dellemc.enterprise_sonic.sonic_stp module – Manage STP configuration on SONiC

Note

This module is part of the dellemc.enterprise_sonic collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_stp.

New in dellemc.enterprise_sonic 2.3.0

Synopsis

• This module provides configuration management of STP for devices running SONiC

Parameters

Parameter	Comments
config dictionary	Specifies STP configurations mstp, pvst and rapid_pvst are mutually exclusive.
global dictionary	Global STP configuration
bpdu_filter boolean	Enables edge port BPDU filter Choices: false true
bridge_priority integer	The manageable component of the bridge identifier Value must be a multiple of 4096 in the range of 0-61440
disabled_vlans list / elements=string	List of disabled STP VLANs. The value of a list item can be a single VLAN ID or a range of VLAN IDs separated by ‘-’ or ‘..’; for example 70-100 or 70..100.
enabled_protocol string	Specifies the type of STP enabled on the device Choices: "mst" "pvst" "rapid_pvst"
fwd_delay integer	Delay in seconds used by STP bridges to transition root and designated ports to forwarding Range 4-30
hello_time integer	Interval in seconds between periodic transmissions of configuration messages by designated ports Range 1-10
loop_guard boolean	The loop guard default setting for the bridge Choices: false true
max_age integer	Maximum age in seconds of the information transmitted by the bridge when it is the root bridge Range 6-40
portfast boolean	Enables PortFast globally on all access ports Configurable for pvst protocol Choices: false true
root_guard_timeout integer	Specifies root guard recovery timeout in seconds before the port is moved back to forwarding state Range 5-600
interfaces list / elements=dictionary	Interfaces STP configuration
bpdu_filter boolean	Enables edge port BPDU filter Choices: false true
bpdu_guard boolean	Enable edge port BPDU guard Choices: false true
cost integer	The port’s contribution, when it is the root port, to the root path cost for the bridge Range 1-200000000
edge_port boolean	Configure interface as an STP edge port Choices: false true
guard string	Enables root guard or loop guard Choices: "loop" "root" "none"
intf_name string / required	Name of interface
link_type string	Specifies the interface’s link type Choices: "point-to-point" "shared"
port_priority integer	The manageable component of the port identifier Range 0-240
portfast boolean	Enable/Disable portfast on specified interface Configurable for pvst protocol Choices: false true
shutdown boolean	Port to be shutdown when it receives a BPDU Choices: false true
stp_enable boolean	Enables STP on the interface Choices: false true
uplink_fast boolean	Enables uplink fast Choices: false true
mstp dictionary	Multi STP configuration
fwd_delay integer	Delay in seconds used by STP bridges to transition root and designated ports to forwarding Range 4-30
hello_time integer	Interval in seconds between periodic transmissions of configuration messages by designated ports Range 1-10
max_age integer	Maximum age in seconds of the information transmitted by the bridge when it is the root bridge Range 6-40
max_hop integer	Number of bridges in an MST region that a BPDU can traverse before it is discarded Range 1-40
mst_instances list / elements=dictionary	Configuration for MST instances
bridge_priority integer	The manageable component of the bridge identifier Value must be a multiple of 4096 in the range of 0-61440
interfaces list / elements=dictionary	List of STP enabled interfaces
cost integer	The port’s contribution, when it is the root port, to the root path cost for the bridge Range 1-200000000
intf_name string / required	Reference to the STP interface
port_priority integer	The manageable component of the port identifier, range 0-240
mst_id integer / required	Value used to identify MST instance, range 0-4094
vlans list / elements=string	List of VLANs mapped to the MST instance. The value of a list item can be a single VLAN ID or a range of VLAN IDs separated by ‘-’ or ‘..’; for example 70-100 or 70..100.
mst_name string	Name of the MST configuration identifier
revision integer	Revision level of the MST configuration identifier, range 0-65535
pvst list / elements=dictionary	Per VLAN STP configuration
bridge_priority integer	The manageable component of the bridge identifier Value must be a multiple of 4096 in the range of 0-61440
fwd_delay integer	Delay in seconds used by STP bridges to transition root and designated ports to forwarding Range 4-30
hello_time integer	Interval in seconds between periodic transmissions of configuration messages by designated ports Range 1-10
interfaces list / elements=dictionary	List of STP enabled interfaces
cost integer	The port’s contribution, when it is the root port, to the root path cost for the bridge Range 1-200000000
intf_name string / required	Reference to the STP interface
port_priority integer	The manageable component of the port identifier, range 0-240
max_age integer	Maximum age in seconds of the information transmitted by the bridge when it is the root bridge Range 6-40
vlan_id integer / required	VLAN identifier, range 1-4094
rapid_pvst list / elements=dictionary	Rapid per VLAN STP configuration
bridge_priority integer	The manageable component of the bridge identifier Value must be a multiple of 4096 in the range of 0-61440
fwd_delay integer	Delay in seconds used by STP bridges to transition root and designated ports to forwarding Range 4-30
hello_time integer	Interval in seconds between periodic transmissions of configuration messages by designated ports Range 1-10
interfaces list / elements=dictionary	List of STP enabled interfaces
cost integer	The port’s contribution, when it is the root port, to the root path cost for the bridge Range 1-200000000
intf_name string / required	Reference to the STP interface
port_priority integer	The manageable component of the port identifier, range 0-240
max_age integer	Maximum age in seconds of the information transmitted by the bridge when it is the root bridge Range 6-40
vlan_id integer / required	VLAN identifier, range 1-4094
state string	The state of the configuration after module completion Choices: "merged" ← (default) "deleted" "replaced" "overridden"

Notes

Note

• Tested against Enterprise SONiC Distribution by Dell Technologies.

• Supports check_mode.

Examples

# Using merged
#
# Before State:
# -------------
#
# sonic# show running-configuration spanning-tree
# (No spanning-tree configuration present)

- name: Merge STP configurations
  dellemc.enterprise_sonic.sonic_stp:
    config:
      global:
        enabled_protocol: mst
        loop_guard: true
        bpdu_filter: true
        disabled_vlans:
          - 4-6
        hello_time: 5
        max_age: 10
        fwd_delay: 20
        bridge_priority: 4096
      interfaces:
        - intf_name: Ethernet20
          edge_port: true
          link_type: shared
          guard: loop
          bpdu_guard: true
          bpdu_filter: true
          uplink_fast: true
          shutdown: true
          cost: 20
          port_priority: 30
          stp_enable: true
      mstp:
        mst_name: mst1
        revision: 1
        max_hop: 3
        hello_time: 6
        max_age: 9
        fwd_delay: 12
        mst_instances:
          - mst_id: 1
            bridge_priority: 2048
            vlans:
              - 1
            interfaces:
              - intf_name: Ethernet20
                cost: 60
                port_priority: 65
    state: merged

# After State:
# ------------
#
# sonic# show running-configuration spanning-tree
#  no spanning-tree vlan 4-6
#  spanning-tree mode mst
#  spanning-tree edge-port bpdufilter default
#  spanning-tree forward-time 20
#  spanning-tree hello-time 5
#  spanning-tree max-age 10
#  spanning-tree loopguard default
#  spanning-tree mst hello-time 6
#  spanning-tree mst forward-time 12
#  spanning-tree mst max-age 9
#  spanning-tree mst max-hops 3
#  spanning-tree mst 1 priority 2048
#  !
#  spanning-tree mst configuration
#   name mst1
#   revision 1
#   instance 1 vlan 1
#   activate
#  !
#  interface Ethernet20
#   spanning-tree bpdufilter enable
#   spanning-tree guard loop
#   spanning-tree bpduguard port-shutdown
#   spanning-tree cost 20
#   spanning-tree link-type shared
#   spanning-tree port-priority 30
#   spanning-tree port type edge
#   spanning-tree uplinkfast
#   spanning-tree mst 1 cost 60
#   spanning-tree mst 1 port-priority 65


# Using replaced
#
# Before State:
# -------------
#
# sonic# show running-configuration spanning-tree
#  no spanning-tree vlan 4-6
#  spanning-tree mode mst
#  spanning-tree edge-port bpdufilter default
#  spanning-tree loopguard default
#  spanning-tree mst hello-time 6
#  spanning-tree mst forward-time 12
#  spanning-tree mst max-age 9
#  spanning-tree mst max-hops 3
#  spanning-tree mst 1 priority 2048
#  !
#  spanning-tree mst configuration
#   name mst1
#   revision 1
#   instance 1 vlan 1
#   activate
#  !
#  interface Ethernet20
#   spanning-tree bpdufilter enable
#   spanning-tree guard loop
#   spanning-tree bpduguard port-shutdown
#   spanning-tree cost 20
#   spanning-tree link-type shared
#   spanning-tree port-priority 30
#   spanning-tree port type edge
#   spanning-tree uplinkfast
#   spanning-tree mst 1 cost 60
#   spanning-tree mst 1 port-priority 65

- name: Replace STP configurations
  dellemc.enterprise_sonic.sonic_stp:
    config:
      interfaces:
        - intf_name: Ethernet20
          cost: 25
          port_priority: 35
      mstp:
        mst_name: mst2
        revision: 2
        max_hop: 4
        hello_time: 7
        max_age: 10
        fwd_delay: 13
    state: replaced

# After State:
# ------------
#
# sonic# show running-configuration spanning-tree
#  no spanning-tree vlan 4-6
#  spanning-tree mode mst
#  spanning-tree edge-port bpdufilter default
#  spanning-tree loopguard default
#  spanning-tree mst hello-time 7
#  spanning-tree mst forward-time 13
#  spanning-tree mst max-age 10
#  spanning-tree mst max-hops 4
#  !
#  spanning-tree mst configuration
#   name mst2
#   revision 2
#   activate
#  !
#  interface Ethernet20
#   spanning-tree cost 25
#   spanning-tree port-priority 35


# Using overridden
#
# Before State:
# -------------
#
# sonic# show running-configuration spanning-tree
#  no spanning-tree vlan 4-6
#  spanning-tree mode mst
#  spanning-tree edge-port bpdufilter default
#  spanning-tree loopguard default
#  spanning-tree mst hello-time 7
#  spanning-tree mst forward-time 13
#  spanning-tree mst max-age 10
#  spanning-tree mst max-hops 4
#  !
#  spanning-tree mst configuration
#   name mst2
#   revision 2
#   activate
#  !
#  interface Ethernet20
#   spanning-tree cost 25
#   spanning-tree port-priority 35

- name: Override STP configurations
  dellemc.enterprise_sonic.sonic_stp:
    config:
      global:
        enabled_protocol: pvst
        bpdu_filter: true
        root_guard_timeout: 25
        portfast: true
        hello_time: 5
        max_age: 10
        fwd_delay: 20
        bridge_priority: 4096
      pvst:
        - vlan_id: 1
          hello_time: 4
          max_age: 6
          fwd_delay: 8
          bridge_priority: 4096
          interfaces:
            - intf_name: Ethernet20
              cost: 10
              port_priority: 50
    state: overridden

# After State:
# ------------
#
# sonic# show running-configuration spanning-tree
#  spanning-tree mode pvst
#  spanning-tree edge-port bpdufilter default
#  spanning-tree forward-time 20
#  spanning-tree guard root timeout 25
#  spanning-tree hello-time 5
#  spanning-tree max-age 10
#  spanning-tree priority 4096
#  spanning-tree portfast default
#  spanning-tree vlan 1 hello-time 4
#  spanning-tree vlan 1 forward-time 8
#  spanning-tree vlan 1 max-age 6
# sonic# show running-configuration interface Ethernet 20 | grep spanning-tree
#  spanning-tree vlan 1 cost 10
#  spanning-tree vlan 1 port-priority 50


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration spanning-tree
#  spanning-tree mode pvst
#  spanning-tree edge-port bpdufilter default
#  spanning-tree forward-time 20
#  spanning-tree guard root timeout 25
#  spanning-tree hello-time 5
#  spanning-tree max-age 10
#  spanning-tree priority 4096
#  spanning-tree portfast default
#  spanning-tree vlan 1 hello-time 4
#  spanning-tree vlan 1 forward-time 8
#  spanning-tree vlan 1 max-age 6
# sonic# show running-configuration interface Ethernet 20 | grep spanning-tree
#  spanning-tree vlan 1 cost 10
#  spanning-tree vlan 1 port-priority 50

- name: Delete STP configurations
  dellemc.enterprise_sonic.sonic_stp:
    config:
      global:
        bpdu_filter: true
        root_guard_timeout: 25
      pvst:
        - vlan_id: 1
          interfaces:
            - intf_name: Ethernet20
    state: deleted

# After State:
# ------------
#
# sonic# show running-configuration spanning-tree
# spanning-tree mode pvst
# spanning-tree forward-time 20
# spanning-tree hello-time 5
# spanning-tree max-age 10
# spanning-tree priority 4096
# spanning-tree portfast default
# spanning-tree vlan 1 hello-time 4
# spanning-tree vlan 1 forward-time 8
# spanning-tree vlan 1 max-age 6
# sonic# show running-configuration interface Ethernet 20 | grep spanning-tree
# (No spanning-tree configuration present)

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The resulting configuration module invocation. Returned: when changed Sample: ["The configuration returned will always be in the same format as the parameters above.\n"]
after(generated) list / elements=string	The generated configuration module invocation. Returned: when check_mode Sample: ["The configuration returned will always be in the same format as the parameters above.\n"]
before list / elements=string	The configuration prior to the module invocation. Returned: always Sample: ["The configuration returned will always be in the same format as the parameters above.\n"]
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: ["command 1", "command 2", "command 3"]

Authors

• Shade Talabi (@stalabi1)

Collection links

• Issue Tracker
• Repository (Sources)