cisco.meraki.networks_switch_stacks_routing_interfaces module – Resource module for networks _switch _stacks _routing _interfaces
Note
This module is part of the cisco.meraki collection (version 2.18.3).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.meraki.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.meraki.networks_switch_stacks_routing_interfaces.
New in cisco.meraki 2.16.0
Synopsis
Manage operations create, update and delete of the resource networks _switch _stacks _routing _interfaces.
Create a layer 3 interface for a switch stack.
Delete a layer 3 interface from a switch stack.
Update a layer 3 interface for a switch stack.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
meraki >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
The next hop for any traffic that isn’t going to a directly connected subnet or over a static route. This IP address must exist in a subnet with a routed interface. |
|
InterfaceId path parameter. Interface ID. |
|
The IP address this switch stack will use for layer 3 routing on this VLAN or subnet. This cannot be the same as the switch’s management IP. |
|
The IPv6 settings of the interface. |
|
The IPv6 address of the interface. Required if assignmentMode is ‘static’. Must not be included if assignmentMode is ‘eui-64’. |
|
The IPv6 assignment mode for the interface. Can be either ‘eui-64’ or ‘static’. |
|
The IPv6 default gateway of the interface. Required if prefix is defined and this is the first interface with IPv6 configured for the stack. |
|
The IPv6 prefix of the interface. Required if IPv6 object is included. |
|
meraki_action_batch_retry_wait_time (integer), action batch concurrency error retry wait time Default: |
|
meraki_api_key (string), API key generated in dashboard; can also be set as an environment variable MERAKI_DASHBOARD_API_KEY |
|
meraki_base_url (string), preceding all endpoint resources Default: |
|
meraki_be_geo_id (string), optional partner identifier for API usage tracking; can also be set as an environment variable BE_GEO_ID Default: |
|
meraki_caller (string), optional identifier for API usage tracking; can also be set as an environment variable MERAKI_PYTHON_SDK_CALLER Default: |
|
meraki_certificate_path (string), path for TLS/SSL certificate verification if behind local proxy Default: |
|
meraki_inherit_logging_config (boolean), Inherits your own logger instance Choices:
|
|
meraki_log_file_prefix (string), log file name appended with date and timestamp Default: |
|
log_path (string), path to output log; by default, working directory of script if not specified Default: |
|
meraki_maximum_retries (integer), retry up to this many times when encountering 429s or other server-side errors Default: |
|
meraki_nginx_429_retry_wait_time (integer), Nginx 429 retry wait time Default: |
|
meraki_output_log (boolean), create an output log file? Choices:
|
|
meraki_print_console (boolean), print logging output to console? Choices:
|
|
meraki_requests_proxy (string), proxy server and port, if needed, for HTTPS Default: |
|
meraki_retry_4xx_error (boolean), retry if encountering other 4XX error (besides 429)? Choices:
|
|
meraki_retry_4xx_error_wait_time (integer), other 4XX error retry wait time Default: |
|
meraki_simulate (boolean), simulate POST/PUT/DELETE calls to prevent changes? Choices:
|
|
meraki_single_request_timeout (integer), maximum number of seconds for each API call Default: |
|
meraki_suppress_logging (boolean), disable all logging? you’re on your own then! Choices:
|
|
meraki_use_iterator_for_get_pages (boolean), list* methods will return an iterator with each object instead of a complete list with all items Choices:
|
|
meraki_wait_on_rate_limit (boolean), retry if 429 rate limit error encountered? Choices:
|
|
Enable multicast support if, multicast routing between VLANs is required. Options are, ‘disabled’, ‘enabled’ or ‘IGMP snooping querier’. Default is ‘disabled’. |
|
A friendly name or description for the interface or VLAN. |
|
NetworkId path parameter. Network ID. |
|
The OSPF routing settings of the interface. |
|
The OSPF area to which this interface should belong. Can be either ‘disabled’ or the identifier of an existing OSPF area. Defaults to ‘disabled’. |
|
The path cost for this interface. Defaults to 1, but can be increased up to 65535 to give lower priority. |
|
When enabled, OSPF will not run on the interface, but the subnet will still be advertised. Choices:
|
|
The network that this routed interface is on, in CIDR notation (ex. 10.1.1.0/24). |
|
SwitchStackId path parameter. Switch stack ID. |
|
The VLAN this routed interface is on. VLAN must be between 1 and 4094. |
Notes
Note
SDK Method used are switch.Switch.create_network_switch_stack_routing_interface, switch.Switch.delete_network_switch_stack_routing_interface, switch.Switch.update_network_switch_stack_routing_interface,
Paths used are post /networks/{networkId}/switch/stacks/{switchStackId}/routing/interfaces, delete /networks/{networkId}/switch/stacks/{switchStackId}/routing/interfaces/{interfaceId}, put /networks/{networkId}/switch/stacks/{switchStackId}/routing/interfaces/{interfaceId},
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco Meraki documentation for switch createNetworkSwitchStackRoutingInterface
Complete reference of the createNetworkSwitchStackRoutingInterface API.
- Cisco Meraki documentation for switch deleteNetworkSwitchStackRoutingInterface
Complete reference of the deleteNetworkSwitchStackRoutingInterface API.
- Cisco Meraki documentation for switch updateNetworkSwitchStackRoutingInterface
Complete reference of the updateNetworkSwitchStackRoutingInterface API.
Examples
- name: Create
cisco.meraki.networks_switch_stacks_routing_interfaces:
meraki_api_key: "{{meraki_api_key}}"
meraki_base_url: "{{meraki_base_url}}"
meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
meraki_certificate_path: "{{meraki_certificate_path}}"
meraki_requests_proxy: "{{meraki_requests_proxy}}"
meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
meraki_maximum_retries: "{{meraki_maximum_retries}}"
meraki_output_log: "{{meraki_output_log}}"
meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
meraki_log_path: "{{meraki_log_path}}"
meraki_print_console: "{{meraki_print_console}}"
meraki_suppress_logging: "{{meraki_suppress_logging}}"
meraki_simulate: "{{meraki_simulate}}"
meraki_be_geo_id: "{{meraki_be_geo_id}}"
meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
state: present
defaultGateway: 192.168.1.1
interfaceIp: 192.168.1.2
ipv6:
address: 1:2:3:4::1
assignmentMode: static
gateway: 1:2:3:4::2
prefix: 1:2:3:4::/48
multicastRouting: disabled
name: L3 interface
networkId: string
ospfSettings:
area: '0'
cost: 1
isPassiveEnabled: true
subnet: 192.168.1.0/24
switchStackId: string
vlanId: 100
- name: Delete by id
cisco.meraki.networks_switch_stacks_routing_interfaces:
meraki_api_key: "{{meraki_api_key}}"
meraki_base_url: "{{meraki_base_url}}"
meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
meraki_certificate_path: "{{meraki_certificate_path}}"
meraki_requests_proxy: "{{meraki_requests_proxy}}"
meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
meraki_maximum_retries: "{{meraki_maximum_retries}}"
meraki_output_log: "{{meraki_output_log}}"
meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
meraki_log_path: "{{meraki_log_path}}"
meraki_print_console: "{{meraki_print_console}}"
meraki_suppress_logging: "{{meraki_suppress_logging}}"
meraki_simulate: "{{meraki_simulate}}"
meraki_be_geo_id: "{{meraki_be_geo_id}}"
meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
state: absent
interfaceId: string
networkId: string
switchStackId: string
- name: Update by id
cisco.meraki.networks_switch_stacks_routing_interfaces:
meraki_api_key: "{{meraki_api_key}}"
meraki_base_url: "{{meraki_base_url}}"
meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
meraki_certificate_path: "{{meraki_certificate_path}}"
meraki_requests_proxy: "{{meraki_requests_proxy}}"
meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
meraki_maximum_retries: "{{meraki_maximum_retries}}"
meraki_output_log: "{{meraki_output_log}}"
meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
meraki_log_path: "{{meraki_log_path}}"
meraki_print_console: "{{meraki_print_console}}"
meraki_suppress_logging: "{{meraki_suppress_logging}}"
meraki_simulate: "{{meraki_simulate}}"
meraki_be_geo_id: "{{meraki_be_geo_id}}"
meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
state: present
defaultGateway: 192.168.1.1
interfaceId: string
interfaceIp: 192.168.1.2
ipv6:
address: 1:2:3:4::1
assignmentMode: static
gateway: 1:2:3:4::2
prefix: 1:2:3:4::/48
multicastRouting: disabled
name: L3 interface
networkId: string
ospfSettings:
area: '0'
cost: 1
isPassiveEnabled: true
subnet: 192.168.1.0/24
switchStackId: string
vlanId: 100
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco Meraki Python SDK Returned: always Sample: |