f5networks.f5_modules.bigip_message_routing_router module – Manages router profiles for message-routing protocols

Note

This module is part of the f5networks.f5_modules collection (version 1.33.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_message_routing_router.

New in f5networks.f5_modules 1.0.0

Synopsis 

Manages router profiles for message-routing protocols.

Parameters 

Parameter	Comments
description string	The user-defined description of the router profile.
ignore_client_port boolean	When `true`, the remote port on clientside connections (connections where the peer connected to the BIG-IP) is ignored when searching for an existing connection. Choices: `false` `true`
inherited_traffic_group boolean	When set to `true`, the `traffic_group` is inherited from the containing folder. When not specified, the system sets this to `false` when creating new router profile. Choices: `false` `true`
max_pending_bytes integer	The maximum number of bytes worth of pending messages that will be held while waiting for a connection to a peer to be created. Once reached, any additional messages to the peer will be flagged as undeliverable and returned to the originator. The accepted range is between 0 and 4294967295 inclusive.
max_pending_messages integer	The maximum number of pending messages that will be held while waiting for a connection to a peer to be created. Once reached, any additional messages to the peer will be flagged as undeliverable and returned to the originator. The accepted range is between 0 and 65535 inclusive.
max_retries integer	Sets the maximum number of time a message may be resubmitted for rerouting by the `MR::retry` iRule command. The accepted range is between 0 and 4294967295 inclusive.
mirror boolean	Enables or disables state mirroring. State mirroring can be used to maintain the same state information in the standby unit that is in the active unit. Choices: `false` `true`
mirrored_msg_sweeper_interval integer	Specifies the maximum time in milliseconds that a message will be held on the standby device as it waits for the active device to route the message. Messages on the standby device held for longer than the configurable sweeper interval, will be dropped. The acceptable range is between 0 and 4294967295 inclusive.
name string / required	Specifies the name of the router profile.
parent string	The parent template of this router profile. Once this value has been set, it cannot be changed. The default values are set by the system if not specified and they correspond to the router type created, for example, `/Common/messagerouter` for `generic` `type` and so on.
partition string	Device partition to create router profile on. Default: `"Common"`
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing. Choices: `false` ← (default) `true`
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable `F5_PASSWORD`.
server string / required	The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`. Default: `443`
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: `"rest"` ← (default)
user string / required	The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`. Choices: `false` `true` ← (default)
routes list / elements=string	Specifies a list of static routes for the router instance to use. The route must be on the same partition as router profile.
state string	When `present`, ensures the router profile exists. When `absent`, ensures the router profile is removed. Choices: `"present"` ← (default) `"absent"`
traffic_group string	Specifies the traffic-group of the router profile. Setting the `traffic_group` to an empty string value `""` will cause the device to inherit from containing folder, which means the value of `inherited_traffic_group` on device will be `true`.
type string	Parameter used to specify the type of the router profile to manage. Default setting is `generic` with more options coming. Choices: `"generic"` ← (default)
use_local_connection boolean	If `true`, the router will route a message to an existing connection on the same TMM as the message was received. Choices: `false` `true`

Notes 

Note

Requires BIG-IP >= 14.0.0
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples 

- name: Create a generic router profile
  bigip_message_routing_router:
    name: foo
    max_retries: 10
    ignore_client_port: true
    routes:
      - /Common/route1
      - /Common/route2
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Modify a generic router profile
  bigip_message_routing_router:
    name: foo
    ignore_client_port: false
    mirror: true
    mirrored_msg_sweeper_interval: 4000
    traffic_group: /Common/traffic-group-2
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove a generic router profile
  bigip_message_routing_router:
    name: foo
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
description string	The user-defined description of the router profile. Returned: changed Sample: `"My description"`
ignore_client_port boolean	Enables ignoring of the remote port on clientside connections when searching for an existing connection. Returned: changed Sample: `false`
inherited_traffic_group boolean	Specifies if a traffic-group should be inherited from containing folder. Returned: changed Sample: `true`
max_pending_bytes integer	The maximum number of bytes worth of pending messages that will be held. Returned: changed Sample: `10000`
max_pending_messages integer	The maximum number of pending messages that will be held. Returned: changed Sample: `64`
max_retries integer	The maximum number of time a message may be resubmitted for rerouting. Returned: changed Sample: `10`
mirror boolean	Enables or disables state mirroring. Returned: changed Sample: `true`
mirrored_msg_sweeper_interval integer	The maximum time in milliseconds that a message will be held on the standby device. Returned: changed Sample: `2000`
parent string	The parent template of this router profile. Returned: changed Sample: `"/Common/messagerouter"`
routes list / elements=string	The list of static routes for the router instance to use. Returned: changed Sample: `["/Common/route1", "/Common/route2"]`
traffic_group string	The traffic-group of the router profile. Returned: changed Sample: `"/Common/traffic-group-1"`
use_local_connection boolean	Enables routing of messages to an existing connection on the same TMM as the message was received. Returned: changed Sample: `true`

Authors

Wojciech Wypior (@wojtek0806)

f5networks.f5_modules.bigip_message_routing_router module – Manages router profiles for message-routing protocols

Synopsis

Parameters

Notes

Examples

Return Values