cisco.nxos.nxos_bgp_neighbor_address_family module – BGP Neighbor Address Family resource module.

Note

This module is part of the cisco.nxos collection (version 9.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bgp_neighbor_address_family.

New in cisco.nxos 2.0.0

Synopsis

  • This module manages BGP Neighbor Address Family configuration on devices running Cisco NX-OS.

Parameters

Parameter

Comments

config

dictionary

BGP Neighbor AF configuration.

as_number

string

Autonomous System Number of the router.

neighbors

list / elements=dictionary

A list of BGP Neighbor AF configuration.

address_family

list / elements=dictionary

BGP Neighbor Address Family related configurations.

advertise_map

dictionary

Specify route-map for conditional advertisement.

exist_map

string

Condition route-map to advertise only when prefix in condition exists.

non_exist_map

string

Condition route-map to advertise only when prefix in condition does not exist.

route_map

string / required

Route-map name.

advertisement_interval

integer

Minimum interval between sending BGP routing updates.

afi

string / required

Address Family indicator.

Choices:

  • "ipv4"

  • "ipv6"

  • "link-state"

  • "vpnv4"

  • "vpnv6"

  • "l2vpn"

allowas_in

dictionary

Accept as-path with my AS present in it.

max_occurences

integer

Number of occurrences of AS number, default is 3.

set

boolean

Activate allowas-in property.

Choices:

  • false

  • true

as_override

boolean

Override matching AS-number while sending update.

Choices:

  • false

  • true

capability

dictionary

Advertise capability to the peer.

additional_paths

dictionary

Additional paths capability.

receive

string

Additional paths Receive capability.

Choices:

  • "enable"

  • "disable"

send

string

Additional paths Send capability.

Choices:

  • "enable"

  • "disable"

default_originate

dictionary

Originate a default toward this peer.

route_map

string

Route-map to specify criteria for originating default.

set

boolean

Set default-originate attribute.

Choices:

  • false

  • true

disable_peer_as_check

boolean

Disable checking of peer AS-number while advertising.

Choices:

  • false

  • true

filter_list

dictionary

Name of filter-list.

inbound

string

Apply policy to incoming routes.

outbound

string

Apply policy to outgoing routes.

inherit

dictionary

Inherit a template.

sequence

integer

Sequence number.

template

string

Template name.

maximum_prefix

dictionary

Maximum number of prefixes from this neighbor.

generate_warning_threshold

integer

Threshold percentage at which to generate a warning.

max_prefix_limit

integer

Maximum prefix limit.

restart_interval

integer

Restart bgp connection after limit is exceeded.

warning_only

boolean

Only give a warning message when limit is exceeded.

Choices:

  • false

  • true

next_hop_self

dictionary

Set our address as nexthop (non-reflected).

all_routes

boolean

Set our address as nexthop for all routes.

Choices:

  • false

  • true

set

boolean

Set next-hop-self attribute.

Choices:

  • false

  • true

next_hop_third_party

boolean

Compute a third-party nexthop if possible.

Choices:

  • false

  • true

prefix_list

dictionary

Apply prefix-list.

inbound

string

Apply policy to incoming routes.

outbound

string

Apply policy to outgoing routes.

rewrite_evpn_rt_asn

boolean

Auto generate RTs for EBGP neighbor.

Choices:

  • false

  • true

rewrite_rt_asn

boolean

Auto generate RTs for EBGP neighbor.

Choices:

  • false

  • true

route_map

dictionary

Apply route-map to neighbor.

inbound

string

Apply policy to incoming routes.

outbound

string

Apply policy to outgoing routes.

route_reflector_client

boolean

Configure a neighbor as Route reflector client.

Choices:

  • false

  • true

safi

string

Sub Address Family indicator.

Choices:

  • "unicast"

  • "multicast"

  • "mvpn"

  • "evpn"

send_community

dictionary

Send Community attribute to this neighbor.

both

boolean

Send Standard and Extended Community attributes.

Choices:

  • false

  • true

extended

boolean

Send Extended Community attribute.

Choices:

  • false

  • true

set

boolean

Set send-community attribute.

Choices:

  • false

  • true

standard

boolean

Send Standard Community attribute.

Choices:

  • false

  • true

soft_reconfiguration_inbound

dictionary

Soft reconfiguration.

always

boolean

Always perform inbound soft reconfiguration.

Choices:

  • false

  • true

set

boolean

Set soft-reconfiguration inbound attribute.

Choices:

  • false

  • true

soo

string

Specify Site-of-origin extcommunity.

suppress_inactive

boolean

Advertise only active routes to peer.

Choices:

  • false

  • true

unsuppress_map

string

Route-map to selectively unsuppress suppressed routes.

weight

integer

Set default weight for routes from this neighbor.

neighbor_address

string / required

IP/IPv6 address of the neighbor.

vrfs

list / elements=dictionary

Virtual Router Context.

neighbors

list / elements=dictionary

A list of BGP Neighbor AF configuration.

address_family

list / elements=dictionary

BGP Neighbor Address Family related configurations.

advertise_map

dictionary

Specify route-map for conditional advertisement.

exist_map

string

Condition route-map to advertise only when prefix in condition exists.

non_exist_map

string

Condition route-map to advertise only when prefix in condition does not exist.

route_map

string / required

Route-map name.

advertisement_interval

integer

Minimum interval between sending BGP routing updates.

afi

string / required

Address Family indicator.

Choices:

  • "ipv4"

  • "ipv6"

  • "link-state"

  • "vpnv4"

  • "vpnv6"

  • "l2vpn"

allowas_in

dictionary

Accept as-path with my AS present in it.

max_occurences

integer

Number of occurrences of AS number, default is 3.

set

boolean

Activate allowas-in property.

Choices:

  • false

  • true

as_override

boolean

Override matching AS-number while sending update.

Choices:

  • false

  • true

capability

dictionary

Advertise capability to the peer.

additional_paths

dictionary

Additional paths capability.

receive

string

Additional paths Receive capability.

Choices:

  • "enable"

  • "disable"

send

string

Additional paths Send capability.

Choices:

  • "enable"

  • "disable"

default_originate

dictionary

Originate a default toward this peer.

route_map

string

Route-map to specify criteria for originating default.

set

boolean

Set default-originate attribute.

Choices:

  • false

  • true

disable_peer_as_check

boolean

Disable checking of peer AS-number while advertising.

Choices:

  • false

  • true

filter_list

dictionary

Name of filter-list.

inbound

string

Apply policy to incoming routes.

outbound

string

Apply policy to outgoing routes.

inherit

dictionary

Inherit a template.

sequence

integer

Sequence number.

template

string

Template name.

maximum_prefix

dictionary

Maximum number of prefixes from this neighbor.

generate_warning_threshold

integer

Threshold percentage at which to generate a warning.

max_prefix_limit

integer

Maximum prefix limit.

restart_interval

integer

Restart bgp connection after limit is exceeded.

warning_only

boolean

Only give a warning message when limit is exceeded.

Choices:

  • false

  • true

next_hop_self

dictionary

Set our address as nexthop (non-reflected).

all_routes

boolean

Set our address as nexthop for all routes.

Choices:

  • false

  • true

set

boolean

Set next-hop-self attribute.

Choices:

  • false

  • true

next_hop_third_party

boolean

Compute a third-party nexthop if possible.

Choices:

  • false

  • true

prefix_list

dictionary

Apply prefix-list.

inbound

string

Apply policy to incoming routes.

outbound

string

Apply policy to outgoing routes.

rewrite_evpn_rt_asn

boolean

Auto generate RTs for EBGP neighbor.

Choices:

  • false

  • true

rewrite_rt_asn

boolean

Auto generate RTs for EBGP neighbor.

Choices:

  • false

  • true

route_map

dictionary

Apply route-map to neighbor.

inbound

string

Apply policy to incoming routes.

outbound

string

Apply policy to outgoing routes.

route_reflector_client

boolean

Configure a neighbor as Route reflector client.

Choices:

  • false

  • true

safi

string

Sub Address Family indicator.

Choices:

  • "unicast"

  • "multicast"

  • "mvpn"

  • "evpn"

send_community

dictionary

Send Community attribute to this neighbor.

both

boolean

Send Standard and Extended Community attributes.

Choices:

  • false

  • true

extended

boolean

Send Extended Community attribute.

Choices:

  • false

  • true

set

boolean

Set send-community attribute.

Choices:

  • false

  • true

standard

boolean

Send Standard Community attribute.

Choices:

  • false

  • true

soft_reconfiguration_inbound

dictionary

Soft reconfiguration.

always

boolean

Always perform inbound soft reconfiguration.

Choices:

  • false

  • true

set

boolean

Set soft-reconfiguration inbound attribute.

Choices:

  • false

  • true

soo

string

Specify Site-of-origin extcommunity.

suppress_inactive

boolean

Advertise only active routes to peer.

Choices:

  • false

  • true

unsuppress_map

string

Route-map to selectively unsuppress suppressed routes.

weight

integer

Set default weight for routes from this neighbor.

neighbor_address

string / required

IP/IPv6 address of the neighbor.

vrf

string

VRF name.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^router bgp’.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely.

Refer to examples for more details.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "parsed"

  • "gathered"

  • "rendered"

Notes

Note

  • Tested against NX-OS 9.3.6.

  • Unsupported for Cisco MDS

  • For managing BGP address family configurations please use the cisco.nxos.nxos_bgp_address_family module.

  • This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# Nexus9000v#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_bgp_neighbor_address_family: &id001
    config:
      as_number: 65536
      neighbors:
        - neighbor_address: 192.0.2.32
          address_family:
            - afi: ipv4
              safi: unicast
              maximum_prefix:
                max_prefix_limit: 20
                generate_warning_threshold: 75
              weight: 100
              prefix_list:
                inbound: rmap1
                outbound: rmap2
            - afi: ipv6
              safi: unicast
        - neighbor_address: 192.0.2.33
          address_family:
            - afi: ipv4
              safi: multicast
              inherit:
                template: BasePolicy
                sequence: 200
      vrfs:
        - vrf: site-1
          neighbors:
            - neighbor_address: 203.0.113.1
              address_family:
                - afi: ipv4
                  safi: unicast
                  suppress_inactive: true
                  next_hop_self:
                    set: true
            - neighbor_address: 203.0.113.2
              address_family:
                - afi: ipv6
                  safi: unicast
                - afi: ipv4
                  safi: multicast
                  send_community:
                    set: true

# Task output:
# ------------
#  before: {}
#
#  commands:
#  - router bgp 65536
#  - neighbor 192.0.2.32
#  - address-family ipv4 unicast
#  - maximum-prefix 20 75
#  - weight 100
#  - prefix-list rmap1 in
#  - prefix-list rmap2 out
#  - address-family ipv6 unicast
#  - neighbor 192.0.2.33
#  - address-family ipv4 multicast
#  - inherit peer-policy BasePolicy 200
#  - vrf site-1
#  - neighbor 203.0.113.1
#  - address-family ipv4 unicast
#  - suppress-inactive
#  - next-hop-self
#  - neighbor 203.0.113.2
#  - address-family ipv6 unicast
#  - address-family ipv4 multicast
#  - send-community
#
#  after:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#            maximum_prefix:
#              max_prefix_limit: 20
#              generate_warning_threshold: 75
#            weight: 100
#            prefix_list:
#              inbound: rmap1
#              outbound: rmap2
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       maximum-prefix 20 75
#       weight 100
#       prefix-list rmap1 in
#       prefix-list rmap2 out
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast
#

# Using replaced

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       maximum-prefix 20 75
#       weight 100
#       prefix-list rmap1 in
#       prefix-list rmap2 out
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast
#

- name: Replace specified neighbor AFs with given configuration
  cisco.nxos.nxos_bgp_neighbor_address_family: &replaced
    config:
      as_number: 65536
      neighbors:
        - neighbor_address: 192.0.2.32
          address_family:
            - afi: ipv4
              safi: unicast
              weight: 110
            - afi: ipv6
              safi: unicast
        - neighbor_address: 192.0.2.33
          address_family:
            - afi: ipv4
              safi: multicast
              inherit:
                template: BasePolicy
                sequence: 200
      vrfs:
        - vrf: site-1
          neighbors:
            - neighbor_address: 203.0.113.1
              address_family:
                - afi: ipv4
                  safi: unicast
            - neighbor_address: 203.0.113.2
              address_family:
                - afi: ipv6
                  safi: unicast
                - afi: ipv4
                  safi: multicast
                  send_community:
                    set: true
    state: replaced

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#            maximum_prefix:
#              max_prefix_limit: 20
#              generate_warning_threshold: 75
#            weight: 100
#            prefix_list:
#              inbound: rmap1
#              outbound: rmap2
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast
#
#  commands:
#    - router bgp 65536
#    - neighbor 192.0.2.32
#    - address-family ipv4 unicast
#    - no maximum-prefix 20 75
#    - weight 110
#    - no prefix-list rmap1 in
#    - no prefix-list rmap2 out
#    - vrf site-1
#    - neighbor 203.0.113.1
#    - address-family ipv4 unicast
#    - no suppress-inactive
#    - no next-hop-self
#
#  after:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#            weight: 110
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       weight 110
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast
#

# Using overridden

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       maximum-prefix 20 75
#       weight 100
#       prefix-list rmap1 in
#       prefix-list rmap2 out
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast
#

- name: Override all BGP AF configuration with provided configuration
  cisco.nxos.nxos_bgp_neighbor_address_family:
    config:
      as_number: 65536
      neighbors:
        - neighbor_address: 192.0.2.32
          address_family:
            - afi: ipv4
              safi: unicast
      vrfs:
        - vrf: site-1
          neighbors:
            - neighbor_address: 203.0.113.1
              address_family:
                - afi: ipv4
                  safi: unicast
                  suppress_inactive: true
                  next_hop_self:
                    set: true
    state: overridden

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#            maximum_prefix:
#              max_prefix_limit: 20
#              generate_warning_threshold: 75
#            weight: 100
#            prefix_list:
#              inbound: rmap1
#              outbound: rmap2
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast
#
#  commands:
#    - router bgp 65536
#    - neighbor 192.0.2.32
#    - address-family ipv4 unicast
#    - no maximum-prefix 20 75
#    - no weight 100
#    - no prefix-list rmap1 in
#    - no prefix-list rmap2 out
#    - no address-family ipv6 unicast
#    - neighbor 192.0.2.33
#    - no address-family ipv4 multicast
#    - vrf site-1
#    - neighbor 203.0.113.2
#    - no address-family ipv4 multicast
#    - no address-family ipv6 unicast
#
#  after:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true

# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self

# Using deleted to remove specified neighbor AFs

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       maximum-prefix 20 75
#       weight 100
#       prefix-list rmap1 in
#       prefix-list rmap2 out
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast
#

- name: Delete BGP configs handled by this module
  cisco.nxos.nxos_bgp_neighbor_address_family:
    config:
      as_number: 65536
      neighbors:
        - neighbor_address: 192.0.2.32
          address_family:
            - afi: ipv4
              safi: unicast
      vrfs:
        - vrf: site-1
          neighbors:
            - neighbor_address: 203.0.113.2
              address_family:
                - afi: ipv6
                  safi: unicast
    state: deleted

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#            maximum_prefix:
#              max_prefix_limit: 20
#              generate_warning_threshold: 75
#            weight: 100
#            prefix_list:
#              inbound: rmap1
#              outbound: rmap2
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast
#
#  commands:
#    - router bgp 65536
#    - neighbor 192.0.2.32
#    - no address-family ipv4 unicast
#    - vrf site-1
#    - neighbor 203.0.113.2
#    - no address-family ipv6 unicast
#
#  after:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#
# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#

# Using deleted to remove all neighbor AFs

# Before state:
# -------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       maximum-prefix 20 75
#       weight 100
#       prefix-list rmap1 in
#       prefix-list rmap2 out
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast
#

- name: Delete all BGP neighbor AF configs handled by this module
  cisco.nxos.nxos_bgp_neighbor_address_family:
    state: deleted

# Task output:
# ------------
#  before:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#            safi: unicast
#            maximum_prefix:
#              max_prefix_limit: 20
#              generate_warning_threshold: 75
#            weight: 100
#            prefix_list:
#              inbound: rmap1
#              outbound: rmap2
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast
#
#  commands:
#    - router bgp 65536
#    - neighbor 192.0.2.32
#    - no address-family ipv4 unicast
#    - no address-family ipv6 unicast
#    - neighbor 192.0.2.33
#    - no address-family ipv4 multicast
#    - vrf site-1
#    - neighbor 203.0.113.1
#    - no address-family ipv4 unicast
#    - neighbor 203.0.113.2
#    - no address-family ipv6 unicast
#    - no address-family ipv4 multicast
#
#  after:
#    as_number: "65536"
#
# After state:
# ------------
# Nexus9000v# show running-config | section "^router bgp"
# router bgp 65536
#   neighbor 192.0.2.32
#   neighbor 192.0.2.33
#   vrf site-1
#     neighbor 203.0.113.1
#     neighbor 203.0.113.2
#

# Using rendered

- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.nxos.nxos_bgp_neighbor_address_family:
    config:
      as_number: 65536
      neighbors:
        - neighbor_address: 192.0.2.32
          address_family:
            - afi: ipv4
              safi: unicast
              maximum_prefix:
                max_prefix_limit: 20
                generate_warning_threshold: 75
              weight: 100
              prefix_list:
                inbound: rmap1
                outbound: rmap2
            - afi: ipv6
              safi: unicast
        - neighbor_address: 192.0.2.33
          address_family:
            - afi: ipv4
              safi: multicast
              inherit:
                template: BasePolicy
                sequence: 200
      vrfs:
        - vrf: site-1
          neighbors:
            - neighbor_address: 203.0.113.1
              address_family:
                - afi: ipv4
                  safi: unicast
                  suppress_inactive: true
                  next_hop_self:
                    set: true
            - neighbor_address: 203.0.113.2
              address_family:
                - afi: ipv6
                  safi: unicast
                - afi: ipv4
                  safi: multicast
                  send_community:
                    set: true
    state: rendered

# Task output:
# ------------
#  rendered:
#    - router bgp 65536
#    - neighbor 192.0.2.32
#    - address-family ipv4 unicast
#    - maximum-prefix 20 75
#    - weight 100
#    - prefix-list rmap1 in
#    - prefix-list rmap2 out
#    - address-family ipv6 unicast
#    - neighbor 192.0.2.33
#    - address-family ipv4 multicast
#    - inherit peer-policy BasePolicy 200
#    - vrf site-1
#    - neighbor 203.0.113.1
#    - address-family ipv4 unicast
#    - suppress-inactive
#    - next-hop-self
#    - neighbor 203.0.113.2
#    - address-family ipv6 unicast
#    - address-family ipv4 multicast
#    - send-community

# Using parsed

# parsed.cfg
# ------------
# router bgp 65536
#   neighbor 192.0.2.32
#     address-family ipv4 unicast
#       maximum-prefix 20 75
#       weight 100
#       prefix-list rmap1 in
#       prefix-list rmap2 out
#     address-family ipv6 unicast
#   neighbor 192.0.2.33
#     address-family ipv4 multicast
#       inherit peer-policy BasePolicy 200
#   vrf site-1
#     neighbor 203.0.113.1
#       address-family ipv4 unicast
#         suppress-inactive
#         next-hop-self
#     neighbor 203.0.113.2
#       address-family ipv4 multicast
#         send-community
#       address-family ipv6 unicast

- name: Parse externally provided BGP neighbor AF config
  register: result
  cisco.nxos.nxos_bgp_neighbor_address_family:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output:
# ------------
#  parsed:
#    as_number: "65536"
#    neighbors:
#      - neighbor_address: 192.0.2.32
#        address_family:
#          - afi: ipv4
#           safi: unicast
#           maximum_prefix:
#              max_prefix_limit: 20
#              generate_warning_threshold: 75
#           weight: 100
#            prefix_list:
#              inbound: rmap1
#              outbound: rmap2
#          - afi: ipv6
#            safi: unicast
#      - neighbor_address: 192.0.2.33
#        address_family:
#          - afi: ipv4
#            safi: multicast
#            inherit:
#              template: BasePolicy
#              sequence: 200
#    vrfs:
#      - vrf: site-1
#        neighbors:
#          - neighbor_address: 203.0.113.1
#            address_family:
#              - afi: ipv4
#                safi: unicast
#                suppress_inactive: true
#                next_hop_self:
#                  set: true
#          - neighbor_address: 203.0.113.2
#            address_family:
#              - afi: ipv4
#                safi: multicast
#                send_community:
#                  set: true
#              - afi: ipv6
#                safi: unicast

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["router bgp 65536", "neighbor 192.0.2.32", "address-family ipv4 unicast"]

gathered

dictionary

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: "This output will always be in the same format as the module argspec.\n"

parsed

dictionary

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: "This output will always be in the same format as the module argspec.\n"

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["router bgp 65536", "neighbor 192.0.2.32", "address-family ipv4 unicast"]

Authors

  • Nilashish Chakraborty (@NilashishC)