cisco.dnac.wireless_settings_anchor_groups module – Resource module for Wireless Settings Anchor Groups

Note

This module is part of the cisco.dnac collection (version 6.27.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.wireless_settings_anchor_groups.

New in cisco.dnac 6.17.0

Synopsis

  • This module represents an alias of the module wireless_settings_anchor_groups_v1

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • dnacentersdk >= 2.4.9

  • python >= 3.5

Parameters

Parameter

Comments

anchorGroupName

string

Anchor Group Name. Max length is 32 characters.

dnac_debug

boolean

Flag for Cisco DNA Center SDK to enable debugging.

Choices:

  • false ← (default)

  • true

dnac_host

string / required

The Cisco DNA Center hostname.

dnac_password

string

The Cisco DNA Center password to authenticate.

dnac_port

integer

The Cisco DNA Center port.

Default: 443

dnac_username

aliases: user

string

The Cisco DNA Center username to authenticate.

Default: "admin"

dnac_verify

boolean

Flag to enable or disable SSL certificate verification.

Choices:

  • false

  • true ← (default)

dnac_version

string

Informs the SDK which version of Cisco DNA Center to use.

Default: "2.3.7.6"

mobilityAnchors

list / elements=dictionary

Wireless Settings Anchor Groups’s mobilityAnchors.

anchorPriority

string

This indicates anchor priority. Priority values range from 1 (high) to 3 (low). Primary, secondary or tertiary and defined priority is displayed with guest anchor. Only one priority value is allowed per anchor WLC.

deviceName

string

Peer Host Name.

ipAddress

string

This indicates Mobility public IP address. Allowed formats are 192.168.0.1, 10.0.0.1, 255.255.255.255.

macAddress

string

Peer Device mobility MAC address. Allowed formats are 0a0b.0c01.0211, 0a0b0c010211, 0a 0b 0c 01 02 11.

managedAnchorWlc

boolean

This indicates whether the Wireless LAN Controller supporting Anchor is managed by the Network Controller or not. True means this is managed by Network Controller.

Choices:

  • false

  • true

mobilityGroupName

string

Peer Device mobility group Name. Must be alphanumeric without {!,<,space,?/’} and maximum of 31 characters.

peerDeviceType

string

Indicates peer device mobility belongs to AireOS or IOS-XE family.

privateIp

string

This indicates private management IP address. Allowed formats are 192.168.0.1, 10.0.0.1, 255.255.255.255.

validate_response_schema

boolean

Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema.

Choices:

  • false

  • true ← (default)

Notes

Note

  • SDK Method used are wireless.Wireless.create_anchor_group_v1,

  • Paths used are post /dna/intent/api/v1/wirelessSettings/anchorGroups,

  • It should be noted that this module is an alias of wireless_settings_anchor_groups_v1

  • Does not support check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

  • The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco DNA Center documentation for Wireless CreateAnchorGroupV1

Complete reference of the CreateAnchorGroupV1 API.

Examples

- name: Create
  cisco.dnac.wireless_settings_anchor_groups:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: present
    anchorGroupName: string
    mobilityAnchors:
    - anchorPriority: string
      deviceName: string
      ipAddress: string
      macAddress: string
      managedAnchorWlc: true
      mobilityGroupName: string
      peerDeviceType: string
      privateIp: string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

dnac_response

dictionary

A dictionary or list with the response returned by the Cisco DNAC Python SDK

Returned: always

Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

Authors

  • Rafael Campos (@racampos)