cisco.ucs.ucs_ntp_server module – Configures NTP server on Cisco UCS Manager

Note

This module is part of the cisco.ucs collection (version 1.10.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ucs. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.ucs.ucs_ntp_server.

New in cisco.ucs 2.7

Synopsis

  • Configures NTP server on Cisco UCS Manager.

Requirements

The below requirements are needed on the host that executes this module.

  • ucsmsdk

Parameters

Parameter

Comments

description

aliases: descr

string

A user-defined description of the NTP server.

Enter up to 256 characters.

You can use any characters or spaces except the following:

` (accent mark), (backslash), ^ (carat), ” (double quote), = (equal sign), > (greater than), < (less than), or ‘ (single quote).

Default: ""

hostname

string / required

IP address or hostname of Cisco UCS Manager.

Modules can be used with the UCS Platform Emulator https://cs.co/ucspe

ntp_server

aliases: name

string

NTP server IP address or hostname.

Enter up to 63 characters that form a valid hostname.

Enter a valid IPV4 Address.

Default: ""

password

string / required

Password for Cisco UCS Manager authentication.

port

integer

Port number to be used during connection (by default uses 443 for https and 80 for http connection).

proxy

string

If use_proxy is no, specfies proxy to be used for connection. e.g. ‘http://proxy.xy.z:8080’

state

string

If absent, will remove an NTP server.

If present, will add or update an NTP server.

Choices:

  • "absent"

  • "present" ← (default)

use_proxy

boolean

If no, will not use the proxy as defined by system environment variable.

Choices:

  • false

  • true ← (default)

use_ssl

boolean

If no, an HTTP connection will be used instead of the default HTTPS connection.

Choices:

  • false

  • true ← (default)

username

string

Username for Cisco UCS Manager authentication.

Default: "admin"

Examples

- name: Configure NTP server
  cisco.ucs.ucs_ntp_server:
    hostname: 172.16.143.150
    username: admin
    password: password
    ntp_server: 10.10.10.10
    description: Internal NTP Server by IP address
    state: present

- name: Configure NTP server
  cisco.ucs.ucs_ntp_server:
    hostname: 172.16.143.150
    username: admin
    password: password
    ntp_server: pool.ntp.org
    description: External NTP Server by hostname
    state: present

- name: Remove NTP server
  cisco.ucs.ucs_ntp_server:
    hostname: 172.16.143.150
    username: admin
    password: password
    ntp_server: 10.10.10.10
    state: absent

- name: Remove NTP server
  cisco.ucs.ucs_ntp_server:
    hostname: 172.16.143.150
    username: admin
    password: password
    ntp_server: pool.ntp.org
    state: absent

Authors

  • David Soper (@dsoper2)

  • John McDonough (@movinalot)

  • CiscoUcs (@CiscoUcs)