cisco.dnac.pnp_workflow_manager module – Resource module for Site and PnP related functions

Note

This module is part of the cisco.dnac collection (version 6.24.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.pnp_workflow_manager.

New in cisco.dnac 6.6.0

Synopsis 

Manage operations add device, claim device and unclaim device of Onboarding Configuration(PnP) resource
API to add device to pnp inventory and claim it to a site.
API to delete device from the pnp inventory.
API to reset the device from errored state.

Requirements 

The below requirements are needed on the host that executes this module.

dnacentersdk == 2.6.10
python >= 3.9

Parameters 

Parameter	Comments
config list / elements=dictionary / required	List of details of device being managed.
device_info list / elements=dictionary / required	Provides the device-specific information required for adding devices to the PnP database that are not already present. For adding a single device, the list should contain exactly one set of device information. If a site name is also provided, the device can be claimed immediately after being added. For bulk import, the list must contain information for more than one device. Bulk import is intended solely for adding devices; claiming must be performed with separate tasks or configurations.
hostname string	Defines the desired hostname for the PnP device after it has been claimed. The hostname can only be assigned or changed during the claim process, not during bulk or single device additions.
is_sudi_required boolean	Sudi Authentication requiremnet’s flag. Choices: `false` `true`
pid string	Pnp Device’s pid.
serial_number string	Pnp Device’s serial_number.
state string	Represents the onboarding state of the PnP device. Possible values are ‘Unclaimed’, ‘Claimed’, or ‘Provisioned’.
gateway string	Gateway IP address of the Wireless Controller for getting pinged
golden_image boolean	Is the image to be condifgured tagged as golden image Choices: `false` `true`
image_name string	Name of image to be configured on the device
ip_interface_name string	Specifies the interface name utilized for Plug and Play (PnP) by the Wireless Controller. Ensure this interface is pre-configured on the Controller prior to device claiming.
pnp_type string	Specifies the device type for the Plug and Play (PnP) device. - Options include ‘Default’, ‘CatalystWLC’, ‘AccessPoint’, or ‘StackSwitch’. - ‘Default’ is applicable to switches and routers. - ‘CatalystWLC’ should be selected for 9800 series wireless controllers. - ‘AccessPoint’ is used when claiming an access point. - ‘StackSwitch’ should be chosen for a group of switches that operate as a single switch, typically used in the access layer. Choices: `"Default"` ← (default) `"CatalystWLC"` `"AccessPoint"` `"StackSwitch"`
project_name string	Name of the project under which the template is present Default: `"Onboarding Configuration"`
rf_profile string	Radio Frequecy (RF) profile of the AP being claimed. RF Profiles allow you to tune groups of APs that share a common coverage zone together. They selectively change how Radio Resource Management will operate the APs within that coverage zone. HIGH RF profile allows you to use more power and allows to join AP with the client in an easier fashion. TYPICAL RF profile is a blend of moderate power and moderate visibility to the client. LOW RF profile allows you to consume lesser power and has least visibility to the client. Choices: `"HIGH"` `"LOW"` `"TYPICAL"`
site_name string	Name of the site for which device will be claimed.
static_ip string	Management IP address of the Wireless Controller
subnet_mask string	Subnet Mask of the Management IP address of the Wireless Controller
template_name string	Name of template to be configured on the device. Supported for EWLC from Cisco Catalyst Center release version 2.3.7.x onwards.
template_params dictionary	Parameter values for the parameterised templates. Each varibale has a value that needs to be passed as key-value pair in the dictionary. We can pass values as variable_name:variable_value. Supported for EWLC from Cisco Catalyst Center release version 2.3.7.x onwards.
vlan_id string	Vlan Id allocated for claimimg of Wireless Controller
config_verify boolean	Set to True to verify the Cisco Catalyst Center config after applying the playbook config. Choices: `false` ← (default) `true`
dnac_api_task_timeout integer	Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged. Default: `1200`
dnac_debug boolean	Indicates whether debugging is enabled in the Cisco Catalyst Center SDK. Choices: `false` ← (default) `true`
dnac_host string / required	The hostname of the Cisco Catalyst Center.
dnac_log boolean	Flag to enable/disable playbook execution logging. When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name. When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name ‘dnac.log’. When false, - Logging is disabled. If the log file doesn’t exist, - It is created in append or write mode based on the “dnac_log_append” flag. If the log file exists, - It is overwritten or appended based on the “dnac_log_append” flag. Choices: `false` ← (default) `true`
dnac_log_append boolean	Determines the mode of the file. Set to True for ‘append’ mode. Set to False for ‘write’ mode. Choices: `false` `true` ← (default)
dnac_log_file_path string	Governs logging. Logs are recorded if dnac_log is True. If path is not specified, - When ‘dnac_log_append’ is True, ‘dnac.log’ is generated in the current Ansible directory; logs are appended. - When ‘dnac_log_append’ is False, ‘dnac.log’ is generated; logs are overwritten. If path is specified, - When ‘dnac_log_append’ is True, the file opens in append mode. - When ‘dnac_log_append’ is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True. Default: `"dnac.log"`
dnac_log_level string	Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG]. CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages. ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages. WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages. INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages. DEBUG provides detailed diagnostic info. Displays all log messages. Default: `"WARNING"`
dnac_password string	The password for authentication at the Cisco Catalyst Center.
dnac_port string	Specifies the port number associated with the Cisco Catalyst Center. Default: `"443"`
dnac_task_poll_interval integer	Specifies the interval in seconds between successive calls to the API to retrieve task details. Default: `2`
dnac_username aliases: user string	The username for authentication at the Cisco Catalyst Center. Default: `"admin"`
dnac_verify boolean	Flag to enable or disable SSL certificate verification. Choices: `false` `true` ← (default)
dnac_version string	Specifies the version of the Cisco Catalyst Center that the SDK should use. Default: `"2.2.3.3"`
state string	The state of Cisco Catalyst Center after module completion. Choices: `"merged"` ← (default) `"deleted"`
validate_response_schema boolean	Flag for Cisco Catalyst Center SDK to enable the validation of request bodies against a JSON schema. Choices: `false` `true` ← (default)

Notes 

Note

SDK Method used are device_onboarding_pnp.DeviceOnboardingPnp.add_device, device_onboarding_pnp.DeviceOnboardingPnp.get_device_list, device_onboarding_pnp.DeviceOnboardingPnp.claim_a_device_to_a_site, device_onboarding_pnp.DeviceOnboardingPnp.delete_device_by_id_from_pnp, device_onboarding_pnp.DeviceOnboardingPnp.get_device_count, device_onboarding_pnp.DeviceOnboardingPnp.get_device_by_id, device_onboarding_pnp.DeviceOnboardingPnp.update_device, sites.Sites.get_site, software_image_management_swim.SoftwareImageManagementSwim.get_software_image_details, configuration_templates.ConfigurationTemplates.gets_the_templates_available
Paths used are post /dna/intent/api/v1/onboarding/pnp-device post /dna/intent/api/v1/onboarding/pnp-device/site-claim post /dna/intent/api/v1/onboarding/pnp-device/{id} get /dna/intent/api/v1/onboarding/pnp-device/count get /dna/intent/api/v1/onboarding/pnp-device put /onboarding/pnp-device/${id} get /dna/intent/api/v1/site get /dna/intent/api/v1/image/importation get /dna/intent/api/v1/template-programmer/template
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins instead embedded connection manager from Cisco Catalyst Center SDK
The parameters starting with dnac_ are used by the Cisco Catalyst Center Python SDK to establish the connection

Examples 

- name: Import multiple switches in bulk only
  cisco.dnac.pnp_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log_level: "{{dnac_log_level}}"
    dnac_log: True
    state: merged
    config_verify: True
    config:
        - device_info:
            - serial_number: QD2425L8M7
              state: Unclaimed
              pid: c9300-24P
              is_sudi_required: False
            - serial_number: QTC2320E0H9
              state: Unclaimed
              pid: c9300-24P
              hostname: Test-123
            - serial_number: ETC2320E0HB
              state: Unclaimed
              pid: c9300-24P

- name: Add a new EWLC and claim it
  cisco.dnac.pnp_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log_level: "{{dnac_log_level}}"
    dnac_log: True
    state: merged
    config_verify: True
    config:
        - device_info:
            - serial_number: FOX2639PAY7
              hostname: New_WLC
              state: Unclaimed
              pid: C9800-CL-K9
          site_name: Global/USA/San Francisco/BGL_18
          template_name: Ansible_PNP_WLC
          template_params:
            hostname: IAC-EWLC-Claimed
          project_name: Onboarding Configuration
          image_name: C9800-40-universalk9_wlc.17.12.01.SPA.bin
          golden_image: true
          pnp_type: CatalystWLC
          static_ip: 204.192.101.10
          subnet_mask: 255.255.255.0
          gateway: 204.192.101.1
          vlan_id: 1101
          ip_interface_name: TenGigabitEthernet0/0/0

- name: Claim a pre-added switch, apply a template, and perform an image upgrade for a specific site
  cisco.dnac.pnp_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log_level: "{{dnac_log_level}}"
    dnac_log: True
    state: merged
    config_verify: True
    config:
        - device_info:
            - serial_number: FJC271924EQ
              hostname: Switch
              state: Unclaimed
              pid: C9300-48UXM
          site_name: Global/USA/San Francisco/BGL_18
          template_name: "Ansible_PNP_Switch"
          image_name: cat9k_iosxe_npe.17.03.07.SPA.bin
          project_name: Onboarding Configuration
          template_params:
            hostname: SJC-Switch-1
            interface: TwoGigabitEthernet1/0/2

- name: Remove multiple devices from the PnP dashboard safely (ignores non-existent devices)
  cisco.dnac.pnp_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log_level: "{{dnac_log_level}}"
    dnac_log: True
    state: deleted
    config_verify: True
    config:
        - device_info:
            - serial_number: QD2425L8M7
            - serial_number: FTC2320E0HA
            - serial_number: FKC2310E0HB

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
response_1 dictionary	A dictionary with the response returned by the Cisco Catalyst Center Python SDK Returned: always Sample: `"{\n \"response\":\n {\n \"response\": String,\n \"version\": String\n },\n \"msg\": String\n}\n"`
response_2 list / elements=string	A list with the response returned by the Cisco Catalyst Center Python SDK Returned: always Sample: `["{\n \"response\": []", "\n \"msg\": String\n}\n"]`
response_3 dictionary	A string with the response returned by the Cisco Catalyst Center Python SDK Returned: always Sample: `"{\n \"response\": String,\n \"msg\": String\n}\n"`

Authors

Abinash Mishra (@abimishr) Madhan Sankaranarayanan (@madhansansel) Rishita Chowdhary (@rishitachowdhary)

cisco.dnac.pnp_workflow_manager module – Resource module for Site and PnP related functions

Synopsis

Requirements

Parameters

Notes

Examples

Return Values