cisco.dnac.site_kpi_summaries_info module – Information module for Site Kpi Summaries Info
Note
This module is part of the cisco.dnac collection (version 6.27.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.site_kpi_summaries_info.
New in cisco.dnac 6.17.0
Synopsis
This module represents an alias of the module site_kpi_summaries_v1_info
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Attribute query parameter. List of attributes related to site analytics. If these are provided, then only those attributes will be part of response along with the default attributes. Examples `attribute=coverageAverage` (single attribute requested) `attribute=coverageFailureMetrics&attribute=coverageTotalCount` (multiple attributes requested). |
|
Band query parameter. WiFi frequency band that client or Access Point operates. Band value is represented in Giga Hertz - GHz Examples `band=5` (single band requested) `band=2.4&band=6` (multiple band requested). |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. |
|
FailureCategory query parameter. Category of failure when a client fails to meet the threshold. Examples `failureCategory=AUTH` (single failure category requested) `failureCategory=AUTH&failureCategory=DHCP` (multiple failure categories requested). |
|
FailureReason query parameter. Reason for failure when a client fails to meet the threshold. Examples `failureReason=MOBILITY_FAILURE` (single ssid requested) `failureReason=REASON_IPLEARN_CONNECT_TIMEOUT&failureReason=ST_EAP_TIMEOUT` (multiple ssid requested). |
|
Additional headers. |
|
Limit query parameter. Maximum number of records to return. |
|
Offset query parameter. Specifies the starting point within all records returned by the API. It’s one based offset. The starting value is 1. |
|
Order query parameter. The sort order of the field ascending or descending. |
|
SiteHierarchy query parameter. The full hierarchical breakdown of the site tree starting from Global site name and ending with the specific site name. The Root site is named “Global” (Ex. `Global/AreaName/BuildingName/FloorName`) This field supports wildcard asterisk (`*`) character search support. E.g. `*/San*, */San, /San*` Examples `?siteHierarchy=Global/AreaName/BuildingName/FloorName` (single siteHierarchy requested) `?siteHierarchy=Global/AreaName/BuildingName/FloorName&siteHierarchy=Global /AreaName2/BuildingName2/FloorName2` (multiple siteHierarchies requested). |
|
SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyIds requested). |
|
SiteId query parameter. The UUID of the site. (Ex. `flooruuid`) Examples `?siteId=id1` (single id requested) `?siteId=id1&siteId=id2&siteId=id3` (multiple ids requested). |
|
SiteType query parameter. The type of the site. A site can be an area, building, or floor. Default when not provided will be `floor,building,area` Examples `?siteType=area` (single siteType requested) `?siteType=area&siteType=building&siteType=floor` (multiple siteTypes requested). |
|
SortBy query parameter. Field name on which sorting needs to be done. |
|
Ssid query parameter. SSID is the name of wireless network to which client connects to. It is also referred to as WLAN ID - Wireless Local Area Network Identifier. Examples `ssid=Alpha` (single ssid requested) `ssid=Alpha&ssid=Guest` (multiple ssid requested). |
|
StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. |
|
TaskId query parameter. Used to retrieve asynchronously processed & stored data. When this parameter is used, the rest of the request params will be ignored. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
|
View query parameter. <p>The name of the View. Each view represents a specific data set. Please refer to the <code>SiteAnalyticsView</code> Model for supported views. View is predefined set of attributes supported by the API. Only the attributes related to the given view will be part of the API response along with default attributes. If multiple views are provided, then response will contain attributes from all those views. If no views are specified, all attributes will be returned.</p><table><thead><tr><th>View Name</th><th>Included Attributes</th></tr></thead><tbody><tr><td><code>coverage</code></td><td>coverageAverage, coverageSuccessPercentage, coverageSuccessCount, coverageTotalCount, coverageFailureCount, coverageClientCount, coverageImpactedEntities, coverageFailureImpactedEntities, coverageFailureMetrics</td>< /tr><tr><td><code>onboardingAttempts</code></td><td>onboardingAttemptsSuccessPercentage, onboardingAttemptsSuccessCount, onboardingAttemptsTotalCount, onboardingAttemptsFailureCount, onboardingAttemptsClientCount, onboardingAttemptsImpactedEntities, onboardingAttemptsFailureImpactedEntities, onboardingAttemptsFailureMetrics</td></tr><tr><td><code>onboardin gDuration</code></td><td>onboardingDurationAverage, onboardingDurationSuccessPercentage, onboardingDurationSuccessCount, onboardingDurationTotalCount, onboardingDurationFailureCount, onboardingDurationClientCount, onboardingDurationImpactedEntities, onboardingDurationFailureImpactedEntities, onboardingDurationFailureMetrics</td></tr><tr><td><code>roamingAt tempts</code></td><td>roamingAttemptsSuccessPercentage, roamingAttemptsSuccessCount, roamingAttemptsTotalCount, roamingAttemptsFailureCount, roamingAttemptsClientCount, roamingAttemptsImpactedEntities, roamingAttemptsFailureImpactedEntities, roamingAttemptsFailureMetrics</td></tr><tr><td><code>roamingDuration</code></td><td>roamingDurationAverage, roamingDurationSuccessPercentage, roamingDurationSuccessCount, roamingDurationTotalCount, roamingDurationFailureCount, roamingDurationClientCount, roamingDurationImpactedEntities, roamingDurationFailureImpactedEntities, roamingDurationFailureMetrics</td></tr><tr><td><code>connectionSpeed</code></td><td>connectionSpeedAverage, connectionSpeedSuccessPercentage, connectionSpeedSuccessCount, connectionSpeedTotalCount, connectionSpeedFailureCount, connectionSpeedClientCount, connectionSpeedImpactedEntities, connectionSpeedFailureImpactedEntities, connectionSpeedFailureMetrics</td></tr></tbody></table><p>Examples <code>view=connectionSpeed</code> (single view requested) <code>view=roamingDuration&view=roamingAttempts</code> (multiple views requested) </p>. |
Notes
Note
SDK Method used are sites.Sites.get_site_analytics_for_the_child_sites_of_given_parent_site_and_other_query_parameters_v1,
Paths used are get /dna/data/api/v1/siteKpiSummaries,
It should be noted that this module is an alias of site_kpi_summaries_v1_info
Supports
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Sites GetSiteAnalyticsForTheChildSitesOfGivenParentSiteAndOtherQueryParametersV1
Complete reference of the GetSiteAnalyticsForTheChildSitesOfGivenParentSiteAndOtherQueryParametersV1 API.
Examples
- name: Get all Site Kpi Summaries Info
cisco.dnac.site_kpi_summaries_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
taskId: string
startTime: 0
endTime: 0
siteHierarchy: string
siteHierarchyId: string
siteId: string
siteType: string
ssid: string
band: string
failureCategory: string
failureReason: string
view: string
attribute: string
limit: 0
offset: 0
sortBy: string
order: string
register: result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: |