cisco.dnac.sda_fabric_transits_workflow_manager module – Resource module for SDA fabric transits

Note

This module is part of the cisco.dnac collection (version 6.27.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.sda_fabric_transits_workflow_manager.

New in cisco.dnac 6.18.0

Synopsis

  • Manage operations on SDA fabric transits.

  • API to create transit networks.

  • API to update transit networks.

  • API to delete transit networks.

Requirements

The below requirements are needed on the host that executes this module.

  • dnacentersdk >= 2.9.2

  • python >= 3.9

Parameters

Parameter

Comments

config

list / elements=dictionary / required

A list of SDA fabric transit configurations.

Each entry in the list represents a transit network configuration.

sda_fabric_transits

list / elements=dictionary

SDA fabric transit configurations.

ip_transit_settings

dictionary

The configuration settings for IP based transit.

Required when the type is set to IP_BASED_TRANSIT.

IP_BASED_TRANSIT cannot be updated.

autonomous_system_number

string

Used by routing protocols like BGP to manage routing between different autonomous systems.

Autonomous System Number (ANS) should be from 1 to 4294967295.

The ASN should be unique for every IP-based transits.

Required when the transit_type is set to IP_BASED_TRANSIT.

routing_protocol_name

string

Defines the protocol for determining the best paths for data transmission between networks.

Choices:

  • "BGP" ← (default)

name

string

The name of the SDA fabric transit.

It facilitates seamless communication between different network segments.

Required for the operations in the SDA fabric transits.

sda_transit_settings

dictionary

The configuration settings for SDA-based transit.

Required when the transit_type is set to SDA_LISP_PUB_SUB_TRANSIT or SDA_LISP_BGP_TRANSIT.

control_plane_network_device_ips

list / elements=string

Specifies the IP addresses of the network devices that form the control plane.

Required when the transit_type is set to either SDA_LISP_BGP_TRANSIT or SDA_LISP_PUB_SUB_TRANSIT.

Atleast one control plane network device is required.

A maximum of 2 control plane network devices are allowed when the transit_type is SDA_LISP_BGP_TRANSIT.

A maximum of 4 control plane network devices are allowed when the transit_type is SDA_LISP_PUB_SUB_TRANSIT.

SDA_LISP_PUB_SUB_TRANSIT supports only devices with IOS XE 17.6 or later.

The devices must be present in the Fabric site or zone.

is_multicast_over_transit_enabled

boolean

Determines whether multicast traffic is permitted to traverse the transit network.

Enabling this option allows the distribution of data to multiple recipients across different network segments.

Available only when the transit type is set to SDA_LISP_PUB_SUB_TRANSIT.

Choices:

  • false

  • true

transit_type

string

Type of the fabric tranist. IP_BASED_TRANSIT - Responsible for managing IP routing and ensures data flow between various segments of the network. SDA_LISP_PUB_SUB_TRANSIT - Facilitates the decoupling of location and identity information for devices, enabling dynamic routing. SDA_LISP_BGP_TRANSIT - Integrates LISP with BGP to manage and optimize routing decisions between different network segments.

Choices:

  • "IP_BASED_TRANSIT" ← (default)

  • "SDA_LISP_PUB_SUB_TRANSIT"

  • "SDA_LISP_BGP_TRANSIT"

config_verify

boolean

Set to True to verify the Cisco Catalyst Center after applying the playbook config.

Choices:

  • false ← (default)

  • true

dnac_api_task_timeout

integer

Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged.

Default: 1200

dnac_debug

boolean

Indicates whether debugging is enabled in the Cisco Catalyst Center SDK.

Choices:

  • false ← (default)

  • true

dnac_host

string / required

The hostname of the Cisco Catalyst Center.

dnac_log

boolean

Flag to enable/disable playbook execution logging.

When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name.

When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name ‘dnac.log’.

When false, - Logging is disabled.

If the log file doesn’t exist, - It is created in append or write mode based on the “dnac_log_append” flag.

If the log file exists, - It is overwritten or appended based on the “dnac_log_append” flag.

Choices:

  • false ← (default)

  • true

dnac_log_append

boolean

Determines the mode of the file. Set to True for ‘append’ mode. Set to False for ‘write’ mode.

Choices:

  • false

  • true ← (default)

dnac_log_file_path

string

Governs logging. Logs are recorded if dnac_log is True.

If path is not specified, - When ‘dnac_log_append’ is True, ‘dnac.log’ is generated in the current Ansible directory; logs are appended. - When ‘dnac_log_append’ is False, ‘dnac.log’ is generated; logs are overwritten.

If path is specified, - When ‘dnac_log_append’ is True, the file opens in append mode. - When ‘dnac_log_append’ is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True.

Default: "dnac.log"

dnac_log_level

string

Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG].

CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages.

ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages.

WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages.

INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages.

DEBUG provides detailed diagnostic info. Displays all log messages.

Default: "WARNING"

dnac_password

string

The password for authentication at the Cisco Catalyst Center.

dnac_port

string

Specifies the port number associated with the Cisco Catalyst Center.

Default: "443"

dnac_task_poll_interval

integer

Specifies the interval in seconds between successive calls to the API to retrieve task details.

Default: 2

dnac_username

aliases: user

string

The username for authentication at the Cisco Catalyst Center.

Default: "admin"

dnac_verify

boolean

Flag to enable or disable SSL certificate verification.

Choices:

  • false

  • true ← (default)

dnac_version

string

Specifies the version of the Cisco Catalyst Center that the SDK should use.

Default: "2.2.3.3"

state

string

The state of Cisco Catalyst Center after module completion.

Choices:

  • "merged" ← (default)

  • "deleted"

validate_response_schema

boolean

Flag for Cisco Catalyst Center SDK to enable the validation of request bodies against a JSON schema.

Choices:

  • false

  • true ← (default)

Notes

Note

  • SDK Method used are devices.Devices.get_device_list, sda.Sda.get_transit_networks, sda.Sda.add_transit_networks, sda.Sda.update_transit_networks, sda.Sda.delete_transit_network_by_id, task.Task.get_tasks_by_id, task.Task.get_task_details_by_id,

  • Paths used are get /dna/intent/api/v1/network-device, get /dna/intent/api/v1/sda/transitNetworks, post /dna/intent/api/v1/sda/transitNetworks, put /dna/intent/api/v1/sda/transitNetworks, delete /dna/intent/api/v1/sda/transitNetworks/${id}, get /dna/intent/api/v1/tasks/${id} get /dna/intent/api/v1/tasks/${id}/detail

  • Does not support check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins instead embedded connection manager from Cisco Catalyst Center SDK

  • The parameters starting with dnac_ are used by the Cisco Catalyst Center Python SDK to establish the connection

Examples

- name: Create SDA fabric transit of transit_type IP_BASED_TRANSIT
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit
      transit_type: IP_BASED_TRANSIT
      ip_transit_settings:
        routing_protocol_name: BGP
        autonomous_system_number: 1234

- name: Create SDA fabric transit of transit_type SDA_LISP_BGP_TRANSIT
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit
      transit_type: SDA_LISP_BGP_TRANSIT
      sda_transit_settings:
        control_plane_network_device_ips:
        - string
        - string

- name: Create SDA fabric transit of transit_type SDA_LISP_PUB_SUB_TRANSIT
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit
      transit_type: SDA_LISP_PUB_SUB_TRANSIT
      sda_transit_settings:
        is_multicast_over_transit_enabled: false
        control_plane_network_device_ips:
        - string
        - string
        - string
        - string

- name: Update SDA fabric transit of transit_type SDA_LISP_BGP_TRANSIT
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit
      transit_type: SDA_LISP_BGP_TRANSIT
      sda_transit_settings:
        control_plane_network_device_ips:
        - string
        - string

- name: Update the multicast over transit
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit
      transit_type: SDA_LISP_PUB_SUB_TRANSIT
      sda_transit_settings:
        is_multicast_over_transit_enabled: true

- name: Update the control plane network devices
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit
      transit_type: SDA_LISP_PUB_SUB_TRANSIT
      sda_transit_settings:
        control_plane_network_device_ips:
        - string
        - string
        - string

- name: Delete SDA fabric transit
  cisco.dnac.sda_fabric_transits_workflow_manager:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: deleted
    config_verify: True
    config:
    - sda_fabric_transits:
      - name: sample_transit1
      - name: sample_transit2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

response_1

dictionary

A dictionary or list with the response returned by the Cisco Catalyst Center Python SDK

Returned: always

Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

response_2

dictionary

A dictionary or list with the response returned by the Cisco Catalyst Center Python SDK

Returned: always

Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

response_3

dictionary

A dictionary or list with the response returned by the Cisco Catalyst Center Python SDK

Returned: always

Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

Authors

  • Muthu Rakesh (@MUTHU-RAKESH-27) Madhan Sankaranarayanan (@madhansansel)