dellemc.enterprise_sonic.sonic_dhcp_relay module – Manage DHCP and DHCPv6 relay configurations on SONiC

Note

This module is part of the dellemc.enterprise_sonic collection (version 2.4.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_dhcp_relay.

New in dellemc.enterprise_sonic 2.1.0

Synopsis 

This module provides configuration management of DHCP and DHCPv6 relay parameters on Layer 3 interfaces of devices running SONiC.
Layer 3 interface and VRF name need to be created earlier in the device.

Parameters 

Parameter	Comments
config list / elements=dictionary	Specifies the DHCP and DHCPv6 relay configurations.
ipv4 dictionary	DHCP relay configurations to be set for the interface mentioned in name option.
circuit_id string	Specifies the DHCP relay circuit-id format. `%h:%p` - Hostname followed by interface name eg. sonic:Vlan100 `%i` - Name of the physical interface eg. Eth1/2 `%p` - Name of the interface eg. Vlan100 Choices: `"%h:%p"` `"%i"` `"%p"`
link_select boolean	Enable link selection suboption. Choices: `false` `true`
max_hop_count integer	Specifies the maximum hop count for DHCP relay packets. The range is from 1 to 16.
policy_action string	Specifies the policy for handling of DHCP relay options. Choices: `"append"` `"discard"` `"replace"`
server_addresses list / elements=dictionary	List of DHCP server IPv4 addresses.
address string	IPv4 address of the DHCP server.
source_interface string	Specifies the DHCP relay source interface.
vrf_name string	Specifies name of the VRF in which the DHCP server resides. This option is not used with state deleted.
vrf_select boolean	Enable VRF selection suboption. Choices: `false` `true`
ipv6 dictionary	DHCPv6 relay configurations to be set for the interface mentioned in name option.
max_hop_count integer	Specifies the maximum hop count for DHCPv6 relay packets. The range is from 1 to 16.
server_addresses list / elements=dictionary	List of DHCPv6 server IPv6 addresses.
address string	IPv6 address of the DHCPv6 server.
source_interface string	Specifies the DHCPv6 relay source interface.
vrf_name string	Specifies name of the VRF in which the DHCPv6 server resides. This option is used only with state merged.
vrf_select boolean	Enable VRF selection suboption. Choices: `false` `true`
name string / required	Full name of the Layer 3 interface, i.e. Eth1/1.
state string	The state of the configuration after module completion. `merged` - Merges provided DHCP and DHCPv6 relay configuration with on-device configuration. `deleted` - Deletes on-device DHCP and DHCPv6 relay configuration. `replaced` - Replaces on-device DHCP and DHCPv6 relay configuration of the specified interfaces with provided configuration. `overridden` - Overrides all on-device DHCP and DHCPv6 relay configurations with the provided configuration. Choices: `"merged"` ← (default) `"deleted"` `"replaced"` `"overridden"`

Examples 

# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !

  - name: Delete DHCP and DHCPv6 relay configurations
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
        - name: 'Eth1/1'
          ipv4:
            server_addresses:
              - address: '92.1.1.1'
            vrf_select: true
            max_hop_count: 5
          ipv6:
            server_addresses:
              - address: '91::1'
              - address: '92::1'
        - name: 'Eth1/2'
          ipv4:
            server_addresses:
              - address: '71.1.1.1'
              - address: '72.1.1.1'
            source_interface: 'Vlan100'
            link_select: true
            circuit_id: '%h:%p'
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 vrf VrfReg1
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 73.1.1.1
# !


# Using deleted
#
# NOTE: Support is provided in the dhcp_relay resource module for deletion of all attributes for a
# given address family (IPv4 or IPv6) by using a "special" YAML sequence specifying a server address list
# containing a single "blank" IP address under the target address family. The following example shows
# a task using this syntax for deletion of all DHCP (IPv4) configurations for an interface, but the
# equivalent syntax is supported for DHCPv6 (IPv6) as well.
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !

  - name: Delete all IPv4 DHCP relay configurations for interface Eth1/1
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
        - name: 'Eth1/1'
          ipv4:
            server_addresses:
              - address:
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !

  - name: Delete all DHCP and DHCPv6 relay configurations for interface Eth1/1
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
        - name: 'Eth1/1'
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ipv6 address 81::1/24
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !

  - name: Delete all DHCP and DHCPv6 relay configurations
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ipv6 address 81::1/24
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
# !


# Using merged
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ipv6 address 81::1/24
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1
# !

  - name: Add DHCP and DHCPv6 relay configurations
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
        - name: 'Eth1/1'
          ipv4:
            server_addresses:
              - address: '91.1.1.1'
              - address: '92.1.1.1'
            vrf_name: 'VrfReg1'
            vrf_select: true
            max_hop_count: 5
            policy_action: 'append'
          ipv6:
            server_addresses:
              - address: '91::1'
              - address: '92::1'
            max_hop_count: 5
        - name: 'Eth1/2'
          ipv4:
            server_addresses:
              - address: '73.1.1.1'
            source_interface: 'Vlan100'
            link_select: true
            circuit_id: '%h:%p'
      state: merged

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
# !


# Using replaced
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 61::1/24
#  ipv6 dhcp-relay 71::1 72::1
# !
# interface Eth1/3
#  mtu 9100
#  speed 400000
#  fec RS
#  shutdown
#  ip address 41.1.1.1/24
#  ip dhcp-relay 51.1.1.1 52.1.1.1
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 41::1/24
#  ipv6 dhcp-relay 51::1 52::1
# !

  - name: Replace DHCP and DHCPv6 relay configurations of specified interfaces
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
        - name: 'Eth1/1'
          ipv4:
            server_addresses:
              - address: '91.1.1.1'
              - address: '93.1.1.1'
              - address: '95.1.1.1'
            vrf_name: 'VrfReg1'
            vrf_select: true
          ipv6:
            server_addresses:
              - address: '93::1'
              - address: '94::1'
            source_interface: 'Vlan100'
        - name: 'Eth1/2'
          ipv4:
            server_addresses:
              - address: '73.1.1.1'
            circuit_id: '%h:%p'
      state: replaced

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 93.1.1.1 95.1.1.1 vrf VrfReg1
#  ip dhcp-relay vrf-select
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 93::1 94::1
#  ipv6 dhcp-relay source-interface Vlan100
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 73.1.1.1
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 61::1/24
# !
# interface Eth1/3
#  mtu 9100
#  speed 400000
#  fec RS
#  shutdown
#  ip address 41.1.1.1/24
#  ip dhcp-relay 51.1.1.1 52.1.1.1
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 41::1/24
#  ipv6 dhcp-relay 51::1 52::1
# !


# Using overridden
#
# Before State:
# -------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 92.1.1.1 vrf VrfReg1
#  ip dhcp-relay max-hop-count 5
#  ip dhcp-relay vrf-select
#  ip dhcp-relay policy-action append
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 91::1 92::1
#  ipv6 dhcp-relay max-hop-count 5
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 71.1.1.1 72.1.1.1 73.1.1.1
#  ip dhcp-relay source-interface Vlan100
#  ip dhcp-relay link-select
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 61::1/24
#  ipv6 dhcp-relay 71::1 72::1
# !
# interface Eth1/3
#  mtu 9100
#  speed 400000
#  fec RS
#  shutdown
#  ip address 41.1.1.1/24
#  ip dhcp-relay 51.1.1.1 52.1.1.1
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 41::1/24
#  ipv6 dhcp-relay 51::1 52::1
# !

  - name: Override DHCP and DHCPv6 relay configurations
    dellemc.enterprise_sonic.sonic_dhcp_relay:
      config:
        - name: 'Eth1/1'
          ipv4:
            server_addresses:
              - address: '91.1.1.1'
              - address: '93.1.1.1'
              - address: '95.1.1.1'
            vrf_name: 'VrfReg1'
            vrf_select: true
          ipv6:
            server_addresses:
              - address: '93::1'
              - address: '94::1'
            source_interface: 'Vlan100'
        - name: 'Eth1/2'
          ipv4:
            server_addresses:
              - address: '73.1.1.1'
            circuit_id: '%h:%p'
      state: overridden

# After State:
# ------------
#
# sonic# show running-configuration interface
# !
# interface Eth1/1
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 81.1.1.1/24
#  ip dhcp-relay 91.1.1.1 93.1.1.1 95.1.1.1 vrf VrfReg1
#  ip dhcp-relay vrf-select
#  ipv6 address 81::1/24
#  ipv6 dhcp-relay 93::1 94::1
#  ipv6 dhcp-relay source-interface Vlan100
# !
# interface Eth1/2
#  mtu 9100
#  speed 400000
#  fec RS
#  no shutdown
#  ip address 61.1.1.1/24
#  ip dhcp-relay 73.1.1.1
#  ip dhcp-relay circuit-id %h:%p
#  ipv6 address 61::1/24
# !
# interface Eth1/3
#  mtu 9100
#  speed 400000
#  fec RS
#  shutdown
#  ip address 41.1.1.1/24
#  ipv6 address 41::1/24
# !

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The resulting configuration model invocation. Returned: when changed Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
before list / elements=string	The configuration prior to the model invocation. Returned: always Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["command 1", "command 2", "command 3"]`

Authors

Arun Saravanan Balachandran (@ArunSaravananBalachandran)

dellemc.enterprise_sonic.sonic_dhcp_relay module – Manage DHCP and DHCPv6 relay configurations on SONiC

Synopsis

Parameters

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Examples 

Return Values 