cisco.ios.ios_lacp_interfaces module – Resource module to configure LACP interfaces.

Note

This module is part of the cisco.ios collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_lacp_interfaces.

New in cisco.ios 1.0.0

Synopsis

  • This module provides declarative management of LACP on Cisco IOS network devices lacp_interfaces.

Aliases: lacp_interfaces

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of LACP lacp_interfaces option

fast_switchover

boolean

LACP fast switchover supported on this port channel.

Choices:

  • false

  • true

max_bundle

integer

LACP maximum number of ports to bundle in this port channel.

Refer to vendor documentation for valid port values.

name

string / required

Name of the Interface for configuring LACP.

port_priority

integer

LACP priority on this interface.

Refer to vendor documentation for valid port values.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command show running-config | section ^interface.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "rendered"

  • "gathered"

  • "parsed"

Notes

Note

Examples

# Using merged
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
# interface GigabitEthernet0/2
#  shutdown
# interface GigabitEthernet0/3
#  shutdown

- name: Merge provided configuration with device configuration
  cisco.ios.ios_lacp_interfaces:
    config:
      - name: GigabitEthernet0/1
        port_priority: 10
      - name: GigabitEthernet0/2
        port_priority: 20
      - name: GigabitEthernet0/3
        port_priority: 30
      - name: Port-channel10
        fast_switchover: true
        max_bundle: 5
    state: merged

# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 5
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

# Using overridden
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: Override device configuration of all lacp_interfaces with provided configuration
  cisco.ios.ios_lacp_interfaces:
    config:
      - name: GigabitEthernet0/1
        port_priority: 20
      - name: Port-channel10
        max_bundle: 2
    state: overridden

# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp max-bundle 2
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/2
#  shutdown
# interface GigabitEthernet0/3
#  shutdown

# Using replaced
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp max-bundle 5
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: Replaces device configuration of listed lacp_interfaces with provided configuration
  cisco.ios.ios_lacp_interfaces:
    config:
      - name: GigabitEthernet0/3
        port_priority: 40
      - name: Port-channel10
        fast_switchover: true
        max_bundle: 2
    state: replaced

# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 2
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 40

# Using Deleted
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  flowcontrol receive on
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: "Delete LACP attributes of given interfaces (Note: This won't delete the interface itself)"
  cisco.ios.ios_lacp_interfaces:
    config:
      - name: GigabitEthernet0/1
    state: deleted

# After state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured LLDP module attributes)"
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
# interface Port-channel20
#  lacp max-bundle 2
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
#  lacp port-priority 10
# interface GigabitEthernet0/2
#  shutdown
#  lacp port-priority 20
# interface GigabitEthernet0/3
#  shutdown
#  lacp port-priority 30

- name: "Delete LACP attributes for all configured interfaces (Note: This won't delete the interface itself)"
  cisco.ios.ios_lacp_interfaces:
    state: deleted

# After state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
#  shutdown
# interface GigabitEthernet0/2
#  shutdown
# interface GigabitEthernet0/3
#  shutdown

# Using Gathered

# Before state:
# -------------
#
# vios#sh running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 2
# interface Port-channel40
#  lacp max-bundle 5
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  lacp port-priority 30
# interface GigabitEthernet0/2
#  lacp port-priority 20

- name: Gather listed LACP interfaces with provided configurations
  cisco.ios.ios_lacp_interfaces:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "fast_switchover": true,
#             "max_bundle": 2,
#             "name": "Port-channel10"
#         },
#         {
#             "max_bundle": 5,
#             "name": "Port-channel40"
#         },
#         {
#             "name": "GigabitEthernet0/0"
#         },
#         {
#             "name": "GigabitEthernet0/1",
#             "port_priority": 30
#         },
#         {
#             "name": "GigabitEthernet0/2",
#             "port_priority": 20
#         }
#     ]

# After state:
# ------------
#
# vios#sh running-config | section ^interface
# interface Port-channel10
#  lacp fast-switchover
#  lacp max-bundle 2
# interface Port-channel40
#  lacp max-bundle 5
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  lacp port-priority 30
# interface GigabitEthernet0/2
#  lacp port-priority 20

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_lacp_interfaces:
    config:
      - name: GigabitEthernet0/1
        port_priority: 10
      - name: GigabitEthernet0/2
        port_priority: 20
      - name: Port-channel10
        fast_switchover: true
        max_bundle: 2
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "interface GigabitEthernet0/1",
#         "lacp port-priority 10",
#         "interface GigabitEthernet0/2",
#         "lacp port-priority 20",
#         "interface Port-channel10",
#         "lacp max-bundle 2",
#         "lacp fast-switchover"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/1
# lacp port-priority 10
# interface GigabitEthernet0/2
# lacp port-priority 20
# interface Port-channel10
# lacp max-bundle 2 fast-switchover

- name: Parse the commands for provided configuration
  cisco.ios.ios_lacp_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "name": "GigabitEthernet0/1",
#             "port_priority": 10
#         },
#         {
#             "name": "GigabitEthernet0/2",
#             "port_priority": 20
#         },
#         {
#             "fast_switchover": true,
#             "max_bundle": 2,
#             "name": "Port-channel10"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The configuration as structured data after module completion.

Returned: when changed

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

list / elements=string

The configuration as structured data prior to module invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["interface GigabitEthernet 0/1", "lacp port-priority 30"]

Authors

  • Sumit Jaiswal (@justjais)