cisco.iosxr.iosxr_logging_global module – Resource module to configure logging.

Note

This module is part of the cisco.iosxr collection (version 10.2.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_logging_global.

New in cisco.iosxr 2.4.0

Synopsis

  • This module manages the logging attributes of Cisco IOSXR network devices

Parameters

Parameter

Comments

config

dictionary

A dictionary of logging options.

archive

dictionary

logging to a persistent device(disk/harddisk)

archive_length

integer

The maximum no of weeks of log to maintain.

archive_size

integer

The total size of the archive.

device

string

Configure the archive device

file_size

integer

The maximum file size for a single log file..

frequency

string

The collection interval for logs.

Choices:

  • "daily"

  • "weekly"

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

threshold

integer

Threshold percent <1-99>.

buffered

dictionary

Set buffered logging parameters

discriminator

list / elements=dictionary

Establish MD-Buffer association

match_params

string

Set match/no-match discriminator.

Choices:

  • "match1"

  • "match2"

  • "match3"

  • "nomatch1"

  • "nomatch2"

  • "nomatch3"

name

string

discriminator name.

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

size

integer

Logging buffer size

console

dictionary

Set console logging parameters

discriminator

list / elements=dictionary

Establish MD-Buffer association

match_params

string

Set match/no-match discriminator.

Choices:

  • "match1"

  • "match2"

  • "match3"

  • "nomatch1"

  • "nomatch2"

  • "nomatch3"

name

string

discriminator name.

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warning"

state

string

Enable or disable logging.

Choices:

  • "enabled"

  • "disabled"

correlator

dictionary

Configure properties of the event correlator

buffer_size

integer

Configure size of the correlator buffer.

rule_sets

list / elements=dictionary

Configure a specified correlation ruleset.

name

string

Name of the ruleset

rulename

list / elements=string

Name of the rule

rules

list / elements=dictionary

Configure a specified correlation rule.

context_correlation

boolean

Specify enable correlation on context.

Choices:

  • false

  • true

reissue_nonbistate

boolean

Specify reissue of non-bistate alarms on parent clear.This option is allowed for the rules whose type is stateful.

Choices:

  • false

  • true

reparent

boolean

Specify reparent of alarm on parent clear.This option is allowed for the rules whose type is stateful.

Choices:

  • false

  • true

rule_name

string

name of rule.

rule_type

string

type of rule - stateful or nonstateful.

Choices:

  • "stateful"

  • "nonstateful"

timeout

integer

Specify timeout.

timeout_rootcause

integer

Specify timeout for root-cause.

events

dictionary

Configure event monitoring parameters.

buffer_size

integer

Set size of the local event buffer.

display_location

boolean

Include alarm source location in message text.

Choices:

  • false

  • true

filter_match

list / elements=string

Configure filter.

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

threshold

integer

Capacity alarm threshold.

facility

string

Facility parameter for syslog messages

Choices:

  • "auth"

  • "cron"

  • "daemon"

  • "kern"

  • "local0"

  • "local1"

  • "local2"

  • "local3"

  • "local4"

  • "local5"

  • "local6"

  • "local7"

  • "lpr"

  • "mail"

  • "news"

  • "sys10"

  • "sys11"

  • "sys12"

  • "sys13"

  • "sys14"

  • "sys9"

  • "syslog"

  • "user"

  • "uucp"

files

list / elements=dictionary

Set file logging.

maxfilesize

integer

Set max file size.

name

string

name of file.

path

string

Set file path.

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "info"

  • "notifications"

  • "warning"

format

boolean

Enable to send the syslog message rfc5424 format .

Choices:

  • false

  • true

history

dictionary

Configure syslog history table

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

size

integer

Logging buffer size

state

string

Enable or disable logging.

Choices:

  • "enabled"

  • "disabled"

hostnameprefix

string

Hostname prefix to add on msgs to servers.

hosts

list / elements=dictionary

Set syslog server IP address and parameters

host

string

IPv4/Ipv6 address or hostname of the syslog server

port

string

Set <0-65535> non-default Port.

Default: "default"

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "error"

  • "info"

  • "notifications"

  • "warning"

vrf

string

Set VRF option

Default: "default"

ipv4

dictionary

Mark the dscp/precedence bit for ipv4 packets.

dscp

string

Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.

precedence

string

Set precedence Please refer vendor document for valid entries.

ipv6

dictionary

Mark the dscp/precedence bit for ipv4 packets.

dscp

string

Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.

precedence

string

Set precedence Please refer vendor document for valid entries.

localfilesize

integer

Set size of the local log file

monitor

dictionary

Set terminal line (monitor) logging parameters

discriminator

list / elements=dictionary

Establish MD-Buffer association

match_params

string

Set match/no-match discriminator.

Choices:

  • "match1"

  • "match2"

  • "match3"

  • "nomatch1"

  • "nomatch2"

  • "nomatch3"

name

string

discriminator name.

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warning"

state

string

Enable or disable logging.

Choices:

  • "enabled"

  • "disabled"

source_interfaces

list / elements=dictionary

Specify interface for source address in logging transactions

interface

string

Interface name with number

vrf

string

VPN Routing/Forwarding instance name

suppress

dictionary

Suppress logging behaviour.

apply_rule

string

Apply suppression rule.

duplicates

boolean

Suppress consecutive duplicate messages.

Choices:

  • false

  • true

tls_servers

list / elements=dictionary

Secure server over tls.

name

string

Name for the tls peer configuration.

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warnings"

tls_hostname

string

Name of the logging host.

trustpoint

string

Name of the trustpoint configured.

vrf

string

name of vrf.

trap

dictionary

Set syslog server logging level

severity

string

Logging severity level

Choices:

  • "alerts"

  • "critical"

  • "debugging"

  • "emergencies"

  • "errors"

  • "informational"

  • "notifications"

  • "warning"

state

string

Enable or disable logging.

Choices:

  • "enabled"

  • "disabled"

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command show running-config | include logging.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

  • Tested against IOSXR 7.0.2.

  • This module works with connection network_cli.

Examples

# Using merged
# -----------------
# Before state
# RP/0/0/CPU0:10#show running-config logging
# Thu Feb  4 09:38:36.245 UTC
# % No such configuration item(s)
# RP/0/0/CPU0:10#
#
#
- name: Merge the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_logging_global:
    config:
      buffered:
        size: 2097152
        severity: warnings
      correlator:
        buffer_size: 1024
      events:
        display_location: true
      files:
        - maxfilesize: '1024'
          name: test
          path: test
          severity: info
      hostnameprefix: test
      hosts:
        - host: 1.1.1.1
          port: default
          severity: critical
          vrf: default
      ipv4:
        dscp: af11
      localfilesize: 1024
      monitor:
        severity: errors
      source_interfaces:
        - interface: GigabitEthernet0/0/0/0
          vrf: test
      tls_servers:
        - name: test
          tls_hostname: test2
          trustpoint: test2
          vrf: test
      trap:
        severity: informational
    state: merged
#
#
# After state:
# -------------------------------------------
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
#  vrf test
#  trustpoint test2
#  tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
# ------------------------------------------------
# Module execution
#
#     "after": {
#         "buffered": {
#             "severity": "errors"
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test1",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test1",
#         "hosts": [
#             {
#                 "host": "1.1.1.3",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv6": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "source_interfaces": [
#             {
#                 "interface": "GigabitEthernet0/0/0/0",
#                 "vrf": "test1"
#             }
#         ],
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test",
#                 "vrf": "test"
#             }
#         ]
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "logging buffered errors",
#         "logging correlator buffer-size 1024",
#         "logging hostnameprefix test1",
#         "logging ipv6 dscp af11",
#         "logging localfilesize 1024",
#         "logging trap disable",
#         "logging monitor disable",
#         "logging history disable",
#         "logging console disable",
#         "logging 1.1.1.3 vrf default severity critical port default",
#         "logging file test path test1 maxfilesize 1024 severity info",
#         "logging source-interface GigabitEthernet0/0/0/0 vrf test1",
#         "logging tls-server test tls-hostname test2",
#         "logging tls-server test trustpoint test",
#         "logging tls-server test vrf test"
#     ],
#     "invocation": {
#         "module_args": {
#             "config": {
#                 "archive": null,
#                 "buffered": {
#                     "discriminator": null,
#                     "severity": "errors",
#                     "size": null
#                 },
#                 "console": {
#                     "discriminator": null,
#                     "severity": null,
#                     "state": "disabled"
#                 },
#                 "correlator": {
#                     "buffer_size": 1024,
#                     "rule_set": null,
#                     "rules": null
#                 },
#                 "events": null,
#                 "facility": null,
#                 "files": [
#                     {
#                         "maxfilesize": "1024",
#                         "name": "test",
#                         "path": "test1",
#                         "severity": "info"
#                     }
#                 ],
#                 "format": null,
#                 "history": {
#                     "severity": null,
#                     "size": null,
#                     "state": "disabled"
#                 },
#                 "hostnameprefix": "test1",
#                 "hosts": [
#                     {
#                         "host": "1.1.1.3",
#                         "port": "default",
#                         "severity": "critical",
#                         "vrf": "default"
#                     }
#                 ],
#                 "ipv4": null,
#                 "ipv6": {
#                     "dscp": "af11",
#                     "precedence": null
#                 },
#                 "localfilesize": 1024,
#                 "monitor": {
#                     "discriminator": null,
#                     "severity": null,
#                     "state": "disabled"
#                 },
#                 "source_interfaces": [
#                     {
#                         "interface": "GigabitEthernet0/0/0/0",
#                         "vrf": "test1"
#                     }
#                 ],
#                 "suppress": null,
#                 "tls_servers": [
#                     {
#                         "name": "test",
#                         "severity": null,
#                         "tls_hostname": "test2",
#                         "trustpoint": "test",
#                         "vrf": "test"
#                     }
#                 ],
#                 "trap": {
#                     "severity": null,
#                     "state": "disabled"
#                 }
#             },
#             "running_config": null,
#             "state": "merged"
#         }
#     }
# }
#
# Using replaced:
# -----------------------------------------------------------
#
# Before state
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
#  vrf test
#  trustpoint test2
#  tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
# -----------------------------------------------------------
#
- name: Replace BGP configuration with provided configuration
  cisco.iosxr.iosxr_logging_global:
    state: replaced
    config:
      buffered:
        severity: errors
      correlator:
        buffer_size: 1024
      files:
        - maxfilesize: '1024'
          name: test
          path: test1
          severity: info
      hostnameprefix: test1
      hosts:
        - host: 1.1.1.3
          port: default
          severity: critical
          vrf: default
      ipv6:
        dscp: af11
      localfilesize: 1024
      monitor:
        severity: errors
      tls_servers:
        - name: test
          tls_hostname: test2
          trustpoint: test
          vrf: test
      trap:
        severity: critical
#
# After state:
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:31:51.709 UTC
# logging tls-server test
#  vrf test
#  trustpoint test
#  tls-hostname test2
# !
# logging file test path test1 maxfilesize 1024 severity info
# logging ipv6 dscp af11
# logging trap critical
# logging monitor errors
# logging buffered errors
# logging 1.1.1.3 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging hostnameprefix test1
# -----------------------------------------------------------------
#
# Module Execution:
# "after": {
#         "buffered": {
#             "severity": "errors"
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test1",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test1",
#         "hosts": [
#             {
#                 "host": "1.1.1.3",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv6": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "critical"
#         }
#     },
#     "before": {
#         "buffered": {
#             "severity": "warnings",
#             "size": 2097152
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "events": {
#             "display_location": true
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test",
#         "hosts": [
#             {
#                 "host": "1.1.1.1",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "source_interfaces": [
#             {
#                 "interface": "GigabitEthernet0/0/0/0",
#                 "vrf": "test"
#             }
#         ],
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test2",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "informational"
#         }
#     },
#     "changed": true,
#     "commands": [
#         "no logging buffered 2097152",
#         "no logging events display-location",
#         "no logging ipv4 dscp af11",
#         "no logging 1.1.1.1 vrf default severity critical port default",
#         "no logging source-interface GigabitEthernet0/0/0/0 vrf test",
#         "logging buffered errors",
#         "logging hostnameprefix test1",
#         "logging ipv6 dscp af11",
#         "logging trap critical",
#         "logging 1.1.1.3 vrf default severity critical port default",
#         "logging file test path test1 maxfilesize 1024 severity info",
#         "logging tls-server test trustpoint test"
#     ],
#
#
#
# Using deleted:
# -----------------------------------------------------------
# Before state:
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
#  vrf test
#  trustpoint test2
#  tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
# -----------------------------------------------------------
- name: Delete given logging_global configuration
  cisco.iosxr.iosxr_logging_global:
    state: deleted
#
# After state:
# RP/0/0/CPU0:10#show running-config
#
# -------------------------------------------------------------
# Module Execution:
#
# "after": {},
#     "before": {
#         "buffered": {
#             "severity": "warnings",
#             "size": 2097152
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "events": {
#             "display_location": true
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test",
#         "hosts": [
#             {
#                 "host": "1.1.1.1",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "source_interfaces": [
#             {
#                 "interface": "GigabitEthernet0/0/0/0",
#                 "vrf": "test"
#             }
#         ],
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test2",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "informational"
#         }
#     },
#     "changed": true,
#     "commands": [
#         "no logging buffered 2097152",
#         "no logging buffered warnings",
#         "no logging correlator buffer-size 1024",
#         "no logging events display-location",
#         "no logging hostnameprefix test",
#         "no logging ipv4 dscp af11",
#         "no logging localfilesize 1024",
#         "no logging monitor errors",
#         "no logging trap informational",
#         "no logging 1.1.1.1 vrf default severity critical port default",
#         "no logging file test path test maxfilesize 1024 severity info",
#         "no logging source-interface GigabitEthernet0/0/0/0 vrf test",
#         "no logging tls-server test"
#     ],
#     "invocation": {
#         "module_args": {
#             "config": null,
#             "running_config": null,
#             "state": "deleted"
#         }
#     }
#
#
#
# using gathered:
# ------------------------------------------------------------
# Before state:
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
#  vrf test
#  trustpoint test2
#  tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
#
- name: Gather iosxr_logging_global facts using gathered state
  cisco.iosxr.iosxr_logging_global:
    state: gathered
#
# -------------------------------------------------------------
# Module Execution:
#
# "changed": false,
# "gathered": {
#         "buffered": {
#             "severity": "warnings",
#             "size": 2097152
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "events": {
#             "display_location": true
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test",
#         "hosts": [
#             {
#                 "host": "1.1.1.1",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "source_interfaces": [
#             {
#                 "interface": "GigabitEthernet0/0/0/0",
#                 "vrf": "test"
#             }
#         ],
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test2",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "informational"
#         }
#     },
#     "invocation": {
#         "module_args": {
#             "config": null,
#             "running_config": null,
#             "state": "gathered"
#         }
# }
#
#
# Using parsed:
# ---------------------------------------------------------------
#
# parsed.cfg
#
# logging tls-server test
#  vrf test
#  trustpoint test2
#  tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
#
- name: Parse externally provided Logging global config to agnostic model
  cisco.iosxr.iosxr_logging_global:
    running_config: "{{ lookup('file', './fixtures/parsed.cfg') }}"
    state: parsed
# ----------------------------------------------------------------
# Module execution:
# "changed": false,
# "parsed": {
#         "buffered": {
#             "severity": "warnings",
#             "size": 2097152
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "events": {
#             "display_location": true
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test",
#         "hosts": [
#             {
#                 "host": "1.1.1.1",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "source_interfaces": [
#             {
#                 "interface": "GigabitEthernet0/0/0/0",
#                 "vrf": "test"
#             }
#         ],
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test2",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "informational"
#         }
#     }
#
#
# Using rendered:
# ----------------------------------------------------------------------------
- name: >-
    Render platform specific configuration lines with state rendered (without
    connecting to the device)
  cisco.iosxr.iosxr_logging_global:
    state: rendered
    config:
      buffered:
        size: 2097152
        severity: warnings
      correlator:
        buffer_size: 1024
      events:
        display_location: true
      files:
        - maxfilesize: '1024'
          name: test
          path: test
          severity: info
      hostnameprefix: test
      hosts:
        - host: 1.1.1.1
          port: default
          severity: critical
          vrf: default
      ipv4:
        dscp: af11
      localfilesize: 1024
      monitor:
        severity: errors
      source_interfaces:
        - interface: GigabitEthernet0/0/0/0
          vrf: test
      tls_servers:
        - name: test
          tls_hostname: test2
          trustpoint: test2
          vrf: test
      trap:
        severity: informational
# ----------------------------------------------------------------
# Module Execution:
# "rendered": [
#         "logging buffered errors",
#         "logging correlator buffer-size 1024",
#         "logging hostnameprefix test1",
#         "logging ipv6 dscp af11",
#         "logging localfilesize 1024",
#         "logging trap disable",
#         "logging monitor disable",
#         "logging history disable",
#         "logging console disable",
#         "logging 1.1.1.3 vrf default severity critical port default",
#         "logging file test path test1 maxfilesize 1024 severity info",
#         "logging source-interface GigabitEthernet0/0/0/0 vrf test1",
#         "logging tls-server test tls-hostname test2",
#         "logging tls-server test trustpoint test",
#         "logging tls-server test vrf test"
#     ]
#
# Using overridden:
# ---------------------------------------------------------------------------------
# Before state:
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
#  vrf test
#  trustpoint test2
#  tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
# -----------------------------------------------------------
#
- name: Overridde logging global configuration with provided configuration
  cisco.iosxr.iosxr_logging_global:
    state: overridden
    config:
      buffered:
        severity: errors
      correlator:
        buffer_size: 1024
      files:
        - maxfilesize: '1024'
          name: test
          path: test1
          severity: info
      hostnameprefix: test1
      hosts:
        - host: 1.1.1.3
          port: default
          severity: critical
          vrf: default
      ipv6:
        dscp: af11
      localfilesize: 1024
      monitor:
        severity: errors
      tls_servers:
        - name: test
          tls_hostname: test2
          trustpoint: test
          vrf: test
      trap:
        severity: critical
#
# After state:
# RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:31:51.709 UTC
# logging tls-server test
#  vrf test
#  trustpoint test
#  tls-hostname test2
# !
# logging file test path test1 maxfilesize 1024 severity info
# logging ipv6 dscp af11
# logging trap critical
# logging monitor errors
# logging buffered errors
# logging 1.1.1.3 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging hostnameprefix test1
# -----------------------------------------------------------------
#
# Module Execution:
# "after": {
#         "buffered": {
#             "severity": "errors"
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test1",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test1",
#         "hosts": [
#             {
#                 "host": "1.1.1.3",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv6": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "critical"
#         }
#     },
#     "before": {
#         "buffered": {
#             "severity": "warnings",
#             "size": 2097152
#         },
#         "correlator": {
#             "buffer_size": 1024
#         },
#         "events": {
#             "display_location": true
#         },
#         "files": [
#             {
#                 "maxfilesize": "1024",
#                 "name": "test",
#                 "path": "test",
#                 "severity": "info"
#             }
#         ],
#         "hostnameprefix": "test",
#         "hosts": [
#             {
#                 "host": "1.1.1.1",
#                 "port": "default",
#                 "severity": "critical",
#                 "vrf": "default"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "localfilesize": 1024,
#         "monitor": {
#             "severity": "errors"
#         },
#         "source_interfaces": [
#             {
#                 "interface": "GigabitEthernet0/0/0/0",
#                 "vrf": "test"
#             }
#         ],
#         "tls_servers": [
#             {
#                 "name": "test",
#                 "tls_hostname": "test2",
#                 "trustpoint": "test2",
#                 "vrf": "test"
#             }
#         ],
#         "trap": {
#             "severity": "informational"
#         }
#     },
#     "changed": true,
#     "commands": [
#         "no logging buffered 2097152",
#         "no logging events display-location",
#         "no logging ipv4 dscp af11",
#         "no logging 1.1.1.1 vrf default severity critical port default",
#         "no logging source-interface GigabitEthernet0/0/0/0 vrf test",
#         "logging buffered errors",
#         "logging hostnameprefix test1",
#         "logging ipv6 dscp af11",
#         "logging trap critical",
#         "logging 1.1.1.3 vrf default severity critical port default",
#         "logging file test path test1 maxfilesize 1024 severity info",
#         "logging tls-server test trustpoint test"
#     ],
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["logging file test path test1 maxfilesize 1024 severity info", "logging ipv6 dscp af11", "logging trap critical", "logging monitor errors", "logging buffered errors", "logging 1.1.1.3 vrf default severity critical port default"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["logging buffered errors", "logging correlator buffer-size 1024", "logging hostnameprefix test1", "logging ipv6 dscp af11", "logging localfilesize 1024", "logging trap disable", "logging monitor disable", "logging history disable", "logging console disable"]

Authors

  • Ashwini Mhatre (@amhatre)