cisco.iosxr.iosxr_ospfv3 module – Resource module to configure OSPFv3.

Note

This module is part of the cisco.iosxr collection (version 10.2.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ospfv3.

New in cisco.iosxr 1.1.0

Synopsis 

This module manages global ospfv3 configuration on devices running Cisco IOS-XR

Parameters 

Parameter	Comments
config dictionary	A list of ospfv3 process configuration
processes list / elements=dictionary	A list of ospfv3 instances configuration
address_family_unicast boolean	Enable unicast topology for ipv4 address family Choices: `false` `true`
areas list / elements=dictionary	Configure ospfv3 areas’ properties
area_id string / required	Area ID as IP address or integer
authentication dictionary	Enable authentication
disable boolean	Do not authenticate OSPFv3 packets Choices: `false` ← (default) `true`
ipsec dictionary	Specify IPSec AH authentication attributes
algorithim_type string	Specify the type of algorithim Choices: `"md5"` `"sha1"`
clear_key string	Specify key in cleartext form
key string	Specify key
password_key string	Specify key in encrypted form
spi integer	Specify the Security Parameter Index value
bfd dictionary	Configure BFD parameters
fast_detect dictionary	Configure fast detection
set boolean	Enable fast detection only Choices: `false` `true`
strict_mode boolean	Hold down neighbor session until BFD session is up Choices: `false` `true`
minimum_interval integer	Hello interval in milli-seconds
multiplier integer	Detect multiplier
cost integer	Interface cost
database_filter dictionary	Filter LSAs during synchronization and flooding
all_outgoing_lsa boolean	Filter all outgoing LSA Choices: `false` `true`
dead_interval integer	Interval after which a neighbor is declared dead
default_cost integer	Set the summary default-cost of a NSSA/stub area. Stub’s advertised external route metric
demand_circuit boolean	Enable/Disable ospfv3 demand circuit Choices: `false` `true`
distrinbute_rib_prefix_list_name string	Filter LSAs during synchronization and flooding
encryption dictionary	Encrypt and authenticate OSPFv3 packets
disable boolean	Do not encrypt OSPFv3 packets Choices: `false` ← (default) `true`
ipsec dictionary	Specify IPSec ESP encryption and authentication
esp dictionary	Specify encryption parameters
aes dictionary	This specify the aes algorithim
algorithim_type string	Specify the bit encryption for aes algorithim Choices: `"192"` `"256"`
clear_key string	Specify AES key in cleartext form
key string	Cleartext AES key
password_key string	Specify AES key in encrypted form
des dictionary	This specify the des algorithim
clear_key string	Specify AES key in cleartext form
key string	Cleartext AES key
password_key string	Specify AES key in encrypted form
null_encryption dictionary	Specify null encryption attributes
authentication dictionary	Specify authentication parameters
algorithim_type string	Specify the type of algorithim Choices: `"md5"` `"sha1"`
clear_key string	Specify key in cleartext form
key string	Specify key
password_key string	Specify key in encrypted form
triple_des dictionary	This specify the triple DES algorithim
clear_key string	Specify 3DES key in cleartext form
key string	Cleartext 3DES key
password_key string	Specify 3DES key in encrypted form
spi integer	Specify the Security Parameter Index value
fast_reroute dictionary	Specify IP Fast Reroute
disabled boolean	Disable IP fast reroute Choices: `false` `true`
per_link dictionary	Specify per-prefix computation
information_type string	Specify per-link LFA exclusion or FRR LFA candidate information Choices: `"exclude"` `"lfa_candidate"`
interface dictionary	Specify Per-link LFA exclusion information
bundle_ether list / elements=integer	Specify Aggregated Ethernet interface(s)
bvi list / elements=integer	Specify Bridge-Group Virtual Interface
fast_ethernet list / elements=string	Specify FastEthernet/IEEE 802.3 interface(s)
fiftygige list / elements=string	Specify FiftyGigE/IEEE 802.3 interface(s)
fortygige list / elements=string	Specify FortyGigE/IEEE 802.3 interface(s)
fourhundredgige list / elements=string	Specify FourHundredGigE/IEEE 802.3 interface(s)
gigabitethernet list / elements=string	Specify GigabitEthernet/IEEE 802.3 interface(s)
hundredgige list / elements=string	Specify HundredGigE/IEEE 802.3 interface(s)
mgmteth list / elements=string	Specify MgmtEth/IEEE 802.3 interface(s)
multilink list / elements=string	Specify Multilink network interface(s)
nve list / elements=integer	Specify Network Virtualization Endpoint Interface(s)
pos_int list / elements=integer	Specify Aggregated pos interface(s)
pw_ether list / elements=integer	Specify PWHE Ethernet Interface
pw_iw list / elements=integer	Specify PWHE VC11 IP Interworking Interface
serial list / elements=string	Specify Serial network interface(s)
srp list / elements=string	Specify SRP interface(s)
tengige list / elements=string	Specify TenGigabitEthernet/IEEE 802.3 interface(s)
tunnel_ip list / elements=integer	Specify GRE/IPinIP Tunnel Interface(s)
tunnel_ipsec list / elements=integer	Specify IPSec Tunnel interface(s)
tunnel_mpls integer	MPLS Transport Protocol Tunnel interface
tunnel_mte list / elements=integer	Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
twentyfivegige list / elements=string	Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
twohundredgige list / elements=string	Specify TwoHundredGigE/IEEE 802.3 interface(s)
use_candidate_only boolean	Enable/Disable backup selection from candidate-list only Choices: `false` `true`
per_prefix dictionary	Specify per-prefix computation
information_type string	Specify per_prefix LFA exclusion or FRR LFA candidate information Choices: `"exclude"` `"lfa_candidate"`
interface dictionary	Specify Per-link LFA exclusion information
bundle_ether list / elements=integer	Specify Aggregated Ethernet interface(s)
bvi list / elements=integer	Specify Bridge-Group Virtual Interface
fast_ethernet list / elements=string	Specify FastEthernet/IEEE 802.3 interface(s)
fiftygige list / elements=string	Specify FiftyGigE/IEEE 802.3 interface(s)
fortygige list / elements=string	Specify FortyGigE/IEEE 802.3 interface(s)
fourhundredgige list / elements=string	Specify FourHundredGigE/IEEE 802.3 interface(s)
gigabitethernet list / elements=string	Specify GigabitEthernet/IEEE 802.3 interface(s)
hundredgige list / elements=string	Specify HundredGigE/IEEE 802.3 interface(s)
mgmteth list / elements=string	Specify MgmtEth/IEEE 802.3 interface(s)
multilink list / elements=string	Specify Multilink network interface(s)
nve list / elements=integer	Specify Network Virtualization Endpoint Interface(s)
pos_int list / elements=integer	Specify Aggregated pos interface(s)
pw_ether list / elements=integer	Specify PWHE Ethernet Interface
pw_iw list / elements=integer	Specify PWHE VC11 IP Interworking Interface
serial list / elements=string	Specify Serial network interface(s)
srp list / elements=string	Specify SRP interface(s)
tengige list / elements=string	Specify TenGigabitEthernet/IEEE 802.3 interface(s)
tunnel_ip list / elements=integer	Specify GRE/IPinIP Tunnel Interface(s)
tunnel_ipsec list / elements=integer	Specify IPSec Tunnel interface(s)
tunnel_mpls integer	MPLS Transport Protocol Tunnel interface
tunnel_mte list / elements=integer	Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
twentyfivegige list / elements=string	Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
twohundredgige list / elements=string	Specify TwoHundredGigE/IEEE 802.3 interface(s)
use_candidate_only boolean	Enable/Disable backup selection from candidate-list only Choices: `false` `true`
flood_reduction boolean	Enable/Disable flood reduction Choices: `false` `true`
hello_interval integer	Specify Time between HELLO packets
instance_id integer	Specify instance ID
mpls_ldp_sync boolean	Enable/Disable MPLS LDP Sync Choices: `false` `true`
mtu_ignore boolean	Enable/Disable ignoring of MTU in DBD packets Choices: `false` `true`
network string	Specify Network type Choices: `"broadcast"` `"non-broadcast"` `"point-to-multipoint"` `"point-to-point"`
nssa dictionary	NSSA settings for the area
default_information_originate dictionary	Originate default Type 7 LSA
metric integer	ospfv3 default metric
metric_type integer	Metric type for default routes
set boolean	Set nssa to default information originate Choices: `false` `true`
no_redistribution boolean	Do not send redistributed LSAs into NSSA area Choices: `false` `true`
no_summary boolean	Do not send summary LSAs into NSSA area Choices: `false` `true`
set boolean	Configure area as NSSA Choices: `false` `true`
translate dictionary	Translate LSA
type7 dictionary	Translate from Type 7 to Type 5
always boolean / required	Always translate LSAs Choices: `false` `true`
packet_size integer	Specify limit size of OSPFv3 packets
passive boolean	Enable/Disable routing updates on an interface Choices: `false` `true`
prefix_suppression boolean	Hide all transit addresses on this interface Choices: `false` `true`
priority integer	Specify Router priority
ranges list / elements=dictionary	Summarize routes matching address/mask (border routers only)
address string / required	IP in Prefix format (X:X::X/length)
advertise boolean	Advertise this range (default) Choices: `false` `true`
cost integer	Specify user specified metric for this range
not_advertise boolean	DoNotAdvertise this range Choices: `false` `true`
retransmit_interval integer	Specify Delay between LSA retransmissions
stub dictionary	Settings for configuring the area as a stub
no_summary boolean	Do not send summary LSA into stub area Choices: `false` `true`
set boolean	Configure the area as a stub Choices: `false` `true`
transmit_delay integer	Specify estimated time needed to send link-state update packet
virtual_link list / elements=dictionary	Define a virtual link
authentication dictionary	Enable authentication
disable boolean	Do not authenticate OSPFv3 packets Choices: `false` ← (default) `true`
ipsec dictionary	Specify IPSec AH authentication attributes
algorithim_type string	Specify the type of algorithim Choices: `"md5"` `"sha1"`
clear_key string	Specify key in cleartext form
key string	Specify key
password_key string	Specify key in encrypted form
spi integer	Specify the Security Parameter Index value
dead_interval integer	Interval after which a neighbor is declared dead
encryption dictionary	Encrypt and authenticate OSPFv3 packets
disable boolean	Do not encrypt OSPFv3 packets Choices: `false` ← (default) `true`
ipsec dictionary	Specify IPSec ESP encryption and authentication
esp dictionary	Specify encryption parameters
aes dictionary	This specify the aes algorithim
algorithim_type string	Specify the bit encryption for aes algorithim Choices: `"192"` `"256"`
clear_key string	Specify AES key in cleartext form
key string	Cleartext AES key
password_key string	Specify AES key in encrypted form
des dictionary	This specify the des algorithim
clear_key string	Specify AES key in cleartext form
key string	Cleartext AES key
password_key string	Specify AES key in encrypted form
null_encryption dictionary	Specify null encryption attributes
authentication dictionary	Specify authentication parameters
algorithim_type string	Specify the type of algorithim Choices: `"md5"` `"sha1"`
clear_key string	Specify key in cleartext form
key string	Specify key
password_key string	Specify key in encrypted form
triple_des dictionary	This specify the triple DES algorithim
clear_key string	Specify 3DES key in cleartext form
key string	Cleartext 3DES key
password_key string	Specify 3DES key in encrypted form
spi integer	Specify the Security Parameter Index value
hello_interval integer	Time between HELLO packets
id string / required	Router-ID of virtual link neighbor (A.B.C.D)
retransmit_interval integer	Delay between LSA retransmissions
transmit_delay integer	Link state transmit delay
authentication dictionary	Enable authentication
disable boolean	Do not authenticate OSPFv3 packets Choices: `false` ← (default) `true`
ipsec dictionary	Specify IPSec AH authentication attributes
algorithim_type string	Specify the type of algorithim Choices: `"md5"` `"sha1"`
clear_key string	Specify key in cleartext form
key string	Specify key
password_key string	Specify key in encrypted form
spi integer	Specify the Security Parameter Index value
auto_cost dictionary	Calculate ospfv3 interface cost according to bandwidth
disable boolean	Assign ospfv3 cost based on interface type Choices: `false` `true`
reference_bandwidth integer	Specify reference bandwidth in megabits per sec
bfd dictionary	Configure BFD parameters
fast_detect dictionary	Configure fast detection
set boolean	Enable fast detection only Choices: `false` `true`
strict_mode boolean	Hold down neighbor session until BFD session is up Choices: `false` `true`
minimum_interval integer	Hello interval in milli-seconds
multiplier integer	Detect multiplier
capability dictionary	Enable specific OSPFv3 feature
type7 dictionary	Specify type7 nssa capability
prefer boolean	Prefer type7 externals over type5 Choices: `false` `true`
translate boolean	Translate type7 to type5 Choices: `false` `true`
cost integer	Specify Interface cost
database_filter dictionary	Filter LSAs during synchronization and flooding
all_outgoing_lsa boolean	Filter all outgoing LSA Choices: `false` `true`
dead_interval integer	Interval after which a neighbor is declared dead
default_information_originate dictionary	Control distribution of default information
always boolean	Always advertise default route Choices: `false` `true`
metric integer	ospfv3 default metric
metric_type integer	ospfv3 metric type for default routes
route_policy string	Apply route-policy to default-information origination
set boolean	Enable distribution of default route Choices: `false` `true`
tag integer	Set tag for default route
default_metric integer	Set metric of redistributed routes
demand_circuit boolean	Enable/Disable ospfv3 demand circuit Choices: `false` `true`
distance dictionary	Define an administrative distance
admin_distance integer	Administrative distance
ospfv3_distance dictionary	ospfv3 administrative distance
external integer	Distance for external routes
inter_area integer	Distance for inter-area routes
intra_area integer	Distance for intra-area routes
distribute_list dictionary	Filter prefixes to/from RIB
prefix_list list / elements=string	Filter prefixes based on an IPv6 prefix-list
in boolean	Filter prefixes installed to RIB Choices: `false` `true`
name string	Specify Prefix-list name
out boolean	Filter prefixes redistributed from RIB Choices: `false` `true`
encryption dictionary	Encrypt and authenticate OSPFv3 packets
disable boolean	Do not encrypt OSPFv3 packets Choices: `false` ← (default) `true`
ipsec dictionary	Specify IPSec ESP encryption and authentication
esp dictionary	Specify encryption parameters
aes dictionary	This specify the aes algorithim
algorithim_type string	Specify the bit encryption for aes algorithim Choices: `"192"` `"256"`
clear_key string	Specify AES key in cleartext form
key string	Cleartext AES key
password_key string	Specify AES key in encrypted form
des dictionary	This specify the des algorithim
clear_key string	Specify AES key in cleartext form
key string	Cleartext AES key
password_key string	Specify AES key in encrypted form
null_encryption dictionary	Specify null encryption attributes
authentication dictionary	Specify authentication parameters
algorithim_type string	Specify the type of algorithim Choices: `"md5"` `"sha1"`
clear_key string	Specify key in cleartext form
key string	Specify key
password_key string	Specify key in encrypted form
triple_des dictionary	This specify the triple DES algorithim
clear_key string	Specify 3DES key in cleartext form
key string	Cleartext 3DES key
password_key string	Specify 3DES key in encrypted form
spi integer	Specify the Security Parameter Index value
fast_reroute dictionary	Specify IP Fast Reroute
disabled boolean	Disable IP fast reroute Choices: `false` `true`
per_link dictionary	Specify per-prefix computation
information_type string	Specify per-link LFA exclusion or FRR LFA candidate information Choices: `"exclude"` `"lfa_candidate"`
interface dictionary	Specify Per-link LFA exclusion information
bundle_ether list / elements=integer	Specify Aggregated Ethernet interface(s)
bvi list / elements=integer	Specify Bridge-Group Virtual Interface
fast_ethernet list / elements=string	Specify FastEthernet/IEEE 802.3 interface(s)
fiftygige list / elements=string	Specify FiftyGigE/IEEE 802.3 interface(s)
fortygige list / elements=string	Specify FortyGigE/IEEE 802.3 interface(s)
fourhundredgige list / elements=string	Specify FourHundredGigE/IEEE 802.3 interface(s)
gigabitethernet list / elements=string	Specify GigabitEthernet/IEEE 802.3 interface(s)
hundredgige list / elements=string	Specify HundredGigE/IEEE 802.3 interface(s)
mgmteth list / elements=string	Specify MgmtEth/IEEE 802.3 interface(s)
multilink list / elements=string	Specify Multilink network interface(s)
nve list / elements=integer	Specify Network Virtualization Endpoint Interface(s)
pos_int list / elements=integer	Specify Aggregated pos interface(s)
pw_ether list / elements=integer	Specify PWHE Ethernet Interface
pw_iw list / elements=integer	Specify PWHE VC11 IP Interworking Interface
serial list / elements=string	Specify Serial network interface(s)
srp list / elements=string	Specify SRP interface(s)
tengige list / elements=string	Specify TenGigabitEthernet/IEEE 802.3 interface(s)
tunnel_ip list / elements=integer	Specify GRE/IPinIP Tunnel Interface(s)
tunnel_ipsec list / elements=integer	Specify IPSec Tunnel interface(s)
tunnel_mpls integer	MPLS Transport Protocol Tunnel interface
tunnel_mte list / elements=integer	Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
twentyfivegige list / elements=string	Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
twohundredgige list / elements=string	Specify TwoHundredGigE/IEEE 802.3 interface(s)
use_candidate_only boolean	Enable/Disable backup selection from candidate-list only Choices: `false` `true`
per_prefix dictionary	Specify per-prefix computation
information_type string	Specify per_prefix LFA exclusion or FRR LFA candidate information Choices: `"exclude"` `"lfa_candidate"`
interface dictionary	Specify Per-link LFA exclusion information
bundle_ether list / elements=integer	Specify Aggregated Ethernet interface(s)
bvi list / elements=integer	Specify Bridge-Group Virtual Interface
fast_ethernet list / elements=string	Specify FastEthernet/IEEE 802.3 interface(s)
fiftygige list / elements=string	Specify FiftyGigE/IEEE 802.3 interface(s)
fortygige list / elements=string	Specify FortyGigE/IEEE 802.3 interface(s)
fourhundredgige list / elements=string	Specify FourHundredGigE/IEEE 802.3 interface(s)
gigabitethernet list / elements=string	Specify GigabitEthernet/IEEE 802.3 interface(s)
hundredgige list / elements=string	Specify HundredGigE/IEEE 802.3 interface(s)
mgmteth list / elements=string	Specify MgmtEth/IEEE 802.3 interface(s)
multilink list / elements=string	Specify Multilink network interface(s)
nve list / elements=integer	Specify Network Virtualization Endpoint Interface(s)
post_int list / elements=integer	Specify Aggregated pos interface(s)
pw_ether list / elements=integer	Specify PWHE Ethernet Interface
pw_iw list / elements=integer	Specify PWHE VC11 IP Interworking Interface
serial list / elements=string	Specify Serial network interface(s)
srp list / elements=string	Specify SRP interface(s)
tengige list / elements=string	Specify TenGigabitEthernet/IEEE 802.3 interface(s)
tunnel_ip list / elements=integer	Specify GRE/IPinIP Tunnel Interface(s)
tunnel_ipsec list / elements=integer	Specify IPSec Tunnel interface(s)
tunnel_mpls integer	MPLS Transport Protocol Tunnel interface
tunnel_mte list / elements=integer	Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
twentyfivegige list / elements=string	Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
twohundredgige list / elements=string	Specify TwoHundredGigE/IEEE 802.3 interface(s)
use_candidate_only boolean	Enable/Disable backup selection from candidate-list only Choices: `false` `true`
flood_reduction boolean	Enable/Disable flood reduction Choices: `false` `true`
graceful_restart dictionary	Enable Graceful-Restart
helper_disable boolean	Disable router’s helper support level Choices: `false` `true`
max_interval integer	Maximum route lifetime following restart
min_interval integer	Minimum interval between Graceful Restarts
set boolean	Set graceful restart Choices: `false` `true`
hello_interval integer	Specify Time between HELLO packets
ignore_mospf_type6_lsa boolean	Ignore MOSPF Type 6 LSA Choices: `false` `true`
instance_id integer	Specify instance ID
log_adjacency_changes dictionary	Log adjacency state changes
detail boolean	Log all state changes Choices: `false` `true`
disable boolean	Disable log adjacency changes Choices: `false` `true`
set boolean	Set log adjacency Choices: `false` `true`
maximum dictionary	Set OSPFv3 limits
interfaces integer	Specify limit for number of interfaces
paths integer	Specify limit for number of paths
redistributed_prefixes integer	Specify limit for number of redistributed prefixes
mpls_ldp_sync boolean	Enable/Disable MPLS LDP Sync Choices: `false` `true`
mtu_ignore boolean	Enable/Disable ignoring of MTU in DBD packets Choices: `false` `true`
network string	Specify Network type Choices: `"broadcast"` `"non-broadcast"` `"point-to-multipoint"` `"point-to-point"`
nsr boolean	Enable/Disable NSR for all VRFs in this process Choices: `false` `true`
packet_size integer	Specify limit size of OSPFv3 packets
passive boolean	Enable/Disable routing updates on an interface Choices: `false` `true`
prefix_suppression boolean	Hide all transit addresses on this interface Choices: `false` `true`
priority integer	Specify Router priority
process_id string / required	The OSPFv3 Process ID
protocol_shutdown boolean	Gracefully shutdown the OSPFv3 protocol Choices: `false` `true`
redistribute dictionary	Redistribute information from another routing Protocol
application list / elements=dictionary	Specify application routes
id string / required	OnePK Application name
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set application route Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
bgp list / elements=dictionary	Specify bgp routes
id integer / required	BGP process name
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
preserved_med string	Specify preserve med of BGP routes
route_policy string	Apply route policy to redistribution
set boolean	Set bgp route number Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
connected dictionary	Specify connected routes
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set connected route Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
eigrp list / elements=dictionary	Specify eigrp routes
id integer / required	EIGRP process name
match string	Redistribution of EIGRP routes Choices: `"external"` `"internal"`
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set bgp route number Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
isis list / elements=dictionary	Specify IS-IS routes
id string / required	IS-IS name
level string	Specify IS-IS level routes Choices: `"level-1"` `"level-1-2"` `"level-2"`
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set IS-IS route number Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
mobile dictionary	Specify mobile routes
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set mobile route number Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
ospfv3 list / elements=dictionary	Specify ospfv3 routes
id string / required	OSPFv3 process name
match dictionary	Redistribution of OSPFv3 routes
external integer	Redistribute OSPFv3 external routes Choices: `1` `2`
internal boolean	Redistribute OSPFv3 internal routes Choices: `false` `true`
nssa_external integer	Redistribute NSSA OSPFv3 external routes Choices: `1` `2`
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set ospfv3 route number Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
static dictionary	Specify static routes
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set static route Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
subscriber dictionary	Specify subscriber routes
metric integer	Specify metric for redistributed routes
metric_type integer	Specify OSPFv3 exterior metric type for redistributed routes
route_policy string	Apply route policy to redistribution
set boolean	Set static route Choices: `false` `true`
tag integer	Set tag for routes redistributed into OSPFv3
retransmit_interval integer	Delay between LSA retransmissions
router_id string	ospfv3 router-id in IPv4 address format (A.B.C.D)
spf_prefix_priority dictionary	Specify SPF configuration
disable boolean	Disable SPF prefix priority Choices: `false` `true`
route_policy list / elements=dictionary	Specify the route-policy to prioritize route install
name string	Specify name of the policy
value string	Specify parameter values for the policy ()
stub_router dictionary	Enter stub router configuration submode
router_lsa dictionary	Modify self originated router LSAs
advertise_with string	Advertise LSAs with specified type Choices: `"max-metric"` `"r-bit"` `"v6-bit"`
always boolean	Force ospfv3 stub router mode unconditionally Choices: `false` `true`
external_lsa dictionary	Override External LSA metric in stub router mode
metric integer	Metric to use while in stub router mode
set boolean	Set external lsa Choices: `false` `true`
include_stub boolean	Set maximum metric for stub links in stub router mode Choices: `false` `true`
on_proc_migration integer	Enter stub router mode on ospfv3 process migration
on_proc_restart integer	Enter stub router mode on ospfv3 process restart
on_startup dictionary	Enter stub router mode on startup
time integer	Time in seconds to stay in stub router mode
wait_for_bgp boolean	Exit stub router mode when BGP converges Choices: `false` `true`
on_switchover integer	Enter stub router mode on RP switchover
summary_lsa dictionary	Override Summary LSA metric in stub router mode
metric integer	Metric to use while in stub router mode
set boolean	Enable summary LSA Choices: `false` `true`
summary_prefix list / elements=dictionary	Configure IP address summaries
not_advertise boolean	Suppress routes that match the specified prefix/mask pair Choices: `false` `true`
prefix string / required	IP summary address/mask (A.B.C.D/prefix)
tag integer	Set tag
timers dictionary	Adjust routing timers
lsa_arrival integer	Specify LSA arrival timers
pacing dictionary	Specify pacing timers
flood integer	Flood pacing timer
lsa_group integer	LSA group pacing timer
retransmission integer	LSA group pacing timer
throttle dictionary	Adjust throttle timers
lsa dictionary	Specify LSA throttle timers
all_lsa_initial integer	Delay to generate first occurrence of LSA in milliseconds
all_lsa_minimum integer	Minimum delay between originating the same LSA in milliseconds
spf dictionary	Specify SPF throttle timers
spf_initial integer	Delay to generate first occurrence of SPF in ms
spf_minimum integer	Minimum delay between originating the same SPF in ms
trace dictionary	Specify OSPF tracing options
size string	Delete existing buffer and create one with N entries
value integer	Specify trace entry
transmit_delay integer	Estimated time needed to send link-state update packet
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config router ospfv3. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

This module works with connection network_cli. See the IOS-XR Platform Options

Examples 

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# Thu Jun 11 15:54:44.569 UTC
# % No such configuration item(s)
#

- name: Merge provided OSPFv3 configuration with the existing configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: 2.2.2.2
          demand_circuit: true
          mtu_ignore: true
    state: merged

#
# Task Output:
# ------------
#
# before: {}
#
# - router ospfv3 10
#   - area 11 default-cost 5
#   - area 11 cost 11
#   - area 22 default-cost 6
#   - router ospfv3 26
#   - authentication disable
#   - router ospfv3 27
#   - area 10 hello-interval 2
#   - router ospfv3 30
#   - cost 2
#   - priority 1
#   - default-metric 10
#   - router-id 2.2.2.2
#   - demand-circuit
#   - packet-size 577
#   - transmit-delay 2
#   - dead-interval 2
#   - hello-interval 1
#   - retransmit-interval 2
#   - mtu-ignore
#   - area 11 default-cost 5
#   - area 22 default-cost 6
#
# after:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         hello_interval: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

# Using replaced
#
# Before state:
# -------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Replace OSPFv3 routes configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
            - area_id: 20
              cost: 2
              default_cost: 2
        - process_id: 26
          authentication:
            disable: true
    state: replaced

#
# Task Output:
# ------------
#
# before:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         hello_interval: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
# commands:
#   - router ospfv3 27
#   - area 20 default-cost 2
#   - area 20 cost 2
#
# after:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         hello_interval: 2
#       - area_id: '20'
#         cost: 2
#         default_cost: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:anton(config)#do show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

# Using overridden
#
# Before state:
# -------------
#
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Override existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
            - area_id: 20
              cost: 2
              default_cost: 2
              authentication:
                disable: true
        - process_id: 26
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
    state: overridden

#
# Task Output:
# ------------
#
# before:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         hello_interval: 2
#       - area_id: '20'
#         cost: 2
#         default_cost: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
# commands:
#   - router ospfv3 10
#   - no area 11 default-cost 5
#   - no area 11 cost 11
#   - no area 22 default-cost 6
#   - router ospfv3 30
#   - no cost 2
#   - no priority 1
#   - no default-metric 10
#   - no router-id 2.2.2.2
#   - no demand-circuit
#   - no packet-size 577
#   - no transmit-delay 2
#   - no dead-interval 2
#   - no hello-interval 1
#   - no retransmit-interval 2
#   - no mtu-ignore
#   - no area 11 default-cost 5
#   - no area 22 default-cost 6
#   - router ospfv3 27
#   - area 10 authentication disable
#   - area 20 authentication disable
#   - router ospfv3 26
#   - no authentication disable
#   - area 10 authentication disable
#   - area 10 hello-interval 2
#
# after:
#     processes:
#     - process_id: '10'
#     - areas:
#       - area_id: '10'
#         authentication:
#           disable: true
#         hello_interval: 2
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         authentication:
#           disable: true
#         hello_interval: 2
#       - area_id: '20'
#         authentication:
#           disable: true
#         cost: 2
#         default_cost: 2
#       process_id: '27'
#     - process_id: '30'
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  area 10
#   authentication disable
#   hello-interval 2
#  !
# !
# router ospfv3 27
#  area 10
#   authentication disable
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   authentication disable
#   default-cost 2
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !

# Using deleted
#
# Before state:
# -------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   authentication disable
#   hello-interval 2
#  !
# !
# router ospfv3 27
#  area 10
#   authentication disable
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   authentication disable
#   default-cost 2
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Deleted existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: '10'
        - process_id: '26'
        - process_id: '27'
        - process_id: '30'
    state: deleted


#
# Task Output:
# ------------
#
# before:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - areas:
#       - area_id: '10'
#         authentication:
#           disable: true
#         hello_interval: 2
#       authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         authentication:
#           disable: true
#         hello_interval: 2
#       - area_id: '20'
#         authentication:
#           disable: true
#         cost: 2
#         default_cost: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
# commands:
#   - router ospfv3 10
#   - no area 11 default-cost 5
#   - no area 11 cost 11
#   - no area 22 default-cost 6
#   - router ospfv3 26
#   - no authentication disable
#   - no area 10 authentication disable
#   - no area 10 hello-interval 2
#   - router ospfv3 27
#   - no area 10 authentication disable
#   - no area 10 hello-interval 2
#   - no area 20 authentication disable
#   - no area 20 default-cost 2
#   - no area 20 cost 2
#   - router ospfv3 30
#   - no cost 2
#   - no priority 1
#   - no default-metric 10
#   - no router-id 2.2.2.2
#   - no demand-circuit
#   - no packet-size 577
#   - no transmit-delay 2
#   - no dead-interval 2
#   - no hello-interval 1
#   - no retransmit-interval 2
#   - no mtu-ignore
#   - no area 11 default-cost 5
#   - no area 22 default-cost 6
#
# after:
#     processes:
#     - process_id: '10'
#     - process_id: '26'
#     - process_id: '27'
#     - process_id: '30'
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:anton(config)#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  area 10
#  !
# !
# router ospfv3 27
#  area 10
#  !
#  area 20
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !

# Using deleted
#
# Before state:
# -------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   authentication disable
#   hello-interval 2
#  !
# !
# router ospfv3 27
#  area 10
#   authentication disable
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   authentication disable
#   default-cost 2
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Deleted existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
    state: deleted

#
# Task Output:
# ------------
#
# before:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - areas:
#       - area_id: '10'
#         authentication:
#           disable: true
#         hello_interval: 2
#       authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         authentication:
#           disable: true
#         hello_interval: 2
#       - area_id: '20'
#         authentication:
#           disable: true
#         cost: 2
#         default_cost: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
# commands:
#   - router ospfv3 10
#   - no area 11 default-cost 5
#   - no area 11 cost 11
#   - no area 22 default-cost 6
#   - router ospfv3 26
#   - no authentication disable
#   - no area 10 authentication disable
#   - no area 10 hello-interval 2
#   - router ospfv3 27
#   - no area 10 authentication disable
#   - no area 10 hello-interval 2
#   - no area 20 authentication disable
#   - no area 20 default-cost 2
#   - no area 20 cost 2
#   - router ospfv3 30
#   - no cost 2
#   - no priority 1
#   - no default-metric 10
#   - no router-id 2.2.2.2
#   - no demand-circuit
#   - no packet-size 577
#   - no transmit-delay 2
#   - no dead-interval 2
#   - no hello-interval 1
#   - no retransmit-interval 2
#   - no mtu-ignore
#   - no area 11 default-cost 5
#   - no area 22 default-cost 6
#
# after:
#     processes:
#     - process_id: '10'
#     - process_id: '26'
#     - process_id: '27'
#     - process_id: '30'
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:anton(config)#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  area 10
#  !
# !
# router ospfv3 27
#  area 10
#  !
#  area 20
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !


# Using parsed
#
# parsed.cfg
# ------------
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
# !
# router ospfv3 30
#  router-id 2.2.2.2
#  cost 2
#  packet-size 577
#  priority 1
#  mtu-ignore
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospfv3:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# Task Output:
# ------------
#
# parsed:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         hello_interval: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#
# Using rendered
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: rendered

#
#
# Task Output:
# ------------
#
# rendered:
#   - router ospfv3 27
#   - area 10 hello-interval 2
#   - router ospfv3 26
#   - authentication disable
#   - router ospfv3 10
#   - area 11 default-cost 5
#   - area 11 cost 11
#   - area 22 default-cost 6
#   - router ospfv3 30
#   - cost 2
#   - priority 1
#   - default-metric 10
#   - router-id 2.2.2.2
#   - demand-circuit
#   - packet-size 577
#   - transmit-delay 2
#   - dead-interval 2
#   - hello-interval 1
#   - retransmit-interval 2
#   - mtu-ignore
#   - area 11 default-cost 5
#   - area 22 default-cost 6


# Using gathered
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Gather ospfv3 routes configuration
  cisco.iosxr.iosxr_ospfv3:
    state: gathered
#
#
# Task Output:
# ------------
#
# gathered:
#     processes:
#     - areas:
#       - area_id: '11'
#         cost: 11
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       process_id: '10'
#     - authentication:
#         disable: true
#       process_id: '26'
#     - areas:
#       - area_id: '10'
#         hello_interval: 2
#       process_id: '27'
#     - areas:
#       - area_id: '11'
#         default_cost: 5
#       - area_id: '22'
#         default_cost: 6
#       cost: 2
#       dead_interval: 2
#       default_metric: 10
#       demand_circuit: true
#       hello_interval: 1
#       mtu_ignore: true
#       packet_size: 577
#       priority: 1
#       process_id: '30'
#       retransmit_interval: 2
#       router_id: 2.2.2.2
#       transmit_delay: 2
#

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration prior to the model invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["router ospfv3 10", "area 11 default-cost 5", "area 11 cost 11", "area 22 default-cost 6"]`
gathered dictionary	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `"This output will always be in the same format as the module argspec.\n"`
parsed dictionary	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `"This output will always be in the same format as the module argspec.\n"`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["router ospfv3 27", "area 10 hello-interval 2"]`

Authors

Rohit Thakur (@rohitthakur2590)

cisco.iosxr.iosxr_ospfv3 module – Resource module to configure OSPFv3.

Synopsis

Parameters

Notes

Examples

Return Values