community.aws.ecs_service module – Create, terminate, start or stop a service in ECS
Note
This module is part of the community.aws collection (version 9.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.aws.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.ecs_service.
New in community.aws 1.0.0
Synopsis
Creates or terminates ECS services.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.28.0
botocore >= 1.31.0
Parameters
Parameter |
Comments |
|---|---|
AWS access key ID. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The aws_access_key and profile options are mutually exclusive. The aws_access_key_id alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_access_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
The location of a CA Bundle to use when validating SSL certificates. The |
|
A dictionary to modify the botocore configuration. Parameters can be found in the AWS documentation https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. |
|
The capacity provider strategy to use with your service. You can specify a maximum of 6 providers per strategy. Default: |
|
How many tasks, at a minimum, should use the specified provider. |
|
Name of capacity provider. |
|
The relative percentage of the total number of launched tasks that should use the specified provider. |
|
Unique, case-sensitive identifier you provide to ensure the idempotency of the request. Up to 32 ASCII characters are allowed. Default: |
|
The name of the cluster in which the service exists. If not specified, the cluster name will be Default: |
|
Use a The Choices:
|
|
The time to wait before checking that the service is available. Default: |
|
Optional parameters that control the deployment_configuration. Format is ‘{“maximum_percent”:<integer>, “minimum_healthy_percent”:<integer>} Default: |
|
The deployment circuit breaker determines whether a service deployment will fail if the service can’t reach a steady state. |
|
If enabled, a service deployment will transition to a failed state and stop launching new tasks. Choices:
|
|
If enabled, ECS will roll back your service to the last completed deployment after a failure. Choices:
|
|
Upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment. |
|
A lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment. |
|
The deployment controller to use for the service. If no deploymenet controller is specified, the ECS controller is used. Default: |
|
The deployment controller type to use. Choices:
|
|
The count of how many instances of the service. This parameter is required when state=present. |
|
Whether or not to enable the execute command functionality for the containers in the ECS task. If enable_execute_command=true execute command functionality is enabled on all containers in the ECS task. Choices:
|
|
URL to connect to instead of the default AWS endpoints. While this can be used to connection to other AWS-compatible services the amazon.aws and community.aws collections are only tested against AWS. The The ec2_url and s3_url aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Forcibly delete the service. Required when deleting a service with >0 scale, or no target group. Choices:
|
|
Force deployment of service even if there are no changes. Choices:
|
|
Seconds to wait before health checking the freshly added/updated services. |
|
The launch type on which to run your service. Choices:
|
|
The list of ELBs defined for this service. Load balancers for an existing service cannot be updated, and it is an error to do so. When the deployment controller is CODE_DEPLOY changes to this value are simply ignored, and do not cause an error. Default: |
|
The name of the service. |
|
Network configuration of the service. Only applicable for task definitions created with network_mode=awsvpc. |
|
Whether the task’s elastic network interface receives a public IP address. Choices:
|
|
A list of security group names or group IDs to associate with the task. |
|
A list of subnet IDs to associate with the task. |
|
The placement constraints for the tasks in the service. See https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PlacementConstraint.html for more details. Default: |
|
A cluster query language expression to apply to the constraint. |
|
The type of constraint. |
|
The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules per service. Default: |
|
The field to apply the placement strategy against. |
|
The type of placement strategy. |
|
Numeric part of platform version or LATEST See https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html for more details. |
|
A named AWS profile to use for authentication. See the AWS documentation for more information about named profiles https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html. The The profile option is mutually exclusive with the aws_access_key, aws_secret_key and security_token options. |
|
Propagate tags from ECS task defintition or ECS service to ECS task. Choices:
|
|
Toggle overwriting of existing placement constraints. This is needed for backwards compatibility. By default purge_placement_constraints=false. In release 9.0.0 this will be changed to purge_placement_constraints=true. Choices:
|
|
Toggle overwriting of existing placement strategy. This is needed for backwards compatibility. By default purge_placement_strategy=false. In release 9.0.0 this will be changed to purge_placement_strategy=true. Choices:
|
|
The AWS region to use. For global services such as IAM, Route53 and CloudFront, region is ignored. The See the Amazon AWS documentation for more information http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region. The Support for the |
|
The number of times to check that the service is available. Default: |
|
The name or full Amazon Resource Name (ARN) of the IAM role that allows your Amazon ECS container agent to make calls to your load balancer on your behalf. This parameter is only required if you are using a load balancer with your service in a network mode other than Default: |
|
The scheduling strategy. Defaults to Choices:
|
|
AWS secret access key. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The secret_key and profile options are mutually exclusive. The aws_secret_access_key alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_secret_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Describes service discovery registries this service will register with. Default: |
|
Service discovery registry ARN. |
|
Container name for service discovery registration. |
|
Container port for service discovery registration. |
|
AWS STS session token for use with temporary credentials. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The security_token and profile options are mutually exclusive. Aliases aws_session_token and session_token were added in release 3.2.0, with the parameter being renamed from security_token to session_token in release 6.0.0. The security_token, aws_security_token, and access_token aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
The desired state of the service. Choices:
|
|
A dictionary of tags to add or remove from the resource. |
|
The task definition the service will run. This parameter is required when state=present unless force_new_deployment=True. This parameter is ignored when updating a service with a |
|
When set to Setting validate_certs=false is strongly discouraged, as an alternative, consider setting aws_ca_bundle instead. Choices:
|
|
Whether or not to wait for the service to be inactive. Waits only when state is Choices:
|
Notes
Note
The service role specified must be assumable. (i.e. have a trust relationship for the ecs service, ecs.amazonaws.com)
For details of the parameters and returns see https://boto3.readthedocs.io/en/latest/reference/services/ecs.html.
An IAM role must have been previously created.
Caution: For modules, environment variables and configuration files are read from the Ansible ‘host’ context and not the ‘controller’ context. As such, files may need to be explicitly copied to the ‘host’. For lookup and connection plugins, environment variables and configuration files are read from the Ansible ‘controller’ context and not the ‘host’ context.
The AWS SDK (boto3) that Ansible uses may also read defaults for credentials and other settings, such as the region, from its configuration files in the Ansible ‘host’ context (typically
~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.
Examples
# Note: These examples do not set authentication details, see the AWS Guide for details.
# Basic provisioning example
- community.aws.ecs_service:
state: present
name: console-test-service
cluster: new_cluster
task_definition: 'new_cluster-task:1'
desired_count: 0
- name: create ECS service on VPC network
community.aws.ecs_service:
state: present
name: console-test-service
cluster: new_cluster
task_definition: 'new_cluster-task:1'
desired_count: 0
network_configuration:
subnets:
- subnet-abcd1234
security_groups:
- sg-aaaa1111
- my_security_group
# Simple example to delete
- community.aws.ecs_service:
name: default
state: absent
cluster: new_cluster
# With custom deployment configuration (added in version 2.3), placement constraints and strategy (added in version 2.4)
- community.aws.ecs_service:
state: present
name: test-service
cluster: test-cluster
task_definition: test-task-definition
desired_count: 3
deployment_configuration:
minimum_healthy_percent: 75
maximum_percent: 150
placement_constraints:
- type: memberOf
expression: 'attribute:flavor==test'
placement_strategy:
- type: binpack
field: memory
# With deployment circuit breaker (added in version 4.0)
- community.aws.ecs_service:
state: present
name: test-service
cluster: test-cluster
task_definition: test-task-definition
desired_count: 3
deployment_configuration:
deployment_circuit_breaker:
enable: true
rollback: true
# With capacity_provider_strategy (added in version 4.0)
- community.aws.ecs_service:
state: present
name: test-service
cluster: test-cluster
task_definition: test-task-definition
desired_count: 1
capacity_provider_strategy:
- capacity_provider: test-capacity-provider-1
weight: 1
base: 0
# With tags and tag propagation
- community.aws.ecs_service:
state: present
name: tags-test-service
cluster: new_cluster
task_definition: 'new_cluster-task:1'
desired_count: 1
tags:
Firstname: jane
lastName: doe
propagate_tags: SERVICE
Returned Facts
Facts returned by this module are added/updated in the hostvars host facts and can be referenced by name just like any other host fact. They do not need to be registered in order to use them.
Key |
Description |
|---|---|
Details of deleted service. Returned: when service existed and was deleted |
|
The Amazon Resource Name (ARN) of the of the cluster that hosts the service. Returned: always |
|
dictionary of deploymentConfiguration Returned: always |
|
dictionary of deploymentCircuitBreaker Returned: always |
|
The state of the circuit breaker feature. Returned: always |
|
The state of the rollback feature of the circuit breaker. Returned: always |
|
maximumPercent param Returned: always |
|
minimumHealthyPercent param Returned: always |
|
list of service deployments Returned: always |
|
The desired number of instantiations of the task definition to keep running on the service. Returned: always |
|
list of service events Returned: always |
|
A list of load balancer objects Returned: always |
|
The name of the container to associate with the load balancer. Returned: always |
|
The port on the container to associate with the load balancer. Returned: always |
|
the name Returned: always |
|
The number of tasks in the cluster that are in the PENDING state. Returned: always |
|
List of placement constraints objects Returned: always |
|
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. Returned: always |
|
The type of constraint. Valid values are distinctInstance and memberOf. Returned: always |
|
List of placement strategy objects Returned: always |
|
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. Returned: always |
|
The type of placement strategy. Valid values are random, spread and binpack. Returned: always |
|
The type of tag propagation applied to the resource Returned: always |
|
The number of tasks in the cluster that are in the RUNNING state. Returned: always |
|
The Amazon Resource Name (ARN) that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. Returned: always Sample: |
|
A user-generated string used to identify the service Returned: always |
|
The valid values are ACTIVE, DRAINING, or INACTIVE. Returned: always |
|
The tags applied to this resource. Returned: when tags found |
|
The ARN of a task definition to use for tasks in the service. Returned: always |
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
Details of created service. Returned: when creating a service |
|
The capacity provider strategy to use with your service. Returned: always |
|
How many tasks, at a minimum, should use the specified provider. Returned: always |
|
Name of capacity provider. Returned: always |
|
The relative percentage of the total number of launched tasks that should use the specified provider. Returned: always |
|
The Amazon Resource Name (ARN) of the of the cluster that hosts the service. Returned: always |
|
dictionary of deploymentConfiguration Returned: always |
|
dictionary of deploymentCircuitBreaker Returned: always |
|
The state of the circuit breaker feature. Returned: always |
|
The state of the rollback feature of the circuit breaker. Returned: always |
|
maximumPercent param Returned: always |
|
minimumHealthyPercent param Returned: always |
|
list of service deployments Returned: always |
|
The desired number of instantiations of the task definition to keep running on the service. Returned: always |
|
list of service events Returned: always |
|
A list of load balancer objects Returned: always |
|
The name of the container to associate with the load balancer. Returned: always |
|
The port on the container to associate with the load balancer. Returned: always |
|
the name Returned: always |
|
The number of tasks in the cluster that are in the PENDING state. Returned: always |
|
List of placement constraints objects Returned: always |
|
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. Returned: always |
|
The type of constraint. Valid values are distinctInstance and memberOf. Returned: always |
|
List of placement strategy objects Returned: always |
|
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are CPU and MEMORY. Returned: always |
|
The type of placement strategy. Valid values are random, spread and binpack. Returned: always |
|
The type of tag propagation applied to the resource. Returned: always |
|
The number of tasks in the cluster that are in the RUNNING state. Returned: always |
|
The Amazon Resource Name (ARN) that identifies the service. The ARN contains the Returned: always Sample: |
|
A user-generated string used to identify the service Returned: always |
|
The valid values are ACTIVE, DRAINING, or INACTIVE. Returned: always |
|
The tags applied to this resource. Returned: success |
|
The ARN of a task definition to use for tasks in the service. Returned: always |