cisco.ise.radius_server_sequence module – Resource module for RADIUS Server Sequence

Note

This module is part of the cisco.ise collection (version 2.9.5).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.ise.radius_server_sequence.

New in cisco.ise 1.0.0

Synopsis 

Manage operations create, update and delete of the resource RADIUS Server Sequence.
This API creates a RADIUS server sequence.
This API deletes a RADIUS server sequence.
This API allows the client to update a RADIUS server sequence.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ciscoisesdk >= 2.2.3
python >= 3.5

Parameters 

Parameter	Comments
BeforeAcceptAttrManipulatorsList list / elements=dictionary	The beforeAcceptAttrManipulators is required only if useAttrSetBeforeAcc is true.
action string	Allowed Values - ADD, - UPDATE, - REMOVE, - REMOVEANY.
attributeName string	RADIUS Server Sequence’s attributeName.
changedVal string	The changedVal is required only if the action equals to ‘UPDATE’.
dictionaryName string	RADIUS Server Sequence’s dictionaryName.
value string	RADIUS Server Sequence’s value.
continueAuthorzPolicy boolean	ContinueAuthorzPolicy flag. Choices: `false` `true`
description string	RADIUS Server Sequence’s description.
id string	RADIUS Server Sequence’s id.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: `false` ← (default) `true`
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_single_request_timeout integer added in cisco.ise 3.0.0	Timeout (in seconds) for RESTful HTTP requests. Default: `60`
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in cisco.ise 1.1.0	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: `false` `true` ← (default)
ise_uses_csrf_token boolean added in cisco.ise 3.0.0	Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices: `false` ← (default) `true`
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: `false` `true` ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: `"3.1_Patch_1"`
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: `false` `true` ← (default)
localAccounting boolean	LocalAccounting flag. Choices: `false` `true`
name string	RADIUS Server Sequence’s name.
OnRequestAttrManipulatorList list / elements=dictionary	The onRequestAttrManipulators is required only if useAttrSetOnRequest is true.
action string	Allowed Values - ADD, - UPDATE, - REMOVE, - REMOVEANY.
attributeName string	RADIUS Server Sequence’s attributeName.
changedVal string	The changedVal is required only if the action equals to ‘UPDATE’.
dictionaryName string	RADIUS Server Sequence’s dictionaryName.
value string	RADIUS Server Sequence’s value.
prefixSeparator string	The prefixSeparator is required only if stripPrefix is true. The maximum length is 1 character.
RADIUSServerList list / elements=string	RADIUS Server Sequence’s RADIUSServerList.
remoteAccounting boolean	RemoteAccounting flag. Choices: `false` `true`
stripPrefix boolean	StripPrefix flag. Choices: `false` `true`
stripSuffix boolean	StripSuffix flag. Choices: `false` `true`
suffixSeparator string	The suffixSeparator is required only if stripSuffix is true. The maximum length is 1 character.
useAttrSetBeforeAcc boolean	UseAttrSetBeforeAcc flag. Choices: `false` `true`
useAttrSetOnRequest boolean	UseAttrSetOnRequest flag. Choices: `false` `true`

Notes 

Note

SDK Method used are radius_server_sequence.RadiusServerSequence.create_radius_server_sequence, radius_server_sequence.RadiusServerSequence.delete_radius_server_sequence_by_id, radius_server_sequence.RadiusServerSequence.update_radius_server_sequence_by_id,
Paths used are post /ers/config/radiusserversequence, delete /ers/config/radiusserversequence/{id}, put /ers/config/radiusserversequence/{id},
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples 

- name: Update by id
  cisco.ise.radius_server_sequence:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    BeforeAcceptAttrManipulatorsList:
    - action: string
      attributeName: string
      changedVal: string
      dictionaryName: string
      value: string
    OnRequestAttrManipulatorList:
    - action: string
      attributeName: string
      changedVal: string
      dictionaryName: string
      value: string
    RadiusServerList:
    - string
    continueAuthorzPolicy: true
    description: string
    id: string
    localAccounting: true
    name: string
    prefixSeparator: string
    remoteAccounting: true
    stripPrefix: true
    stripSuffix: true
    suffixSeparator: string
    useAttrSetBeforeAcc: true
    useAttrSetOnRequest: true

- name: Delete by id
  cisco.ise.radius_server_sequence:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string

- name: Create
  cisco.ise.radius_server_sequence:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    BeforeAcceptAttrManipulatorsList:
    - action: string
      attributeName: string
      changedVal: string
      dictionaryName: string
      value: string
    OnRequestAttrManipulatorList:
    - action: string
      attributeName: string
      changedVal: string
      dictionaryName: string
      value: string
    RadiusServerList:
    - string
    continueAuthorzPolicy: true
    description: string
    localAccounting: true
    name: string
    prefixSeparator: string
    remoteAccounting: true
    stripPrefix: true
    stripSuffix: true
    suffixSeparator: string
    useAttrSetBeforeAcc: true
    useAttrSetOnRequest: true

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key

Description

ise_response

dictionary

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: {"BeforeAcceptAttrManipulatorsList": [{"action": "string", "attributeName": "string", "changedVal": "string", "dictionaryName": "string", "value": "string"}], "OnRequestAttrManipulatorList": [{"action": "string", "attributeName": "string", "changedVal": "string", "dictionaryName": "string", "value": "string"}], "RadiusServerList": ["string"], "continueAuthorzPolicy": true, "description": "string", "id": "string", "link": {"href": "string", "rel": "string", "type": "string"}, "localAccounting": true, "name": "string", "prefixSeparator": "string", "remoteAccounting": true, "stripPrefix": true, "stripSuffix": true, "suffixSeparator": "string", "useAttrSetBeforeAcc": true, "useAttrSetOnRequest": true}

ise_update_response

dictionary

added in cisco.ise 1.1.0

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: {"UpdatedFieldsList": {"field": "string", "newValue": "string", "oldValue": "string", "updatedField": [{"field": "string", "newValue": "string", "oldValue": "string"}]}}

Authors

Rafael Campos (@racampos)

cisco.ise.radius_server_sequence module – Resource module for RADIUS Server Sequence

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 