cisco.dnac.sda_fabric_devices_layer2_handoffs_sda_transits module – Resource module for Sda Fabric Devices Layer2 Handoffs Sda Transits

Note

This module is part of the cisco.dnac collection (version 6.27.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.sda_fabric_devices_layer2_handoffs_sda_transits.

New in cisco.dnac 6.14.0

Synopsis

• This module represents an alias of the module sda_fabric_devices_layer2_handoffs_sda_transits_v1

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

• dnacentersdk >= 2.4.9

• python >= 3.5

Parameters

Parameter	Comments
dnac_debug boolean	Flag for Cisco DNA Center SDK to enable debugging. Choices: false ← (default) true
dnac_host string / required	The Cisco DNA Center hostname.
dnac_password string	The Cisco DNA Center password to authenticate.
dnac_port integer	The Cisco DNA Center port. Default: 443
dnac_username aliases: user string	The Cisco DNA Center username to authenticate. Default: "admin"
dnac_verify boolean	Flag to enable or disable SSL certificate verification. Choices: false true ← (default)
dnac_version string	Informs the SDK which version of Cisco DNA Center to use. Default: "2.3.7.6"
fabricId string	FabricId query parameter. ID of the fabric this device belongs to.
networkDeviceId string	NetworkDeviceId query parameter. Network device ID of the fabric device.
payload list / elements=dictionary	Sda Fabric Devices Layer2 Handoffs Sda Transits’s payload.
affinityIdDecider integer	Affinity id decider value of the border node. When the affinity id prime value is the same on multiple devices, the affinity id decider value is used as a tiebreaker. Allowed range is 0-2147483647. The lower the relative value of affinity id decider, the higher the preference for a destination border node.
affinityIdPrime integer	Affinity id prime value of the border node. It supersedes the border priority to determine border node preference. Allowed range is 0-2147483647. The lower the relative value of affinity id prime, the higher the preference for a destination border node.
connectedToInternet boolean	Set this true to allow associated site to provide internet access to other sites through sd-access. Choices: false true
fabricId string	ID of the fabric this device is assigned to. (updating this field is not allowed).
isMulticastOverTransitEnabled boolean	Set this true to configure native multicast over multiple sites that are connected to an sd-access transit. Choices: false true
networkDeviceId string	Network device ID of the fabric device. (updating this field is not allowed).
transitNetworkId string	ID of the transit network of the layer 3 handoff sda transit. (updating this field is not allowed).
validate_response_schema boolean	Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices: false true ← (default)

Notes

Note

• SDK Method used are sda.Sda.add_fabric_devices_layer3_handoffs_with_sda_transit_v1, sda.Sda.delete_fabric_device_layer3_handoffs_with_sda_transit_v1, sda.Sda.update_fabric_devices_layer3_handoffs_with_sda_transit_v1,

• Paths used are post /dna/intent/api/v1/sda/fabricDevices/layer3Handoffs/sdaTransits, delete /dna/intent/api/v1/sda/fabricDevices/layer3Handoffs/sdaTransits, put /dna/intent/api/v1/sda/fabricDevices/layer3Handoffs/sdaTransits,

• It should be noted that this module is an alias of sda_fabric_devices_layer2_handoffs_sda_transits_v1

• Does not support check_mode

• The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

• The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco DNA Center documentation for SDA AddFabricDevicesLayer3HandoffsWithSdaTransitV1

Complete reference of the AddFabricDevicesLayer3HandoffsWithSdaTransitV1 API.

Cisco DNA Center documentation for SDA DeleteFabricDeviceLayer3HandoffsWithSdaTransitV1

Complete reference of the DeleteFabricDeviceLayer3HandoffsWithSdaTransitV1 API.

Cisco DNA Center documentation for SDA UpdateFabricDevicesLayer3HandoffsWithSdaTransitV1

Complete reference of the UpdateFabricDevicesLayer3HandoffsWithSdaTransitV1 API.

Examples

- name: Update all
  cisco.dnac.sda_fabric_devices_layer2_handoffs_sda_transits:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: present
    payload:
    - affinityIdDecider: 0
      affinityIdPrime: 0
      connectedToInternet: true
      fabricId: string
      isMulticastOverTransitEnabled: true
      networkDeviceId: string
      transitNetworkId: string

- name: Delete all
  cisco.dnac.sda_fabric_devices_layer2_handoffs_sda_transits:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: absent
    fabricId: string
    networkDeviceId: string

- name: Create
  cisco.dnac.sda_fabric_devices_layer2_handoffs_sda_transits:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: present
    payload:
    - affinityIdDecider: 0
      affinityIdPrime: 0
      connectedToInternet: true
      fabricId: string
      isMulticastOverTransitEnabled: true
      networkDeviceId: string
      transitNetworkId: string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
dnac_response dictionary	A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

Authors

• Rafael Campos (@racampos)

Collection links

• Issue Tracker
• Repository (Sources)