community.general.hwc_vpc_eip module – Creates a resource of Vpc/EIP in Huawei Cloud

Note

This module is part of the community.general collection (version 10.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.general.hwc_vpc_eip.

New in community.general 0.2.0

Synopsis 

elastic ip management.

Requirements 

The below requirements are needed on the host that executes this module.

keystoneauth1 >= 3.6.0

Parameters 

Parameter	Comments
dedicated_bandwidth dictionary	Specifies the dedicated bandwidth object.
charge_mode string / required	Specifies whether the bandwidth is billed by traffic or by bandwidth size. The value can be bandwidth or traffic. If this parameter is left blank or is null character string, default value bandwidth is used. For IPv6 addresses, the default parameter value is bandwidth outside China and is traffic in China.
name string / required	Specifies the bandwidth name. The value is a string of 1 to 64 characters that can contain letters, digits, underscores (`_`), hyphens (`-`), and periods (`.`).
size integer / required	Specifies the bandwidth size. The value ranges from 1 Mbit/s to 2000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.) The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows. The minimum unit is 1 Mbit/s if the allowed bandwidth size ranges from 0 to 300 Mbit/s (with 300 Mbit/s included). The minimum unit is 50 Mbit/s if the allowed bandwidth size ranges 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included). The minimum unit is 500 Mbit/s if the allowed bandwidth size is greater than 1000 Mbit/s.
domain string / required	The name of the Domain to scope to (Identity v3). Currently only domain names are supported, and not domain IDs.
enterprise_project_id string	Specifies the enterprise project ID.
id string	The ID of resource to be managed.
identity_endpoint string / required	The Identity authentication URL.
ip_version integer	The value can be 4 (IPv4 address) or 6 (IPv6 address). If this parameter is left blank, an IPv4 address will be assigned.
ipv4_address string	Specifies the obtained IPv4 EIP. The system automatically assigns an EIP if you do not specify it.
password string / required	The password to login with.
port_id string	Specifies the port ID. This parameter is returned only when a private IP address is bound with the EIP.
project string / required	The name of the Tenant (Identity v2) or Project (Identity v3). Currently only project names are supported, and not project IDs.
region string	The region to which the project belongs.
shared_bandwidth_id string	Specifies the ID of shared bandwidth.
state string	Whether the given object should exist in Huawei Cloud. Choices: `"present"` ← (default) `"absent"`
timeouts dictionary	The timeouts for each operations. Default: `{}`
create string	The timeouts for create operation. Default: `"5m"`
update string	The timeouts for update operation. Default: `"5m"`
type string / required	Specifies the EIP type.
user string / required	The user name to login with. Currently only user names are supported, and not user IDs.

Attributes 

Attribute	Support	Description
check_mode	Support: full	Can run in `check_mode` and return changed status prediction without modifying target.
diff_mode	Support: none	Will return details on what has changed (or possibly needs changing in `check_mode`), when in diff mode.

Notes 

Note

For authentication, you can set identity_endpoint using the ANSIBLE_HWC_IDENTITY_ENDPOINT environment variable.
For authentication, you can set user using the ANSIBLE_HWC_USER environment variable.
For authentication, you can set password using the ANSIBLE_HWC_PASSWORD environment variable.
For authentication, you can set domain using the ANSIBLE_HWC_DOMAIN environment variable.
For authentication, you can set project using the ANSIBLE_HWC_PROJECT environment variable.
For authentication, you can set region using the ANSIBLE_HWC_REGION environment variable.
Environment variables values will only be used if the playbook values are not set.

Examples 

# create an eip and bind it to a port
- name: Create vpc
  hwc_network_vpc:
    cidr: "192.168.100.0/24"
    name: "ansible_network_vpc_test"
  register: vpc
- name: Create subnet
  hwc_vpc_subnet:
    gateway_ip: "192.168.100.32"
    name: "ansible_network_subnet_test"
    dhcp_enable: true
    vpc_id: "{{ vpc.id }}"
    cidr: "192.168.100.0/26"
  register: subnet
- name: Create a port
  hwc_vpc_port:
    subnet_id: "{{ subnet.id }}"
    ip_address: "192.168.100.33"
  register: port
- name: Create an eip and bind it to a port
  community.general.hwc_vpc_eip:
    type: "5_bgp"
    dedicated_bandwidth:
      charge_mode: "traffic"
      name: "ansible_test_dedicated_bandwidth"
      size: 1
    port_id: "{{ port.id }}"

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
create_time string	Specifies the time (UTC time) when the EIP was assigned. Returned: success
dedicated_bandwidth dictionary	Specifies the dedicated bandwidth object. Returned: success
charge_mode string	Specifies whether the bandwidth is billed by traffic or by bandwidth size. The value can be bandwidth or traffic. If this parameter is left blank or is null character string, default value bandwidth is used. For IPv6 addresses, the default parameter value is bandwidth outside China and is traffic in China. Returned: success
id string	Specifies the ID of dedicated bandwidth. Returned: success
name string	Specifies the bandwidth name. The value is a string of 1 to 64 characters that can contain letters, digits, underscores (`_`), hyphens (`-`), and periods (`.`). Returned: success
size integer	Specifies the bandwidth size. The value ranges from 1 Mbit/s to 2000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.) The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows:. The minimum unit is 1 Mbit/s if the allowed bandwidth size ranges from 0 to 300 Mbit/s (with 300 Mbit/s included). The minimum unit is 50 Mbit/s if the allowed bandwidth size ranges 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included). The minimum unit is 500 Mbit/s if the allowed bandwidth size is greater than 1000 Mbit/s. Returned: success
enterprise_project_id string	Specifies the enterprise project ID. Returned: success
ip_version integer	The value can be 4 (IPv4 address) or 6 (IPv6 address). If this parameter is left blank, an IPv4 address will be assigned. Returned: success
ipv4_address string	Specifies the obtained IPv4 EIP. The system automatically assigns an EIP if you do not specify it. Returned: success
ipv6_address string	Specifies the obtained IPv6 EIP. Returned: success
port_id string	Specifies the port ID. This parameter is returned only when a private IP address is bound with the EIP. Returned: success
private_ip_address string	Specifies the private IP address bound with the EIP. This parameter is returned only when a private IP address is bound with the EIP. Returned: success
shared_bandwidth_id string	Specifies the ID of shared bandwidth. Returned: success
type string	Specifies the EIP type. Returned: success

Authors

Huawei Inc. (@huaweicloud)

community.general.hwc_vpc_eip module – Creates a resource of Vpc/EIP in Huawei Cloud

Synopsis

Requirements

Parameters

Attributes

Notes

Examples

Return Values