cisco.meraki.meraki_mr_rf_profile module – Manage RF profiles for Meraki wireless networks

Note

This module is part of the cisco.meraki collection (version 2.20.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.meraki.

To use it in a playbook, specify: cisco.meraki.meraki_mr_rf_profile.

DEPRECATED

Removed in:

version 3.0.0

Why:

Updated modules released with increased functionality

Alternative:

cisco.meraki.networks_wireless_rf_profiles

Synopsis

• Allows for configuration of radio frequency (RF) profiles in Meraki MR wireless networks.

Parameters

Parameter	Comments
ap_band_settings dictionary	Settings that will be enabled if selectionType is set to ‘ap’.
band_steering_enabled boolean	Steers client to most open band. Choices: false true
mode aliases: band_operation_mode string	Sets which RF band the AP will support. Choices: "2.4ghz" "5ghz" "dual"
auth_key string / required	Authentication key provided by the dashboard. Required if environmental variable MERAKI_KEY is not set.
band_selection_type string	Sets whether band selection is assigned per access point or SSID. This param is required on creation. Choices: "ssid" "ap"
client_balancing_enabled boolean	Steers client to best available access point. Choices: false true
five_ghz_settings dictionary	Settings related to 5Ghz band.
channel_width string	Sets channel width (MHz) for 5Ghz band. Choices: "auto" "20" "40" "80"
max_power integer	Sets max power (dBm) of 5Ghz band. Can be integer between 8 and 30.
min_bitrate integer	Sets minimum bitrate (Mbps) of 5Ghz band. Choices: 6 9 12 18 24 36 48 54
min_power integer	Sets minmimum power (dBm) of 5Ghz band. Can be integer between 8 and 30.
rxsop integer	The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm).
valid_auto_channels list / elements=integer	Sets valid auto channels for 5Ghz band. Choices: 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165
host string	Hostname for Meraki dashboard. Can be used to access regional Meraki environments, such as China. Default: "api.meraki.com"
internal_error_retry_time integer	Number of seconds to retry if server returns an internal server error. Default: 60
min_bitrate_type string	Type of minimum bitrate. Choices: "band" "ssid"
name string	The unique name of the new profile. This param is required on creation.
net_id string	ID of network.
net_name string	Name of network.
org_id string	ID of organization.
org_name aliases: organization string	Name of organization.
output_format string	Instructs module whether response keys should be snake case (ex. net_id) or camel case (ex. netId). Choices: "snakecase" ← (default) "camelcase"
output_level string	Set amount of debug output during module execution. Choices: "debug" "normal" ← (default)
profile_id aliases: id string	Unique identifier of existing RF profile.
rate_limit_retry_time integer	Number of seconds to retry if rate limiter is triggered. Default: 165
state string	Query, edit, or delete wireless RF profile settings. Choices: "present" ← (default) "query" "absent"
timeout integer	Time to timeout for HTTP requests. Default: 30
two_four_ghz_settings dictionary	Settings related to 2.4Ghz band
ax_enabled boolean	Determines whether ax radio on 2.4Ghz band is on or off. Choices: false true
max_power integer	Sets max power (dBm) of 2.4Ghz band. Can be integer between 5 and 30.
min_bitrate float	Sets minimum bitrate (Mbps) of 2.4Ghz band. Choices: 1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
min_power integer	Sets minmimum power (dBm) of 2.4Ghz band. Can be integer between 5 and 30.
rxsop integer	The RX-SOP level controls the sensitivity of the radio. It is strongly recommended to use RX-SOP only after consulting a wireless expert. RX-SOP can be configured in the range of -65 to -95 (dBm).
valid_auto_channels list / elements=integer	Sets valid auto channels for 2.4Ghz band. Choices: 1 6 11
use_https boolean	If no, it will use HTTP. Otherwise it will use HTTPS. Only useful for internal Meraki developers. Choices: false true ← (default)
use_proxy boolean	If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts. Choices: false ← (default) true
validate_certs boolean	Whether to validate HTTP certificates. Choices: false true ← (default)

Notes

Note

• More information about the Meraki API can be found at https://dashboard.meraki.com/api_docs.

• Some of the options are likely only used for developers within Meraki.

• As of Ansible 2.9, Meraki modules output keys as snake case. To use camel case, set the ANSIBLE_MERAKI_FORMAT environment variable to camelcase.

• Ansible’s Meraki modules will stop supporting camel case output in Ansible 2.13. Please update your playbooks.

• Check Mode downloads the current configuration from the dashboard, then compares changes against this download. Check Mode will report changed if there are differences in the configurations, but does not submit changes to the API for validation of change.

Examples

- name: Create RF profile in check mode
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: present
    name: Test Profile
    band_selection_type: ap
    client_balancing_enabled: True
    ap_band_settings:
        mode: dual
        band_steering_enabled: true
    five_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -65
      channel_width: 20
      valid_auto_channels:
        - 36
        - 40
        - 44
    two_four_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -65
      ax_enabled: false
      valid_auto_channels:
        - 1
  delegate_to: localhost

- name: Query all RF profiles
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: query
  delegate_to: localhost

- name: Query one RF profile by ID
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: query
    profile_id: '{{ profile_id }}'
  delegate_to: localhost

- name: Update profile
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: present
    profile_id: 12345
    band_selection_type: ap
    client_balancing_enabled: True
    ap_band_settings:
        mode: dual
        band_steering_enabled: true
    five_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -65
      channel_width: 20
      valid_auto_channels:
        - 36
        - 44
    two_four_ghz_settings:
      max_power: 10
      min_bitrate: 12
      min_power: 8
      rxsop: -75
      ax_enabled: false
      valid_auto_channels:
        - 1
  delegate_to: localhost

- name: Delete RF profile
  meraki_mr_rf_profile:
    auth_key: abc123
    org_name: YourOrg
    net_name: YourNet
    state: absent
    profile_id: 12345
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
data complex	List of wireless RF profile settings. Returned: success
ap_band_settings complex	Settings that will be enabled if selectionType is set to ‘ap’. Returned: success
band_steering_enabled boolean	Steers client to most open band. Returned: success Sample: true
mode string	Sets which RF band the AP will support. Returned: success Sample: "dual"
band_selection_type string	Sets whether band selection is assigned per access point or SSID. This param is required on creation. Returned: success Sample: "ap"
client_balancing_enabled boolean	Steers client to best available access point. Returned: success Sample: true
five_ghz_settings complex	Settings related to 5Ghz band. Returned: success
channel_width string	Sets channel width (MHz) for 5Ghz band. Returned: success Sample: "auto"
max_power integer	Sets max power (dBm) of 5Ghz band. Can be integer between 8 and 30. Returned: success Sample: 12
min_bitrate integer	Sets minimum bitrate (Mbps) of 5Ghz band. Returned: success Sample: 6
min_power integer	Sets minmimum power (dBm) of 5Ghz band. Can be integer between 8 and 30. Returned: success Sample: 12
rxsop integer	The RX-SOP level controls the sensitivity of the radio. Returned: success Sample: -70
valid_auto_channels list / elements=string	Sets valid auto channels for 5Ghz band. Returned: success
id string	Unique identifier of existing RF profile. Returned: success Sample: "12345"
min_bitrate_type string	Type of minimum bitrate. Returned: success Sample: "ssid"
name string	The unique name of the new profile. This param is required on creation. Returned: success Sample: "Guest RF profile"
two_four_ghz_settings complex	Settings related to 2.4Ghz band Returned: success
ax_enabled boolean	Determines whether ax radio on 2.4Ghz band is on or off. Returned: success Sample: true
max_power integer	Sets max power (dBm) of 2.4Ghz band. Returned: success Sample: 12
min_bitrate float	Sets minimum bitrate (Mbps) of 2.4Ghz band. Returned: success Sample: 5.5
min_power integer	Sets minmimum power (dBm) of 2.4Ghz band. Returned: success Sample: 12
rxsop integer	The RX-SOP level controls the sensitivity of the radio. Returned: success Sample: -70
valid_auto_channels list / elements=string	Sets valid auto channels for 2.4Ghz band. Returned: success Sample: ["6"]

Status

• This module will be removed in version 3.0.0. [deprecated]

• For more information see DEPRECATED.

Authors

• Kevin Breit (@kbreit)

Collection links

• Issue Tracker
• Repository (Sources)