f5networks.f5_modules.bigip_profile_dns module – Manage DNS profiles on a BIG-IP

Note

This module is part of the f5networks.f5_modules collection (version 1.33.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_profile_dns.

New in f5networks.f5_modules 1.0.0

Synopsis

  • Manage DNS profiles on a BIG-IP. There are many DNS profiles options, each with their own adjustments to the standard dns profile. Users of this module should be aware that many of the configurable options have no module default. Instead, the default is assigned by the BIG-IP system itself which, in most cases, is acceptable.

Parameters

Parameter

Comments

cache_name

string

Specifies the user-created cache the system uses to cache DNS responses.

When you select a cache for the system to use, you must also set enable_dns_cache to true

enable_cache

boolean

Specifies whether the system caches DNS responses.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

When true, the BIG-IP system caches DNS responses handled by the virtual servers associated with this profile. When you enable this setting, you must also specify a value for cache_name.

When false, the BIG-IP system does not cache DNS responses handled by the virtual servers associated with this profile. However, the profile retains the association with the DNS cache in the cache_name parameter. Disable this setting when you want to debug the system.

Choices:

  • false

  • true

enable_dns_express

boolean

Specifies whether the DNS Express engine is enabled.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

The DNS Express engine receives zone transfers from the authoritative DNS server for the zone. If the enable_zone_transfer setting is also true on this profile, the DNS Express engine also responds to zone transfer requests made by the nameservers configured as zone transfer clients for the DNS Express zone.

Choices:

  • false

  • true

enable_dns_firewall

boolean

Specifies whether the DNS firewall is enabled.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

Choices:

  • false

  • true

enable_dnssec

boolean

Specifies whether the system signs responses with DNSSEC keys and replies to DNSSEC specific queries (for example, DNSKEY query type).

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

Choices:

  • false

  • true

enable_gtm

boolean

Specifies whether the system uses Global Traffic Manager (now BIG-IP DNS) to manage the response.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

Choices:

  • false

  • true

enable_zone_transfer

boolean

Specifies whether the system answers zone transfer requests for a DNS zone created on the system.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

The enable_dns_express and enable_zone_transfer settings on a DNS profile affect how the system responds to zone transfer requests.

When the enable_dns_express and enable_zone_transfer settings are both true, if a zone transfer request matches a DNS Express zone, DNS Express answers the request.

When the enable_dns_express setting is no and the enable_zone_transfer setting is true, the BIG-IP system processes zone transfer requests based on the last action and answers the request from local BIND or a pool member.

Choices:

  • false

  • true

name

string / required

Specifies the name of the DNS profile.

parent

string

Specifies the profile from which this profile inherits settings.

When creating a new profile, if this parameter is not specified, the default is the system-supplied dns profile.

partition

string

Device partition to manage resources on.

Default: "Common"

process_recursion_desired

boolean

Specifies whether to process client-side DNS packets with Recursion Desired set in the header.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

If set to false, processing of the packet is subject to the unhandled-query-action option.

Choices:

  • false

  • true

provider

dictionary

added in f5networks.f5_modules 1.0.0

A dict object containing connection details.

auth_provider

string

Configures the auth provider for to obtain authentication tokens from the remote device.

This option is really used when working with BIG-IQ devices.

no_f5_teem

boolean

If yes, TEEM telemetry data is not sent to F5.

You may omit this option by setting the environment variable F5_TELEMETRY_OFF.

Previously used variable F5_TEEM is deprecated as its name was confusing.

Choices:

  • false ← (default)

  • true

password

aliases: pass, pwd

string / required

The password for the user account used to connect to the BIG-IP or the BIG-IQ.

You may omit this option by setting the environment variable F5_PASSWORD.

server

string / required

The BIG-IP host or the BIG-IQ host.

You may omit this option by setting the environment variable F5_SERVER.

server_port

integer

The BIG-IP server port.

You may omit this option by setting the environment variable F5_SERVER_PORT.

Default: 443

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

transport

string

Configures the transport connection to use when connecting to the remote device.

Choices:

  • "rest" ← (default)

user

string / required

The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device.

You may omit this option by setting the environment variable F5_USER.

validate_certs

boolean

If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.

You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

Choices:

  • false

  • true ← (default)

state

string

When present, ensures the profile exists.

When absent, ensures the profile is removed.

Choices:

  • "present" ← (default)

  • "absent"

unhandled_query_action

string

Specifies the action to take when a query does not match a Wide IP or a DNS Express Zone.

When allow, the BIG-IP system forwards queries to a DNS server or pool member. If a pool is not associated with a listener and the Use BIND Server on BIG-IP setting is set to Enabled, requests are forwarded to the local BIND server.

When drop, the BIG-IP system does not respond to the query.

When reject, the BIG-IP system returns the query with the REFUSED return code.

When hint, the BIG-IP system returns the query with a list of root name servers.

When no-error, the BIG-IP system returns the query with the NOERROR return code.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

Choices:

  • "allow"

  • "drop"

  • "reject"

  • "hint"

  • "no-error"

use_local_bind

boolean

Specifies whether the system forwards non-wide IP queries to the local BIND server on the BIG-IP system.

For best performance, disable this setting when using a DNS cache.

When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.

Choices:

  • false

  • true

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

  • Requires BIG-IP software version >= 12.

  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a DNS profile
  bigip_profile_dns:
    name: foo
    enable_dns_express: false
    enable_dnssec: false
    enable_gtm: false
    process_recursion_desired: false
    use_local_bind: false
    enable_dns_firewall: true
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

cache_name

string

Name of the cache used by DNS.

Returned: changed

Sample: "/Common/cache1"

enable_cache

boolean

Whether DNS caching is enabled or not.

Returned: changed

Sample: false

enable_dns_express

boolean

Whether DNS Express is enabled on the resource or not.

Returned: changed

Sample: true

enable_dns_firewall

boolean

Whether DNS firewall capability is enabled or not.

Returned: changed

Sample: false

enable_dnssec

boolean

Whether DNSSEC is enabled on the resource or not.

Returned: changed

Sample: false

enable_gtm

boolean

Whether GTM is used to manage the resource or not.

Returned: changed

Sample: true

enable_zone_transfer

boolean

Whether zone transfer are enabled on the resource or not.

Returned: changed

Sample: false

process_recursion_desired

boolean

Whether client-side DNS packets are processed with Recursion Desired set.

Returned: changed

Sample: true

unhandled_query_action

string

What to do with unhandled queries

Returned: changed

Sample: "allow"

use_local_bind

boolean

Whether non-wide IP queries are forwarded to the local BIND server or not.

Returned: changed

Sample: false

Authors

  • Tim Rupp (@caphrim007)