

Authors

  • Rafael Campos (@racampos)